1
|
Tanaka R, Yamaguchi S, Takahashi Y, Imazato S, Hayashi M. Mechanical behavior of endodontically treated teeth: A three-dimensional finite element analysis using displacement vector. J Prosthodont 2023. [PMID: 38066718 DOI: 10.1111/jopr.13810] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2023] [Accepted: 12/03/2023] [Indexed: 01/13/2024] Open
Abstract
PURPOSE This study aimed to analyze the effects of core materials, remaining tooth structures, and interfacial bonding on stress distribution in endodontically treated teeth using finite element analysis (FEA). MATERIALS AND METHODS Three-dimensional FEA was conducted using a reverse engineering technique based on maxillary premolars scanned by micro-computed tomography. Six models were generated with or without ferrules and with one of the following three abutment systems: metal core, resin core, or resin core with fiber posts. In each model, bonding and debonding were assumed in the dentin and surrounding structures: bonded and debonded models. The maximum principal stress values were recorded, and stress distribution of the entire restored teeth and dentin was generated. Furthermore, the distribution of the displacement vector of the debonded models was generated. RESULTS In comparing the bonded and debonded models, the debonded models showed larger values for tensile stresses than those in bonded models for all abutment models. The models without ferrules rotated around the center of the abutment, whereas those with ferrules did not show remarkable displacement in the analysis. CONCLUSION FEA assuming fracture of adhesive interface proved to be an effective method to clarify the significance of ferrules. It prevents stress concentration in dentin by reducing the rotation of the abutment, even when the adhesive fails.
Collapse
Affiliation(s)
- Ryousuke Tanaka
- Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, Osaka, Japan
| | - Satoshi Yamaguchi
- Department of Dental Biomaterials, Osaka University Graduate School of Dentistry, Osaka, Japan
| | - Yusuke Takahashi
- Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, Osaka, Japan
| | - Satoshi Imazato
- Department of Dental Biomaterials, Osaka University Graduate School of Dentistry, Osaka, Japan
| | - Mikako Hayashi
- Department of Restorative Dentistry and Endodontology, Osaka University Graduate School of Dentistry, Osaka, Japan
| |
Collapse
|
2
|
Prawatvatchara W, Angkanawiriyarak S, Klaisiri A, Sriamporn T, Thamrongananskul N. Effect of Aprotic Solvents on the Microtensile Bond Strength of Composite Core and Fiber-Reinforced Composite Posts. Polymers (Basel) 2023; 15:3984. [PMID: 37836032 PMCID: PMC10574831 DOI: 10.3390/polym15193984] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2023] [Revised: 09/30/2023] [Accepted: 10/01/2023] [Indexed: 10/15/2023] Open
Abstract
This investigation evaluated the effects of aprotic solvents, i.e., tetrahydrofuran, pyridine, and morpholine, compared with hydrogen peroxide, on the surfaces of fiber-reinforced composite posts with a composite core based on the microtensile bond strength. In total, 150 FRC Postec Plus posts and 150 D.T. Light-Posts were randomly divided into three groups (non-thermocycling, 5000-cycle, and 10,000-cycle thermocycling groups). Each group was divided into five subgroups according to the post-surface treatment: C, non-treatment group; H2O2, immersed in 35% hydrogen peroxide; THF, immersed in tetrahydrofuran; PY, immersed in pyridine; and MP, immersed in morpholine. The treated specimens were placed in the bottom of a plastic cap and filled with a composite core material in preparation for the microtensile bond test. The data were evaluated using one-way ANOVA and Tukey's test (p < 0.05) as well as an independent t-test (p < 0.05). For the surface roughness, white light interferometry was used for measurement, and the mean surface roughness was analyzed via one-way ANOVA and Tukey's test (p < 0.05). The results showed that, under non-thermocycling conditions, the PY subgroup with D.T. Light-Post had the highest microtensile bond strength, followed by THF, MP, H2O2, and the control groups. For FRC Postec Plus, the PY group had the highest microtensile bond strength, followed by MP, THF, H2O2, and the control groups. Although the thermocycling conditions decreased the microtensile bond strength in all groups, the PY subgroup still had the highest value. An independent t-test revealed that even under all non-thermocycling and 5000- and 10,000-cycle thermocycling conditions, D.T. Light-Post in the PY subgroup displayed significantly higher microtensile bond strengths than FRC Postec Plus in the PY subgroup. While the surface roughness of the fiber-reinforced composite posts showed that the posts treated with pyridine possessed the highest surface roughness for each material type, In conclusion, as an aprotic solvent, pyridine generates the highest microtensile bond strength between the interfaces of composite cores and fiber-reinforced composite posts.
Collapse
Affiliation(s)
- Wisarut Prawatvatchara
- Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn University, Bangkok 10330, Thailand
| | | | - Awiruth Klaisiri
- Division of Restorative Dentistry, Faculty of Dentistry, Thammasat University, Pathumthani 12120, Thailand;
| | - Tool Sriamporn
- Division of Prosthodontics, College of Dental Medicine, Rangsit University, Pathumthani 12000, Thailand;
| | - Niyom Thamrongananskul
- Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn University, Bangkok 10330, Thailand
| |
Collapse
|
3
|
Elter B, Diker B, Tak Ö. The trueness of an intraoral scanner in scanning different post space depths. J Dent 2022; 127:104352. [PMID: 36334784 DOI: 10.1016/j.jdent.2022.104352] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2022] [Revised: 10/10/2022] [Accepted: 10/27/2022] [Indexed: 11/06/2022] Open
Abstract
OBJECTIVES The purpose of this in vitro study was to evaluate the trueness of scanning the post space up to 20 mm with an intraoral scanner (IOS). METHODS We captured 20-, 18-, 16-, 14-, 12-, and 10-mm length post space scans using an IOS (Primescan) eight times each by shortening the apical 2 mm end of the same mandibular canine tooth. The reference impressions of each length group were taken using a light-body polyvinyl siloxane impression material and were scanned with an extraoral scanner. The recorded standard tessellation language (STL) data of all impressions were uploaded to a 3D matching program for the trueness evaluation via the root mean square (RMS) calculation. For the statistical analysis, the Kruskal-Wallis and post-hoc Mann-Whitney U nonparametric tests were performed to compare the differences among the groups (α=0.05). RESULTS The median RMS values increased in direct proportion to the length of the post space from 10 mm (357.1 µm) to 20 mm (897.5 µm). We noted a significant difference among groups (p< 0.001). In the pairwise comparisons, there were no significant differences between the 14 mm and 16 mm groups (p=0.431) or between the 18 mm and 20 mm groups (p=0.036), while other paired groups showed significant differences (p=0.001). CONCLUSIONS The scanned space depth affected the trueness of the IOS (Primescan). If the post depth was below 14 mm, and the minimum diameter was 2.2 mm, Primescan could be used for impressions of the post-core structure, simplifying the impression procedure. CLINICAL SIGNIFICANCE IOS seems to be a promising technology for taking digital impressions of post spaces, but cannot be recommended as a routine procedure at its present stage, as final results are highly dependent on the clinical situation. Further studies with different IOS systems are needed to gain sound evidence.
Collapse
Affiliation(s)
- Bahar Elter
- Baskent University Istanbul Hospital, Uskudar, Istanbul, Turkey.
| | - Burcu Diker
- Faculty of Dentistry, Bezmialem Vakıf University, Topkapı, Istanbul, Turkey
| | - Önjen Tak
- Faculty of Dentistry, Department of Prosthodontics, Istinye University, Topkapı, Istanbul, Turkey
| |
Collapse
|
4
|
Mora P, Nunwong C, Sriromreun P, Kaewsriprom P, Srisorrachatr U, Rimdusit S, Jubsilp C. High Performance Composites Based on Highly Filled Glass Fiber-Reinforced Polybenzoxazine for Post Application. Polymers (Basel) 2022; 14:4321. [PMID: 36297897 PMCID: PMC9607604 DOI: 10.3390/polym14204321] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2022] [Revised: 10/07/2022] [Accepted: 10/11/2022] [Indexed: 06/16/2023] Open
Abstract
Glass fiber post based on the new polymeric material, polybenzoxazine, is prepared and the effects of glass fiber contents on mechanical and thermal properties are evaluated. The mechanical response to externally applied loads of tooth restored with glass fiber-reinforced polybenzoxazine composite posts is also simulated by finite element analysis of a tridimensional model and compared with the response to that of a natural tooth. The reinforcing of glass fiber can help improve the mechanical and thermal properties of the polybenzoxazine influenced by the interfacial adhesion between the glass fiber and polybenzoxazine matrix, except for the relatively high mechanical property of the glass fiber. The mechanical data, i.e., elastic modulus under flexure load or flexural modulus by three-point bending test of the glass fiber-reinforced polybenzoxazine composites are agreed with the elastic modulus of dentin and then used in the finite element model. The restoration using the glass fiber-reinforced polybenzoxazine composite post provided the maximum von Mises equivalent stress at the cervical third area of the endodontically treated tooth model as similarly observed in the natural tooth. In addition, the maximum von Mises equivalent stress of the tooth restored with the glass fiber-reinforced polybenzoxazine composite post is also quietly like that of the natural tooth. The finding of this work provided the essential properties of the glass fiber-reinforced polybenzoxazine composite for dental restorations and appliances.
Collapse
Affiliation(s)
- Phattarin Mora
- Department of Chemical Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand
| | - Chananya Nunwong
- Department of Chemical Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand
- Research Unit in Polymeric Materials for Medical Practice Devices, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330, Thailand
| | - Parkpoom Sriromreun
- Department of Mechanical Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand
| | - Preecha Kaewsriprom
- Excellent Center for Sustainable Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand
| | - Ukrit Srisorrachatr
- Institute of Dentistry, Department of Medical Services, Nonthaburi 11000, Thailand
| | - Sarawut Rimdusit
- Research Unit in Polymeric Materials for Medical Practice Devices, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330, Thailand
| | - Chanchira Jubsilp
- Department of Chemical Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhonnayok 26120, Thailand
| |
Collapse
|
5
|
Zhabuawala M, Alirajpurwala T, Nadig R. Corono-radicular reinforcement with minimal invasion: A novel case report. J Conserv Dent 2022; 25:101-104. [PMID: 35722063 PMCID: PMC9200174 DOI: 10.4103/jcd.jcd_463_21] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2021] [Revised: 11/30/2021] [Accepted: 12/21/2021] [Indexed: 11/23/2022] Open
Abstract
Maxillary premolar with an oval-shaped canal always poses a challenge while reconstruction using the post and core system. Fiber-post has many advantages over metallic-post and so fiber-post is becoming more popular and particularly widely used than metallic-post nowadays. Fiber-post has benefits of esthetic and strength, and its combination with flexible material, Ribbond has provided it with a high rise in the field of dentistry. The purpose of this case report was to show an innovative technique to place both glass fiber-post and Ribbond as a single assembly into the canal which gives a monoblock effect. This technique is feasible and may eradicate some of the problems associated with the cementation of ill-fitted fiber-post in an oval-shaped canal with widened canal space.
