Metal-organic Framework-driven Porous Cobalt Disulfide Nanoparticles Fabricated by Gaseous Sulfurization as Bifunctional Electrocatalysts for Overall Water Splitting

Hollow-structured cobalt sulfide electrocatalyst for alkaline oxygen evolution reaction: Rational tuning of electronic structure using iron and fluorine dual-doping strategy

Utilizing renewable electricity for water electrolysis offers a promising way for generating high-purity hydrogen gases while mitigating the emission of environmental pollutants. To realize the water electrolysis, it is necessary to develop highly active and precious metal-free electrocatalyst for oxygen evolution reaction (OER) which incurs significant overpotential due to its complicated four-electron transfer mechanism. Hence, we propose a facile preparation method for hollow-structured Fe and F dual-doped CoS2 nanosphere (Fe-CoS2-F) as an efficient OER electrocatalyst. The uniform hollow and porous structure of Fe-CoS2-F enlarge the specific surface area and increase the number of exposed active sites. Furthermore, the Fe and F dual-dopants synergistically contributed to the adjustment of electronic structure, thereby promoting the adsorption/desorption of oxygen-containing reaction intermediates on active sites during the alkaline OER procedure. As a result, the prepared Fe-CoS2-F exhibits outstanding OER activity, characterized by a low overpotential of 298 mV to achieve a current density of 10 mA cm-2 and a Tafel slope as small as 46.0 mV dec-1. Based on computational theoretical calculations, the introduction of the dual-dopants into CoS2 structure reduce the excessively strong adsorption energy of reaction intermediate in the rate determining step, leading to effectively promoted electrocatalytic cycle for OER in alkaline environment. This study presents an effective strategy for preparing noble metal-free OER electrocatalysts with promising potential for large-scale industrial water electrolysis.

Selective Reduction of Multivariate Metal-Organic Frameworks for Advanced Electrocatalytic Cathodes in High Areal Capacity and Long-Life Lithium-Sulfur Batteries

Lithium-sulfur batteries hold great promise as next-generation high-energy-density batteries. However, their performance has been limited by the low cycling stability and sulfur utilization. Herein, we demonstrate that a selective reduction of the multivariate metal-organic framework, MTV-MOF-74 (Co, Ni, Fe), transforms the framework into a porous carbon decorated with bimetallic CoNi alloy and Fe3O4 nanoparticles capable of entrapping soluble lithium polysulfides while synergistically facilitating their rapid conversion into Li2S. Electrochemical studies on coin cells containing 89 wt % sulfur loading revealed a reversible capacity of 1439.8 mA h g-1 at 0.05 C and prolonged cycling stability for 1000 cycles at 1 C/1060.2 mA h g-1 with a decay rate of 0.018% per cycle. At a high areal sulfur loading of 6.9 mg cm-2 and lean electrolyte/sulfur ratio (4.5 μL:1.0 mg), the battery based on the 89S@CoNiFe3O4/PC cathode provides a high areal capacity of 6.7 mA h cm-2. The battery exhibits an outstanding power density of 849 W kg-1 at 5 C and delivers a specific energy of 216 W h kg-1 at 2 C, corresponding to a specific power of 433 W kg-1. Density functional theory shows that the observed results are due to the strong interaction between the CoNi alloy and Fe3O4, facilitated by charge transfer between the polysulfides and the substrate.

Principles of Design and Synthesis of Metal Derivatives from MOFs

Materials derived from metal-organic frameworks (MOFs) have demonstrated exceptional structural variety and complexity and can be synthesized using low-cost scalable methods. Although the inherent instability and low electrical conductivity of MOFs are largely responsible for their low uptake for catalysis and energy storage, a superior alternative is MOF-derived metal-based derivatives (MDs) as these can retain the complex nanostructures of MOFs while exhibiting stability and electrical conductivities of several orders of magnitude higher. The present work comprehensively reviews MDs in terms of synthesis and their nanostructural design, including oxides, sulfides, phosphides, nitrides, carbides, transition metals, and other minor species. The focal point of the approach is the identification and rationalization of the design parameters that lead to the generation of optimal compositions, structures, nanostructures, and resultant performance parameters. The aim of this approach is to provide an inclusive platform for the strategies to design and process these materials for specific applications. This work is complemented by detailed figures that both summarize the design and processing approaches that have been reported and indicate potential trajectories for development. The work is also supported by comprehensive and up-to-date tabular coverage of the reported studies.

