Enhanced nanofluidic transport in activated carbon nanoconduits

The surface force balance: direct measurement of interactions in fluids and soft matter

Over the last half-century, direct measurements of surface forces have been instrumental in the exploration of a multitude of phenomena in liquid, soft, and biological matter. Measurements of van der Waals interactions, electrostatic interactions, hydrophobic interactions, structural forces, depletion forces, and many other effects have checked and challenged theoretical predictions and motivated new models and understanding. The gold-standard instrument for these measurements is thesurface force balance(SFB), orsurface forces apparatus, where interferometry is used to detect the interaction force and distance between two atomically smooth planes, with 0.1 nm resolution, over separations from about 1 µm down to contact. The measured interaction forcevs.distance gives access to the free energy of interaction across the fluid film; a fundamental quantity whose general form and subtle features reveal the underlying molecular and surface interactions and their variation. Motivated by new challenges in emerging fields of research, such as energy storage, biomaterials, non-equilibrium and driven systems, innovations to the apparatus are now clearing the way for new discoveries. It is now possible to measure interaction forces (and free energies) with control of electric field, surface potential, surface chemistry; to measure time-dependent effects; and to determine structurein situ. Here, we provide an overview the operating principles and capabilities of the SFB with particular focus on the recent developments and future possibilities of this remarkable technique.

Nanofluidic logic with mechano-ionic memristive switches

Neuromorphic systems are typically based on nanoscale electronic devices, but nature relies on ions for energy-efficient information processing. Nanofluidic memristive devices could thus potentially be used to construct electrolytic computers that mimic the brain down to its basic principles of operation. Here we report a nanofluidic device that is designed for circuit-scale in-memory processing. The device, which is fabricated using a scalable process, combines single-digit nanometric confinement and large entrance asymmetry and operates on the second timescale with a conductance ratio in the range of 9 to 60. In operando optical microscopy shows that the memory capabilities are due to the reversible formation of liquid blisters that modulate the conductance of the device. We use these mechano-ionic memristive switches to assemble logic circuits composed of two interactive devices and an ohmic resistor.

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

Modulation of transport at the interface in the microporous layer for high power density proton exchange membrane fuel cells

The proton exchange membrane (PEM) fuel cell is a device that demonstrates a significant potential for environmental sustainability, since it efficiently converts chemical energy into electrical energy. The microporous layer (MPL) in PEM fuel cells promotes gas transport and eliminates water. Nevertheless, the power density of PEM fuel cells is restricted by ohmic losses and mass transport losses in conventional MPLs. In this study, we enhanced the power density of proton exchange membrane (PEM) fuel cells through the identification of appropriate materials and the mitigation of mass transport losses occurring at the interface between the microporous layer and the catalyst layer. The incorporation of high electron conductivity, slip behavior at the interface between graphene and water, and rapid water evaporation facilitated by nanoporous graphene effectively address transport-related challenges. We evaluated two types of graphene as potential substitutes for carbon black in the microporous layer (MPL). The enhanced power density (up to 1.1 W cm-2) under all humidity conditions and reduced mass transport resistance (a 75 % reduction compared to carbon black MPL) make them promising candidates for next-generation PEM fuel cells. Furthermore, these findings provide guidance for controlling interfacial mass transport in colloidal systems.

Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation

Zero-dimensional pores spanning only a few angstroms in size in two-dimensional materials such as graphene are some of the most promising systems for designing ion-ion selective membranes. However, the key challenge in the field is that so far a crack-free macroscopic graphene membrane for ion-ion separation has not been realized. Further, methods to tune the pores in the Å-regime to achieve a large ion-ion selectivity from the graphene pore have not been realized. Herein, we report an Å-scale pore size tuning tool for single layer graphene, which incorporates a high density of ion-ion selective pores between 3.5 and 8.5 Å while minimizing the nonselective pores above 10 Å. These pores impose a strong confinement for ions, which results in extremely high selectivity from centimeter-scale porous graphene between monovalent and bivalent ions and near complete blockage of ions with the hydration diameter, DH, greater than 9.0 Å. The ion diffusion study reveals the presence of an energy barrier corresponding to partial dehydration of ions with the barrier increasing with DH. We observe a reversal of K+/Li+ selectivity at elevated temperature and attribute this to the relative size of the dehydrated ions. These results underscore the promise of porous two-dimensional materials for solute-solute separation when Å-scale pores can be incorporated in a precise manner.