Collapse
|
6
|
Eren B, Ozasir T, Kandemir B, Gulsahi K. Comparison of Fracture Resistance of Endodontically Treated Teeth Restored with FiberSite Postsystem and Glass Fiber, Combined with Different Root Canal Sealers. Biomed Res Int 2021; 2021:3818652. [PMID: 34725637 DOI: 10.1155/2021/3818652] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Received: 06/29/2021] [Revised: 09/25/2021] [Accepted: 10/16/2021] [Indexed: 11/18/2022]
Abstract
This study is aimed at evaluating the effects of FiberSite and glass fiber postsystems on the fracture resistance of endodontically restored teeth, when combined with various root canal sealers. Forty human mandibular premolar teeth, each having a single root with anatomically comparable dimension and length, were selected. The teeth in each experimental group (n = 10) were instrumented, obturated, and restored with the following procedures: in group 1, AH Plus root canal sealer and a glass fiber post with a composite core; in group 2, AH Plus root canal sealer and a FiberSite postsystem; in group 3, Sure-Seal Root canal sealer and a glass fiber post with a composite core; and in group 4, Sure-Seal Root canal sealer and a FiberSite postsystem. The specimens were placed on a universal test machine. The fracture resistance of all specimens was tested using generic test equipment, and the value of the force in newton (N) during fracture was measured for each root. A statistical analysis was conducted through the Kruskal–Wallis test as well as the post hoc test. The tests showed a significant difference between groups 2 and 3, with group 3 producing load values that were significantly higher than group 2. In contrast, no significant differences were found to exist between the other groups. Regardless of postsystems, groups 3 and 4 showed higher mean fracture values (but no statistically significant differences) than groups 1 and 2.
Collapse
|
7
|
Alhajj MN, Qi CH, Sayed ME, Johari Y, Ariffin Z. Fracture Resistance of Titanium and Fiber Dental Posts: A Systematic Review and Meta-Analysis. J Prosthodont 2021; 31:374-384. [PMID: 34499376 DOI: 10.1111/jopr.13428] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 09/03/2021] [Indexed: 11/26/2022] Open
Abstract
PURPOSE The fracture resistance of dental post systems is influenced by the material of the post. The purpose of this systematic review and meta-analysis was to assess if there is a difference in fracture resistance between prefabricated dental titanium posts and fiber posts. METHODS An online electronic search was performed using the PubMed, Scopus, and Web of Science databases for in vitro studies published from 2010 to 2020 in English. The retrieved eligible studies that compared the fracture resistance of titanium and fiber posts on human teeth were selected. The pooled standardized mean difference (SMD) with a 95% confidence interval was calculated. In addition, the trial sequential analysis (TSA) was performed to test if the available studies are sufficient to make conclusive evidence. RESULTS Of the 1165 retrieved studies, 17 studies were included in the qualitative analysis, while 16 studies were included in the quantitative analysis. Because of the high heterogeneity among studies, data from 10 studies were pooled and submitted to TSA. A total of 852 teeth were evaluated for fracture of the posts in 27 independent comparison groups. The pooled effect of the residual studies revealed no significant difference between titanium and fiber posts (SMD = -0.12; 95% CI = -0.30, 0.06; p = 0.20). Results of the TSA revealed no conclusive evidence. CONCLUSIONS The results of the current evidence revealed no significant difference between fiber and titanium posts. The evidence is insufficient, and more standardized in vitro studies are required.
Collapse
Affiliation(s)
- Mohammed Nasser Alhajj
- Prosthodontics Unit, School of Dental Sciences, Health Campus, Universiti Sains Malaysia, Kelantan, Malaysia.,Department of Prosthodontics, Faculty of Dentistry, Thamar University, Dhamar, Yemen
| | - Chong Hui Qi
- Prosthodontics Unit, School of Dental Sciences, Health Campus, Universiti Sains Malaysia, Kelantan, Malaysia
| | - Mohammed E Sayed
- Department of Prosthetic Dental Sciences, College of Dentistry, Jazan University, Jazan, Saudi Arabia
| | - Yanti Johari
- Prosthodontics Unit, School of Dental Sciences, Health Campus, Universiti Sains Malaysia, Kelantan, Malaysia
| | - Zaihan Ariffin
- Prosthodontics Unit, School of Dental Sciences, Health Campus, Universiti Sains Malaysia, Kelantan, Malaysia
| |
Collapse
|
8
|
Abstract
The objective of this study was to determine the long-term water sorption, solubility and hygroscopic expansion of resin composites with and without incorporated short fibers. Three resin composites incorporating fibers were examined: everX Posterior (EVX), NovoPro Universal (NPU) and NovoPro Flow (NPF). Four Particulate filled composites were used as controls: Filtek bulk Fill (FBF), Filtek one bulkfill (FBO), Filtek Supreme XTE (XTE), and Filtek Supreme Flow (XTEF). For sorption and solubility measurements, specimens were immersed in water for140 days, weighed at intervals, then dried for a further 42 days at 37±1°C. Laser micrometer measured diametral expansion. XTEF exhibited the highest sorption. The solubility range was between -1.4 to 4.1 μg/mm; XTEF had the highest solubility, with EVX demonstrating negative solubility. Hygroscopic expansion ranged between 1.4% for hydroxyapatite fiber reinforced composite (NPU) and 2.2% for E-glass fiber reinforced composite (EVX). A nano-fiber containing composite (NPU) had the most favorable outcomes compared to a range of composites.
Collapse
Affiliation(s)
- Abdulrahman Alshabib
- Dentistry, School of Medical Sciences, University of Manchester.,Department of Restorative Dentistry, College of Dentistry, King Saud University
| | - Hamad Algamaiah
- Dentistry, School of Medical Sciences, University of Manchester.,Department of Restorative Dentistry, College of Dentistry, King Saud University
| | | | - David C Watts
- Dentistry, School of Medical Sciences, University of Manchester.,Photon Science Institute, University of Manchester
| |
Collapse
|
9
|
Tan AY, Poon L, Ng ELM, Monsour P, El Masoud BM, Moule A, Bogen G. Cone beam computed tomography analysis of residual dentin thickness after virtual post placement in the palatal roots of maxillary first molars. J Prosthet Dent 2021; 128:702-708. [PMID: 33714551 DOI: 10.1016/j.prosdent.2020.12.005] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/24/2019] [Revised: 11/25/2020] [Accepted: 12/01/2020] [Indexed: 10/21/2022]
Abstract
STATEMENT OF PROBLEM In endodontically treated maxillary first molars, post space preparations in the palatal roots can compromise the residual dentin thickness (RDT) and increase the risk of perforations or root fractures. This can be attributed to the direction of the buccopalatal curvature that cannot be viewed with conventional 2D imaging. PURPOSE The purpose of this clinical study was to investigate the RDT of palatal roots following the placement of digital post analogs of different diameters positioned at various distances from the radiographic apex by using cone beam computed tomography (CBCT). MATERIAL AND METHODS A total of 122 deidentified CBCT data sets containing both maxillary permanent first molars were randomly selected from a private radiology practice. Digital parallel-sided post analogs were superimposed onto the CBCT coronal images at distances of 3 mm, 4 mm, and 5 mm from the radiographic apex and at a depth equal to the height of the anatomic crown (1:1 crown/post ratio). Post analogs of 0.9 mm, 1.0 mm, and 1.14 mm in diameter were matched with safety zone analogs representing 1 mm of circumferential RDT. The minimum RDT for each analog was determined and grouped into 3 categories: RDT≤0 mm, 0 mm<RDT<1 mm, and RDT≥1 mm. The statistical significance between post diameters and post depth was analyzed with the Friedman test and Conover post hoc test (α=.05). RESULTS Significant differences in RDT were found at all tested depths and diameters of post analogs (P<.001). Generally, the amount of RDT increased as the post length was reduced. Most teeth (>50.0%) had inadequate or no RDT. The depth of the post (P<.001) had a greater impact on RDT than the post diameter (P>.017). No similarities were found in the RDT between contralateral molars in 86.9% of the images. CONCLUSIONS The risk of insufficient RDT (<1 mm) after the placement of parallel-sided posts in the palatal roots of maxillary first molars is minimized if the post is inserted to a depth equaling the height of the crown compared with 3, 4, and 5 mm from the radiographic apex. The RDT of the palatal root of a maxillary first molar is not a reliable predictor of the contralateral palatal root RDT in the same patient.
Collapse
Affiliation(s)
- An Yan Tan
- Honors student, School of Dentistry, University of Queensland, Brisbane, Australia
| | - Lawrence Poon
- Honors student, School of Dentistry, University of Queensland, Brisbane, Australia
| | - Ee Lin Michelle Ng
- Honors student, School of Dentistry, University of Queensland, Brisbane, Australia
| | - Paul Monsour
- Discipline Lead, Emeritus Professor of Dento-Maxillofacial Radiology, Faculty of Health and Behavioural Sciences, School of Dentistry, University of Queensland, Brisbane, Australia
| | - Bilal Mohammed El Masoud
- Senior Lecturer, Discipline of Prosthodontics, Faculty of Health and Behavioural Sciences School of Dentistry, University of Queensland, Brisbane, Australia
| | - Alex Moule
- Discipline lead, Honorary Professor of Endodontics, Faculty of Health and Behavioural Science, School of Dentistry, University of Queensland, Brisbane, Australia
| | - George Bogen
- Senior Lecturer, Discipline of Endodontics, Faculty of Health and Behavioural Sciences, School of Dentistry, University of Queensland, Brisbane, Australia.
| |
Collapse
|
10
|
Ulusoy N, Gulec Alagoz L. Evaluation of two CAD/CAM materials for Nayyar core and post-retained restorations: Three dimensional stress analysis. J Mech Behav Biomed Mater 2021; 117:104381. [PMID: 33582503 DOI: 10.1016/j.jmbbm.2021.104381] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2020] [Revised: 01/27/2021] [Accepted: 01/31/2021] [Indexed: 11/21/2022]
Abstract
OBJECTIVES The aim of this study is to assess the stress distribution of a nanoceramic resin CAD/CAM material, Lava Ultimate (LU) and a polymer-infiltrated hybrid ceramic CAD/CAM material, Vita Enamic (VE) for enamel replacement for Nayyar core (corono-radicular dowel and core) or post-retained restoration designs of a maxillary first premolar tooth with missing palatal cusp. MATERIALS AND METHODS A three dimensional finite element (FE) modelof maxillary first premolar with two roots was modeled. A mesial-occlusal-distal-palatal (MODP) cavity was designed with cavity floor above cemento-enamel junction and including buccal cuspal reduction. Restoration designs consisted of Nayyar core restoration (NCR) and post-retained restoration (PRR) with a glass fiber post. Vita Enamic (VE), Lava Ultimate (LU) were used for enamel and everX Posterior was used for dentin replacement. Vertical occlusal load (100 N) was applied on a spherical solid rigid material simulating the food stuff. Von Mises (VM) and maximum principle stress values were evaluated separately for the remaining enamel, remaining dentin and restorative material in megapascal (MPa). RESULTS The analysis of both VM and maximum principle stress values revealed that the most intense stress accumulation was in the cervical region of enamel for both designs. For VM, similar stress values were observed only in dentin. Stress analysis of restorative materials showed that everX Posterior had the highest stress accumulation. CONCLUSIONS The comparison of the two techniques showed that PRR had better stress distribution than NCR. NCR or PRR with LU or VE exhibited similar VM stress accumulation in dentin. Maximum principle stress analyses showed that PRR with LU transmitted the least stress to enamel and dentin indicating that when LU is the material of choice, post-retained restoration would be a satisfactory design. VM stress values of enamel revealed that VE absorbed the stress in itself and transferred less stress to dentin. This could point out that for the restoration of maxillary first premolar tooth with missing palatal cusp, VE may be a suitable material for NCR and PRR restoration techniques. HIGHLIGHTS When fiber reinforced composite is used as dentin replacement in combination with VE as enamel replacement; any technique; PRR or NCR, may be preferred in the restoration of MODP cavities of endodontically treated maxillary premolars. The clinical relevance has to be further studied in-vivo.
