The force of the myosin motor sets cooperativity in thin filament activation of skeletal muscles

Tropomodulin-Tropomyosin Interplay Modulates Interaction Between Cardiac Myosin and Thin Filaments

Tropomodulin (Tmod) is an actin-binding protein that interacts with tropomyosin and the actin filament at the pointed end. The influence of Tmod on the thin filament activation in the myocardium is not clear. We studied the interactions of Tmod1 and Tmod4 with the cardiac tropomyosin isoforms Tpm1.1 and Tpm1.2 using size-exclusion chromatography, a pull-down assay, and cross-linking with glutaraldehyde. We found that Tmod1 and Tmod4 form complexes with both Tpm1.1 and Tpm1.2, indicating durable interactions between these proteins. The effects of both Tmods on the actin-myosin interaction were studied using an in vitro motility assay. Tmod did not affect the sliding velocity of bare F-actin. Tmod1 slightly dose-dependently decreased the sliding velocity of F-actin-Tpm1.1 filaments and had no effect on the velocity of F-actin-Tpm1.2 filaments. With ventricular myosin, Tmod1 reduced the calcium sensitivity of the sliding velocity of thin filaments containing Tpm1.1 but did not affect it with filaments containing Tpm1.2. With atrial myosin, Tmod1 decreased the calcium sensitivity of the sliding velocities of thin filaments containing both Tpm1.1 and Tpm1.2. We can conclude that Tmod takes part in the regulation of actin-myosin interactions in the myocardium through interactions with Tpm. The effect of Tmod on the activation of thin filaments depends on the protein isoforms.

Dual-filament regulation of relaxation in mammalian fast skeletal muscle

Muscle contraction is driven by myosin motors from the thick filaments pulling on the actin-containing thin filaments of the sarcomere, and it is regulated by structural changes in both filaments. Thin filaments are activated by an increase in intracellular calcium concentration [Ca2+]i and by myosin binding to actin. Thick filaments are activated by direct sensing of the filament load. However, these mechanisms cannot explain muscle relaxation when [Ca2+]i decreases at high load and myosin motors are attached to actin. There is, therefore, a fundamental gap in our understanding of muscle relaxation, despite its importance for muscle function in vivo, for example, for rapid eye movements or, on slower timescales, for the efficient control of posture. Here, we used time-resolved small-angle X-ray diffraction (SAXD) to determine how muscle thin and thick filaments switch OFF in extensor digitorum longus (EDL) muscles of the mouse in response to decreases in either [Ca2+]i or muscle load and to describe the distribution of muscle sarcomere lengths (SLs) during relaxation. We show that reducing load at high [Ca2+]i is more effective in switching OFF both the thick and thin filaments than reducing [Ca2+]i at high load in normal relaxation. In the latter case, the thick filaments initially remain fully ON, although the number of myosin motors bound to actin decreases and the force per attached motor increases. That initial slow phase of relaxation is abruptly terminated by yielding of one population of sarcomeres, triggering a redistribution of SLs that leads to the rapid completion of mechanical relaxation.

High-pressure homogenization transformed salmon protein filament into micelle structure: Improvement on the stability and swallowing rheology of dysphagia-oriented salmon emulsion gels

The aging population is stimulating increased demand for dysphagia-oriented foods, yet most current options are made of ultra-processed macronutrients and lack high-quality protein and ω-3 fatty acids. This study explores the use of whole salmon fillets as a myofibrillar protein source to stabilize salmon backbone oil, creating ω-3-rich emulsion gels (50-60 vol%) for dysphasia individuals. Two-step high-pressure homogenization (HPH; 50 MPa) improved emulsion texture, storage stability, and swallowability (IDDSI level 4) by reducing oil droplet size (from 20 to 2 μm) and increasing elastic modulus by 6-8 times and viscosity by more than 10 times. These emulsion gels, rich in PUFAs, support cardiovascular health. HPH altered the structure of salmon myofibrillar proteins, transforming from micro-sized filament (2.5 μm) to assembled nano-sized micelle aggregate (400 nm) through reducing α-helix structure, crystallization, particle size, and aggregation. The protein interfacial stiffness and stability were improved, thus exhibiting greater oil droplet stabilization. The study offers a compelling reference for applying HPH in producing dysphagia-oriented products.