Energy harvesting from water streaming at charged surface

Water flowing at a charged surface may produce electricity, known as streaming current/potentials, which may be traced back to the 19th century. However, due to the low gained power and efficiencies, the energy conversion from streaming current was far from usable. The emergence of micro/nanofluidic technology and nanomaterials significantly increases the power (density) and energy conversion efficiency. In this review, we conclude the fundamentals and recent progress in electrical double layers at the charged surface. We estimate the generated power by hydrodynamic energy dissipation in multi-scaling flows considering the viscous systems with slipping boundary and inertia systems. Then, we review the coupling of volume flow and current flow by the Onsager relation, as well as the figure of merits and efficiency. We summarize the state-of-the-art of electrokinetic energy conversions, including critical performance metrics such as efficiencies, power densities, and generated voltages in various systems. We discuss the advantages and possible constraints by the figure of merits, including single-phase flow and flying droplets.

Enhanced Electrostatic Safety and Thermal Compatibility of Special Powders Based on Surface Modification

Electrostatic accumulation is associated with almost all powder-conveying processes which could bring about electrostatic discharges. In most cases of industrial accidents, electrostatic discharge is proven to be the primary source of ignition and explosion. Herein, a surface modification process of polyaniline (PANI) is proposed to construct highly exothermic special powders, namely, HMX@PANI energetic composites, with low charge accumulation for improving powder electrostatic safety. Pure HMX are encapsulated within the PANI-conductive polymer layer through simple hydrogen bonding. Simulation results demonstrate that the forming process of HMX/aniline structure is a spontaneously thermodynamical process. The resultant inclusion complex exhibits excellent thermal stability, remarkable compatibility and intensive heat release. Importantly, PANI possesses superior electrostatic mobility characteristics because of the π-conjugated ligand, which can significantly reduce the accumulated charges on the surface of energetic powders. Moreover, the modified explosive has a narrower energy gap, which will improve the electron transition by reducing the energy barrier. The electrostatic accumulation test demonstrates that HMX@PANI composites possess a trace electrostatic accumulation of 34 nC/kg, which is two orders of magnitude lower than that of pure HMX (-6600 nC/kg) and might indicate a higher electrostatic safety. In conclusion, this surface modification process shows great promise for potential applications and could be extensively used in the establishment of high electrostatic safety for special powders.

Artificial Sodium Channels for Enhanced Osmotic Energy Harvesting

Inspired by the ion channels of electric eels, we can use biomimetic nanofluidic materials to harvest the osmotic power released by mixing seawater and river water. While biological ion channels have both cation/anion and inter-cation selectivity, previous nanofluidic materials neglected the latter. As a result, NaCl solutions were generally used to simulate river water, ignoring the fact that the dominating cation in river water is typically Ca2+. In this work, we show that the different ionic compositions of seawater and river water can be exploited to improve osmotic power density by employing biomimetic sodium selective materials. Inspired by a range of properties of biological sodium channels, we constructed artificial sodium channels with zeolitic imidazolate framework-65 crystals, which selectively transport Na+ but almost completely block Ca2+. Resultantly, the effective concentration gradient of seawater/river water is dramatically increased by preventing the major cations in the river water from participating in the ion diffusion. As a result, the osmotic power density can be increased by more than 1 order of magnitude. These results should open new avenues to develop high-performance osmotic generators and may advance other applications based on biomimetic ion channels such as neuromorphic information processing.

Superfluidity Meets the Solid State: Frictionless Mass Transport through a (5,5) Carbon Nanotube

Superfluidity is a well-characterized quantum phenomenon which entails frictionless motion of mesoscopic particles through a superfluid, such as ^{4}He or dilute atomic gases at very low temperatures. As shown by Landau, the incompatibility between energy and momentum conservation, which ultimately stems from the spectrum of the elementary excitations of the superfluid, forbids quantum scattering between the superfluid and the moving mesoscopic particle, below a critical speed threshold. Here, we predict that frictionless motion can also occur in the absence of a standard superfluid, i.e., when a He atom travels through a narrow (5,5) carbon nanotube (CNT). Because of the quasilinear dispersion of the plasmon and phonon modes that could interact with He, the (5,5) CNT embodies a solid-state analog of the superfluid, thereby enabling straightforward transfer of Landau's criterion of superfluidity. As a result, Landau's equations acquire broader generality and may be applicable to other nanoscale friction phenomena, whose description has been so far purely classical.

Surface diffusion enhanced ion transport through two-dimensional nanochannels

Fast ion permeation in nanofluidic channels has been intensively investigated in the past few decades because of their potential uses in separation technologies and osmotic energy harvesting. Mechanisms governing ion transport at this ultimately small spatial regime remain to be understood, which can only be achieved in nanochannels that are controllably fabricated. Here, we report the fabrication of two-dimensional nanochannels with their top and bottom walls consisting of atomically flat graphite and mica crystals, respectively. The distinct wall structures and properties enable us to investigate interactions between ions and interior surfaces. We find an enhanced ion transport within the channels that is orders of magnitude faster than that in the bulk solutions. The result is attributed to the highly dense packing of adsorbed cations at mica surfaces, where they diffuse in-plane. Our work provides insights into surface effects on ion transport at the nanoscale.

