Disentangling water, ion and polymer dynamics in an anion exchange membrane

Polyoxometalate-based plasmonic electron sponge membrane for nanofluidic osmotic energy conversion

Nanofluidic membranes have demonstrated great potential in harvesting osmotic energy. However, the output power densities are usually hampered by insufficient membrane permselectivity. Herein, we design a polyoxometalates (POMs)-based nanofluidic plasmonic electron sponge membrane (PESM) for highly efficient osmotic energy conversion. Under light irradiation, hot electrons are generated on Au NPs surface and then transferred and stored in POMs electron sponges, while hot holes are consumed by water. The stored hot electrons in POMs increase the charge density and hydrophilicity of PESM, resulting in significantly improved permselectivity for high-performance osmotic energy conversion. In addition, the unique ionic current rectification (ICR) property of the prepared nanofluidic PESM inhibits ion concentration polarization effectively, which could further improve its permselectivity. Under light with 500-fold NaCl gradient, the maximum output power density of the prepared PESM reaches 70.4 W m-2, which is further enhanced even to 102.1 W m-2 by changing the ligand to P5W30. This work highlights the crucial roles of plasmonic electron sponge for tailoring the surface charge, modulating ion transport dynamics, and improving the performance of nanofluidic osmotic energy conversion.

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

Dual reinforced composite membranes from in-situ ionic crosslinked quaternized chitosan filled quaternized polyvinylidene fluoride nanofiber for alkaline direct methanol fuel cell

The main obstacle of high-performance cationic functionalization chitosan (CS) as anion exchange membranes (AEMs) is the trade-off between mechanical stability and ionic conductivity. Here, in-situ ionic crosslinking between the deprotonated hydroxyl group and quaternary ammonium group under alkaline conditions was ingeniously applied to improve the mechanical stability of highly quaternized CS (HQCS) with high IEC (>2 mmol g-1). Meanwhile, to further reduce the swelling and enhance the hydroxide conductivity, a mechanically robust hydroxide ion conduction network, quaternized electrospun poly(vinylidene fluoride) (QPVDF) nanofiber, was subsequently used as the filling substrate of in-situ crosslinked HQCS to prepare dual reinforced thin AEMs. The introduction of a robust QPVDF nanofiber mat can not only greatly improve the mechanical properties and limit swelling, but also create facile ion transport channels. Notably, the HQCS/QPVDF-74.0 composite membrane demonstrates perfect dimensional stability, high mechanical performance and excellent alkaline stability, as well as superior ionic conductivity of 66.2 mS cm-1 at 80 °C. The thus assembled alkaline direct methanol fuel cell displays a maximum power density of 132.30 mW cm-2 using 5 M KOH and 3 M methanol as fuels at 80 °C with satisfactory durability.

Near-frictionless ion transport within triazine framework membranes

The enhancement of separation processes and electrochemical technologies such as water electrolysers^1,2, fuel cells^3,4, redox flow batteries^5,6 and ion-capture electrodialysis⁷ depends on the development of low-resistance and high-selectivity ion-transport membranes. The transport of ions through these membranes depends on the overall energy barriers imposed by the collective interplay of pore architecture and pore-analyte interaction^8,9. However, it remains challenging to design efficient, scaleable and low-cost selective ion-transport membranes that provide ion channels for low-energy-barrier transport. Here we pursue a strategy that allows the diffusion limit of ions in water to be approached for large-area, free-standing, synthetic membranes using covalently bonded polymer frameworks with rigidity-confined ion channels. The near-frictionless ion flow is synergistically fulfilled by robust micropore confinement and multi-interaction between ion and membrane, which afford, for instance, a Na⁺ diffusion coefficient of 1.18 × 10^-9 m² s^-1, close to the value in pure water at infinite dilution, and an area-specific membrane resistance as low as 0.17 Ω cm². We demonstrate highly efficient membranes in rapidly charging aqueous organic redox flow batteries that deliver both high energy efficiency and high-capacity utilization at extremely high current densities (up to 500 mA cm^-2), and also that avoid crossover-induced capacity decay. This membrane design concept may be broadly applicable to membranes for a wide range of electrochemical devices and for precise molecular separation.

Recent Advances in Water-Splitting Electrocatalysts Based on Electrodeposition

Green hydrogen is being considered as a next-generation sustainable energy source. It is created electrochemically by water splitting with renewable electricity such as wind, geothermal, solar, and hydropower. The development of electrocatalysts is crucial for the practical production of green hydrogen in order to achieve highly efficient water-splitting systems. Due to its advantages of being environmentally friendly, economically advantageous, and scalable for practical application, electrodeposition is widely used to prepare electrocatalysts. There are still some restrictions on the ability to create highly effective electrocatalysts using electrodeposition owing to the extremely complicated variables required to deposit uniform and large numbers of catalytic active sites. In this review article, we focus on recent advancements in the field of electrodeposition for water splitting, as well as a number of strategies to address current issues. The highly catalytic electrodeposited catalyst systems, including nanostructured layered double hydroxides (LDHs), single-atom catalysts (SACs), high-entropy alloys (HEAs), and core-shell structures, are intensively discussed. Lastly, we offer solutions to current problems and the potential of electrodeposition in upcoming water-splitting electrocatalysts.

