The compositional and nano-structural basis of fracture healing in healthy and osteoporotic bone

Effect of collagen fibril orientation on the anisotropic properties of peri-implant bone

In orthopedic and dental surgery, the implantation of biomaterials within the bone to restore the integrity of the treated organ has become a standard procedure. Their long-term stability relies on the osseointegration phenomena, where bone grows onto and around metallic implants, creating a bone-implant interface. Bone is a highly hierarchical material that evolves spatially and temporally during this healing phase. A deeper understanding of its biomechanical characteristics is needed, as they are determinants for surgical success. In this context, we propose a multiscale homogenization model to evaluate the effective elastic properties of bone as a function of the distance from the implant, based on the tissue's structure and composition at lower scales. The model considers three scales: hydroxyapatite foam (nanoscale), ultrastructure (microscale), and tissue (mesoscale). The elastic properties and the volume fraction of the elementary constituents of bone matrix (mineral, collagen, and water), the orientation of the collagen fibril relative to the implant surface, and the mesoscale porosity constitute the input data of the model. The effect of a spatiotemporal variation in the collagen fibrils' orientation on the bone anisotropic properties in the proximity of the implant was investigated. The findings revealed a strong variation of the components of the effective elasticity tensor of the bone as a function of the distance from the implant. The effective elasticity appears to be primarily sensitive to the porosity (mesoscale) rather than to the collagen fibrils' orientation (sub-micro scale). However, the orientation of the fibrils has a significant influence on the isotropy of the bone. When analyzing the symmetry properties of the effective elasticity tensor, the ratio between the isotropic and hexagonal components is determined by a combination of the porosity and the fibrils' orientation. A decrease in porosity leads to a decrease in bone isotropy and, in turn, an increase in the impact of the fibrils' orientation. These results demonstrate that the collagen fibril orientation should be taken into account to properly describe the effective elastic anisotropy of bone at the organ scale.

Effect of direct oral anticoagulant dabigatran on early bone healing: An experimental study in rats

Background

Dabigatran belongs to the new generation of direct oral anticoagulants (DOACs). Its advantages are oral administration and no need for international normalized ratio (INR) monitoring. Although its use has increased, its potential side effects on bone healing and remodeling have not been fully investigated. The present study aimed to evaluate the possible effects of dabigatran on early bone healing.

Methods

Sixteen male Wistar rats were divided into two groups; in group A, 20-mg/kg dabigatran dose was administered orally daily for 15 days, while group B served as a control. Two circular bone defects (d=6 mm) were created on either side of the parietal bones. Two weeks after surgery and euthanasia of the animals, tissue samples (parietal bones that contained the defects) were harvested for histological and histomorphometric analysis. Statistical analysis was performed with a significance level of α=0.5.

Results

No statistically significant differences were found between the two groups regarding the regenerated bone (21.9% vs. 16.3%, P=0.172) or the percentage of bone bridging (63.3% vs. 53.5%, P=0.401).

Conclusion

Dabigatran did not affect bone regeneration, suggesting that it might be a safer drug compared to older anticoagulants known to lead to bone healing delay.

Multi-scale characterization of the spatio-temporal interplay between elemental composition, mineral deposition and remodelling in bone fracture healing

Bone mineralization involves a complex orchestration of physico-chemical responses from the organism. Despite extensive studies, the detailed mechanisms of mineralization remain to be elucidated. This study aims to characterize bone mineralization using an in-vivo long bone fracture healing model in the rat. The spatio-temporal distribution of relevant elements was correlated to the deposition and maturation of hydroxyapatite and the presence of matrix remodeling compounds (MMP-13). Multi-scale measurements indicated that (i) zinc is required for both the initial mineral deposition and resorption processes during mature mineral remodeling; (ii) Zinc and MMP-13 show similar spatio-temporal trends during early mineralization; (iii) Iron acts locally and in coordination with zinc during mineralization, thus indicating novel evidence of the time-events and inter-play between the elements. These findings improve the understanding of bone mineralization by explaining the link between the different constituents of this process throughout the healing time. STATEMENT OF SIGNIFICANCE: Bone mineralization involves a complex orchestration of physico-chemical responses from the organism, the detailed mechanisms of which remain to be elucidated. This study presents a highly novel multi-scale multi-modal investigation of bone mineralization using bone fracture healing as a model system. We present original characterization of tissue mineralization, where we relate the spatio-temporal distribution of important trace elements to a key matrix remodeling compound (MMP-13), the initial deposition and maturation of hydroxyapatite and further remodeling processes. This is the first time that mineralization has been probed down to the nanometric level, and where key mineralization components have been investigated to achieve a comprehensive and mechanistic understanding of the underlying mineralization processes during bone healing.