Disentangling 1/f noise from confined ion dynamics

Ion transport through biological and solid-state nanochannels is known to be a highly noisy process. The power spectrum of current fluctuations is empirically known to scale like the inverse of frequency, following the long-standing yet poorly understood Hooge's law. Here, we report measurements of current fluctuations across nanometer-scale two-dimensional channels with different surface properties. The structure of fluctuations is found to depend on the channel's material. While in pristine channels current fluctuations scale like 1/f1+a with a = 0-0.5, the noise power spectrum of activated graphite channels displays different regimes depending on frequency. Based on these observations, we develop a theoretical formalism directly linking ion dynamics and current fluctuations. We predict that the noise power spectrum takes the form 1/f × Schannel(f), where 1/f fluctuations emerge in fluidic reservoirs on both sides of the channel and Schannel describes fluctuations inside it. Deviations to Hooge's law thus allow direct access to the ion transport dynamics of the channel - explaining the entire phenomenology observed in experiments on 2D nanochannels. Our results demonstrate how current fluctuations can be used to characterize nanoscale ion dynamics.

Extreme Ion-Transport Inorganic 2D Membranes for Nanofluidic Applications

Inorganic 2D materials offer a new approach to controlling mass diffusion at the nanoscale. Controlling ion transport in nanofluidics is key to energy conversion, energy storage, water purification, and numerous other applications wherein persistent challenges for efficient separation must be addressed. The recent development of 2D membranes in the emerging field of energy harvesting, water desalination, and proton/Li-ion production in the context of green energy and environmental technology is herein discussed. The fundamental mechanisms, 2D membrane fabrication, and challenges toward practical applications are highlighted. Finally, the fundamental issues of thermodynamics and kinetics are outlined along with potential membrane designs that must be resolved to bridge the gap between lab-scale experiments and production levels.

Complex coupling between surface charge and thermo-osmotic phenomena

Thermo-osmotic flows, generated at liquid-solid interfaces by thermal gradients, can be used to produce electric currents from waste heat on charged surfaces. The two key parameters controlling the thermo-osmotic current are the surface charge and the interfacial enthalpy excess due to liquid-solid interactions. While it has been shown that the contribution from water to the enthalpy excess can be crucial, how this contribution is affected by surface charge remained to be understood. Here, we start by discussing how thermo-osmotic flows and induced electric currents are related to the interfacial enthalpy excess. We then use molecular dynamics simulations to investigate the impact of surface charge on the interfacial enthalpy excess, for different distributions of the surface charge, and two different wetting conditions. We observe that surface charge has a strong impact on enthalpy excess, and that the dependence of enthalpy excess on surface charge depends largely on its spatial distribution. In contrast, wetting has a very small impact on the charge-enthalpy coupling. We rationalize the results with simple analytical models, and explore their consequences for thermo-osmotic phenomena. Overall, this work provides guidelines to search for systems providing optimal waste heat recovery performance.

Anomalous Mechanical and Electrical Interplay in a Covalent Organic Framework Monolayer Membrane

Ion transport through nanoconfinement, driven by both electrical and mechanical forces, has drawn ever-increasing attention, due to its high similarity to stress-sensitive ion channels in biological systems. Previous studies have reported only pressure-induced enhancement in ion conductance in low-permeable systems such as nanotubes, nanoslits, or single nanopores. This enhancement is generally explained by the ion accumulation caused by the capacitive effect in low-permeable systems. Here, we fabricate a highly permeable COF monolayer membrane to investigate ion transport behavior driven by both electrical and mechanical forces. Our results show an anomalous conductance reduction activated by external mechanical force, which is contrary to the capacitive effect-dominated conductance enhancement observed in low-permeable nanopores or channels. Through simulations, we uncovered a distinct electrical-mechanical interplay mechanism that depends on the relative rate between the ion diffusion from the boundary layer to the membrane surface and the ion transport through the membrane. The high pore density of the COF monolayer membrane reduces the charge accumulation caused by the capacitive effect, resulting in fewer accumulated ions near the membrane surface. Additionally, the high membrane permeability greatly accelerates the dissipation of the accumulated ions under mechanical pressure, weakening the effect of the capacitive layer on the streaming current. As a result, the ions accumulated on the electrodes, rather than in the capacitive layer, dominating the streaming current and giving rise to a distinct electrical-mechanical interplay mechanism compared to that in low-permeable nanopores or channels. Our study provides new insights into the interplay between electrical and mechanical forces in ultra-permeable systems.

