Photocatalytic degradation of industrial acrylonitrile wastewater by F-S-Bi-TiO2 catalyst of ultrafine nanoparticles dispersed with SiO2 under natural sunlight

Degradation and mechanism of PFOA by peroxymonosulfate activated by nitrogen-doped carbon foam-anchored nZVI in aqueous solutions

Perfluorooctanoic acid (PFOA) is an emerging pollutant that is non-biodegradable and presents severe environmental and human health risks. In this study, we present an effective and mild approach for PFOA degradation that involves the use of nitrogen-doped carbon foam anchored with nanoscale zero-valent iron (nZVI@NCF) to activate low concentration peroxymonosulfate (PMS) for the treatment. The nZVI@NCF/PMS system efficiently removed 84.4% of PFOA (2.4 μM). The active sites of nZVI@NCF including Fe0 (110) and graphitic nitrogen played crucial roles in the degradation. Electrochemical analyses and density functional theory calculations revealed that nZVI@NCF acted as an electronic donor, transferring electrons to both PMS and PFOA during the reaction. By further analyzing the electron paramagnetic resonance and byproducts, it was determined that electron transfer and singlet oxygen were responsible for PFOA degradation. Three degradation pathways involving decarboxylation and surface reduction of PFOA in the nZVI@NCF/PMS system were determined. Finding from this study indicate that nZVI@NCF/PMS systems are effective in degrading PFOA and thus present a promising persulfate-advanced oxidation process technology for PFAS treatment.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Luminescence and photocatalytic degradation of indigo carmine in the presence of Sm3+doped ZnS nanoparticles

Industrial wastewater discharge is well acknowledged to constitute a significant environmental and public health risk. In addition, synthetic dyes used in the textile sector are major culprits in water pollution. The amount of water polluted by these dyes is simply staggering. We urgently address this issue to protect our planet and health. The degradation of indigo carmine dye in the presence of Sm3+-doped ZnS nanoparticles is reported in this study and characterized by XRD, FTIR, SEM, EDX, TEM, BET, PL, UV, etc. The particle size calculated from the Scherrer equation was 3-12 nm. When excited at 395 nm, Sm3+ undergoes f-f transitions, which are visible as prominent peaks in the photoluminescence spectrum at 559, 595, and 642 nm wavelengths. The catalyst showed vigorous catalytic activity for dye degradation, with a 93% degradation rate when used at 15 mg/L catalyst within 210 min. The reaction was found to have pseudo-first-order kinetics. After applying the Freundlich and Langmuir data, the Langmuir isotherm offered the best fit. The findings indicate that the Sm3+-doped ZnS catalyst might be successfully used in the degradation of dyes present in the environment. Doping with Sm3+ ions can significantly change the photocatalytic breakdown of indigo carmine and the luminescence characteristics of ZnS.

Spent Coffee Grounds Derived Carbon Loading C, N Doped TiO2 for Photocatalytic Degradation of Organic Dyes

Titanium dioxide (TiO₂) is an ideal photocatalyst candidate due to its high activity, low toxicity and cost, and high chemical stability. However, its practical application in photocatalysis is seriously hindered by the wide band gap energy of TiO₂ and the prone recombination of electron-hole pairs. In this study, C, N doped TiO₂ were supported on spent coffee grounds-derived carbon (ACG) via in situ formation, which was denoted as C, N-TiO₂@ACG. The obtained C, N-TiO₂@ACG exhibits increased light absorption efficiency with the band gap energy decreasing from 3.31 eV of TiO₂ to 2.34 eV, a higher specific surface area of 145.8 m²/g, and reduced recombination rates attributed to the synergistic effect of a spent coffee grounds-derived carbon substrate and C, N doping. Consequently, the optimal 1:1 C, N-TiO₂@ACG delivers considerable photocatalytic activity with degradation efficiencies for methylene blue (MB) reaching 96.9% within 45 min, as well as a high reaction rate of 0.06348 min^-1, approximately 4.66 times that of TiO₂ (0.01361 min^-1). Furthermore, it also demonstrated greatly enhanced photocatalytic efficiency towards methyl orange (MO) in the presence of MB compared with a single MO solution. This work provides a feasible and universal strategy of synchronous introducing nonmetal doping and biomass-derived carbon substrates to promote the photocatalytic performance of TiO₂ for the degradation of organic dyes.

