Synthesis of MgAC-Fe3O4/TiO2 hybrid nanocomposites via sol-gel chemistry for water treatment by photo-Fenton and photocatalytic reactions

Oil well-produced water pollutant adsorption and photodegradation using an innovative double Z-scheme ternary heterostructure of MIL-101(Cr)/Fe3O4-SiO2/nanorod-graphitic carbon nitride: adsorption isotherm and degradation kinetic study

An innovative ternary heterostructure, MIL-101(Cr)/Fe3O4-SiO2/nanorod-graphitic carbon nitride (MIL-Cr/F@S/nr-GCN), was synthesized by hydrothermal technique. Comprehensive physiochemical characterizations were conducted to elucidate the structural and optical properties. The synthesized photocatalysts were evaluated for adsorption and photodegradation of oil well-produced water pollutants. Remarkably, the ternary heterostructure composite with 20 wt% of nr-GCN exhibited superior photocatalytic performance compared to nr-GCN and the MIL-Cr/F@S binary composite. Under visible-light illumination, the maximum removal efficiency of chemical oxygen demand for synthetic oil well-produced water reached 97.4% under optimized conditions (pH 4, illumination time 90 min, photocatalyst dosage 0.6 g/L, and pollutant initial concentration 754 mg/L). Adsorption studies revealed adherence to the pseudo-second-order kinetic and Freundlich isotherm models The ternary composite displayed degradation rates 2.8 and 2 times higher than nr-GCN and MIL-Cr/F@S, respectively. This enhanced activity was attributed to the double Z-scheme configuration, providing high specific surface area (653 m2/g), appropriate bandgap energy (1.6 eV), and efficient charge carrier separation. Moreover, the ternary photocatalysts demonstrated excellent reusability over five cycles without Cr ions leaching into the water. These findings underscore the potential of the novel ternary heterostructure as a green and robust photocatalyst for oil well-produced water treatment.

3D/1D Fe3O4@TiO2/TC-TiO2/SiO2 Magnetic Inorganic-Framework Molecularly Imprinted Fibers for Targeted Photodegradation

To achieve a selective degradation of pollutants in a water body, 3D/1D magnetic molecularly imprinted fibers Fe3O4@TiO2/TC-TiO2/SiO2 were fabricated by an electrospinning method. The molecularly imprinted layer was successfully prepared by a direct imprinting method using TiO2 as a functional monomer. Fe3O4 facilitates the catalyst recovery and light utilization. The as-prepared fibrous photocatalyst has a large specific surface area of 132.4 m2/g. The successful generation of imprinted sites was proven by various characterizations. The weak interaction between the inorganic functional monomer and tetracycline (TC) was determined to be van der Waals force and hydrogen bonds by the IGMH isosurface theory. The construction of the 3D/1D homojunction of molecularly imprinted materials is beneficial to charge transfer. The as-prepared photocatalyst exhibits a high selectivity coefficient α = 737.38 competing with RhB. The TC removal efficiency reached 100% within only 20 min. In addition, the possible degradation pathway and the degradation mechanism are reasonably proposed. This work not only provides an in-depth mechanism of the weak interaction between the inorganic molecularly imprinted functional monomer and pollutant molecules but also offers new thoughts on the fabrication of photocatalysts for the effective and selective treatment of pollutants in water bodies.

ZnO nanostructured matrix as nexus catalysts for the removal of emerging pollutants

Water pollution stands as a pressing global environmental concern, elevating the significance of innovative, dependable, and sustainable solutions. This study represents an extensive review of the use of photocatalytic zinc oxide nanoparticles (ZnO NPs) for the removal of emerging pollutants from water and wastewater. The study examines ZnO NPs' different preparation methods, including physical, chemical, and green synthesis, and emphasizes on advantages, disadvantages, preparation factors, and investigation methods for the structural and morphological properties. ZnO NPs demonstrate remarkable properties as photocatalysts; however, their small dimensions pose an issue, leading to potential post-use environmental losses. A strategy to overcome this challenge is scaling up ZnO NP matrices for enhanced stability and efficiency. The paper introduces novel ZnO NP composites, by incorporating supports like carbon and clay that serve as photocatalysts in the removal of emerging pollutants from water and wastewater. In essence, this research underscores the urgency of finding innovative, efficient, and eco-friendly solutions for the removal of emerging pollutants from wastewater and highlights the high removal efficiencies obtained when using ZnO NPs obtained from green synthesis as a photocatalyst. Future research should be developed on the cost-benefit analysis regarding the preparation methods, treatment processes, and value-added product regeneration efficiency.