Enhanced osmotic transport in individual double-walled carbon nanotube

The transport of fluid and ions across nanotubes or nanochannels has attracted great attention due to the ultrahigh energy power density and slip length, with applications in water purification, desalination, energy conversion and even ion-based neuromorphic computing. Investigation on individual nanotube or nanochannel is essential in revealing the fundamental mechanism as well as demonstrating the property unambiguously. Surprisingly, while carbon nanotube is the pioneering and one of the most attractive systems for nanofluidics, study on its response and performance under osmotic forcing is lacking. Here, we measure the osmotic energy conversion for individual double-walled carbon nanotube with an inner radius of 2.3 nm. By fabricating a nanofluidic device using photolithography, we find a giant power density (up to 22.5 kW/m²) for the transport of KCl, NaCl, and LiCl solutions across the tube. Further experiments show that such an extraordinary performance originates from the ultrahigh slip lengths (up to a few micrometers). Our results suggest that carbon nanotube is a good candidate for not only ultrafast transport, but also osmotic power harvesting under salinity gradients.

Fluorinated Covalent Organic Framework-Based Nanofluidic Interface for Robust Lithium-Sulfur Batteries

To realize the practical application of lithium-sulfur (Li-S) batteries, there is a need to inhibit uncontrolled Li deposition by facilitating Li-ion migration, and suppress the irreversible consumption of cathodes by preventing polysulfide shuttling. However, a permselective artifical membrane or interlayer which features fast ion transport but low polysulfide crossover is elusive. Here, we report the design and synthesis of a fluorinated covalent organic framework (4F-COF)-based membrane with a high permselectivity and increased battery lifespan. Combining density functional theory calculation, molecular dynamic simulation, and in situ Raman analysis, we demonstrate that fluorinated COF eliminates polysulfides shutting and dendritic lithium formation. Consequently, Li symmetrical cells demonstrate Li plating/stripping behaviors for 2000 h under 1 mA cm^-2. More importantly, Li-S batteries based on the 4F-COF/PP separator achieve cycling retention of 82.3% over 1000 cycles at 2 C, rate performance of 568.0 mA h g^-1 at 10 C, and an areal capacity of 7.60 mA h cm^-2 with a high sulfur loading (∼9 mg cm^-2). This work demonstrates that functionalizing nanochannels in COFs can impart permselectivity for energy storage applications.

Long-term memory and synapse-like dynamics in two-dimensional nanofluidic channels

Fine-tuned ion transport across nanoscale pores is key to many biological processes, including neurotransmission. Recent advances have enabled the confinement of water and ions to two dimensions, unveiling transport properties inaccessible at larger scales and triggering hopes of reproducing the ionic machinery of biological systems. Here we report experiments demonstrating the emergence of memory in the transport of aqueous electrolytes across (sub)nanoscale channels. We unveil two types of nanofluidic memristors depending on channel material and confinement, with memory ranging from minutes to hours. We explain how large time scales could emerge from interfacial processes such as ionic self-assembly or surface adsorption. Such behavior allowed us to implement Hebbian learning with nanofluidic systems. This result lays the foundation for biomimetic computations on aqueous electrolytic chips.

Carbon Nanotubes-Based Nanofluidic Devices: Fabrication, Property and Application

With the rapid development of nanofluidics, more and more unexpected behaviors and bizarre properties have been discovered, which brings more possibility to solve the water and energy problem. Carbon nanotubes (CNTs) with nanoscale diameter and ultrasmooth hydrophobic surface provide strong confinement and unusual water-carbon couple which lead to many exotic properties, such as flow enhancement, strong ion exclusion, ultrafast proton transport and phase transition. This article reviews the recent progresses of CNT-based nanofluidic devices in fabrication, property, and applications. Moreover, challenges and opportunities of the CNT-based nanofluidic devices are discussed.

Well-Defined Nanostructures by Block Copolymers and Mass Transport Applications in Energy Conversion

With the speedy progress in the research of nanomaterials, self-assembly technology has captured the high-profile interest of researchers because of its simplicity and ease of spontaneous formation of a stable ordered aggregation system. The self-assembly of block copolymers can be precisely regulated at the nanoscale to overcome the physical limits of conventional processing techniques. This bottom-up assembly strategy is simple, easy to control, and associated with high density and high order, which is of great significance for mass transportation through membrane materials. In this review, to investigate the regulation of block copolymer self-assembly structures, we systematically explored the factors that affect the self-assembly nanostructure. After discussing the formation of nanostructures of diverse block copolymers, this review highlights block copolymer-based mass transport membranes, which play the role of “energy enhancers” in concentration cells, fuel cells, and rechargeable batteries. We firmly believe that the introduction of block copolymers can facilitate the novel energy conversion to an entirely new plateau, and the research can inform a new generation of block copolymers for more promotion and improvement in new energy applications.