Minimally invasive treatment of both-column acetabular fractures through the Stoppa combined with iliac fossa approach

Characteristic analysis and surgical exploration for acetabular roof fractures: Multicenter retrospective cohort study

BACKGROUND

Acetabular roof was a crucial structure for maintaining the stability of hip joint; however, its important role was not especially emphasized in the Letournel-Judet classification system. Acetabular roof was segmented into the roof column and roof wall in Three-column classification and fracture in this area alone was defined as A3 injury. The purpose of this study was to explore the characteristics and surgical strategy of A3 injury.

METHODS

Patients with roof column/wall fractures received surgical management from January 2015 to 2019 January at nine level-1 trauma centers were retrospectively analyzed. Fracture data, surgical incision, operation time, blood loss, fracture healing and relevant complications were recorded to explore fracture characteristics and appropriate surgical strategy. Reduction quality was assessed based on postoperative radiographic examination. Merle d'Aubigné score was used to assess the functional outcome during the follow-up.

RESULTS

A total of 60 patients met the inclusion criteria in this study. Mean operation time was 112.83±21.77 min, and mean intraoperative blood loss was 396.67±182.00 ml. Satisfactory reduction quality was obtained in 49 cases (81.67%). All fractures healed well at an average mean of 3.07 months. Satisfactory outcomes were obtained in 46 cases (76.67%), and mean Merle d'Aubigné score was 15.53±1.33 points at the final follow-up. Reduction quality and functional outcome showed no statistical difference in three subtypes (P<0.05). Reduction quality and functional outcome presented positive correlation in three subtype fractures (P<0.05). The complication rate was 11.67% (7/60) in this study.

CONCLUSION

The injury mechanism of A3 injury was the direct impaction from femoral head on acetabular roof. Reduction and fixation of A3 injury were technique demanding, and poor prognosis may be accompanied even treated by experienced surgeons. Appropriate surgical strategies (Table 5) based on fracture characteristics in three subtypes of A3 injury were the premise of accepted prognosis.

Outcomes of acetabular fractures

Acetabular fractures are prognostic relevant fractures in terms of function and daily activities. Open reduction and internal fixation (ORIF) is still the gold-standard in treating these injuries. Over recent years, several reports are dealing with outcome evaluations but have the main disadvantage of combining several fracture types., Thus, it remains unclear to discuss a fracture-based prognosis. This analysis evaluated fracture-type specific results in terms of clinical and radiological outcome. Analyzing elementary fracture types, pure transverse and isolated posterior column fractures are associated with relevant functional impairments. Except for posterior column fractures all other elementary fracture types were associated with degenerative changes in nearly 20%. Anterior column fractures seems to be "forgiving fractures" as they are associated with the longest median time until hip joint failure occurs. In associated fracture-types T-shaped fractures are still demanding fractures with < 60% anatomic reductions and a high rate of functional impairments. All associated fracture types are associated with a relevant rate of secondary degeneration of the hip joint between 20 and 40% of patients. Early hip joint failure (THR, Femoral head necrosis, severe heterotopic ossification) within the 1st year is frequently seen in associated posterior column and posterior wall fractures, but with a relative good prognosis, if the joint survived the first year after ORIF. The highest survival rates of the hip joint is observed with ABC-fractures. Also, these fractures seem to be "forgiving fractures".

Extra-articular screw placement strategy in Stoppa approach based on three-dimensional reconstruction model