Collapse
|
11
|
Davoudi A, Shadmehr E, Savoj M, Akhavan-Khaleghi M, Tabesh M, Zakizade M, Ebadian B. Laser Treatment of Fiber Post and Final Push-Out Bond Strength: A Systematic Review and Meta-Analysis. Photobiomodul Photomed Laser Surg 2020; 39:321-333. [PMID: 33275497 DOI: 10.1089/photob.2020.4809] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Abstract
Purpose: This review article tries to answer this question: "What are the effects of laser surface treatment of fiber posts (FPs), compared with other surface roughening methods, on bond strength of cemented FPs?" Methods: Search was carried out in six electronic databases by focusing on defined key words. Related titles and abstracts, up to March 2019, were collected, read, and selected for quality assessments. A total of 2408 articles were included in the study at the initial stage of the searching phase. Results: Finally, seven studies were recognized to be reliable to be reviewed and meta data analysis in the study. All the studies were in vitro with a total of 340 samples. None of the Er:YAG (-0.27, 95% CI: -2.29 to 1.76; p = 0.79) and Er,Cr:YSGG (-0.04, 95% CI: -1.43 to 1.35; p = 0.95) treated samples showed any significant overall mean differences in final push-out bond strength (PBS) compared with the control groups. Conclusions: Laser pretreatment of FP surfaces might not be effective in providing high PBS. FP surface are susceptible to damage of high-level laser irradiation and might show decreased bond strength.
Collapse
Affiliation(s)
- Amin Davoudi
- Department of Prosthodontics, Dental Implants Research Center, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Elham Shadmehr
- Department of Endodontics, School of Dentistry, UCSF Preventive & Restorative Dental Science, San Francisco, California, USA
| | - Melika Savoj
- Dental Research Center, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Mehrdad Akhavan-Khaleghi
- Department of Prosthodontics, Dental Implants Research Center, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Mahtab Tabesh
- Dental Research Center, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Mehrnaz Zakizade
- Department of Orthodontics, Dental School, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Behnaz Ebadian
- Department of Prosthodontics, Dental Implants Research Center, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
| |
Collapse
|
12
|
Coelho BS, Tomazinho FSF, Leonardi DP, Scaini F, Gabardo MCL, Lara RMD, Baratto-Filho F. Effects of 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide on Adhesion of Posts in Teeth Obturated With Different Sealers. Braz Dent J 2020; 31:417-422. [DOI: 10.1590/0103-6440202002897] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/24/2019] [Accepted: 02/10/2020] [Indexed: 11/21/2022] Open
Abstract
Abstract The aim of this study was to evaluate the effect of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) on bond strength of fiberglass posts in root canals obturated with different endodontic sealers. Seventy-eight mandibular premolars were obturated with three sealers (n=26): Endofill (END), AH Plus (AHP), and Endosequence BC Sealer (EBS). After preparation of the post space, two subgroups were formed according to the cementation of the posts (n=13): with EDC (EDC), and without EDC (control - CON). The specimens were submitted to a pull-out test, failure mode classification, and root canal surface evaluation by scanning electron microscopy after post displacement. Regarding the bond strength, a significant difference between the EDC and CON subgroups occurred only in the END (p=0.001). No difference was detected among the CON subgroups (p=0.339). However, among the EDC subgroups, AHP presented significantly higher values (END versus AHP: p=0.001; AHP versus EBS: p=0.016). Upon classification of failure modes, score 1 (≥ 50% of cement) was the most commonly observed, except for the END + EDC. Remains of endodontic sealers and resin cements were found in the cervical third, but without statistical difference (p=0.269), while in the middle third, difference occurred (p=0.004). In conclusion, EDC decreases bond strength when associated with END sealer, without changing the failure mode between the resin cement and fiberglass post. The best performance was observed when EDC was combined with AHP sealer.
Collapse
|
13
|
Abstract
Background:
There is an increased interest in investigating and use of prefabricated fiber-reinforced posts by scientists and clinicians in the restoration of endodontically treated teeth.
Objective:
The objective of this narrative review was to summarize the composition of contemporary prefabricated fiber-reinforced posts and elucidate its effect on the different properties of these posts.
Methods:
PubMed/Medline, Scopus, and Google Scholar were searched from January 1990 to December 2019 for English Language articles describing the composition and properties of prefabricated fiber-reinforced posts. First, the search strategy was established for Medline / PubMed using the following terms ((Fiber post[All Fields] OR (fiber reinforced post[All Fields] AND composition[All Fields] AND (“matrix”[MeSH Terms] OR (“fiber”[All Fields] AND “properties”[All Fields] AND “epoxy”[All Fields]) OR “dimethacrylate”[All Fields]) AND NOT (CAD CAM[All Fields])). The search strategy was then adapted for Scopus and Google Scholar databases to identify eligible studies.
Results:
The current state of the art of prefabricated fiber-reinforced posts revealed a myriad of products with different formulations which are reflected on the mechanical and handling characteristics of the different posts available in the market. More recent research and development efforts attempted to address issues related to the improved transmission of polymerization light through the post to the most apical end of the restoration inside the root canal. Others focused on the development of new matrix materials for fiber-reinforced posts.
Conclusion:
A review of the literature revealed that currently available prefabricated fiber-reinforced posts consist of a heterogeneous group of materials which can have a significant effect on the behavior of posts. Understanding different formulations will help clinicians in scrutinizing the vast literature available on prefabricated fiber-reinforced posts. This, in turn, will help them make an informed decision when selecting materials for the restoration of endodontically treated teeth.
Collapse
|
14
|
Alkhatri R, Saleh ARM, Kheder W. Evaluating Fracture Resistance And Failure Modes Of Root Filled Teeth Restored With CAD/CAM-Fabricated Post And Core. Clin Cosmet Investig Dent 2019; 11:349-355. [PMID: 31814773 PMCID: PMC6863363 DOI: 10.2147/ccide.s219712] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2019] [Accepted: 09/26/2019] [Indexed: 11/23/2022] Open
Abstract
Objective The aim of this study was to measure the fracture resistance and failure modes of root-filled teeth restored with three different computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated post and core assemblies. Methods Thirty extracted intact maxillary central incisors were used in the study, and the teeth were endodontically treated and sectioned to a root length of 16 mm. The samples were divided into three groups (n = 10) according to the mean of the dimensions at the cervical portion of the root. The posts and cores were fabricated with CAD/CAM technology using metal, zirconia, and polymer-infiltrated ceramic network (PICN) material. The posts were luted using resin cement, and then, metal crowns were fabricated, cemented, and then subjected to a compression to determine the fracture resistance force. Fracture of the post and core or fracture of the root above the level of the acrylic resin was considered as a favorable fracture, while nonfavorable fractures were those where the root fracture occurred below the level of the acrylic resin. Statistical analysis was carried out using SPSS software, and one-way analysis of variance was used to analyze root fracture resistance in Newton. The number of failure modes, post–core fractures and/or root fractures was calculated. The differences between study groups were revealed using the chi-square test. Results The results of ANOVA revealed a nonsignificant difference in the resistance to fracture among the study groups (P = 0.114). The failure modes were nonfavorable for all metal and zirconia samples and seven PICN samples. However, three PICN samples exhibited a favorable represented by core fracture without root fracture. Conclusion There was no significant difference between metal and zirconia samples in terms of nonfavorable fracture, while few PICN samples exhibited a favorable fracture. PICN material can be used in the fabrication of post and core assemblies using CAD/CAM.
Collapse
Affiliation(s)
- Reem Alkhatri
- Department of Restorative Dentistry, Ajman University, Ajman, United Arab Emirates
| | | | - Waad Kheder
- College of Dental Medicine, University of Sharjah, Sharjah, United Arab Emirates
| |
Collapse
|
15
|
Chisnoiu A, Picos A, Lascu L, Negucioiu M, Chisnoiu R, Kui A. Dentists' perspectives on the reconstruction possibilities of a non-vital tooth. Med Pharm Rep 2019; 92:387-392. [PMID: 31750440 PMCID: PMC6853044 DOI: 10.15386/mpr-1148] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2018] [Revised: 05/17/2019] [Accepted: 06/09/2019] [Indexed: 11/23/2022] Open
Abstract
Background and aims The decision-making process when restoring a non-vital tooth is influenced by multiple factors. This study aimed to survey the dentists’ preferences regarding cast post-and-core and fiber post techniques for the reconstruction of non-vital teeth and to identify a correlation between reconstruction technique and practitioners characteristics, or dental characteristics. Methods The survey instrument was a questionnaire, which included a general part with questions regarding the practitioner’s profile (gender, age, years of experience, pattern and location of practice, etc.) and the dental characteristics (anterior or posterior position of the tooth on the arch, the amount of dental remaining tissues, etc.) and a technical part, containing more specific questions regarding the manufacture and performance of root-coronal reconstructions. Results Among the surveyed practitioners (n=35), 69.7% use more often cast post-and-core reconstructions (CPR) while 30.3% choose fiber post reconstructions (FPR). No difference in the reconstruction type was observed regarding patient’s age (p=0.23) or gender (p=0.092). The para-function criterion was considered important by 8.23% of the participants. When deciding the type of the root-coronal reconstruction depending on the remaining dentine walls, CPRs are significantly more frequently used in posterior areas (p=0.043) or when para-functional habits exist (p=0.022). Conclusion Cast post-and-core represent the most frequently used type of reconstruction for non-vital teeth. Fiber post reconstructions are indicated in the aesthetic zone and when the amount of healthy remaining dental structure is higher.