Facile synthesis of low toxicity iron oxide/TiO2 nanocomposites with hyperthermic and photo-oxidation properties

The present study aimed to assess the feasibility of developing low-cost multipurpose iron oxide/TiO2 nanocomposites (NCs) for use in combined antitumor therapies and water treatment applications. Larger size (≈ 100 nm) iron oxide nanoparticles (IONPs) formed magnetic core-TiO2 shell structures at high Fe/Ti ratios and solid dispersions of IONPs embedded in TiO2 matrices when the Fe/Ti ratio was low. When the size of the iron phase was comparable to the size of the crystallized TiO2 nanoparticles (≈ 10 nm), the obtained nanocomposites consisted of randomly mixed aggregates of TiO2 and IONPs. The best inductive heating and ROS photogeneration properties were shown by the NCs synthesized at 400 °C which contained the minimum amount of α-Fe2O3 and sufficiently crystallized anatase TiO2. Their cytocompatibility was assessed on cultured human and murine fibroblast cells and analyzed in relation to the adsorption of bovine serum albumin from the culture medium onto their surface. The tested nanocomposites showed excellent cytocompatibility to human fibroblast cells. The results also indicated that the environment (i.e. phosphate buffer or culture medium) used to disperse the nanomaterials prior to performing the viability tests can have a significant impact on their cytotoxicity.

Highly Efficient Photocatalyst Fabricated from the Chemical Recycling of Iron Waste and Natural Zeolite for Super Dye Degradation

In this paper, Fe2O3 and Fe2O3-zeolite nanopowders are prepared by chemical precipitation utilizing the rusted iron waste and natural zeolite. In addition to the nanomorphologies; the chemical composition, structural parameters, and optical properties are examined using many techniques. The Fe2O3-zeolite photocatalyst showed smaller sizes and higher light absorption in visible light than Fe2O3. Both Fe2O3 and Fe2O3-zeolite are used as photocatalysts for methylene blue (MB) photodegradation under solar light. The effects of the contact time, starting MB concentration, Fe2O3-zeolite dose, and pH value on photocatalytic performance are investigated. The full photocatalytic degradation of MB dye (10 mg/L) is achieved using 75 mg of Fe2O3-zeolite under visible light after 30 s, which, to the best of our knowledge, is the highest performance yet for Fe2O3-based photocatalysts. This photocatalyst has also shown remarkable stability and recyclability. The kinetics and mechanisms of the photocatalytic process are studied. Therefore, the current work can be applied industrially as a cost-effective method for eliminating the harmful MB dye from wastewater and recycling the rusted iron wires.

A hybrid design of Ag-decorated ZnO on layered nanomaterials (MgAC) with photocatalytic and antibacterial dual-functional abilities

In this work, Ag@ZnO and Ag@ZnO/MgAC photocatalysts were synthesized using a simple two-step electrochemical method by the addition of magnesium aminoclay (MgAC) as a great stabilizer and a Lewis base, which could donate electrons for reduction of Ag⁺ and Zn²⁺ ions, facilitating uniform formation as well as effective inhibition of aggregation of Ag@ZnO nanoparticles (NPs) on the MgAC matrix. Ag@ZnO and Ag@ZnO/MgAC were investigated for photocatalytic degradation of MB and their antibacterial efficiencies. Ag@ZnO/MgAC showed excellent photocatalytic MB degradation with a performance of 98.56% after 80 min of visible-light irradiation and good antibacterial activity against Salmonella (Sal) and Staphylococcus aureus (S. aureus) bacterial strains, providing promising high application potential. Herein, different from the bare ZnO NPs, for Ag@ZnO/MgAC nanocomposites, Ag@ZnO NPs functioned as an effective photocatalyst under visible light illumination, in which, incorporated Ag atoms in the ZnO crystal structure caused the increase in a larger number of lattice defect sites. Benefiting from the strong surface plasmon resonance (SPR) effect of Ag and energy band matching between ZnO and Ag, the visible light absorption capacity and the separation of the photogenerated charge carriers were promoted. Therefore, the MB degradation efficiency of Ag@ZnO/MgAC was considerably accelerated in the presence of produced radicals from visible light illumination.