The study aimed to explore an extra-articular screw placement strategy in Stoppa approach. Radiographic data of patients who underwent pelvic computed tomography from January 2016 to June 2017 were imported into Materiaise's interactive medical image control system software for three-dimensional reconstruction. Superior and lower margins of acetabulum and ipsilateral pelvic brim could be observed simultaneously through inlet-obturator view. A horizontal line from superior acetabular margin intersected pelvic brim at point "A" and another vertical line from lower margin intersected pelvic brim at point "B" were drawn, respectively. Lengths form sacroiliac joint to "A" (a), "A" to "B" (b), and "B" to pubic symphysis (c) were measured. Patients were divided into four groups depending on gender and side difference of measured hemi-pelvis: male left, male right, female left, and female right. Lengths of adjacent holes (d) and spanning different holes (e) of different plates were also measured. Mean lengths of a, b, c in four groups were 40.94 ± 1.85 mm, 40.09 ± 1.93 mm, 41.78 ± 3.62 mm, and 39.77 ± 2.23 mm (P = 0.078); 40.65 ± 1.58 mm, 41.48 ± 1.64 mm, 40.40 ± 1.96 mm, and 40.66 ± 1.70 mm (P = 0.265); 57.03 ± 3.41 mm, 57.51 ± 3.71 mm, 57.84 ± 4.40 mm, and 59.84 ± 4.35 mm (P = 0.165), respectively. Mean d length of different plates was 12.23 mm. Average lengths spanning 1, 2, 3 and 4 holes were 19.33 mm, 31.58 mm, 43.80 mm, and 55.93 mm. Our data showed that zones a and c could be safely inserted three and four screws. Penetration into hip joint could be avoided when vacant 3-hole drilling was conducted in zone b. Fracture line in zone b could serve as a landmark for screw placement.

Treatment of Anterior Dislocation of the Sacroiliac Joint via the Lateral-rectus Approach: Surgical Techniques and Preliminary Outcomes

OBJECTIVE

Anterior dislocation of the sacroiliac joint (ADSIJ) is caused by strong violence, and because of its low morbidity, there are no standardized diagnostic and therapeutical guidelines at this moment. This study aims to explore the surgical techniques and preliminary outcomes of the lateral-rectus approach (LRA) for treating ADSIJ.

METHODS

A retrospective study was conducted of 15 patients with ADSIJ from January 2016 to January 2021. The patients' age ranged from 1.8 years old to 57 years old (37 ± 18 years old). All patients underwent open reduction and internal fixation (ORIF) through the LRA. Eight patients were combined with lumbosacral plexus injury and underwent neurolysis during operation. Patients' fracture type, mechanism of injury, associated injuries, operation time and intraoperative bleeding volume were accessed by reviewing medical history. Quality of fracture reduction was evaluated with the Matta score. At 1-year follow-up, the functional rehabilitation was evaluated by the Majeed rehabilitation criteria. For those with lumbosacral plexus injury, the neuromotor function was evaluated using muscle strength grading proposed by the British Medical Research Council (BMRC) and recovery was recorded.

RESULTS

All 15 patients underwent the operation successfully. The surgical time ranged from 70 to 220 min (126 ± 42 min), and the intraoperative blood loss ranged from 180 to 2000 mL (816 ± 560 mL). Eighty percent of the cohort (12/15) were rated as excellent and good in the Matta score for fracture reduction quality after operation without surgical incision-related complications. At 1-year follow-up, the overall excellent and good rate was 73.3% (11/15) according to the Majeed criteria, the neuromotor function recovered completely in six cases and partially in two cases according to the BMRC muscle strength grading, and the recovery of sensory function was evaluated as excellent in six cases, good in one case and poor in one case, with an overall excellent and good rate of 87.5%.

CONCLUSION

The LRA can well expose the surrounding structures of the sacroiliac joint from the front, which helps surgeons reduce and fix the anterior dislocation of the sacroiliac joint under direct vision and effectively decompress the entrapment of the lumbosacral plexus to achieve better clinical efficacy.

Treatment of acetabular fracture involving anterior and posterior columns using a single pararectus approach: surgical experience and preliminary results

PURPOSE

This study aims to evaluate the efficacy of single pararectus approach in patients confirmed with acetabular fracture involving anterior and posterior columns.

METHODS

A total of 58 patients confirmed with acetabular fracture involving anterior and posterior columns and treated at our hospital between January 2015 and January 2020 were retrospectively analyzed. A single pararectus approach was applied for all patients. Routine X-rays were performed at follow-up of one, three, six, 12, and 18 months, and three-dimensional CT scans were added at six and 18 months. Fracture reduction quality was assessed using the Matta score system, and functional assessment used the Modified Merle D'Aubigné and Postel score system. Post-operative complications, including fat liquefaction and deep vein thrombosis, were recorded and analyzed.