Tailoring water structure with high-tetrahedral-entropy for antifreezing electrolytes and energy storage at -80 °C

One of unsolved puzzles about water lies in how ion-water interplay affects its freezing point. Here, we report the direct link between tetrahedral entropy and the freezing behavior of water in Zn²⁺-based electrolytes by analyzing experimental spectra and molecular simulation results. A higher tetrahedral entropy leads to lower freezing point, and the freezing temperature is directly related to the entropy value. By tailoring the entropy of water using different anions, we develop an ultralow temperature aqueous polyaniline| |Zn battery that exhibits a high capacity (74.17 mAh g^-1) at 1 A g^-1 and -80 °C with ~85% capacity retention after 1200 cycles due to the high electrolyte ionic conductivity (1.12 mS cm^-1). Moreover, an improved cycling life is achieved with ~100% capacity retention after 5000 cycles at -70 °C. The fabricated battery delivers appreciably enhanced performance in terms of frost resistance and stability. This work serves to provide guidance for the design of ultralow temperature aqueous batteries by precisely tuning the water structure within electrolytes.

Optimization of a Perovskite Oxide-Based Cathode Catalyst Layer on Performance of Direct Ammonia Fuel Cells

To maximize fuel cell performance, transport pathways for electrons, ions, and reactants should be connected well. This demands a well-constructed microstructure in the catalyst layer (CL). Herein we design and optimize a cathode CL for a direct ammonia fuel cell (DAFC) using a perovskite oxide as the catalyst to reduce reliance on platinum group metals (PGMs). The effects of tailoring carbon, ionomer, and polytetrafluoroethylene (PTFE) content in cathode CLs (CCLs) were explored, and several DAFCs were tested. Using the same catalyst and operating conditions, the lowest maximum current density and peak power density obtained were 85.3 mA cm^-2 and 5.92 mW cm^-2, respectively, which substantially increased to 317 mA cm^-2 and 30.1 mW cm^-2 through proper carbon, ionomer, and PTFE optimization, illustrating the importance of an effective three-phase interface. The findings reveal that despite employment of an active catalyst for oxygen reduction at the cathode site, the true performance of the catalyst cannot be reflected unless it is supported by proper design of the CCL. The study also reveals that by optimizing the CCL, similar performances to those of Pt/C-based CCLs in literature can be obtained at a cost reduction.

Plasma-enhanced microbial electrolytic disinfection: Decoupling electro- and plasma-chemistry in plasma-electrolyzed oxidizing water using ion-exchange membranes

Pathogenic microorganisms pose a global threat to public health and environment. Common antibacterial chemicals produce toxic residues, inevitably harming the environment. Electrolyzed oxidizing water (EOW), a promising environment-friendly alternative disinfectant, still lacks effective production processes, sufficient bactericidal efficacy and stability, while the enabling physico-chemical mechanisms remain unclear. Here, we report, for the first time, an effective hybrid plasma electrochemical EOW production process and reveal the mechanisms by combining nonthermal plasmas and a two-chamber electrochemical cell separated by a cation exchange membrane (CEM) for decoupling the chemical reactions during the plasma treatment of water. Experimental results demonstrate that combined chlorine (chloramine) was the main chlorine product in the plasma-enhanced EOW (P-EOW) without a membrane, owing to the consumption of free chlorine  (Cl₂, HOCl, ClO^-) by plasma-generated reactive nitrogen species. With a CEM in the plasma electrolysis system and through controlling the plasma discharge polarity, the production of free chlorine and other reactive species can be selectively controlled, with the highest concentration of free chlorine obtained in the negative plasma-enhanced EOW (NP-EOW). According to the transportation of cations by the CEM, the high concentrations of free chlorine may be attributed to the higher consuptions of H⁺ in cathode cell of negative plasma. The study of antibacterial ability of EOW produced under different conditions revealed that Staphylococcus aureus cells were best inactivated by the NP-EOW with CEM, which is mainly attributed to the higher concentration of free chlorine. This study demonstrates the feasibility of plasma-enhanced microbial electrolytic disinfection and offers new insights into the fundamental aspects of P-EOW chemistries for the future development of sustainable, efficient, and cost-effective multipurpose sustainable chemical technologies for water research and treatment.

Fast Hydroxide Conduction via Hydrogen-Bonding Network Confined in Benzimidazolium-Functionalized Covalent Organic Frameworks

In both hydrophobic and hydrophilic nanochannels, confined water clusters spontaneously form dense internal hydrogen bond networks and hence exhibit fast mass-transfer kinetics. Covalent organic frameworks (COFs), a porous polymer, enables one-dimensional open channels to achieve ordered assembly guided by synthetic techniques and allows the accommodation of a large number of water molecules within the nanochannels. In the field of alkaline anion exchange membrane fuel cells, it has been a long-term pursuit of scientists to build abundant hydrogen bonds around hydrogen oxides (OH^-) to improve the conduction of OH^- by increasing the water content. Here, we designed and synthesized a OH^- conductor by assembling benzimidazolium into COFs, and a significantly high conductivity of 10^-1 S cm^-1 was achieved at 353 K. Theoretical calculations showed that the water clusters confined in the pores of COFs and the regularly arranged hydroxides cooperatively formed a dense hydrogen bond network and OH^- conducted diffusive conduction through the Grotthuss hopping of protons in this hydrogen bond network.

Anion-exchange membrane water electrolyzers and fuel cells

The key components, working management, and operating techniques of anion-exchange membrane water electrolyzers and fuel cells are reviewed for the first time.