Modeling the effects of thin filament near-neighbor cooperative interactions in mammalian myocardium

The mechanisms underlying cooperative activation and inactivation of myocardial force extend from local, near-neighbor interactions involving troponin-tropomyosin regulatory units (RU) and crossbridges (XB) to more global interactions across the sarcomere. To better understand these mechanisms in the hearts of small and large mammals, we undertook a simplified mathematical approach to assess the contribution of three types of near-neighbor cooperative interactions, i.e., RU-induced, RU-activation (RU-RU), crossbridge-induced, crossbridge-binding (XB-XB), and XB-induced, RU-activation (XB-RU). We measured the Ca2+ and activation dependence of the rate constant of force redevelopment in murine- and porcine-permeabilized ventricular myocardium. Mathematical modeling of these three near-neighbor interactions yielded nonlinear expressions for the RU-RU and XB-RU rate coefficients (kon and koff) and XB-XB rate coefficients describing the attachment of force-generating crossbridges (f and f'). The derivation of single cooperative coefficient parameters (u = RU-RU, w = XB-RU, and v = XB-XB) permitted an initial assessment of the strength of each near-neighbor interaction. The parameter sets describing the effects of discrete XB-XB or XB-RU interactions failed to adequately fit the in vitro contractility data in either murine or porcine myocardium. However, the Ca2+ dependence of ktr in murine and porcine ventricular myocardium was well fit by parameter sets incorporating the RU-RU cooperative interaction. Our results indicate that a significantly stronger RU-RU interaction is present in porcine ventricular myocardium compared with murine ventricular myocardium and that the relative strength of the near-neighbor RU-RU interaction contributes to species-specific myocardial contractile dynamics in small and large mammals.

Mechanisms of myosin II force generation: insights from novel experimental techniques and approaches

Myosin II is a molecular motor that converts chemical energy derived from ATP hydrolysis into mechanical work. Myosin II isoforms are responsible for muscle contraction and a range of cell functions relying on the development of force and motion. When the motor attaches to actin, ATP is hydrolyzed and inorganic phosphate (Pi) and ADP are released from its active site. These reactions are coordinated with changes in the structure of myosin, promoting the so-called "power stroke" that causes the sliding of actin filaments. The general features of the myosin-actin interactions are well accepted, but there are critical issues that remain poorly understood, mostly due to technological limitations. In recent years, there has been a significant advance in structural, biochemical, and mechanical methods that have advanced the field considerably. New modeling approaches have also allowed researchers to understand actomyosin interactions at different levels of analysis. This paper reviews recent studies looking into the interaction between myosin II and actin filaments, which leads to power stroke and force generation. It reviews studies conducted with single myosin molecules, myosins working in filaments, muscle sarcomeres, myofibrils, and fibers. It also reviews the mathematical models that have been used to understand the mechanics of myosin II in approaches focusing on single molecules to ensembles. Finally, it includes brief sections on translational aspects, how changes in the myosin motor by mutations and/or posttranslational modifications may cause detrimental effects in diseases and aging, among other conditions, and how myosin II has become an emerging drug target.

An integrated picture of the structural pathways controlling the heart performance

The regulation of heart function is attributed to a dual filament mechanism: i) the Ca2+-dependent structural changes in the regulatory proteins of the thin, actin-containing filament making actin available for myosin motor attachment, and ii) the release of motors from their folded (OFF) state on the surface of the thick filament allowing them to attach and pull the actin filament. Thick filament mechanosensing is thought to control the number of motors switching ON in relation to the systolic performance, but its molecular basis is still controversial. Here, we use high spatial resolution X-ray diffraction data from electrically paced rat trabeculae and papillary muscles to provide a molecular explanation of the modulation of heart performance that calls for a revision of the mechanosensing hypothesis. We find that upon stimulation, titin-mediated structural changes in the thick filament switch motors ON throughout the filament within ~½ the maximum systolic force. These structural changes also drive Myosin Binding Protein-C (MyBP-C) to promote first motor attachments to actin from the central 1/3 of the half-thick filament. Progression of attachments toward the periphery of half-thick filament with increase in systolic force is carried on by near-neighbor cooperative thin filament activation by attached motors. The identification of the roles of MyBP-C, titin, thin and thick filaments in heart regulation enables their targeting for potential therapeutic interventions.

Force and kinetics of fast and slow muscle myosin determined with a synthetic sarcomere-like nanomachine

Myosin II is the muscle molecular motor that works in two bipolar arrays in each thick filament of the striated (skeletal and cardiac) muscle, converting the chemical energy into steady force and shortening by cyclic ATP-driven interactions with the nearby actin filaments. Different isoforms of the myosin motor in the skeletal muscles account for the different functional requirements of the slow muscles (primarily responsible for the posture) and fast muscles (responsible for voluntary movements). To clarify the molecular basis of the differences, here the isoform-dependent mechanokinetic parameters underpinning the force of slow and fast muscles are defined with a unidimensional synthetic nanomachine powered by pure myosin isoforms from either slow or fast rabbit skeletal muscle. Data fitting with a stochastic model provides a self-consistent estimate of all the mechanokinetic properties of the motor ensemble including the motor force, the fraction of actin-attached motors and the rate of transition through the attachment-detachment cycle. The achievements in this paper set the stage for any future study on the emergent mechanokinetic properties of an ensemble of myosin molecules either engineered or purified from mutant animal models or human biopsies.