RESULTS

The median operation time was 186 min while the intra-operative blood loss was 421 mL. The rate of good-to-excellent reduction was 94.8%, and the rate of good-to-excellent hip function score reached 93.1%. Seven patients presented with post-operative complications, including three intra-operative small vascular injuries, two peritoneal small perforations, one fat liquefaction, and one deep vein thrombosis.

CONCLUSION

Using a single pararectus approach is convenient and effective for treating acetabular fracture involving anterior and posterior columns, especially those involving the quadrilateral area.

TRIAL REGISTRATION

ChiCTR, ChiCTR2100054604. Registered 21 December 2022. Retrospectively registered, http://www.chictr.org.cn/showproj.aspx?proj=144783 .

Displacement Pattern of Anterior and Posterior Column Fragments in Both-Column Acetabular Fractures: A 3D Reconstruction-Based Study

BACKGROUND

Few studies have been conducted to examine the displacement characteristics of both-column acetabular fractures (BCAFs). The goal of this study was to investigate the displacement pattern of anterior column (AC) and posterior column (PC) fragments in BCAFs using 3D virtual software.

MATERIALS AND METHODS

BCAFs were retrospectively reviewed, and 81 patients were enrolled. Computed tomography (CT) images were imported into Mimics software. A 3D model of each pelvis was generated. Four marked points and the rotation angle of each of the injured ACs and PCs were identified. The fracture fragments were reduced virtually using the software, and the change in coordinates of the marked points after reduction was recorded while the rotation angle was measured. The measurements of positional and directional displacement were analysed using the Mann-Whitney U test and the binomial test, respectively.

RESULTS

There was a propensity for AC fragments to shift superomedially and to rotate externally (p < 0.001). Additionally, the posteroinferior fracture area of AC fragments showed the greatest displacement (p < 0.05). PC fragments moved superomedially (p < 0.001) and moved more at the proximal end than the distal end (p < 0.001). PC displacement was always accompanied by internal rotation (p < 0.001). Greater AC displacement was observed in the fracture area further away from the acetabulum (p < 0.05). Greater rotation was observed for the AC than the PC (p < 0.001).

CONCLUSION

After a BCAF occurs, there are regular patterns regarding the direction and distance of AC and PC fragment displacement. Information on these patterns may provide insight into the injury mechanism and fracture morphology and facilitate surgical decision-making for orthopaedic trauma surgeons.

Is Plating Fixation Through the Kocher-Langenbeck Approach for Associated Posterior Wall Fragment Indispensable in Both-Column Acetabular Fractures?

OBJECTIVE

The treatment methods for posterior wall (PW) in both-column acetabular fractures are controversial. The purpose of this study was to compare reduction quality, clinical outcomes, and complications of nonfixation for posterior wall fragment and plating via the Kocher-Langenbeck (KL) approach after anterior surgical procedures in both-column acetabular fractures.

METHODS

Forty-nine patients with both-column acetabular fractures associated with PW fixed via iliac fossa and Stoppa approaches from October 2012 to October 2017 were recruited into this study and were divided into two groups: Nonfix group (nonfixation for PW) and KL group (PW plating through the KL approach). Operation duration, intraoperative blood loss, reduction quality, fracture healing, and relevant complications of patients were reviewed. Merle d'Aubigné scores were used for assessing functional outcome.

RESULTS

The mean blood loss and operation durations were lower in Nonfix group than in KL group (both p < 0.05). The mean hospital stay durations were (18.54 ± 6.42) days and (21.17 ± 7.32) days in groups Nonfix and KL, respectively (p = 0.186). All fractures healed well with no significant difference in union time between the two groups (p = 0.210). The rates of satisfactory reduction were 84.62% (22/26) in Nonfix group and 86.96% (20/23) in KL group (p = 1.000). The mean Merle d'Aubigné scores were 15.62 ± 2.28 in Nonfix group and 16.17 ± 2.19 in KL group (p = 0.388). The complication rates were 7.69% (2/26) in Nonfix group and 34.78% (8/23) in KL group (p = 0.046).