Gadolinium sesquisulfide anchored N-doped reduced graphene oxide for sensitive detection and degradation of carbendazim

Agriculture is having a major role in solving issues associated with food shortages across the globe. Carbendazim (CZM) is one of the fungicides which is commonly used in agriculture to grow crops in large quantities and fast. Monitoring CZM content is in high demand for environmental remediation. The present work deals with the synthesis of gadolinium sesquisulfide anchored Nitrogen-doped reduced graphene oxide (Gd₂S₃/NRGO) through a simple microwave-assisted method. X-ray diffraction and morphological studies confirm the formation of the nanocomposite. Gd₂S₃/NRGO showed enhanced activity both in electrochemical detection and light-driven degradation of CZM compared to Gd₂S₃ and NRGO. Gd₂S₃/NRGO modified glassy carbon electrode (GCE) exhibit a wide linear range of 0.01-450 μM CZM with 0.009 μM LOD using differential pulse voltammetry (DPV). Gd₂S₃/NRGO@GCE showed good selectivity, stability, and recovery (98.13-99.10%) in the river water sample. In addition, Gd₂S₃/NRGO has been explored towards the visible-light-induced degradation of CZM. The reactions conditions were optimized to achieve maximum efficiency. 94% of CZM was degraded within 90 min in presence of Gd₂S₃/NRGO. Mechanism of electrochemical redox reaction and degradation of CZM in presence of Gd₂S₃/NRGO has been explored to the maximum extent possible. Degradation intermediates were identified using LC-MS.

Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.

Modeling RSM of photocatalytic treatment of Acid Red 18 pollutant using ZnO–Cr nano-photocatalyst, kinetic studies, and energy management

The ZnO–Cr nano-photocatalyst was synthesized using a microwave-assisted solution combustion method and applied for the photodegradation of the organic pollutant Acid Red 18 (AR18). The synthesized nano-photocatalyst was characterized by XRD, FESEM, EDX, and FTIR methods. To reach the optimal condition of the treatment, the response surface methodology was used in the central composite design model. The amount of nano-photocatalyst, pH of the solution, and initial concentration of the pollutant were optimized. The polynomial 3-degree model was fitted to the photodegradation data, and the correlation coefficients of the model showed an interaction between the parameters. Optimization of the polynomial model for pollutant treatment was investigated under the same conditions, and the comparison of the observed and predicted treatment models showed a low difference in decolorization. The intermediates were identified by liquid chromatography/mass spectrometry. A kinetic study showed that the first-order kinetic constant for the degradation of pollutant concentrations from 10 to 30 mg L−1 changed from 0.0178 to 0.0058 min–1. Finally, economic evaluation and energy management of the process showed that the decolorization process was more economical at low pollutant concentrations.

Fe2.5Co0.3Zn0.2O4/CuCr-LDH as a visible-light-responsive photocatalyst for the degradation of caffeine, bisphenol A, and simazine in pure water and real wastewater under photo-Fenton-like degradation process