Effect of Cooperative Redox Property and Oxygen Vacancies on Bifunctional OER and HER Activities of Solvothermally Synthesized CeO2/CuO Composites

Herein, we report the synthesis of the CeO₂/CuO composite as a bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) electrocatalyst in a basic medium. The electrocatalyst with an optimum 1:1 CeO₂/CuO shows low OER and HER overpotentials of 410 and 245 mV, respectively. The Tafel slopes of 60.2 and 108.4 mV/dec are measured for OER and HER, respectively. More importantly, the 1:1 CeO₂/CuO composite electrocatalyst requires only a 1.61 V cell voltage to split water to achieve 10 mA/cm² in a two-electrode cell. The role of oxygen vacancies and the cooperative redox activity at the interface of the CeO₂ and CuO phases is explained in the light of Raman and XPS studies, which play the determining factor for the enhanced bifunctional activity of the 1:1 CeO₂/CuO composite. This work provides guidance for the optimization and design of a low-cost alternative electrocatalyst to replace the expensive noble-metal-based electrocatalyst for overall water splitting.

Recent development and challenges in fuel cells and water electrolyzer reactions: an overview

Water electrolysis is the most promising method for the production of large scalable hydrogen (H2), which can fulfill the global energy demand of modern society. H2-based fuel cell transportation has been operating with zero greenhouse emission to improve both indoor and outdoor air quality, in addition to the development of economically viable sustainable green energy for widespread electrochemical applications. Many countries have been eagerly focusing on the development of renewable as well as H2-based energy storage infrastructure to fulfill their growing energy demands and sustainable goals. This review article mainly discusses the development of different kinds of fuel cell electrocatalysts, and their application in H2 production through various processes (chemical, refining, and electrochemical). The fuel cell parameters such as redox properties, cost-effectiveness, ecofriendlyness, conductivity, and better electrode stability have also been highlighted. In particular, a detailed discussion has been carried out with sufficient insights into the sustainable development of future green energy economy.

Metal-organic framework assisted vanadium oxide nanorods as efficient electrode materials for water oxidation

The water oxidation process, which comprises the oxygen evolution reaction (OER), is a critical catalytic mechanism for sustainable technologies like water electrolysis and fuel cells. Herein, we develop a unique metal-organic framework aided vanadium pentoxide nanorods (MOF-V₂O₅ NRs-500) that can be used as an OER electrocatalyst under alkaline solutions. The crystal structure, surface chemical state, and porosity of MOF-V₂O₅ NRs-500 can be altered by annealing in an oxygen atmosphere. The resultant MOF-V₂O₅ NRs-500 demonstrate high catalytic activity against OER in basic conditions, with a low overpotential of 300 mV at a derived current density of 50 mA cm^-2, and extraordinary durability of more than 50 h. Superior electrochemical performance might be attributed to the high exposure level of active sites emanating from porous MOF-V₂O₅ NRs-500. Furthermore, the porous MOF-V₂O₅ NRs-500 skeleton may provide homogenous mass transport channels as well as quick electron transfer.