CONCLUSIONS

For both-column acetabular fractures associated with PW fragment, although fixation of PW was not performed after anterior surgical procedures, satisfactory outcomes could also be obtained. However, nonfixation was a less invasive choice with a lower complication rate.

A Single Approach for Management of Fractures Involving Both Columns of the Acetabulum: A Case Series of 23 Patients

Aim and objective

To study the radiological and functional outcomes as well as complications in the management of fractures involving both columns of the acetabulum using a single surgical approach.

Design

Type IV, prospective clinical study.

Setting

Level I trauma centre.

Materials and methods

Inclusion criteria were as follows: (a) patients over 20 year of age and (b) patients suffering from acetabular fractures involving both columns as per Letournel and Judet classification, namely transverse, transverse + posterior wall, T type, anterior column posterior hemi-transverse (ACPHT) and associated both columns. Exclusion criteria were as follows: (a) patient suffering from isolated anterior column, posterior column, anterior wall, posterior wall and posterior wall + column fractures; (b) patient who have undergone surgical procedures of the hip prior to trauma; and (c) compound acetabular fractures. A total of 23 patients having both column acetabulum fractures were included prospectively from June 2016 to December 2018 and followed up till 1 year postoperatively. Open reduction and internal fixation were performed through one of three described approaches, i.e., iliofemoral, Kocher-Langenbeck, and anterior intrapelvic or ilioinguinal.

Results

Our study population consisted of 30.4% transverse, 39.1% associated both columns, 21.7% T type and 8.7% anterior column + posterior hemi-transverse. Of these, 65.2% were operated using the Kocher-Langenbeck approach, while 30.4% of patients required the anterior intrapelvic approach. The remaining 4.3% of patients were operated by the iliofemoral approach. Anatomic reduction was achieved in 100% of our study population with remaining displacement less than or equal to 1°mm. At 1-year follow-up, all fractures showed a satisfactory union with an excellent Matta index in 100% study subjects. Complications at 1 year included one case of foot drop, which was present preoperatively but failed to improve and one case of post-traumatic arthritis. Average Harris Hip score (HHS) and mean Merle D'Aubigne (MDA) scores suggested good clinical outcomes in the study population.

Conclusions

A single approach can be used to achieve good functional and radiological outcomes in carefully selected bicolumnar fractures of the acetabulum, with less approach-related morbidity.

Clinical significance

Traditionally, multiple approaches are used for acetabulum fractures involving both columns, but with proper patient selection, single approach can be used with good functional and surgical outcomes.

How to cite this article

Patil A, Attarde DS, Haphiz A, et al. A Single Approach for Management of Fractures Involving Both Columns of the Acetabulum: A Case Series of 23 Patients. Strategies Trauma Limb Reconstr 2021;16(3):152–160.

The Stoppa combined with iliac fossa approach for the treatment of both-column acetabular fractures

Background

At present, the choice of surgical approach for both-column fractures is still controversial. The purpose of this study was to explore the efficacy of the Stoppa combined with iliac fossa (S+IF) approach in the treatment of both-column fractures.

Methods

In this retrospective case series, 76 patients were included in the study from 2014 to 2018. They were divided into two groups according to the surgical approaches. The differences of intraoperative blood loss, operative time, quality of reduction, clinical outcome, and perioperative complications were compared between the two groups.

Results

All patients had undergone the IL approach or the S+IF approach. The average operative time was 156.2 min (110~210 min) in group I and 126.5 min (80~180 min) in group II (P < 0.001). The average blood loss in group I was 784.1 ml, while the average blood loss in group II was 625.3 ml (P = 0.007). According to Matta’s criteria, 28 cases obtained anatomic reduction and 12 cases got imperfect reduction in group I; 21 cases obtained anatomic reduction and 7 cases got imperfect reduction in group II (P > 0.05). The clinical outcome (excellent to good) was 66% in group I versus 69% in group II (P > 0.05). The complication rates were 18.2% in group I and 12.5% in group II (P > 0.05).