This paper outlines the synthesis and application of a sustainable composite for the photo-Fenton-like degradation of caffeine, bisphenol A, and simazine. The phase, morphology, optical and magnetic properties of the samples were evaluated by different characterization techniques. The composite of Fe_2.5Co_0.3Zn_0.2O₄ and copper-chromium layered double hydroxide (CuCr-LDH) was determined to be the most favorable photocatalyst in the photo-Fenton-like process when compared with Fe₃O₄, Fe_2.5Co_0.3Zn_0.2O₄, CuCr-LDH, and Fe₃O₄/CuCr-LDH composite. Studying the efficiency of the photo-Fenton-like degradation process in the presence of the Fe_2.5Co_0.3Zn_0.2O₄/CuCr-LDH composite revealed a degradation rate constant of caffeine twice more than the sum of those obtained for the individual processes. This ascribes to the synergistic effect by which the photo-generated electron-hole from the catalyst and the efficient reduction of Fe³⁺, Cu²⁺, etc. during the photo-Fenton-like reaction is accelerated. Moreover, under the optimal condition and after 120 min of heterogenous photo-Fenton-like process at natural pH, > 90% of pollutants mixture was decomposed. The experiments fulfilled in near-real conditions demonstrated I) the high stability and magnetically recoverability of the photocatalyst and II) the proper degradation performance of the applied heterogenous photo-Fenton-process in the removal of pollutant mixture in different water bodies and in the presence of chloride and bicarbonate ions.

Fabrication of Titanium Dioxide/Carbon Fiber (TiO2/CF) Composites for Removal of Methylene Blue (MB) from Aqueous Solution with Enhanced Photocatalytic Activity

TiO2 powder was firstly synthesized and carbon fiber was secondly prepared via the carbonization of polyaniline fiber, and TiO2/carbon fiber composites were lastly synthesized via a simple method at room temperature. The prepared samples are evidently investigated by X-ray powder diffraction, scanning electron microscopy, energy dispersive spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, photoluminescence spectrum, and X-ray photoelectron spectroscopy, respectively. Using the monochromatic light of ultraviolet, the photocatalytic activity of the TiO2/CF composites was accurately evaluated with respect to the degradation of an aqueous dye (methylene blue) solution. The relationship between the photocatalytic degradation of methylene blue dye and its ratio, contact time, and the amount of catalyst was studied. The kinetics and mechanisms of degradation were discussed. The results show that TiO2/CF composites have good photocatalytic activity and stability. The TiO2/CF2/1 composite was used in effective photocatalytic degradation of methylene blue, the weight ratio of TiO2 to carbon fiber was 2:1, and the degradation rate was obtaining up to 97.7% of degradation during 120 min of reaction. The photocatalytic stability of TiO2/CF composites was dependent on the stability of their structure. After 5 repeated uses, the composite TiO2/CF2/1 still exhibited rather high activity toward the degradation of methylene blue, where the decolorization efficiency of methylene blue achieved 92% and the loss of activity was negligible. Based on radical trapping experiments, the mechanism of TiO2/CF composites on photocatalytic degradation of methylene blue is proposed, which could explain the enhanced photocatalytic activity of the composites better. Superoxide radicals, photogenerated holes, and photogenerated electrons were the main active substances for methylene blue degradation.

Highly Selective Electrochemical Sensor Based on Gadolinium Sulfide Rod-Embedded RGO for the Sensing of Carbofuran

Nowadays, a lot of pesticides have been used in the agriculture field due to the global demand for food production. Carbofuran (CF) is the most commonly used carbamate compound that is responsible for the highest toxicity to humans compared to any other pesticide used in agricultural settings. Thus, rapid, portable, and low-cost sensors are needed for the detection of CF in the environment and food samples. Herein, we have successfully developed an electrochemical sensor using a glassy carbon electrode (GCE) modified with gadolinium sulfide (Gd₂S₃) and reduced graphene oxide (RGO) composite for the detection of carbofuran (CF). A novel Gd₂S₃/RGO composite was prepared by the facile hydrothermal route and confirmed by morphological and structural analyses such as field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray (EDX), powder X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), and also the formation mechanism of Gd₂S₃/RGO composite was discussed. The desired electrical conductivity of Gd₂S₃ was enhanced by the RGO, which was estimated from the electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Electrochemical studies demonstrated that the developed Gd₂S₃/RGO sensor was highly sensitive and selective to CF. In addition, the Gd₂S₃/RGO sensor exhibits a low detection limit (LOD) and the linear ranges were 0.0128 and 0.001-1381 μM, respectively, for CF detection under optimized experimental conditions. Moreover, we also investigated the practical applicability of the sensor for CF detection in the environment and food samples.