Regulating Striated Muscle Contraction: Through Thick and Thin

Force generation in striated muscle is primarily controlled by structural changes in the actin-containing thin filaments triggered by an increase in intracellular calcium concentration. However, recent studies have elucidated a new class of regulatory mechanisms, based on the myosin-containing thick filament, that control the strength and speed of contraction by modulating the availability of myosin motors for the interaction with actin. This review summarizes the mechanisms of thin and thick filament activation that regulate the contractility of skeletal and cardiac muscle. A novel dual-filament paradigm of muscle regulation is emerging, in which the dynamics of force generation depends on the coordinated activation of thin and thick filaments. We highlight the interfilament signaling pathways based on titin and myosin-binding protein-C that couple thin and thick filament regulatory mechanisms. This dual-filament regulation mediates the length-dependent activation of cardiac muscle that underlies the control of the cardiac output in each heartbeat.

Sarcomere level mechanics of the fast skeletal muscle of the medaka fish larva

The medaka fish (Oryzias latipes) is a vertebrate model used in developmental biology and genetics. Here we explore its suitability as a model for investigating the molecular mechanisms of human myopathies caused by mutations in sarcomeric proteins. To this end, the relevant mechanical parameters of the intact skeletal muscle of wild-type medaka are determined using the transparent tail at larval stage 40. Tails were mounted at sarcomere length of 2.1 μm in a thermoregulated trough containing physiological solution. Tetanic contractions were elicited at physiological temperature (10°C-30°C) by electrical stimulation, and sarcomere length changes were recorded with nanometer-microsecond resolution during both isometric and isotonic contractions with a striation follower. The force output has been normalized for the actual fraction of the cross section of the tail occupied by the myofilament lattice, as established with transmission electron microscopy (TEM), and then for the actual density of myofilaments, as established with X-ray diffraction. Under these conditions, the mechanical performance of the contracting muscle of the wild-type larva can be defined at the level of the half-thick filament, where ∼300 myosin motors work in parallel as a collective motor, allowing a detailed comparison with the established performance of the skeletal muscle of different vertebrates. The results of this study point out that the medaka fish larva is a suitable model for the investigation of the genotype/phenotype correlations and therapeutic possibilities in skeletal muscle diseases caused by mutations in sarcomeric proteins.NEW & NOTEWORTHY The suitability of the medaka fish as a model for investigating the molecular mechanisms of human myopathies caused by mutations of sarcomeric proteins is tested by combining structural analysis and sarcomere-level mechanics of the skeletal muscle of the tail of medaka larva. The mechanical performance of the medaka muscle, scaled at the level of the myosin-containing thick filament, together with its reduced genome duplication makes this model unique for investigations of the genotype/phenotype correlations in human myopathies.

Optical Tweezers Apparatus Based on a Cost-Effective IR Laser-Hardware and Software Description

Optical tweezers (OT), or optical traps, are a device for manipulating microscopic objects through a focused laser beam. They are used in various fields of physical and biophysical chemistry to identify the interactions between individual molecules and measure single-molecule forces. In this work, we describe the development of a homemade optical tweezers device based on a cost-effective IR diode laser, the hardware, and, in particular, the software controlling it. It allows us to control the instrument, calibrate it, and record and process the measured data. It includes the user interface design, peripherals control, recording, A/D conversion of the detector signals, evaluation of the calibration constants, and visualization of the results. Particular stress is put on the signal filtration from noise, where several methods were tested. The calibration experiments indicate a good sensitivity of the instrument that is thus ready to be used for various single-molecule measurements.