Conclusions

As a minimally invasive surgical approach, the S+IF approach is a valuable alternative to the IL approach for the treatment of both-column acetabular fractures if these two anterior approaches can achieve fracture exposure, reduction, and fixation.

Clinico-Radiological Evaluation of Modified Stoppa Approach in Treatment of Acetabulum Fractures

Background

The aim of our study was to evaluate the efficacy of Modified Stoppa approach for surgical treatment of acetabulum fractures by analyzing clinical and radiological outcomes. Also, we assess intraoperative and postoperative complications of fracture treated by using Modified Stoppa approach.

Objectives

To evaluate clinical outcomes of Modified Stoppa approach by using Merle d'Aubigne hip score. To evaluate the radiological reduction quality of Modified Stoppa approach by using the criteria of Matta, and to assess complications of Modified Stoppa approach. 

Method

Thirty-two patients participated in this study (mean age 40 years; range 18-60 years) and the male to female ratio was 4:1, patients who underwent surgical intervention for acetabular fracture by using Modified Stoppa approach from Oct 2017 to April 2019 were included. Out of 32 patients, two were lost in follow up, leaving 30 of 32 patients for clinico-radiological analysis. We classified the fracture pattern according to Judet and Letournel classification based on preoperative X-ray AP view, Judet View, and 3D-CT pelvis. Operative time, blood loss, reduction quality, and perioperative complications were assessed in each patient. Clinical outcomes were assessed by Merle d’Aubigne hip score and radiological outcomes by criteria of Matta. 

Results

Out of 30 acetabulum fractures in 30 patients, three (10%) were categorized as anterior column fracture, one (3.3%) as transverse with posterior wall, one (3.33%) as T-type, six (20%) as anterior column with posterior hemi-transverse and 19 (63.33%) as both column fractures. In our study, most patients have trauma due to road traffic accident (RTA) in 25 (83.3%) and fall from stairs in three (10%) patients. Timing of surgery after trauma was average 5.83 days (range three to 15 days), Mean surgical time determined to be 214.66 min (range 150-350 min) and mean intraoperative loss 683.33 ml (range 230-1250 ml). Clinical outcomes by Merle d’Aubigne hip score was excellent in 13 (43.33%), good in 15 (50%), fair in two (6.66%) patients whereas poor results in 0 (0%) patient (p=0.001). Quality of reduction by Matta criteria was found to be an anatomical reduction in 26 (86.6%), imperfect reduction in three (10%), and poor reduction in one patient (3.33%) (p<0.001). Radiological grading by Matta criteria was excellent in 24 (80%), good in five (16.66%), and fair in one (3.33%) patient, and no patients met criteria for poor results (p<0.001). In operative complications one patient developed an external iliac vein injury which was repaired by a vascular surgeon, one patient had a superficial infection for which debridement, regular dressing, and IV antibiotics given and resolve in one month, obturator nerve injury in one patient which was resolve in five to six months, lateral femoral cutaneous nerve injury in one patient which resolved within three months and one patient urinary bladder injury which was repaired by a general surgeon. 

Conclusion

Our experience with Modified Stoppa approach for surgical treatment of acetabulum fracture in 30 patients is excellent and effective for better visualization to anterior column, quadrilateral plate, and up to sacroiliac joint. This approach provides better visibility of the fracture site which allows for good to an excellent reduction of fracture and fixation. Although Stoppa approach is cosmetic surgery in terms of scar size, there is less complication rate than the ilioinguinal approach. 

