Elevated light intensity compensates for nitrogen deficiency during chrysanthemum growth by improving water and nitrogen use efficiency

The crosstalk of far-red energy and signaling defines the regulation of photosynthesis, growth, and flowering in tomatoes

This study investigated the effect of light intensity and signaling on the regulation of far-red (FR)-induced alteration in photosynthesis. The low (LL: 440 μmol m-2 s-1) and high (HL: 1135 μmol m-2 s-1) intensity of white light with or without FR (LLFR: 545 μmol m-2 s-1 including 115 μmol m-2 s-1; HLFR: 1254 μmol m-2 s-1 + 140 μmol m-2 s-1) was applied on the tomato cultivar (Solanum Lycopersicon cv. Moneymaker) and mutants of phytochrome A (phyA) and phytochrome B (phyB1, and phyB2). Both light intensity and FR affected plant morphological traits, leaf biomass, and flowering time. Irrespective of genotype, flowering was delayed by LLFR and accelerated by HLFR compared to the corresponding light intensity without FR. In LLFR, a reduced energy flux through the electron transfer chain along with a reduced energy dissipation per reaction center improved the maximum quantum yield of PSII, irrespective of genotype. HLFR increased net photosynthesis and gas exchange properties in a genotype-dependent manner. FR-dependent regulation of hormones was affected by light signaling. It appeared that PHYB affected the levels of abscisic acid and salicylic acid while PHYA took part in the regulation of CK in FR-exposed plants. Overall, light intensity and signaling of FR influenced plants' photosynthesis and growth by altering electron transport, gas exchange, and changes in the level of endogenous hormones.

Nitrogen and spent coffee ground for enhancing nutritional, morphological, flowering and antioxidant properties of Chrysanthemum (Chrysanthemum morfolium Ramat)

Chrysanthemum is one of the most attractive flowering plants widely grown commercially worldwide. Having a good source of organic fertilizers plays an important role in meeting the increasing demand for these plants, which requires high-quality flowers and a high survival time for the longest period. The effect of nitrogen (N) coupled with spent coffee ground (SCG) at various levels (0.0, 2.5, 5.0, 7.5, 10.0°% w/w) was evaluated on growth performance and chemical components of the Chrysanthemum over two years in a pot scale. Overall, total dry matter (TDM) was significantly enhanced with N+ by 125 and 97°% over N- in the first and second years, respectively. SCG also enhanced TDM up to the highest level of application in the range of 27-98°% and 18-81°% over SCG (0.0°%) in the same years, respectively. The interaction effect between N and SCG was perfect on TDM, flower number, and flower dry weight. Similarly, total antioxidant activities when N and SCG were coupled together gave respective increments ranging from 11.8 to 45.9 U/g DW and from 2.1 to 15.9 U/g DW compared to N alone (5.8 and 0.9 U/g DW) in both leaves and flowers, respectively. Extracts of plant treated with N and 10°% SCG exhibited a higher content of rosmarinic, caffeic, chlorogenic, vanillic acids, and rutin in the leaves. SCG as a natural organic source is easy to obtain and is a practical and cost-effective solution to plant nutrition, which can be valuable for ornamental plants, especially when combined with nitrogen.

Modulation of plant photosynthetic processes during metal and metalloid stress, and strategies for manipulating photosynthesis-related traits

Metals constitute vital elements for plant metabolism and survival, acting as essential co-factors in cellular processes which are indispensable for plant growth and survival. Excess or deficient provision of metal/metalloids puts plant's life and survival at risk, thus considered a potent stress for plants. Chloroplasts as an organelle with a high metal demand form a pivotal site within the metal homeostasis network. Therefore, the metal-mediated electron transport chain (ETC) in chloroplasts is a primary target site of metal/metalloid-induced stresses. Both excess and deficient availability of metal/metalloids threatens plant's photosynthesis in several ways. Energy demands from the photosynthetic carbon reactions should be in balance with energy output of ETC. Malfunctioning of ETC components as a result of metal/metalloid stress initiates photoinhiition. A feedback inhibition from carbon fixation process also impedes the ETC. Metal stress impairs antioxidant enzyme activity, pigment biosynthesis, and stomatal function. However, genetic manipulations, nutrient management, keeping photostasis, and application of phytohormones are among strategies for coping with metal stress. Consequently, a comprehensive understanding of the underlying mechanisms of metal/metalloid stress, as well as the exploration of potential strategies to mitigate its impact on plants are imperative. This review offers a mechanistic insight into the disruption of photosynthesis regulation by metal/metalloids and highlights adaptive approaches to ameliorate their effects on plants. Focus was made on photostasis, nutrient interactions, phytohormones, and genetic interventions for mitigating metal/metalloid stresses.