Collapse
Affiliation(s)
- Andrea Chisnoiu
- Department of Prosthodontics, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
| | - Alina Picos
- Department of Prosthodontics, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
| | - Liana Lascu
- Department of Prosthodontics, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
| | - Marius Negucioiu
- Department of Prosthodontics, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
| | - Radu Chisnoiu
- Department of Odontology, Endodontics and Oral Pathology, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
| | - Andreea Kui
- Department of Prosthodontics, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
| |
Collapse
|
16
|
Jum'ah AA, Creanor S, Wilson NHF, Burke FJT, Brunton PA. Dental practice in the UK in 2015/2016. Part 3: aspects of indirect restorations and fixed prosthodontics. Br Dent J 2019; 226:192-6. [PMID: 30734749 DOI: 10.1038/sj.bdj.2019.95] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 06/15/2018] [Indexed: 11/08/2022]
Abstract
Objective This paper reports data which helps identify changes and trends in the provision of indirect fixed prostheses in general dental practice in the UK. To determine by means of an anonymous, self-report questionnaire, the current trend in the provision of fixed prosthodontic treatments, with a special emphasis on the choice of treatment modalities, techniques and materials. Methods The data presented were extracted from the data obtained from a validated,121-question questionnaire distributed at random to general dental practitioners in the UK attending postgraduate meetings in 2015/2016, with a wide distribution of locations. Results A response rate exceeding 66% was achieved. Amalgam and light-cured composite were the preferred material for core build-up of vital teeth for around 62% of the respondents. Dentine pins were still being used by 66% of the respondents. The vast majority of respondents (92%) used a post and core to restore root-treated teeth. Fibre posts were the most commonly used (63%) type of preformed post among the respondents. Using the opposing and adjacent teeth as a reference to control tooth structure reduction during vital tooth preparation was the most common method, used by 42% of the respondents. Addition-cured silicone impression materials were the most frequently used impression material (78%). The surveyed practitioners were equally split between precious and non-precious metals as the substructure for indirect restorations. Glass-ionomer luting cements (47%) and resin-based cements (52%) were the most commonly used to cement porcelain fused to metal and zirconia indirect restorations, respectively. Laboratory made aesthetic veneers were prescribed by half of the respondents, while a third of them preferred direct resin composite as a veneer material. Conclusion Within the limitations of the study, it was concluded that there has been an increase in the use of adhesive bonding and metal-free restorations. Amalgam and dentine pinscontinued to be used, contrary to international trends. Studies of the type reported are considered important in investigating trends and developments in dentistry.
Collapse
|
17
|
Bovolato L, Tonini R, Boschi G, Cavalli G, Salgarello SA. Novel hollow fiber sandwich composite post system: mechanical characteristics. Minerva Stomatol 2019; 69:63-71. [PMID: 31633317 DOI: 10.23736/s0026-4970.19.04235-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
BACKGROUND There is currently no consensus on the optimal post system to provide effective long-term results. We used an engineering approach to investigate the mechanical properties of a sandwich hollow carbon fiber post in synergy with a new bonding technique. METHODS We studied two systems - a sandwich fiber hollow post (Techole®, Isasan, Como, Italy) composed of carbon fiber incorporated in a Dpp-MOR resin mix and a traditional non-hollow post (Tech 2000®, Isasan, Como, Italy). A bi-component composite (Clearfil Core®, Kuraray, New York, NY, USA) (2.2 gcm3, 12.3 GPa) and a dual cure composite with lower density and modulus of elasticity (Clearfil DC Core®, Kuraray, New York, NY, USA) (2.0 gcm3, 10.0 GPa) were also used into hollow posts. Results from three-point bending test (N.=81), compression test (N.=78) and cut test (N.=81) were achieved. RESULTS In the three-point bending test there were significant differences in flexibility/bending when sandwich fiber hollow posts were filled with composite of different modulus of elasticity. Hollow sandwich posts showed also significant (P=0.000) better resistance to compression and cutting than solid posts, independently of the type of composite. Moreover, hollow posts filled plus composite with a modulus of elasticity of 12.3 GPa showed significant (P=0.000) improved resistance parameters rather than hollow posts filled with a composite of 10.0 GPa. CONCLUSIONS The study confirms the favorable mechanical properties of the hollow sandwich fiber post system (Techole®) and the synergistic efficacy when used in combination with the composite Clearfil DC Core® (10.0 GPa) and, especially, Clearfil Core® (12.3 GPa).
Collapse
Affiliation(s)
- Luca Bovolato
- Department of Medical and Surgery Specialties, Radiological Sciences and Public Health, School of Dentistry, University of Brescia, Brescia, Italy
| | - Riccardo Tonini
- Department of Medical and Surgery Specialties, Radiological Sciences and Public Health, School of Dentistry, University of Brescia, Brescia, Italy
| | - Giulia Boschi
- Department of Medical and Surgery Specialties, Radiological Sciences and Public Health, School of Dentistry, University of Brescia, Brescia, Italy -
| | - Giovanni Cavalli
- Department of Medical and Surgery Specialties, Radiological Sciences and Public Health, School of Dentistry, University of Brescia, Brescia, Italy
| | - Stefano A Salgarello
- Department of Medical and Surgery Specialties, Radiological Sciences and Public Health, School of Dentistry, University of Brescia, Brescia, Italy
| |
Collapse
|
18
|
Davoudi A, Mosharraf R, Akhavan A, Zarei F, Pourarz S, Iravani S. Effect of laser irradiation on push-out bond strength of dental fiber posts to composite resin core buildups: A systematic review and meta-analysis. Photodiagnosis Photodyn Ther 2019; 27:184-192. [PMID: 31163283 DOI: 10.1016/j.pdpdt.2019.05.044] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/28/2018] [Revised: 04/29/2019] [Accepted: 05/31/2019] [Indexed: 10/26/2022]
Abstract
BACKGROUND The bonding of fiber posts (FPs) to composite resin core buildups is a challenge due to limited penetration of resin to the polymeric matrix of FPs. This review article tries to answer this question: "What are the effects of laser surface treatment of FPs, compared to other surface roughening methods, on push-out bond strength (PBS) of FPs bonded to composite resin core buildups?" METHODS Searches were run in seven electronic databases with a focus on proper key words. Related titles and abstracts, up to February 2019, were screened, selected, read and subjected to quality assessments. RESULTS After the initial search, a total of 2635 articles were included in the study. Finally, 6 studies were reliable enough in methodology to be included. All the studies were in vitro with a total of 359 samples. Er:YAG (-0.05, 95% CI: -2.96 to 2.86; P = 0.97) and Er,Cr:YSGG (0.84, 95% CI: -0.12 to 1.81; P = 0.08) treated samples showed no significant overall mean differences in final PBS compared to the control groups. Moreover, pretreatment with Er,Cr:YSGG laser and sandblasting with 50 μm alumina showed an overall mean difference of -0.42 for PBS (95% CI: -1.23 to 0.39) with no significant differences. CONCLUSIONS Laser irradiation of FPs seems to provide no significant increase in PBS values of FPs bonded to composite resin core buildups. Effects of surface treatment of FPs with laser irradiation and sandblasting with 50 μm alumina might be similar in increasing the final PBS, either.
Collapse
Affiliation(s)
- Amin Davoudi
- Department of Prosthodontics, Dental School, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Ramin Mosharraf
- Dental Materials Research Center, Department of Prosthodontics, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran.
| | - Ali Akhavan
- Dental Materials Research Center, Department of Endodontics, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Fardin Zarei
- Department of Periodontics, Dental School, Gilan University of Medical Sciences, Gilan, Iran
| | - Sobhan Pourarz
- Department of Oral and Maxillofacial Surgery, Dental School, Isfahan University of Medical Sciences, Isfahan, Iran
| | - Shiva Iravani
- Department of Endodontics, School of Dentistry, Shahrekord University of Medical Sciences, Shahrekord, Iran
| |
Collapse
|
19
|
Abstract
Objectives To determine, by means of anonymous self-report questionnaires, the changes in demographic profile, practising details and utilisation of clinical techniques/materials of general dental practitioners (GDPs) in the UK between 2002 and 2015. Method A wide-ranging, validated questionnaire, designed to elicit information on the practising arrangements and techniques and materials used, was distributed to UK-based GDPs in 2002, 2008 and 2015 with a request that they complete the questionnaire and return it by post in the reply-paid envelope to the corresponding author. Results Questionnaires were distributed by post to 1,000 UK-based GDPs in 2004 and 2008, with an additional 500 questionnaires being distributed at postgraduate meetings in 2015. Response rates of 70%, 66% and 78% were achieved, respectively. Of the respondents, 73% were male in 2002, while 67% and 60% were male in 2008 and 2015, respectively. In 2002, 65% were practice principals, falling to 51% in 2015. Regarding how patients paid for their dental care, 86% of respondents in 2002 treated patients within the NHS arrangements, compared with 57% and 50% in 2008 and 2015, respectively. The data collected in 2015 indicated that 55% of respondents had an intra-oral camera; while, with regard to recently introduced concepts and techniques, 80% used nickel-titanium files, 47% used zirconia-based bridgework, 25% used tricalcium silicate, and 17% used CAD/CAM restoration. Of great interest, perhaps, is the response to digital radiography/imaging, with the results indicating that, by 2015, 74% of respondents used this form of radiography. Conclusion Results from the three surveys indicated that NHS service provision has dropped to 50%. Regarding the staffing of dental practices, just over half the respondents were practice principals. The results also indicated that UK dentists continue to be innovative and forward-looking in the techniques that they employ.
Collapse
|
20
|
De Santis R, Russo T, Gloria A. An analysis on the potential of diode-pumped solid-state lasers for dental materials. Mater Sci Eng C Mater Biol Appl 2018; 92:862-867. [PMID: 30184815 DOI: 10.1016/j.msec.2018.07.051] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/10/2017] [Revised: 07/09/2018] [Accepted: 07/20/2018] [Indexed: 11/30/2022]
Abstract
Material structure-property relationship is strongly related to the employed process technology. Over the past years, laser processing of engineering materials has been proposed in many fields and different uses for diode lasers have been found in dentistry. In this contest, the potential of GaN- and InGaN-based laser diodes to cure dental materials was analysed. Two wavelengths of 405 nm and 445 nm were used as heat or light sources for warm condensation of gutta-percha, light transmission in dental posts and brackets or light curing of dental composites. Additive manufacturing approach was considered to fabricate 3D root analogues, suitable supports, positioning systems and moulds for optical measurements. A three-axis CAD/CAM system was implemented for positioning and aligning the laser beam. The ability of diode-pumped solid-state lasers to cure dental materials or to transmit light was compared to that of a traditional instrument. Temperature profile at the apex of an additive manufactured root canal sealed with gutta-percha, light transmission through translucent quartz fiber post or through aesthetic ceramic bracket, bending properties and morphological features of light cured dental composites (Gradia Direct - GC Corporation and Venus Diamond - Heraeus Kulzer) were measured. Results showed a very high potential of diode-pumped solid-state lasers to be used in endodontics, orthodontics and restorative dentistry.
Collapse
Affiliation(s)
- Roberto De Santis
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le J.F. Kennedy 54 - Pad. 20 Mostra d'Oltremare, 80125 Naples, Italy
| | - Teresa Russo
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le J.F. Kennedy 54 - Pad. 20 Mostra d'Oltremare, 80125 Naples, Italy
| | - Antonio Gloria
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le J.F. Kennedy 54 - Pad. 20 Mostra d'Oltremare, 80125 Naples, Italy.
| |
Collapse
|
21
|
Jalalian E, Darvish N, Saberi S. Investigating the effect of G-Bond and Z-PRIME Plus on the bond strength between prefabricated zirconia posts and the root canal wall in vitro. J Dent Res Dent Clin Dent Prospects 2018; 12:128-134. [PMID: 30087764 PMCID: PMC6076877 DOI: 10.15171/joddd.2018.020] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2017] [Accepted: 05/18/2018] [Indexed: 11/17/2022] Open
Abstract
Background. The aim of this study was to analyze the effect of G-Bond and Z-PRIME Plus on the bond strength between prefabricated zirconia posts and the root canal wall.