Peripheral cortical bone density predicts vertebral bone mineral properties in spine fusion surgery patients

Spine fusion surgery is one of the most common orthopedic procedures, with over 400,000 performed annually to correct deformities and pain. However, complications occur in approximately one third of cases. While many of these complications may be related to poor bone quality, it is difficult to detect bone abnormalities prior to surgery. Areal BMD (aBMD) assessed by DXA may be artifactually high in patients with spine pathology, leading to missed diagnosis of deficits. In this study, we related preoperative imaging characteristics of both central and peripheral sites to direct measurements of bone quality in vertebral biopsies. We hypothesized that pre-operative imaging outcomes would relate to vertebral bone mineralization and collagen properties. Pre-operative assessments included DXA measurements of aBMD of the spine, hip, and forearm, central quantitative computed tomography (QCT) of volumetric BMD (vBMD) at the lumbar spine, and high resolution peripheral quantitative computed tomography (HRpQCT; Xtreme CT2) measurements of vBMD and microarchitecture at the distal radius and tibia. Bone samples were collected intraoperatively from the lumbar vertebrae and analyzed using Fourier-transform Infrared (FTIR) spectroscopy. Bone samples were obtained from 23 postmenopausal women (mean age 67 ± 7 years, BMI 28 ± 8 kg/m2). We found that patients with more mature bone by FTIR, measured as lower acid phosphate content and carbonate to phosphate ratio, and greater collagen maturity and mineral maturity/crystallinity (MMC), had greater cortical vBMD at the tibia and greater aBMD at the lumbar spine and one-third radius. Our data suggests that bone quality at peripheral sites may predict bone quality at the spine. As bone quality at the spine is challenging to assess prior to surgery, there is a great need for additional screening tools. Pre-operative peripheral bone imaging may provide important insight into vertebral bone quality and may foster identification of patients with bone quality deficits.

Effects of bisphosphonates on appendicular fracture repair in rodents

The balance between osteoclastic bone resorption and osteoblastic bone formation is ultimately responsible for maintaining a structural and functional skeleton. Despite their strength, bones do break and the main cause of fractures are trauma and decreased bone mineral density as a result of aging and/or pathology that weakens the bone's microarchitecture and subsequently, its material properties. Osteoporosis is a disease marked by increased osteoclast activity and decreased osteoblastic activity tipping the remodeling balance in favor of bone resorption and can be caused by aging, glucocorticoids, disuse and estrogen-deficiency. Ultimately, this leads to brittle and weaker bones which become more prone to trauma or stress-induced fractures. The current treatment for preventing and treating osteoporotic fractures is the use of antiresorptive drugs such as bisphosphonates (BPs) and denosumab, but unfortunately, their long-term use, especially with alendronate and ibandronate, has been associated with increased risk of atypical femoral fractures (AFFs); femoral diaphyseal fractures distal to the lesser trochanter but proximal to the supracondylar flare. The purpose of this review is to examine the information that exists in the literature examining the effects of BPs on fracture repair of long bones in rodent (rat and mouse) models. The focus on rodents stems from the scientific community's unresolved need to develop small animal models to examine the molecular, cellular, tissue and biomechanical mechanisms responsible for the development of AFFs and how best they can be treated.

Diminishing effects of mechanical loading over time during rat Achilles tendon healing

Mechanical loading affects tendon healing and recovery. However, our understanding about how physical loading affects recovery of viscoelastic functions, collagen production and tissue organisation is limited. The objective of this study was to investigate how different magnitudes of loading affects biomechanical and collagen properties of healing Achilles tendons over time. Achilles tendon from female Sprague Dawley rats were cut transversely and divided into two groups; normal loading (control) and reduced loading by Botox (unloading). The rats were sacrificed at 1, 2- and 4-weeks post-injury and mechanical testing (creep test and load to failure), small angle x-ray scattering (SAXS) and histological analysis were performed. The effect of unloading was primarily seen at the early time points, with inferior mechanical and collagen properties (SAXS), and reduced histological maturation of the tissue in unloaded compared to loaded tendons. However, by 4 weeks no differences remained. SAXS and histology revealed heterogeneous tissue maturation with more mature tissue at the peripheral region compared to the center of the callus. Thus, mechanical loading advances Achilles tendon biomechanical and collagen properties earlier compared to unloaded tendons, and the spatial variation in tissue maturation and collagen organization across the callus suggests important regional (mechano-) biological activities that require more investigation.