Interface engineering of cobalt-sulfide-selenium core-shell nanostructures as bifunctional electrocatalysts toward overall water splitting

The number of active sites and stability of the structure of electrocatalysts are the key factors in the process of overall water splitting. In this paper, cobalt-sulfide-selenium (Se:CoS_2-x) core-shell nanostructures are prepared by a simple two-step method, including hydrothermal reaction and chemical vapor deposition. The resulting product exhibits excellent electrochemical performance, owing to the synergistic effects between CoS₂ and CoSe_1-x, as well as the plentiful active sites in the electrode structure. The Se:CoS_2-x material shows a more improved hydrogen evolution reaction activity compared to CoS₂ and Co(OH)Cl precursor catalysts, with a low overpotential of only 240 mV achieved at 10 mA cm^-2. Meanwhile, Se:CoS_2-x as a bifunctional water splitting catalyst also shows remarkably improved oxygen evolution reaction activity, with a low overpotential of only 1.32 V at 10 mA cm^-2. The above results show that selenide/sulfide materials provide a new research direction for discovering high-performance and cheap electrode materials.

Designing MOF Nanoarchitectures for Electrochemical Water Splitting

Electrochemical water splitting has attracted significant attention as a key pathway for the development of renewable energy systems. Fabricating efficient electrocatalysts for these processes is intensely desired to reduce their overpotentials and facilitate practical applications. Recently, metal-organic framework (MOF) nanoarchitectures featuring ultrahigh surface areas, tunable nanostructures, and excellent porosities have emerged as promising materials for the development of highly active catalysts for electrochemical water splitting. Herein, the most pivotal advances in recent research on engineering MOF nanoarchitectures for efficient electrochemical water splitting are presented. First, the design of catalytic centers for MOF-based/derived electrocatalysts is summarized and compared from the aspects of chemical composition optimization and structural functionalization at the atomic and molecular levels. Subsequently, the fast-growing breakthroughs in catalytic activities, identification of highly active sites, and fundamental mechanisms are thoroughly discussed. Finally, a comprehensive commentary on the current primary challenges and future perspectives in water splitting and its commercialization for hydrogen production is provided. Hereby, new insights into the synthetic principles and electrocatalysis for designing MOF nanoarchitectures for the practical utilization of water splitting are offered, thus further promoting their future prosperity for a wide range of applications.

Electrochemical oxidation of boron-doped nickel-iron layered double hydroxide for facile charge transfer in oxygen evolution electrocatalysts

The oxygen evolution reaction (OER) is the key reaction in water splitting systems, but compared with the hydrogen evolution reaction (HER), the OER exhibits slow reaction kinetics. In this work, boron doping into nickel-iron layered double hydroxide (NiFe LDH) was evaluated for the enhancement of OER electrocatalytic activity. To fabricate boron-doped NiFe LDH (B:NiFe LDH), gaseous boronization, a gas-solid reaction between boron gas and NiFe LDH, was conducted at a relatively low temperature. Subsequently, catalyst activation was performed through electrochemical oxidation for maximization of boron doping and improved OER performance. As a result, it was possible to obtain a remarkably reduced overpotential of 229 mV at 10 mA cm-2 compared to that of pristine NiFe LDH (315 mV) due to the effect of facile charge-transfer resistance by boron doping and improved active sites by electrochemical oxidation.

Effects of Structure and Constituent of Prussian Blue Analogs on Their Application in Oxygen Evolution Reaction

The importance of advanced energy-conversion devices such as water electrolysis has manifested dramatically over the past few decades because it is the current mainstay for the generation of green energy. Anodic oxygen evolution reaction (OER) in water splitting is one of the biggest obstacles because of its extremely high kinetic barrier. Conventional OER catalysts are mainly noble-metal oxides represented by IrO2 and RuO2, but these compounds tend to have poor sustainability. The attention on Prussian blue (PB) and its analogs (PBA) in the field of energy conversion systems was concentrated on their open-framework structure, as well as its varied composition comprised of Earth-abundant elements. The unique electronic structure of PBA enables its promising catalytic potential, and it can also be converted into many other talented compounds or structures as a precursor. This undoubtedly provides a new approach for the design of green OER catalysts. This article reviews the recent progress of the application of PBA and its derivatives in OER based on in-depth studies of characterization techniques. The structural design, synthetic strategy, and enhanced electrochemical properties are summarized to provide an outlook for its application in the field of OER. Moreover, due to the similarity of the reaction process of photo-driven electrolysis of water and the former one, the application of PBA in photoelectrolysis is also discussed.