Methods. The study was carried out on 21 premolar teeth with similar conditions. The samples were cut at the CEJ. After root canal treatment of the roots, the post space was prepared up to a length of 10mm. The samples were randomly assigned to two groups of 10. G-Bond was used in one group and Z-PRIME Plus in the other to prepare the posts’ surfaces. After cementation and mounting the samples in polyester, the post was cut from the apical area into three equal sections. The bond strength of the samples was tested using the push-out test on a universal testing machine. Data wereanalyzed using t-test.
Results. The meanpush-out bond strengths in the control,G-Bond and Z-PRIME Plus groups were 14.3, 27.6±11.8 and 27.4±13.4N, respectively. There was no statistically significant difference between the two groups (P<0.9). Both methods of surface treatment increased bond strength. The bond strengths were different in different sections such as coronal, middle and apical in each group.
Conclusion. There was no significant differencebetween the G-Bond and Z-PRIME Plus groups and both products in-creased the bond strength of prefabricated zirconia posts.
Collapse
Affiliation(s)
- Ezzatollah Jalalian
- Department of Fixed Prosthodontics, Member of Dental Materials Research Center, Dental Branch of Islamic Azad University, Tehran, Iran
| | | | - Sogol Saberi
- Dentist, Laser Research Center of Dentistry, Dentistry Research Institute, University of Medical Sciences, Tehran, Iran
| |
Collapse
|
22
|
Pruthi V, Talwar S, Nawal RR, Pruthi PJ, Choudhary S, Yadav S. Evaluation of retention and fracture resistance of different fiber reinforced posts: An in vitro study. J Conserv Dent 2018; 21:157-161. [PMID: 29674817 PMCID: PMC5890405 DOI: 10.4103/jcd.jcd_320_16] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022] Open
Abstract
Aim: The aim of this study was to evaluate retention & fracture resistance of different fibre posts. Methodology: 90 extracted human permanent maxillary central incisors were used in this study. For retention evaluation, after obturation, post space preparation was done in all root canals and posts were cemented under three groups. Later, the posts were grasped & pulled out from the roots with the help of a three-jaw chuck at a cross-head speed of 5mm/min. Force required to dislodge each post was recorded in Newtons. To evaluate the fracture behavior of posts, artificial root canals were drilled into aluminium blocks and posts were cemented. Load required to fracture each post was recorded in Newtons. Results: The results of the present study show the mean retention values for Fibrekleer Parallel post were significantly greater than those for Synca Double tapered post & Bioloren Tapered post. The mean retention values of the Double tapered post & the tapered post were not statistically different. The Synca Double tapered post had the highest mean load to fracture, and this value was significantly higher than those of FibreKleer Parallel & Bioloren Tapered post. The mean fracture resistance values of Parallel & tapered post were not statistically different Conclusions: This study showed parallel posts to have better retention than tapered and double tapered posts. Regarding the fracture resistance, double tapered posts were found to be better than parallel and tapered posts.
Collapse
Affiliation(s)
- Varun Pruthi
- Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
| | - Sangeeta Talwar
- Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
| | - Ruchika Roongta Nawal
- Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
| | - Preeti Jain Pruthi
- Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
| | - Sarika Choudhary
- Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
| | - Seema Yadav
- Department of Conservative Dentistry and Endodontics, Maulana Azad Institute of Dental Sciences, New Delhi, India
| |
Collapse
|
23
|
Abdelaziz KM, Khalil AA, Alsalhi IY, Almufarrij AJ, Mojathel AY. Fracture Resistance of Tilted Premolars Restored with Different Post-Core Systems. J Int Soc Prev Community Dent 2018; 7:344-350. [PMID: 29387618 PMCID: PMC5774055 DOI: 10.4103/jispcd.jispcd_382_17] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/23/2017] [Accepted: 11/14/2017] [Indexed: 11/06/2022] Open
Abstract
Aims and Objective: To assess the effect of root tilt on the fracture resistance and failure pattern of endodontically-treated premolars restored with different post-core systems. Materials and Methods: Ninety endodontically-treated premolars were mounted in acrylic blocks with 0°, 12°, and 24° axial root tilt. Teeth in each group were restored in three subgroups with cast post-core, readymade metal posts and composite cores, and fiber post and composite cores. Crowns of all teeth were prepared coinciding with the long axis of the acrylic blocks to receive all-ceramic crowns. All restored teeth were stressed to record the maximum load at failure and the associated failure pattern. The collected data were statistically analyzed using two-way ANOVA, Tukey's, and Kruskal–Wallis tests at α = 0.05 on past software to detect any differences between subgroups. Results: Analysis of the collected data indicated significant differences between the tested subgroups (ANOVA, P = 3.86). Further analysis showed significant difference between all test subgroups and the control (Tukey's, P < 0.05). In general, teeth with 0° tilt seemed more resistant to fracture than the tilted ones. For all groups, teeth restored with fiber post and composite cores (SG3) were more resistant to fracture compared to other post-core systems (SG1 and SG2) (Tukey's, P < 0.05). The root fracture was the most commonly seen mode of failure. Conclusions: Root tilting usually affects the fracture resistance of teeth restored with post-core systems. The fiber post and composite cores seemed to be the best choice to restore teeth with different root tilting possibilities.
Collapse
Affiliation(s)
- Khalid M Abdelaziz
- Department of Restorative Dental Sciences, College of Dentistry, King Khalid University, Abha, Saudi Arabia
| | - Ashraf A Khalil
- Department of Restorative Dental Sciences, College of Dentistry, King Khalid University, Abha, Saudi Arabia.,Department of Crown and Bridge, Faculty of Dentistry, Tanta University, Tanta, Egypt
| | - Ibrahim Y Alsalhi
- Internship Program, College of Dentistry, King Khalid University, Abha, Saudi Arabia
| | - Ali J Almufarrij
- Internship Program, College of Dentistry, King Khalid University, Abha, Saudi Arabia
| | - Ahmed Y Mojathel
- Internship Program, College of Dentistry, King Khalid University, Abha, Saudi Arabia
| |
Collapse
|
24
|
Dibaji F, Mohammadi E, Farid F, Mohammadian F, Sarraf P, Kharrazifard MJ. The Effect of BC Sealer, AH-Plus and Dorifill on Push-out Bond Strength of Fiber Post. Iran Endod J 2017; 12:443-448. [PMID: 29225639 PMCID: PMC5722117 DOI: 10.22037/iej.v12i4.15863] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Download PDF] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Introduction: Dentinal canal walls are in direct contact with endodontic sealers prior to post space preparation and luting cements after post space preparation. This direct contact may affect the bond strength of intraradicular posts to root dentin. This study aimed to assess the effect of three different sealers on the bond strength of fiber posts to root dentin. Methods and Materials: The canals of 56 extracted single-rooted human premolars after selection and decoronation were prepared. For obturation of the canals, specimens were randomly divided into four groups (n=14) according to the type of sealer used in conjunction with gutta-percha: group 1 (control) without any sealer; group 2 with AH-Plus sealer (resin based); group 3 with Dorifill sealer (ZOE-based); and group 4 with BC Sealer (calcium silicate-based). Nine mm-deep post space was prepared in the canal of each specimen. Intraradicular fiber posts were cemented using dual-cure resin cement (Panavia F2.0). Sections of 1 mm thickness were made at the coronal, middle and apical thirds of the post space of each specimen. The push-out bond strength of post to root dentin was measured in a universal testing machine. The data were analyzed using one-way ANOVA and post-hoc Tukey’s test. Results: The mean push-out bond strength in the coronal third was significantly lower in Dorifill group compared to AH-Plus (P=0.004). This value was significantly lower in BC Sealer group than AH-Plus (P=0.000) and control group (P=0.03). In middle and apical thirds, the mean push-out bond strength was not significantly different among the four groups (P=0.407, P=0.065, respectively). The mean push-out bond strength was significantly lower in apical than coronal third in AH-Plus group (P=0.001). Conclusion: Application of BC Sealer and Dorifill decreased the mean push-out bond strength of intracanal post to root dentin in the coronal third in comparison to AH-Plus.
Collapse
Affiliation(s)
- Fatemeh Dibaji
- Department of Endodontics, Dental School, Tehran University of Medical Sciences, International Campus, Tehran, Iran
| | - Elahe Mohammadi
- Dental Student, Dental School, Tehran University of Medical Sciences, International Campus, Tehran, Iran
| | - Farzaneh Farid
- Department of Prosthodontics, Dental School, Tehran University of Medical Sciences, International Campus , Tehran, Iran
| | - Fatemeh Mohammadian
- Department of Endodontics, Dental School, Tehran University of Medical Sciences, International Campus, Tehran, Iran
| | - Pegah Sarraf
- Department of Endodontics, Dental School, Tehran University of Medical Sciences, International Campus, Tehran, Iran
| | | |
Collapse
|
25
|
Bitter K, Maletic A, Neumann K, Breschi L, Sterzenbach G, Taschner M. Adhesive Durability Inside the Root Canal Using Self-adhesive Resin Cements for Luting Fiber Posts. Oper Dent 2017; 42:E167-E176. [PMID: 28976849 DOI: 10.2341/17-017-l] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
OBJECTIVES The aim of the study was to investigate the effects of various self-adhesive resin cements on the push-out bond strengths and nanoleakage expression at the luting interfaces of fiber posts immediately and after one year of aging. METHODS AND MATERIALS One hundred forty-four extracted human anterior teeth were endodontically treated. After post space preparation, fiber posts were luted using five commercially available self-adhesive resin (SAR) cements and a core build-up material applied with a self-etch adhesive (BF: Bifix SE/Rebilda Post, VOCO; CSA: Clearfil SA Cement/Rely X Fiber Post, 3M ESPE; RX: RelyX Unicem 2/Rely X Fiber Post, 3M ESPE; SPC: Speed Cem/FRC Postec, Ivoclar Vivadent; SMC: Smart Cem/X Post, Dentsply; RB: Rebilda DC-Futurabond/Rebilda Post; n=22). For each group, half of the specimens were subjected to thermocycling (TC) (5°C-55°C, 10,000 cycles) and stored humid for one year at 37°C. Push-out bond strength data of six slices (thickness 1 mm) per root and nanoleakage expression of representative specimens were evaluated after 24 hours (baseline) and after TC and storage for one year (aging), respectively. RESULTS Bond strength differed significantly among resin cements (p<0.0005) and the location inside the root canal (p<0.0005), but not by aging (p=0.390; repeated-measures analysis of variance). SMC (14.6±5.8 MPa) and RX (14.1±6.8 MPa) revealed significantly higher bond strength compared to BF (10.6±5.4 MPa) and RB (10.0±4.6 MPa) but differed not significantly from SPC (12.8±4.8) MPa; CSA (6.1±4.6 MPa) revealed significantly lower bond strength compared to all other investigated materials (p<0.05; Tukey Honestly Significantly Different). Qualitative nanoleakage analysis revealed more silver deposits at the interface in all groups after aging. For CSA, a large amount of silver deposits inside the cement was also observed at baseline and after aging. CONCLUSIONS Fiber post luting using SAR cements demonstrated reliable bond strengths. Product-specific differences and initial degradation effects could be demonstrated.