Miniplates coated by plasma electrolytic oxidation improve bone healing of simulated femoral fractures on low bone mineral density rats

The treatment of polytrauma patients represents a great challenge in the maxillofacial and orthopedic surgery fields. Therefore, this study tested the hypothesis that the use of a bioactive coating (by plasma electrolytic oxidation, PEO) on titanium microplates could improve the fracture healing of low bone mineral density (BMD) rats. Thirty female rats underwent bilateral ovariectomy surgery (OVX), and 35 rats underwent fake surgery (SHAM). Three months later, animals were subjected to femoral fracture simulation and were fixed with either non-coated (CONV) or coated (PEO) titanium miniplates. Eight weeks postoperatively, microplate/bone complexes were analyzed through computed microtomography, histometric, confocal microscopy, molecular, and biomechanical analysis. Bioactive elements (Ca and P) were incorporated on the PEO microplate and the surface was modified in a volcano-like structure. In the microCT analysis the OVX/PEO group had greater values for Tb.Th (bone trabecular thickness), Tb.Sp (separation of bone trabeculae) and Tb.N (number of trabeculae) parameters compared to the OVX/CONV group. According to histometric analysis, the OVX/PEO group showed significantly higher new bone formation than the OVX/CONV group (P < 0.05). For the fluorochrome area, the OVX groups (PEO and CONV) showed greater values for calcein precipitation (old bone) than alizarin red (new bone). Molecular results showed greater values for proteins related to the final phase of bone formation (P < 0.05) in the OVX/PEO group. The OVX/PEO group showed higher bone/miniplate system resilience compared to the others (P < 0.05). It was concluded that PEO coating optimizes bone healing on simulated femoral fractures in low bone mineral density rats. This sheds new light in the treatment of osteoporotic patients with bone fractures.

Spatio-temporal evolution of hydroxyapatite crystal thickness at the bone-implant interface

A better understanding of bone nanostructure around the bone-implant interface is essential to improve longevity of clinical implants and decrease failure risks. This study investigates the spatio-temporal evolution of mineral crystal thickness and plate orientation in newly formed bone around the surface of a metallic implant. Standardized coin-shaped titanium implants designed with a bone chamber were inserted into rabbit tibiae for 7 and 13 weeks. Scanning measurements with micro-focused small-angle X-ray scattering (SAXS) were carried out on newly formed bone close to the implant and in control mature cortical bone. Mineral crystals were thinner close to the implant (1.8 ± 0.45 nm at 7 weeks and 2.4 ± 0.57 nm at 13 weeks) than in the control mature bone tissue (2.5 ± 0.21 nm at 7 weeks and 2.8 ± 0.35 nm at 13 weeks), with increasing thickness over healing time (+30 % in 6 weeks). These results are explained by younger bone close to the implant, which matures during osseointegration. Thinner mineral crystals parallel to the implant surface within the first 100 µm indicate that the implant affects the ultrastructure of neighbouring bone , potentially due to heterogeneous interfacial stresses, and suggest a longer maturation process of bone tissue and difficulty in binding to the metal. The bone growth kinetics within the bone chamber was derived from the spatio-temporal evolution of bone tissue's nanostructure, coupled with microtomographic imaging. The findings indicate that understanding mineral crystal thickness or plate orientation can improve our knowledge of osseointegration.

Longitudinal in vivo monitoring of callus remodeling in BMP-7- and Zoledronate-treated fractures

Pharmacological interventions that combine pro-anabolic and anti-catabolic drugs to treat recalcitrant fractures have shown remarkable efficacy in augmenting the regenerative response. Specifically, in rodent models of fracture repair, treatment with BMP-7 and Zoledronate (ZA) has almost uniformally resulted in complete union. However, delayed remodeling may be problematic for ZA-treated fractures. The increase in newly formed bone is substantial but if translated in humans, delayed remodeling may delay functional recovery. Our objective was to determine if, and to what extent, bone morphogenetic protein (BMP) (in synergistically administered BMP-7 + ZA) can modulate the delayed hard callus remodeling caused by ZA. Callus remodeling in BMP-7-only and BMP-7 + ZA-treated osteotomies were monitored using in vivo µCT to follow the progression of healing at 6-week intervals over 24 weeks in an open femoral fracture rat model. None of the groups recovered baseline cortical bone volumes within 24 weeks post-osteotomy. Treatment prolonged the remodeling phase but the kinetics of remodeling appeared to differ between BMP and BMP + ZA groups. However, the mechanical characteristics were largely restored. Callus/bone volumes in BMP-only treated fractures peaked as early as week 3 suggesting that remodeling is stimulated prematurely. However, this rate of remodeling was not maintained as BMP-7 was found to exhibit negligible changes in callus/bone volumes between weeks 6 and 18, whereas declines in callus/bone volumes were present at these time points in the BMP-7 + ZA group. Our findings suggest that inclusion of ZA as an anti-catabolic agent may not be detrimental to the regenerative process despite a prolonged remodeling phase.