Ca2+ and force during dynamic contractions in mouse intact skeletal muscle fibers

Muscle fiber force production is determined by the excitation frequency of motor nerves, which induce transient increases in cytoplasmic free Ca2+ concentration ([Ca2+]i) and the force-generating capacity of the actomyosin cross-bridges. Previous studies suggest that, in addition to altered cross-bridge properties, force changes during dynamic (concentric or eccentric) contraction might be affected by Ca2+-dependent components. Here we investigated this by measuring [Ca2+]i and force in mouse muscle fibers undergoing isometric, concentric, and eccentric contractions. Intact single muscle fibers were dissected from the flexor digitorum brevis muscle of mice. Fibers were electrically activated isometrically at 30-100 Hz and after reaching the isometric force plateau, they were actively shortened or stretched. We calculated the ratio (relative changes) in force and [Ca2+]i attained in submaximal (30 Hz) and near-maximal (100 Hz) contractions under isometric or dynamic conditions. Tetanic [Ca2+]i was similar during isometric, concentric and eccentric phases of contraction at given stimulation frequencies while the forces were clearly different depending on the contraction types. The 30/100 Hz force ratio was significantly lower in the concentric (44.1 ± 20.3%) than in the isometric (50.3 ± 20.4%) condition (p = 0.005), whereas this ratio did not differ between eccentric and isometric conditions (p = 0.186). We conclude that the larger force decrease by decreasing the stimulation frequency during concentric than during isometric contraction is caused by decreased myofibrillar Ca2+ sensitivity, not by the decreased [Ca2+]i.

Dependence of myosin filament structure on intracellular calcium concentration in skeletal muscle

Contraction of skeletal muscle is triggered by an increase in intracellular calcium concentration that relieves the structural block on actin-binding sites in resting muscle, potentially allowing myosin motors to bind and generate force. However, most myosin motors are not available for actin binding because they are stabilized in folded helical tracks on the surface of myosin-containing thick filaments. High-force contraction depends on the release of the folded motors, which can be triggered by stress in the thick filament backbone, but additional mechanisms may link the activation of the thick filaments to that of the thin filaments or to intracellular calcium concentration. Here, we used x-ray diffraction in combination with temperature-jump activation to determine the steady-state calcium dependence of thick filament structure and myosin motor conformation in near-physiological conditions. We found that x-ray signals associated with the perpendicular motors characteristic of isometric force generation had almost the same calcium sensitivity as force, but x-ray signals associated with perturbations in the folded myosin helix had a much higher calcium sensitivity. Moreover, a new population of myosin motors with a longer axial periodicity became prominent at low levels of calcium activation and may represent an intermediate regulatory state of the myosin motors in the physiological pathway of filament activation.

Activation of skeletal muscle is controlled by a dual-filament mechano-sensing mechanism

Contraction of skeletal muscle is triggered by a transient rise in intracellular calcium concentration leading to a structural change in the actin-containing thin filaments that allows binding of myosin motors from the thick filaments. Most myosin motors are unavailable for actin binding in resting muscle because they are folded back against the thick filament backbone. Release of the folded motors is triggered by thick filament stress, implying a positive feedback loop in the thick filaments. However, it was unclear how thin and thick filament activation mechanisms are coordinated, partly because most previous studies of the thin filament regulation were conducted at low temperatures where the thick filament mechanisms are inhibited. Here, we use probes on both troponin in the thin filaments and myosin in the thick filaments to monitor the activation states of both filaments in near-physiological conditions. We characterize those activation states both in the steady state, using conventional titrations with calcium buffers, and during activation on the physiological timescale, using calcium jumps produced by photolysis of caged calcium. The results reveal three activation states of the thin filament in the intact filament lattice of a muscle cell that are analogous to those proposed previously from studies on isolated proteins. We characterize the rates of the transitions between these states in relation to thick filament mechano-sensing and show how thin- and thick-filament-based mechanisms are coupled by two positive feedback loops that switch on both filaments to achieve rapid cooperative activation of skeletal muscle.

Muscle Mechanics and Thick Filament Activation: An Emerging Two-Way Interaction for the Vertebrate Striated Muscle Fine Regulation

Contraction in striated muscle is classically described as regulated by calcium-mediated structural changes in the actin-containing thin filaments, which release the binding sites for the interaction with myosin motors to produce force. In this view, myosin motors, arranged in the thick filaments, are basically always ready to interact with the thin filaments, which ultimately regulate the contraction. However, a new “dual-filament” activation paradigm is emerging, where both filaments must be activated to generate force. Growing evidence from the literature shows that the thick filament activation has a role on the striated muscle fine regulation, and its impairment is associated with severe pathologies. This review is focused on the proposed mechanical feedback that activates the inactive motors depending on the level of tension generated by the active ones, the so-called mechanosensing mechanism. Since the main muscle function is to generate mechanical work, the implications on muscle mechanics will be highlighted, showing: (i) how non-mechanical modulation of the thick filament activation influences the contraction, (ii) how the contraction influences the activation of the thick filament and (iii) how muscle, through the mechanical modulation of the thick filament activation, can regulate its own mechanics. This description highlights the crucial role of the emerging bi-directional feedback on muscle mechanical performance.