Dual-functional Ag@ZnO/MgAC nanocomposites for photocatalytic and antibacterial applications synthesized by a simple two-step electrochemical method.

UV-Light-Driven Enhancement of Peroxidase-Like Activity of Mg-Aminoclay-Based Fe3O4/TiO2 Hybrids for Colorimetric Detection of Phenolic Compounds

Light-activated nanozymes possess several advantages, such as light-mediated activity regulation, utilization of molecular oxygen as a green oxidant, and highly enhanced activity; however, the types of light-activated nanozymes are still limited. In this study, we found that Mg aminoclay-based Fe3O4/TiO2 hybrids (MgAC-Fe3O4/TiO2) exhibited peroxidase-like catalytic activity to catalyze the oxidation of the peroxidase substrate 2,2′-azino-bis(3-ethylbenzo-thiazoline-6-sulfonic acid) diammonium salt (ABTS) in the presence of H2O2, which was significantly enhanced under ultraviolet (UV)-light irradiation. Compared with MgAC-Fe3O4 and MgAC-TiO2, MgAC-Fe3O4/TiO2 showed around three-fold enhancement in the absorption intensity corresponding to the oxidized ABTS under UV-light irradiation, presumably due to the synergistic effect between Fe3O4 and TiO2, thereby facilitating photocatalytic electron transfer during the catalytic action. In addition, the MgAC-Fe3O4/TiO2 showed vivid stability enhancement in wide range of pH and temperature values compared with natural peroxidase. The UV-light-driven MgAC-Fe3O4/TiO2-based system was successfully applied for the colorimetric detection of phenolic compounds, including pyrocatechol and resorcinol, in a dynamic linear range of 0.15–1.30 mg/mL with a limit of detection as low as 0.1 mg/mL. Further, the system could successfully determine the phenolic compounds in spiked tap water, and thus, it can be used for practical applications. We believe that the UV-light-driven enhancement in the peroxidase-like catalytic performances highlights the potential of MgAC-Fe3O4/TiO2 for detecting phenolic compounds as well as other clinically and environmentally important substances.

Self-Assembly of Nanosheet-Supported Fe-MOF Heterocrystals as a Reusable Catalyst for Boosting Advanced Oxidation Performance via Radical and Nonradical Pathways

Heterojunction catalysts have drawn increasing interest for the visible light-driven Fenton reaction and bring tremendous opportunities for environmental remediation. Herein, a BiOI/MIL-53(Fe) Z-scheme heterojunction (named BMFe) was synthesized for the first time via a facile strategy. Compared with pristine BiOI and MIL-53(Fe) catalysts, the two-dimensional/three-dimensional (2D/3D) heterojunction catalyst manifested remarkable catalytic performance toward degradation of phenol, bisphenol A, methylene blue, and carbamazepine, which is attributed mainly to the interfacial integration and efficient charge separation. By virtue of coupling at the interface, as confirmed by XPS, ⁵⁷Fe Mössbauer spectroscopy, and DFT calculations, the BMFe catalyst promoted the transfer of electron-hole pairs via Z-scheme and improved the chemical activation of hydrogen peroxide. The subsequent holes, free radicals, and nonradicals can effectively and continuously decompose pollutants, achieving a positive synergistic effect between photocatalysis and Fenton reactions. Simultaneously, the specially designed BiOX(X = Br, Cl)/MIL-53(Fe) and BiOI/Fe-MOFs(MIL-101, MIL-88) heterojunctions also exhibited advanced oxidative capacity for organic pollutants. Given their practical value for industrial applications, BMFe beads (1.0 ± 0.15 mm) synthesized via a blend cross-linking method can significantly advance long-term stability and recyclability. The integration of Fe-based metal-organic frameworks with bismuth oxyhalide semiconductors provides a new perspective on developing heterojunction catalysts for environmental remediation.

Mesoporous silica synthesized from natural local kaolin as an effective adsorbent for removing of Acid Red 337 and its application in the treatment of real industrial textile effluent

This paper presents a synthesis of mesoporous silica (MS) from natural clay as a silica source using Pluronic L35 (EO11PO16EO11) as a structure-directing agent. The prepared material was characterized by XRD, X-ray fluorescence, thermogravimetric analysis, SEM, TEM, and N2 adsorption-desorption analyses. Then, mesoporous material was used for the removal of Acid Red 337 (AR337) from aqueous solution, and the treatment of real textile effluent. The effect of pH, contact time, weight of adsorbent, and initial concentration was studied in batch adsorption. The synthesized mesoporous material showed good discoloration efficiency with a 62% percentage. Experiment with real textile wastewater showed that 39%, 40%, and 31.5% of the color, TOC, and chemical oxygen demand respectively were eliminated by using 1 g of MS per liter of wastewater.