Porphyrin-Based Metal-Organic Framework Compounds as Promising Nanomedicines in Photodynamic Therapy

Porphyrin photosensitizers are widely used in photodynamic therapy (PDT) because of their unique diagnostic and therapeutic functions. However, many factors such as poor water solubility and instability of porphyrin compounds have limited their clinical application. Metal-organic frameworks (MOFs) have the beneficial characteristics of versatility, high porosity, and excellent biocompatibility. Porphyrin-MOF nanomaterials have attracted the attention of researchers because MOFs can effectively suppress the quenching caused by the self-aggregation of porphyrin compounds and promote drug delivery. This article reviews the latest applications of porphyrin-MOF nanomedicine in type II photodynamic therapy by increasing tumour cell oxygen concentration, depleting tumour cell functional molecules and releasing signal molecules. Current potential limitations and future applications are also emphasized and discussed herein.

Personalized Three-Dimensional Printed Anterior Titanium Plate to Treat Double-Column Acetabular Fractures: A Retrospective Case-Control Study

Objective

To compare the clinical efficacy and safety of a personalized three‐dimensional (3D) printed dynamic anterior plate–screw system for the quadrilateral area (DAPSQ) titanium plate and a traditional DAPSQ reconstruction plate in the treatment of double‐column acetabular fractures.

Methods

This was a retrospective case‐control study. From May 2014 to January 2018, 43 patients with double‐column acetabular fractures underwent open reduction and internal fixation. Among these, 20 cases were fixed with a 3D printed DAPSQ plate (3D printed group) and 23 cases were fixed with a DAPSQ reconstruction plate (control group). The 3D printed group comprised 15 men and 5 women, with an average age of 50.1 ± 8.2 years. The control group comprised 16 men and 7 women, with an average age of 51.0 ± 8.6 years. The evaluation index included the surgical data (i.e. blood loss, operating time, duration of hospital stay, and intraoperative and postoperative complications), position and length of implants, reduction quality, hip function, and related complications. The reduction quality was evaluated using the Matta scoring standard and hip function was evaluated using the modified Merle d’Aubigné score.

Results

A total of 43 patients met the inclusion criteria. The mean postoperative follow up was 35.2 months in the 3D printed group and 36.9 months in the control group. There were no significant group differences in demographic data between the two groups. The position and length of the 3D printed implants were generally in accord with preoperative planning using a 3D pelvic model. Patients in the 3D printed group had significantly shorter operation time (223.2 vs 260.5 min, P < 0.05) and less intraoperative blood loss (930.4 vs 1426.1 mL, P < 0.05) compared to the control group. Anatomic, imperfect, and poor reduction was obtained in 13, 5, and 2 cases in the 3D printed group, respectively, and was obtained in 12, 8, and 3 cases in the control group. The modified Merle d’Aubigné scores were excellent in 11 cases, good in seven cases, and fair in two cases in the 3D printed group. They were excellent in 11 cases, good in eight cases, fair in three cases, and poor in one case in the control group. The reduction quality and hip function did not differ within the groups (P > 0.05). The general complication rate in the 3D printed group and the control group was 15% and 26.1%, respectively, but the difference between the two groups was not statistically significant.

Conclusion

Use of a personalized 3D printed DAPSQ plate has potential advantages in reducing the operation time and blood loss during the treatment of double‐column acetabular fractures.

Three-Column Classification for Acetabular Fractures: Introduction and Reproducibility Assessment

BACKGROUND

The Judet-Letournel classification has been widely used to diagnose acetabular fractures since it was proposed. However, there has been growing evidence of incompleteness and comprehension difficulty in this classification, which may adversely affect its clinical use. The purposes of this study were to introduce a novel 3-column classification system for acetabular fractures and to evaluate its reliability and reproducibility.

METHODS

A total of 1,028 patients with acetabular fractures, who had undergone surgical treatment from June 2011 to January 2017 in 7 level-I trauma centers, were recruited into this study. Preoperative radiographs and computed tomographic (CT) scans were conducted for each patient. To evaluate the reproducibility of the 3-column classification system for acetabular fractures, the interobserver and intraobserver reliability (kappa coefficient, κ) of this classification system compared with those of the Judet-Letournel classification system was investigated by 4 observers.