Optimizing supplemental light spectrum improves growth and yield of cut roses

During the seasons with limited light intensity, reductions in growth, yield, and quality are challenging for commercial cut rose production in greenhouses. Using artificial supplemental light is recommended for maintaining commercial production in regions with limited light intensity. Nowadays, replacing traditional lighting sources with LEDs attracted lots of attention. Since red (R) and blue (B) light spectra present the important wavelengths for photosynthesis and growth, in the present study, different ratios of supplemental R and B lights, including 90% R: B 10% (R90B10), 80% R: 20% B (R80B20), 70% R: 30% B (R70B30) with an intensity of 150 µmol m-2 s-1 together with natural light and without supplemental light (control) were applied on two commercial rose cultivars. According to the obtained results, supplemental light improved growth, carbohydrate levels, photosynthesis capacity, and yield compared to the control. R90B10 in both cultivars reduced the time required for flowering compared to the control treatment. R90B10 and R80B20 obtained the highest number of harvested flower stems in both cultivars. Chlorophyll and carotenoid levels were the highest under control. They had a higher ratio of B light, while carbohydrate and anthocyanin contents increased by having a high ratio of R light in the supplemental light. Analysis of chlorophyll fluorescence was indicative of better photosynthetic performance under a high ratio of R light in the supplemental light. In conclusion, the R90B10 light regime is recommended as a suitable supplemental light recipe to improve growth and photosynthesis, accelerate flowering, and improve the yield and quality of cut roses.

Genotype-dependent Strategies to "Overcome" Excessive Light: Insights into Non-Photochemical Quenching under High Light Intensity

High light (HL) intensities have a significant impact on energy flux and distribution within photosynthetic apparatus. To understand the effect of high light intensity (HL) on the HL tolerance mechanisms in tomatoes, we examined the response of the photosynthesis apparatus of 12 tomato genotypes to HL. A reduced electron transfer per reaction center (ET0 /RC), an increased energy dissipation (DI0 /RC) and non-photochemical quenching (NPQ), along with a reduced maximum quantum yield of photosystem II (FV /FM ), and performance index per absorbed photon (PIABS ) were common HL-induced responses among genotypes; however, the magnitude of those responses was highly genotype-dependent. Tolerant and sensitive genotypes were distinguished based on chlorophyll fluorescence and energy-quenching responses to HL. Tolerant genotypes alleviated excess light through energy-dependent quenching (qE ), resulting in smaller photoinhibitory quenching (qI ) compared to sensitive genotypes. Quantum yield components also shifted under HL, favoring the quantum yield of NPQ (ՓNPQ ) and the quantum yield of basal energy loss (ՓN0 ), while reducing the efficient quantum yield of PSII (ՓPSII ). The impact of HL on tolerant genotypes was less pronounced. While the energy partitioning ratio did not differ significantly between sensitive and tolerant genotypes, the ratio of NPQ components, especially qI , affected plant resilience against HL. These findings provide insights into different patterns of HL-induced NPQ components in tolerant and sensitive genotypes, aiding the development of resilient crops for heterogeneous light conditions.

Artificial neural network (ANN)-based algorithms for high light stress phenotyping of tomato genotypes using chlorophyll fluorescence features

High light (HL) is a common environmental stress directly imposes photoinhibition on the photosynthesis apparatus. Breeding plants for tolerance against HL is therefore highly demanded. Chlorophyll fluorescence (ChlF) is a sensitive indicator of stress in plants and can be evaluated using OJIP transients. In this study, we compared the ChlF features of plants exposed to HL (1200 μmol m-2 s-1) with that of control plants (300 μmol m-2 s-1). To extract the most reliable ChlF features for discrimination between HL-stressed and non-stressed plants, we applied three artificial neural network (ANN)-based algorithms, namely, Boruta, Support Vector Machine (SVM), and Recursive Feature Elimination (RFE). Feature selection algorithms identified multiple features but only two features, namely the maximal quantum yield of PSII photochemistry (FV/FM) and quantum yield of energy dissipation (ɸD0), remained consistent across all genotypes in control conditions, while exhibited variation in HL. Therefore, considered reliable features for HL stress screening. The selected features were then used for screening 14 tomato genotypes for HL. Genotypes were categorized into three groups, tolerant, semi-tolerant, and sensitive genotypes. Foliar hydrogen peroxide (H2O2) and malondialdehyde (MDA) contents were measured as independent proxies for benchmarking selected features. Tolerant genotypes were attributed with the lowest change in H2O2 and MDA contents, while the sensitive genotypes displayed the highest magnitude of increase in H2O2 and MDA by HL treatment compared to the control. Finally, a FV/FM higher than 0.77 and ɸD0 lower than 0.24 indicates a healthy electron transfer chain (ETC) when tomato plants are exposed to HL.