Hydrothermally Assisted Fabrication of TiO2-Fe3O4 Composite Materials and Their Antibacterial Activity

The TiO2-Fe3O4 composite materials were fabricated via the hydrothermal-assisted technique. It was determined how the molar ratio of TiO2 to Fe3O4 influences the crystalline structure and morphology of the synthesized composite materials. The effect of the molar ratio of components on the antibacterial activity was also analyzed. On the basis of XRD patterns for the obtained titanium(IV) oxide-iron(II, III) oxide composites, the two separate crystalline forms-anatase and magnetite -were observed. Transmission electron microscopy revealed particles of cubic and tetragonal shape for TiO2 and spherical for Fe3O4. The results of low-temperature nitrogen sorption analysis indicated that an increase in the iron(II, III) oxide content leads to a decrease in the BET surface area. Moreover, the superparamagnetic properties of titanium(IV) oxide-iron(II, III) oxide composites should be noted. An important aim of the work was to determine the antibacterial activity of selected TiO2-Fe3O4 materials. For this purpose, two representative strains of bacteria, the Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, were used. The titanium(IV) oxide-iron(II, III) oxide composites demonstrated a large zone of growth inhibition for both Gram-positive and Gram-negative bacteria. Moreover, it was found that the analyzed materials can be reused as antibacterial agents in three consecutive cycles with good results.

Titanium Dioxide Microscale and Macroscale Structures: A Mini-Review

Titanium dioxide nanoparticles (TiO2 NPs) have some limitations, such as their low surface area, high bandgap energy, and low recycling ability. To overcome these limitations, TiO2 can be prepared in microscale/macroscale structures. TiO2 microscale structures, in comparison with TiO2 nanopowder, have higher surface areas, more tunable pore structures, and better top photocatalytic activity. In contrast, for TiO2 macroscale structures, although the surface area is lower than TiO2 nanopowder in many cases, they still achieve similar or better photocatalytic performance due to their unique properties. Moreover, both TiO2 microscale and macroscale structures can be easily recovered from reaction media. The difference between these two types of TiO2 structures is a function not only of size but also of the preparation process. Every type of TiO2 structure has its own advantages and disadvantages, as will be discussed further in the following pages. Future perspectives on this research field also will be discussed.

Iron oxide nanocatalyst with titanium and silver nanoparticles: Synthesis, characterization and photocatalytic activity on the degradation of Rhodamine B dye

Nowadays, there is a growing concern about the environmental impacts of colored wastewater. Thus, the present work aims the synthesis, characterization and determination of photocatalytic activity of iron oxide (Fe₂O₃) nanocatalyst, evaluating the effect of hybridization with titanium (TiNPs-Fe₂O₃) and silver (AgNPs-Fe₂O₃) nanoparticles, on the degradation of Rhodamine B dye (RhB). Nanocatalysts were characterized by XRD, SEM, TEM, FTIR, N₂ porosimetry (BET/BJH method), zeta potential and DRS. Photocatalytic tests were performed in a slurry reactor, with the nanocatalyst in suspension, using RhB as a target molecule, under ultraviolet (UV) and visible radiation. Therefore, the photocatalytic activity of the nanocatalysts (non-doped and hybridized) was evaluated in these ideal conditions, where the AgNPs-Fe₂O₃ sample showed the best photocatalytic activity with a degradation of 94.1% (k = 0.0222  min⁻¹, under UV) and 58.36% (k = 0.007  min⁻¹, under visible), while under the same conditions, the TiO₂-P25 commercial catalyst showed a degradation of 61.5% (k = 0.0078  min⁻¹) and 44.5% (k = 0.0044  min⁻¹), respectively. According with the ideal conditions determined, reusability of the AgNPs-Fe₂O₃ nanocatalyst was measured, showing a short reduction (about 8%) of its photocatalytic activity after 5 cycles. Thus, the Fe₂O₃ nanocatalyst can be considered a promising catalyst in the heterogeneous photocatalysis for application in the degradation of organic dyes in aqueous solution.