Collapse
|
26
|
Irmak Ö, Yaman BC, Lee DY, Orhan EO, Mante FK, Ozer F. Flexural strength of fiber reinforced posts after mechanical aging by simulated chewing forces. J Mech Behav Biomed Mater 2017; 77:135-139. [PMID: 28898724 DOI: 10.1016/j.jmbbm.2017.09.001] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2017] [Revised: 09/02/2017] [Accepted: 09/03/2017] [Indexed: 02/01/2023]
Abstract
This study evaluated the effect of simulated chewing forces on the flexural strength of fiber reinforced posts (FRPs). Four different brands of FRPs were selected as main group for the study: RelyX Fiber Post (RX), IceLight (ICE), Unicore Posts (UC), FlouroPost (FP). Ten posts in each main group didn't receive any aging process and tested as baseline (BL), other ten posts were subjected to simulated chewing forces/mechanical aging (MA) as follows: Post spaces were prepared in acrylic with drill. Depth of preparation was adjusted to leave 4-mm coronal part of posts protruding from canals. Coronal parts were incrementally restored with resin-composite (Clearfil Majesty Posterior A2, Kuraray, Osaka, Japan). Prepared samples were subjected to chewing cycles in a chewing simulator (Chewing Simulator CS-4, Mechatronik, Germany). Flexural strengths of all groups were measured with three-point bending test. Data were analyzed by two-way ANOVA and Tukey's test (α = 0.05). After MA, flexural strengths of all posts were significantly decreased when compared with BL for all FRPs tested (p < 0.05). At BL, highest flexural strength values were obtained for ICE. After MA, similar to BL, highest flexural strength values were obtained for ICE. Only RX showed statistically significant difference when compared with ICE (p < 0.05). UC and FP showed similar flexural strength values with ICE (p > 0.05). It may be concluded that chewing forces on post-core systems may reduce the flexural strengths of FRPs.
Collapse
Affiliation(s)
- Özgür Irmak
- Eskişehir Osmangazi University, Faculty of Dentistry, Department of Restorative Dentistry, Eskişehir, Turkey.
| | - Batu Can Yaman
- Eskişehir Osmangazi University, Faculty of Dentistry, Department of Restorative Dentistry, Eskişehir, Turkey
| | | | - Ekim Onur Orhan
- Eskişehir Osmangazi University, Faculty of Dentistry, Department of Endodontics, Eskişehir, Turkey
| | - Francis K Mante
- University of Pennsylvania, School of Dental Medicine, Department of Preventive and Restorative Sciences, Philadelphia, PA, USA
| | - Fusun Ozer
- University of Pennsylvania, School of Dental Medicine, Department of Preventive and Restorative Sciences, Philadelphia, PA, USA
| |
Collapse
|
27
|
Rodrigues MDP, Soares PBF, Valdivia ADCM, Pessoa RS, Veríssimo C, Versluis A, Soares CJ. Patient-specific Finite Element Analysis of Fiber Post and Ferrule Design. J Endod 2017; 43:1539-1544. [DOI: 10.1016/j.joen.2017.04.024] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2017] [Revised: 04/19/2017] [Accepted: 04/22/2017] [Indexed: 11/26/2022]
|
28
|
Duggal M, Tong HJ, Al-Ansary M, Twati W, Day PF, Nazzal H. Interventions for the endodontic management of non-vital traumatised immature permanent anterior teeth in children and adolescents: a systematic review of the evidence and guidelines of the European Academy of Paediatric Dentistry. Eur Arch Paediatr Dent 2017; 18:139-151. [PMID: 28508244 PMCID: PMC5488080 DOI: 10.1007/s40368-017-0289-5] [Citation(s) in RCA: 52] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2017] [Accepted: 04/10/2017] [Indexed: 01/09/2023]
Abstract
Aim This systematic review was undertaken in order to develop guidelines for the European Academy of Paediatric Dentistry for the management of non-vital permanent anterior teeth with incomplete root development. Methods Three techniques were considered; apexification by single or multiple applications of calcium hydroxide, use of Mineral Trioxide Aggregate (MTA) for the creation of an apical plug followed by obturation of the root canal, and finally a Regenerative Endodontic Technique (RET). Scottish Intercollegiate Guideline Network (SIGN) Guidelines (2008) were used for the synthesis of evidence and grade of recommendation. Results Variable levels of evidence were found and generally evidence related to these areas was found to be weak and of low quality. It was not possible to produce evidence-based guidelines based on the strength of evidence that is currently available for the management of non-vital immature permanent incisors. Conclusions Based on the available evidence the European Academy of Paediatric Dentistry proposes Good Clinical Practice Points as a guideline for the management of such teeth. It is proposed that the long term use of calcium hydroxide in the root canals of immature teeth should be avoided and apexification with calcium hydroxide is no longer advocated. The evidence related to the use of a Regenerative Endodontic Technique is currently extremely weak and therefore this technique should only be used in very limited situations where the prognosis with other techniques is deemed to be extremely poor. The current review supports the use of MTA followed by root canal obturation as the treatment of choice.
Collapse
Affiliation(s)
- M Duggal
- Department of Paediatric Dentistry, Leeds Dental Institute, University of Leeds, The Worsley Building, Clarendon Way, Leeds, LS2 9LU, UK. .,Discipline of Orthodontics and Paediatric Dentistry, Faculty of Dentistry, National University of Singapore, 11 Lower Kent Ridge Road, Singapore, 119083, Singapore.
| | - H J Tong
- Discipline of Orthodontics and Paediatric Dentistry, Faculty of Dentistry, National University of Singapore, 11 Lower Kent Ridge Road, Singapore, 119083, Singapore
| | - M Al-Ansary
- Department of Paediatric Dentistry, Leeds Dental Institute, University of Leeds, The Worsley Building, Clarendon Way, Leeds, LS2 9LU, UK
| | - W Twati
- Department of Paediatric Dentistry, Leeds Dental Institute, University of Leeds, The Worsley Building, Clarendon Way, Leeds, LS2 9LU, UK
| | - P F Day
- Department of Paediatric Dentistry, Leeds Dental Institute, University of Leeds, The Worsley Building, Clarendon Way, Leeds, LS2 9LU, UK
| | - H Nazzal
- Department of Paediatric Dentistry, Leeds Dental Institute, University of Leeds, The Worsley Building, Clarendon Way, Leeds, LS2 9LU, UK
| |
Collapse
|
29
|
Wang Y, Wang R, Habib E, Wang R, Zhang Q, Sun B, Zhu M. Surface modification of quartz fibres for dental composites through a sol-gel process. Materials Science and Engineering: C 2017; 74:21-6. [DOI: 10.1016/j.msec.2016.12.124] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2016] [Revised: 11/17/2016] [Accepted: 12/19/2016] [Indexed: 11/18/2022]
|
30
|
Mushashe AM, Amaral ROJFD, Rezende CEE, Filho FB, Cunha LFD, Gonzaga CC. Effect of Sonic Vibrations on Bond Strength of Fiberglass Posts Bonded to Root Dentin. Braz Dent J 2017; 28:30-34. [PMID: 28301010 DOI: 10.1590/0103-6440201601107] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2016] [Accepted: 11/09/2016] [Indexed: 11/22/2022] Open
Abstract
Sonic vibrations may improve the bond strength and durability of fiberglass posts by improving adhesive penetration into dentin as well as the cement flow. The objective of this study was to evaluate the effect of sonic vibrations on the bond strength between fiberglass posts and root dentin using the pull-out test. Bovine roots were endodontically treated and divided randomly into four groups (n=12): Group C - conventional cementation (control); Group SA - sonic vibration (Smart Sonic Device, FGM) of the adhesive system and conventional post accommodation; SP group - conventional adhesive application and sonic vibration of the post during accommodation; and SASP - sonic vibration of the system adhesive and the post during accommodation. The posts were cleaned, treated with a silane and adhesive system (Ambar, FGM), and cemented with a dual-cured resin cement (Allcem Core, FGM). After 24 h, the specimens were subjected to mechanical tests and failure analyses. Representative specimens were analyzed by a scanning electron microscope to observe the cementation line. The results were analyzed using ANOVA and Tukey's test (a=5%). The bond strengths were as follows: SASP (90.9±27.1 N), C (121.4±60.6 N), SA (127.6±31.8 N) and SP (156.4±41.3 N). The use of sonic vibrations during the application of adhesive or post cementation separately did not affect the bond strength but had a negative effect when used for both procedures.
Collapse
|
31
|
Jovanovski S, Popovski J, Dakskobler A, Marion L, Jevnikar P. The influence of crown ferrule on fracture resistance of endodontically treated maxillary central incisors. Balkan J Dent Med 2017. [DOI: 10.1515/bjdm-2017-0006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
Abstract
Background: Prefabricated zirconia posts can contribute to increasing the fracture resistance of the endodontically treated teeth. Purpose. This in vitro study compared the fracture resistance of endodontically treated central maxillary incisors prepared with 2mm ferrule length to the ones without ferrule. Material and methods: Twenty-four caries-free maxillary central incisors were divided into 2 groups of 12. In group A circumferential external dentin shoulders were prepared for 2mm external dentin ferrule length. There was no ferrule preparation in Group B. Zirconia VALLPOST BO-S (Ø 1,6mm), Ljubljana, Slovenia were used with retention forms in the coronary part. Core build-up was made of pressed ceramics (IPS e.max Press, Ivoclar, Liechtenstein). Crowns were manufactured from the same ceramic material (IPS e.max Press, Ivoclar). After root canal treatment and post space preparation, all posts were cemented with an adhesive resin cement (Multilink Automix, Ivoclar). The specimens were embedded in acrylic resin blocks (ProBase Polymer/Monomer, Ivoclar) and loaded at an angle of 45o to the long axis in an Instron Testing Machine 4301 (Instron Corp., USA) at a crosshead speed of 1mm/min until fracture. Fracture patterns and loads were recorded. A significance level of p<0.05 was used for all comparisons. Two-way analysis of variance was used for statistical analysis. Failure patterns were analyzed with the optical microscope Stereo Discovery V.8 (Carl Zeiss, Germany) and compared using the chisquare nonparametric test. Results: The mean values (±SD) of fracture loads (N) for the Groups A and B were 664.63N (±49.14) and 519.36N (±71.65) recpectively. Significantly lower failure loads were recorded for the specimens in the group B. Failure patterns within the groups revealed non-catastrophic failure in 70% of the specimens for group A and 85% for group B. Conclusions: Within the limitations of this in vitro study, it can be concluded that zirconia VALLPOST BO-S (Ø 1,6mm) with press-ceramic cores and crowns, can be used for restoration of endodontically treated teeth. The teeth prepared with 2mm external dentin ferrule length were found to be more fracture resistant than teeth without ferrule.