RESULTS

A total of 209 patients (20.33%) could not be classified by the Judet-Letournel classification, and 3 cases (0.29%) could not be classified by the novel 3-column classification. The mean κ value of the interobserver reliability for the Judet-Letournel classification was 0.591 (range, 0.508 to 0.681), indicating moderate agreement, whereas the mean κ value was 0.735 (range, 0.594 to 0.930), indicating substantial agreement, when using the 3-column classification. The mean κ value for the intraobserver reliability was 0.751 (range, 0.708 to 0.793) for the Judet-Letournel classification and 0.909 (range, 0.792 to 0.957) for the 3-column classification.

CONCLUSIONS

The 3-column classification, based on the anatomic character of the acetabulum, showed higher interobserver and intraobserver reliability than the Judet-Letournel classification. Additionally, certain fracture patterns in the 3-column classification scheme generally correlated with surgical approaches. This novel classification system may be used as a supplement to the traditional Judet-Letournel classification system.

CLINICAL RELEVANCE

The 3-column concept of the acetabulum proposed in this study is helpful to master acetabular fractures for less experienced surgeons. The novel classification system could assist with acetabular fracture diagnosis and the choice of surgical approaches.

[Comparison of effectiveness between two combined anterior and posterior approaches for complicated acetabular fractures]

Objective

To compare the effectiveness between modified ilioinguinal approach combined with Kocher-Langenbeck (K-L) approach and Stoppa approach combined with K-L approach for the treatment of complicated acetabular fractures.

Methods

Between May 2011 and May 2016, Sixty-two patients with complicated acetabular fractures were treated with operation via combined anterior and posterior approaches. Thirty-four cases (group A) were treated with modified ilioinguinal approach combined with K-L approach, and 28 cases (group B) were treated with Stoppa approach combined with K-L approach. There was no significant difference in gender, age, injury causes, the type of fracture, time from injury to operation, and associated injury between 2 groups ( P>0.05). The operation time, intraoperative blood loss, and hospitalization time were recorded. X-ray film was performed to evaluate the fracture reduction according to the Matta reduction criteria and observe the fracture healing, osteoarthritis, and heterotopic ossification. Clinical results were evaluated according to the grading system of modified d'Aubigne and Postel.

Results

There was no significant difference in operation time, intraoperative blood loss, and hospitalization time between 2 groups ( P>0.05). Postoperative incision fat liquefaction occurred in 2 cases in group A and group B respectively, and deep vein thrombosis of lower extremity occurred in 1 case in group A. No iatrogenic injury was found in 2 groups. Fifty-six patients were followed up after operation. Thirty patients in group A were followed up 12-48 months (mean, 31.8 months). Twenty-six patients in group B were followed up 12-46 months (mean, 30.2 months). At 12 months after operation, according to the grading system of modified d'Aubigne and Postel, the hip function was rated as excellent in 9 cases, good in 16 cases, fair in 3 cases, and poor in 2 cases, with the excellent and good rate of 83.3% in group A; the hip function was rated as excellent in 7 cases, good in 14 cases, fair in 2 cases, and poor in 3 cases, with the excellent and good rate of 80.8% in group B. There was no significant difference in the hip function between 2 groups ( Z=0.353, P=0.724). The X-ray films showed that there were 23 cases of anatomical reduction, 6 cases of satisfactory reduction, and 1 case of unsatisfactory reduction in group A, and 20 cases, 5 cases, and 1 case in group B, respectively. There was no significant difference in the results of fracture reduction between 2 groups ( Z=0.011, P=0.991). Fracture healing was observed in both groups. There was no significant difference in fracture healing time between 2 groups ( t=0.775, P=0.106). During follow-up, 5 cases of osteoarthritis changes, 2 cases of heterotopic ossification, and 2 cases of avascular necrosis of femoral head occurred in group A, and 4 cases, 2 cases, and 1 case in group B, respectively. The difference between 2 groups was not significant ( P>0.05).

Conclusion

According to the location and type of fracture, making a choice between the modified anterior approach and Stoppa approach, and then combined with K-L approach for treatment of complicated acetabular fracture, can obtain satisfactory effectiveness.