Plants exposed to titanium dioxide nanoparticles acquired contrasting photosynthetic and morphological strategies depending on the growing light intensity: a case study in radish

Due to the photocatalytic property of titanium dioxide (TiO₂), its application may be dependent on the growing light environment. In this study, radish plants were cultivated under four light intensities (75, 150, 300, and 600 μmol m^-2 s^-1 photosynthetic photon flux density, PPFD), and were weekly sprayed (three times in total) with TiO₂ nanoparticles at different concentrations (0, 50, and 100 μmol L^-1). Based on the obtained results, plants used two contrasting strategies depending on the growing PPFD. In the first strategy, as a result of exposure to high PPFD, plants limited their leaf area and send the biomass towards the underground parts to limit light-absorbing surface area, which was confirmed by thicker leaves (lower specific leaf area). TiO₂ further improved the allocation of biomass to the underground parts when plants were exposed to higher PPFDs. In the second strategy, plants dissipated the absorbed light energy into the heat (NPQ) to protect the photosynthetic apparatus from high energy input due to carbohydrate and carotenoid accumulation as a result of exposure to higher PPFDs or TiO₂ concentrations. TiO₂ nanoparticle application up-regulated photosynthetic functionality under low, while down-regulated it under high PPFD. The best light use efficiency was noted at 300 m^-2 s^-1 PPFD, while TiO₂ nanoparticle spray stimulated light use efficiency at 75 m^-2 s^-1 PPFD. In conclusion, TiO₂ nanoparticle spray promotes plant growth and productivity, and this response is magnified as cultivation light intensity becomes limited.

Growth, Biomass Partitioning, and Photosynthetic Performance of Chrysanthemum Cuttings in Response to Different Light Spectra

Chrysanthemum (Chrysanthemum morifolium) is among the most popular ornamental plants, propagated mainly through stem cuttings. There is a lack of information regarding the impact of the lighting environment on the successful production of cuttings and underlying mechanisms. The light spectrum affects plant morphology, growth, and photosynthesis. In the present study, chrysanthemum, cv. 'Katinka' cuttings, were exposed to five lighting spectra, including monochromatic red (R), blue (B) lights, and multichromatic lights, including a combination of R and B (R:B), a combination of R, B, and far red (R:B:FR) and white (W), for 30 days. B light enhanced areal growth, as indicated by a higher shoot mass ratio, while R light directed the biomass towards the underground parts of the cuttings. Monochromatic R and B lights promoted the emergence of new leaves. In contrast, individual leaf area was largest under multichromatic lights. Exposing the cuttings to R light led to the accumulation of carbohydrates in the leaves. Cuttings exposed to multichromatic lights showed higher chlorophyll content than monochromatic R- and B-exposed cuttings. Conversely, carotenoid and anthocyanin contents were the highest in monochromatic R- and B-exposed plants. B-exposed cuttings showed higher photosynthetic performance, exhibited by the highest performance index on the basis of light absorption, and maximal quantum yield of PSII efficiency. Although R light increased biomass toward roots, B light improved above-ground growth, photosynthetic functionality, and the visual performance of Chrysanthemum cuttings.

Diverse Physiological Roles of Flavonoids in Plant Environmental Stress Responses and Tolerance

Flavonoids are characterized as the low molecular weight polyphenolic compounds universally distributed in planta. They are a chemically varied group of secondary metabolites with a broad range of biological activity. The increasing amount of evidence has demonstrated the various physiological functions of flavonoids in stress response. In this paper, we provide a brief introduction to flavonoids' biochemistry and biosynthesis. Then, we review the recent findings on the alternation of flavonoid content under different stress conditions to come up with an overall picture of the mechanism of involvement of flavonoids in plants' response to various abiotic stresses. The participation of flavonoids in antioxidant systems, flavonoid-mediated response to different abiotic stresses, the involvement of flavonoids in stress signaling networks, and the physiological response of plants under stress conditions are discussed in this review. Moreover, molecular and genetic approaches to tailoring flavonoid biosynthesis and regulation under abiotic stress are addressed in this review.

Novel Approaches for Sustainable Horticultural Crop Production: Advances and Prospects

Reduction of plant growth, yield and quality due to diverse environmental constrains along with climate change significantly limit the sustainable production of horticultural crops. In this review, we highlight the prospective impacts that are positive challenges for the application of beneficial microbial endophytes, nanomaterials (NMs), exogenous phytohormones strigolactones (SLs) and new breeding techniques (CRISPR), as well as controlled environment horticulture (CEH) using artificial light in sustainable production of horticultural crops. The benefits of such applications are often evaluated by measuring their impact on the metabolic, morphological and biochemical parameters of a variety of cultures, which typically results in higher yields with efficient use of resources when applied in greenhouse or field conditions. Endophytic microbes that promote plant growth play a key role in the adapting of plants to habitat, thereby improving their yield and prolonging their protection from biotic and abiotic stresses. Focusing on quality control, we considered the effects of the applications of microbial endophytes, a novel class of phytohormones SLs, as well as NMs and CEH using artificial light on horticultural commodities. In addition, the genomic editing of plants using CRISPR, including its role in modulating gene expression/transcription factors in improving crop production and tolerance, was also reviewed.