Collapse
|
32
|
Weerapperuma ID, Taylor C, Satterthwaite JD. A survey to compare the use and rationale for selection of intra-radicular posts among dental practitioners. Br Dent J 2016; 221:635-8. [DOI: 10.1038/sj.bdj.2016.861] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 09/04/2016] [Indexed: 11/08/2022]
|
33
|
Abstract
The primary function of an endodontic post is to provide retention for the core and enable full sealing of the coronal portion of the root canal. Traditionally used metal posts do not meet the requirements of modern dental medicine due to some fairly significant drawbacks such as color, corrosion potential, non-adhesive bonding and high modulus of elasticity which can lead to root fracture. Recently, esthetic ceramic and fiber reinforced posts have been manufactured in order to avoid such imperfections. Since much attention has been devoted to the esthetic aspects of dental medicine, the use of these posts with composite/ceramic cores is very common in restorative dentistry and it is actually becoming a standard. This is due to the fact that, apart from being an esthetically pleasing material, they are also biocompatible, have good physical properties and the capacity of adhesive bonding to tooth tissue and core buildup. Nonetheless, a good clinician should know how to spot the difference between them in order to select and use the appropriate post system in each specific situation.
Collapse
Affiliation(s)
| | - Amižić
- Health Center of Split, Dalmatia County
| | - Anja Baraba
- Department of Endodontics and Restorative Dentistry, School of Dental Medicine University of Zagreb
| |
Collapse
|
34
|
Affiliation(s)
- Huda Melike Bayram
- Faculty of Dentistry, Department of Endodontics, Gaziosmanpaşa University, Tokat, Turkey
| | - Emre Bayram
- Faculty of Dentistry, Department of Endodontics, Gaziosmanpaşa University, Tokat, Turkey
| | - Esra Kul
- Faculty of Dentistry, Department of Prosthodontics, Atatürk University, Erzurum, Turkey
| | - Hakan Göktürk
- Faculty of Dentistry, Department of Endodontics, Gaziosmanpaşa University, Tokat, Turkey
| |
Collapse
|
35
|
Turker SB, Alkumru HN, Akalin B. Fracture resistance of endodontically treated canines restored with different sizes of fiber post and all-ceramic crowns. J Adv Prosthodont 2016; 8:158-66. [PMID: 27141261 PMCID: PMC4852269 DOI: 10.4047/jap.2016.8.2.158] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2015] [Revised: 12/18/2015] [Accepted: 01/12/2016] [Indexed: 11/11/2022] Open
Abstract
PURPOSE The aim of this study was to determine the fracture resistance and the mode of fracture of endodontically treated teeth restored with different fiber posts and all-ceramic crowns. MATERIALS AND METHODS Two glass fiber reinforced post systems in two different sizes and polyethylene fiber ribbon in two different thicknesses (n=10) were used. The specimens, restored with all-ceramic crowns, were subjected to a compressive load (in N) delivered at a 130-degree angle to the long axis until a fracture could be noted. The results were analyzed statistically with a One-Way ANOVA test (P<.05). RESULTS Statistically significant differences were observed between the mean fracture resistance values of Postec, Snowlight, and Kerr Connect thin specimens (P<.0095). The Postec results (395.70 N) were found to be significantly higher than the others. No statistical difference was observed among the thick specimens (P<.2657). The mean fracture resistance values of the Snowlight thick samples were found to be higher than those of the Snowlight thin samples. The specimens were always fractured around the cemento-enamel junction at the palatinal side. No post fracture was observed for the thin Snowlight and Kerr Connect specimens or for the thick Postec and Kerr Connect specimens. Among the common failure types of the specimens, the worst was observed to be the root fracture failure. The highest post dislodgement failure result (80%) was obtained from the thin Kerr Connect specimen. CONCLUSION In terms of optimizing fracture resistance, the fiber post size selection should be done according to the forces applied to the restored teeth.
Collapse
Affiliation(s)
- Sebnem Begum Turker
- Department of Prosthodontics, Faculty of Dentistry - Marmara University, Istanbul, Turkey
| | - Hasan Necdet Alkumru
- Department of Prosthodontics, Schulich School of Medicine and Dentistry, University of Western Ontario, Toronto, Canada
| | - Buket Akalin
- Department of Prosthodontics, Faculty of Dentistry - Marmara University, Istanbul, Turkey
| |
Collapse
|
36
|
Aleisa K, Al-Dwairi ZN, Alsubait SA, Morgano SM. Pull-out retentive strength of fiber posts cemented at different times in canals obturated with a eugenol-based sealer. J Prosthet Dent 2016; 116:85-90. [PMID: 26922207 DOI: 10.1016/j.prosdent.2015.12.010] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/08/2015] [Revised: 12/18/2015] [Accepted: 12/28/2015] [Indexed: 11/18/2022]
Abstract
STATEMENT OF PROBLEM Currently, no standard luting protocol exists for fiber posts. In addition, no agreement has been reached on the time interval between canal obturation and post space preparation and cementation. PURPOSE The purpose of this in vitro study was to evaluate the retention of fiber posts cemented with 3 different types of cement: Paracore, Variolink II, and RelyX Unicem cement after 24 hours or 2 weeks in root canals obturated with gutta percha and a eugenol-based sealer. MATERIAL AND METHODS Seventy-two caries-free, freshly extracted, single-rooted human mandibular first premolar teeth with straight root canals were prepared and obturated with gutta percha and Endofil sealer. Specimens were divided into 2 groups (n=36): post spaces prepared 24 hours after obturation and post spaces prepared 2 weeks after obturation. Posts in both groups were luted with 1 of 3 different luting agents (n=12), ParaCore, Variolink II, or RelyX Unicem cement. Each tooth specimen was vertically secured in a universal testing machine, and a constant pull-out loading rate of 0.5 mm/min was applied until cement failure occurred. Data were statistically analyzed with 2-way and 1-way ANOVAs and t tests. RESULTS Two-way ANOVA indicated statistically significant differences in mean post retention among the 3 cement types (P<.001) and among the means of the different time intervals investigated (P<.001). Significant differences were noted among all cement types tested between the 24-hour and 2-week time intervals (P<.05). CONCLUSIONS Time elapsed between canal obturation and post cementation significantly influenced fiber post retention, regardless of the type of resin cement. Fiber posts showed significantly higher retention if cemented after 24 hours of obturation than if cementation occurred after 2 weeks.
Collapse
Affiliation(s)
- Khalil Aleisa
- Professor, Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
| | - Ziad Nawaf Al-Dwairi
- Professor, Department of Prosthodontics, Faculty of Dentistry, Jordan University of Science and Technology, Irbid, Jordan
| | - Sara A Alsubait
- Assistant Professor, Division of Endodontic Dentistry, Department of Restorative Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia
| | - Steven M Morgano
- Professor, Department of Restorative Dentistry, Rutgers School of Dental Medicine, Newark, NJ
| |
Collapse
|
37
|
|
38
|
da Cunha LF, Mondelli J, Auersvald CM, Gonzaga CC, Mondelli RF, Correr GM, Furuse AY. Endocrown with Leucite-Reinforced Ceramic: Case of Restoration of Endodontically Treated Teeth. Case Rep Dent 2015; 2015:750313. [PMID: 26557391 DOI: 10.1155/2015/750313] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2015] [Accepted: 10/01/2015] [Indexed: 12/01/2022] Open
Abstract
A common problem encountered by dentists is the restorative treatment of nonvital teeth. When the pulp chamber presents appropriate conditions for retention, the endocrown is indicated. This monolithic, ceramic adhesive restoration is singularly used yet warrants wider recognition and use. The endocrown allows preservation of the tooth structure and is minimally invasive. Currently, this treatment option, of a core buildup and full coverage restoration, reduces tooth structure excessively. This treatment presents not only functional limitations but also aesthetic concerns. Recently, the VITA-PM9 system, a leucite-reinforced glass ceramic, has been increasingly used in a variety of clinical situations due to its satisfactory physical-mechanical and aesthetic properties. Therefore, the present study describes a case of surgical restoration of a nonvital tooth using the endocrown technique and the VITA-PM9.
Collapse
|
39
|
Balevi B. Metal or fibre posts and root fractures. Evid Based Dent 2015; 16:80-81. [PMID: 26492802 DOI: 10.1038/sj.ebd.6401115] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
|
40
|
Figueiredo FED, Martins-Filho PRS, Faria-e-Silva AL. Do Metal Post–retained Restorations Result in More Root Fractures than Fiber Post–retained Restorations? A Systematic Review and Meta-analysis. J Endod 2015; 41:309-16. [DOI: 10.1016/j.joen.2014.10.006] [Citation(s) in RCA: 76] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2014] [Revised: 09/30/2014] [Accepted: 10/09/2014] [Indexed: 10/24/2022]
|
41
|
Liu M, Chen J, Hu X, Du Y, Xia Y, Gu N, Zhang F. Enhanced properties of fiberglass-reinforced photocurable resin pile by introducing different fiberglass surface treatments and their biological evolution. RSC Adv 2015. [DOI: 10.1039/c5ra08964f] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
The properties of fiberglass-reinforced photocurable resin piles are enhanced by introducing different fiberglass surface treatments, which shows good cell compatibility.
Collapse
Affiliation(s)
- Mei Liu
- Jiangsu Key Laboratory of Oral Diseases
- Nanjing Medical University
- Nanjing 210029
- China
| | - Jianshan Chen
- Jiangsu Key Laboratory of Oral Diseases
- Nanjing Medical University
- Nanjing 210029
- China
| | - Xiaokun Hu
- Jiangsu Key Laboratory of Oral Diseases
- Nanjing Medical University
- Nanjing 210029
- China
| | - Yueming Du
- Jiangsu Key Laboratory of Oral Diseases
- Nanjing Medical University
- Nanjing 210029
- China
| | - Yang Xia
- Jiangsu Key Laboratory of Oral Diseases
- Nanjing Medical University
- Nanjing 210029
- China
| | - Ning Gu
- Suzhou Institute & Collaborative Innovation Center of Suzhou Nano Science and Technology
- Southeast University
- Suzhou 215000
- China
| | - Feimin Zhang
- Jiangsu Key Laboratory of Oral Diseases
- Nanjing Medical University
- Nanjing 210029
- China
- Suzhou Institute & Collaborative Innovation Center of Suzhou Nano Science and Technology
| |
Collapse
|
42
|
Yaman BC, Ozer F, Takeichi T, Karabucak B, Koray F, Blatz MB. Effect of thermomechanical aging on bond strength and interface morphology of glass fiber and zirconia posts bonded with a self-etch adhesive and a self-adhesive resin cement to natural teeth. J Prosthet Dent 2014; 112:455-64. [DOI: 10.1016/j.prosdent.2013.11.008] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2013] [Revised: 10/31/2013] [Accepted: 11/01/2013] [Indexed: 10/25/2022]
|
43
|
Abstract
Teeth that have short clinical crown, which are not alone enough to support the definitive restoration can be best treated using the post and core system. The advantages of fiber post over conventional metallic post materials have led to its wide acceptance. In addition to that the combination of aesthetic and mechanical benefits of fiber post has provided it with a rise in the field of dentistry. Also the results obtained from some clinical trials have encouraged the clinicians to use the fiber posts confidently. Fiber posts are manufactured from pre-stretched fibers impregnated within a resin matrix. The fibers could that be of carbon, glass/silica, and quartz, whereas Epoxy and bis-GMA are the most widely used resin bases. But recently studies are also found to be going on for polyimide as possible material for the fiber post resin base as a substitute for the conventional materials.