Bone Damage Evolution Around Integrated Metal Screws Using X-Ray Tomography - in situ Pullout and Digital Volume Correlation

Better understanding of the local deformation of the bone network around metallic implants subjected to loading is of importance to assess the mechanical resistance of the bone-implant interface and limit implant failure. In this study, four titanium screws were osseointegrated into rat tibiae for 4 weeks and screw pullout was conducted in situ under x-ray microtomography, recording macroscopic mechanical behavior and full tomographies at multiple load steps before failure. Images were analyzed using Digital Volume Correlation (DVC) to access internal displacement and deformation fields during loading. A repeatable failure pattern was observed, where a ∼300–500 μm-thick envelope of bone detached from the trabecular structure. Fracture initiated close to the screw tip and propagated along the implant surface, at a distance of around 500 μm. Thus, the fracture pattern appeared to be influenced by the microstructure of the bone formed closely around the threads, which confirmed that the model is relevant for evaluating the effect of pharmacological treatments affecting local bone formation. Moreover, cracks at the tibial plateau were identified by DVC analysis of the tomographic images acquired during loading. Moderate strains were first distributed in the trabecular bone, which localized into higher strains regions with subsequent loading, revealing crack-formation not evident in the tomographic images. The in situ loading methodology followed by DVC is shown to be a powerful tool to study internal deformation and fracture behavior of the newly formed bone close to an implant when subjected to loading. A better understanding of the interface failure may help improve the outcome of surgical implants.

Medical Treatment for Osteoporosis: From Molecular to Clinical Opinions

Osteoporosis is a major concern all over the world. With aging, a gradual loss of bone mass results in osteopenia and osteoporosis. Heritable factors account for 60–80% of optimal bone mineralization. Modifiable factors, such as weight-bearing exercise, nutrition, body mass, and hormonal milieu, play an important role in the development of osteopenia and osteoporosis in adulthood. Currently, anti-resorptive agents, including estrogen, bisphosphonates, and selective estrogen receptor modulators (SERMs), are the drugs of choice for osteoporosis. Other treatments include parathyroid hormone (PTH) as well as the nutritional support of calcium and vitamin D. New treatments such as tissue-selective estrogen receptor complexes (TSECs) are currently in use too. This review, which is based on a systematic appraisal of the current literature, provides current molecular and genetic opinions on osteoporosis and its medical treatment. It offers evidence-based information to help researchers and clinicians with osteoporosis assessment. However, many issues regarding osteoporosis and its treatment remain unknown or controversial and warrant future investigation.

18F-fluoride as a prognostic indicator of bone regeneration

Positron emission tomography (PET) is a form of nuclear imaging, which quantitatively assesses the metabolic activity through the uptake of radioactive tracers. ¹⁸F-fluoride is a positron-emitting isotope with high affinity for bone. Despite its potential as a non-invasive measure of bone metabolism, quantitative ¹⁸F-fluoride PET has only been used sparsely in orthopaedic applications. It has been speculated that ¹⁸F-fluoride PET characterizes cellular activity of bone forming cells in the early stages of the regenerative process and therefore precedes the mineralization detected by conventional computed tomography (CT). Our aim was thus to combine in vivo PET and CT to map the spatiotemporal course of bone regeneration during fracture healing using an open femur fracture model in the rat and characterize regeneration in untreated and pharmacologically treated fractures using both imaging modalities. We hypothesized that PET ¹⁸F-fluoride tracer activity at an earlier time point is predictive of CT measured bone formation at a later time point. On the basis of the RMSE and R² metrics of linear regression models it was conceivable for bone volumes to be predicted up to three weeks in advance in a rodent model (RMSE: 14 mm³-18 mm³, R²: 0.79-0.82). Moreover, the data suggested that ¹⁸F-fluoride positron-emitting activity had the potential to separate bone formation from resorption and thus could be of interest across a wide array of orthopaedic applications. Based on this data, we conclude that ¹⁸F-fluoride positron-emitting activity is strongly correlated to bone formation and could potentially predict the volume of bone regenerated at fracture sites. The volume of bone regenerated at a fracture site can be interpreted as a measure of the healing response and ¹⁸F-fluoride should be further investigated as a predictive diagnostic tool to identify if bone fractures will heal successfully or result in delayed healing or non-union. STATEMENT OF SIGNIFICANCE: We aimed to combine in vivo PET and CT imaging to map the spatiotemporal course of bone regeneration during fracture healing using an open femur fracture model in the rat and characterize regeneration in untreated and pharmacologically treated fractures using both imaging modalities. We hypothesized that PET ¹⁸F-fluoride tracer activity at an earlier time point is predictive of CT measured bone formation at a later time point. Our data suggest that ¹⁸F-fluoride positron-emitting activity can separate bone formation from resorption and thus could be of interest across a wide array of orthopaedic applications including as a predictive diagnostic tool to identify if fractures will heal successfully or result in delayed healing or non-union.