Collapse
Affiliation(s)
- Aashwini Lamichhane
- Department of Prosthodontics, Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China. ; Shanghai Key Laboratory of Stomatology, Shanghai, China
| | - Chun Xu
- Department of Prosthodontics, Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China. ; Shanghai Key Laboratory of Stomatology, Shanghai, China
| | - Fu-Qiang Zhang
- Department of Prosthodontics, Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China. ; Shanghai Key Laboratory of Stomatology, Shanghai, China
| |
Collapse
|
44
|
Koch ATA, Binus SM, Holzschuh B, Petschelt A, Powers JM, Berthold C. Restoration of endodontically treated teeth with major hard tissue loss - influence of post surface design on pull-out bond strength of fiber-reinforced composite posts. Dent Traumatol 2014; 30:270-9. [DOI: 10.1111/edt.12089] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 11/06/2013] [Indexed: 11/28/2022]
Affiliation(s)
- Andreas Thomas Alfred Koch
- Dental Clinic 1 - Operative Dentistry and Periodontology; Friedrich-Alexander-University; Erlangen Germany
| | - Stefanie Martina Binus
- Dental Clinic 1 - Operative Dentistry and Periodontology; Friedrich-Alexander-University; Erlangen Germany
| | - Barbara Holzschuh
- Dental Clinic 1 - Operative Dentistry and Periodontology; Friedrich-Alexander-University; Erlangen Germany
| | - Anselm Petschelt
- Dental Clinic 1 - Operative Dentistry and Periodontology; Friedrich-Alexander-University; Erlangen Germany
| | - John M. Powers
- Houston Center for Biomaterials and Biomimetics; University of Texas School of Dentistry at Houston; Houston TX USA
| | - Christine Berthold
- Dental Clinic 1 - Operative Dentistry and Periodontology; Friedrich-Alexander-University; Erlangen Germany
- Faculty of Dentistry; Division of Endodontics; University of British Columbia; Vancouver BC Canada
| |
Collapse
|
45
|
Zamboni Quitero MF, Garone-Netto N, de Freitas PM, de Cerqueira Luz MAA. Effect of post translucency on bond strength of different resin luting agents to root dentin. J Prosthet Dent 2014; 111:35-41. [DOI: 10.1016/j.prosdent.2013.09.012] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
46
|
Arslan H, Kurklu D, Ayrancı LB, Barutcigil C, Yılmaz CB, Karatas E, Topçuoğlu HS. Effects of post surface treatments including Er:YAG laser with different parameters on the pull-out bond strength of the fiber posts. Lasers Med Sci 2014; 29:1569-74. [DOI: 10.1007/s10103-013-1485-0] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2013] [Accepted: 10/30/2013] [Indexed: 10/26/2022]
|
47
|
Liu C, Liu H, Qian YT, Zhu S, Zhao SQ. The influence of four dual-cure resin cements and surface treatment selection to bond strength of fiber post. Int J Oral Sci 2013; 6:56-60. [PMID: 24177170 PMCID: PMC3967305 DOI: 10.1038/ijos.2013.83] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2012] [Accepted: 08/13/2013] [Indexed: 11/27/2022] Open
Abstract
In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodontically treated and standardized post spaces were prepared. Four post pre-treatments were tested: (i) no pre-treatment (NS, control), (ii) sandblasting (SA), (iii) silanization (SI) and (iv) sandblasting followed by silanization (SS). Per pre-treatment, four dual-cure resin cements were used for luting posts: DMG LUXACORE Smartmix Dual, Multilink Automix, RelyX Unicem and Panavia F2.0. All the specimens were subjected to micro push-out test. Two-way analysis of variance and Tukey post hoc tests were performed (α=0.05) to analyze the data. Bond strength was significantly affected by the type of resin cement, and bond strengths of RelyX Unicem and Panavia F2.0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts.
Collapse
Affiliation(s)
- Chang Liu
- College and Hospital of Stomatology, Jilin University, Changchun, China
| | - Hong Liu
- College and Hospital of Stomatology, Jilin University, Changchun, China
| | - Yue-Tong Qian
- Clinical Medical College, Jilin University, Changchun, China
| | - Song Zhu
- College and Hospital of Stomatology, Jilin University, Changchun, China
| | - Su-Qian Zhao
- College and Hospital of Stomatology, Jilin University, Changchun, China
| |
Collapse
|
48
|
Kadam A, Pujar M, Patil C. Evaluation of push-out bond strength of two fiber-reinforced composite posts systems using two luting cements in vitro. J Conserv Dent 2013; 16:444-8. [PMID: 24082575 PMCID: PMC3778628 DOI: 10.4103/0972-0707.117522] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2013] [Revised: 07/14/2013] [Accepted: 07/23/2013] [Indexed: 11/18/2022] Open
Abstract
Introduction: The concept of using a “post” for the restoration of teeth has been practiced to restore the endodontically treated tooth. Metallic posts have been commonly used, but their delirious effects have led to the development of fiber-reinforced materials that have overcome the limitations of metallic posts. The use of glass and quartz fibers was proposed as an alternative to the dark color of carbon fiber posts as far as esthetics was concerned. “Debonding” is the most common failure in fiber-reinforced composite type of posts. This study was aimed to compare the push-out bond strength of a self-adhesive dual-cured luting agent (RelyX U100) with a total etch resin luting agent (Variolink II) used to cement two different FRC posts. Materials and Methods: Eighty human maxillary anterior single-rooted teeth were decoronated, endodontically treated, post space prepared and divided into four groups (n = 20); Group I: D.T. light post (RTD) and Variolink II (Ivoclare vivadent), Group II: D.T. light post (RTD) and RelyX U100 (3M ESPE), Group III: Glassix post (Nordin) and Variolink II (Ivoclare vivadent) and Group IV: Glassix post (Nordin) and RelyX U100 (3M ESPE). Each root was sectioned to get slices of 2 ± 0.05-mm thickness. Push-out tests were performed using a triaxial loading frame. To express bond strength in megapascals (Mpa), load value recorded in Newton (N) was divided by the area of the bonded interface. After testing the push-out strengths, the samples were analyzed under a stereomicroscope. Results: The mean values of the push-out bond strength show that Group I and Group III had significantly higher values than Group II and Group IV. The most common mode of failure observed was adhesive between dentin and luting material and between post and luting material. Conclusions: The mean push-out bond strengths were higher for Groups I and III where Variolink II resin cement was used for luting the fiber post, which is based on the total etch adhesive approach. In most of the samples, failure was observed between cement–dentine interface, followed by post–cement interface, which shows difficulty in bonding between post–cement–dentine interface.
Collapse
Affiliation(s)
- Ajay Kadam
- Department of Conservative Dentistry and Endodontics, Tatyasaheb Kore Dental College and Research Center, New Pargaon, Kolhapur, India
| | | | | |
Collapse
|
49
|
AlEisa K, Al-Dwairi ZN, Lynch E, Lynch CD. In Vitro Evaluation of the Effect of Different Endodontic Sealers on Retentive Strength of Fiber Posts. Oper Dent 2013; 38:539-44. [DOI: 10.2341/12-414-l] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
SUMMARY
Purpose
There is limited information in the literature regarding the effect of different endodontic sealers on the bond strength of fiber posts luted with core buildup materials. The purpose of this study was to evaluate the effect of three different root canal sealers on the retentive strength of prefabricated fiber posts luted with a composite resin cement.
Materials and Methods
Fifty-four extracted single-rooted mandibular premolar teeth were prepared and randomly divided into three groups. The first two groups were obturated with gutta-percha and one of two eugenol-based root canal sealers (Endofil, Tubli-Seal). The third group (control) was obturated with gutta-percha and a resin-based root canal sealer (AH26). Prefabricated fiber posts were luted into the prepared post spaces with a composite resin cement (Multicore Flow). The pullout forces required for dislodgment of posts from their prepared post spaces were recorded. Data were collected and statistically analyzed.
Results
The AH26 group had significantly greater retentive strengths for the posts when compared with the Endofil and Tubli-Seal (eugenol-based sealers) groups (p<0.0001). There was no significant difference between the means of the retentive strengths for the Endofil and Tubli-Seal groups (p=0.745).
Conclusion
The chemical formulation of root canal sealers significantly affected the retentive strength for prefabricated fiber posts luted with a resin cement. Eugenol-based sealers significantly reduced the bond strength of prefabricated fiber posts luted with resin cement.
Collapse
Affiliation(s)
| | - ZN Al-Dwairi
- Ziad Nawaf Al-Dwairi, BDS, PhD, FIADFE, associate professor, Department of Prosthodontics, Faculty of Dentistry, Jordan University of Science and Technology, Irbid, Jordan
| | - E Lynch
- Edward Lynch, BDentSc, MA, FDS, PhD, head of dentistry, Warwick Medical School, University of Warwick, Warwick, United Kingdom
| | - CD Lynch
- Edward Lynch, BDentSc, MA, FDS, PhD, head of dentistry, Warwick Medical School, University of Warwick, Warwick, United Kingdom
| |
Collapse
|
50
|
Abstract
OBJECTIVE The aim of this study was to evaluate the effect of different core materials and post length on the fracture strength of different posts (CAD/CAM zirconia post (ZR post)) and an individually formed glass fiber reinforced composite post (FRC post). MATERIALS AND METHODS One hundred maxillary central incisors received endodontic treatment and were divided into two groups according to the post length: (1) 10 mm in length and (2) 15 mm in length (n = 50/per group). Then the specimens were randomly assigned into five sub-groups (n = 10/per group) as follows: One-piece milled zirconia post and core (group Zr), zirconia post with resin core (Biscore, Bisco) (group Zr/R), zirconia post with resin composite core (Admira, Voco) (group Zr/RC), FRC post with resin core (group F/R) and FRC post with resin composite core (group F/RC). The posts were cemented with a self-adhesive luting agent according to the manufacturer's instructions by using endo tips and light-cured for 40 s using a halogen light curing unit. Metal crowns were made for each specimen, cemented and loaded to failure. Fracture loads (N) and modes of failure were recorded. The data were analyzed using three-way analysis of variance (ANOVA) followed by Tukey's post-hoc test (p < 0.001). RESULTS Fracture strength of roots was significantly affected by the type of post material (p < 0.05) and post length (p < 0.05), but not by the type of core materials used (p = 0.078). CONCLUSION Longer zirconia posts with zirconia- or resin-based cores can be recommended as an alternative to FRC posts with resin-based cores. The fracture patterns observed in teeth restored with fiber posts were more favorable than teeth restored with zirconia posts. Clinical significance. A higher restoring success rate can be achieved by fiber posts rather than zirconia posts, since the failure mode for these posts would be restorable. Additionally, post length is a more critical factor in teeth restored with one-piece milled zirconia posts than in those restored with fiber posts.
Collapse
Affiliation(s)
- Bekir Murat Kaya
- Department of Prosthodontics, Faculty of Dentistry, Gazi University , Ankara , Turkey
| | | |
Collapse
|