Introduction of correlative light and airSEM™ microscopy imaging for tissue research under ambient conditions

Correlia: an ImageJ plug-in to co-register and visualise multimodal correlative micrographs

The correlation of different microscopic imaging techniques alongside with microanalytical methods is crucial to better understand biological processes on a subcellular level. For that, micrographs and chemical maps exhibiting both, very different spatial resolution and field-of-view but also a highly multimodal content has to be co-registered. We developed the ImageJ/Fiji plug-in Correlia that provides an environment for handling multimodal correlative microscopy data. Several linear and nonlinear registration methods using either feature or area-based similarity measures can flexibly be cascaded to align and warp 2D microscopy data sets. The registration of data sets containing light- and electron micrographs as well as chemical maps acquired by secondary-ion mass spectroscopy and energy-dispersive X-ray spectroscopy is demonstrated. Correlia is an open-source tool developed particularly for the registration and analysis of highly multimodal 2D correlative microscopy data. LAY DESCRIPTION: If a microscopic object is imaged correlatively by two or more different microscopes the acquired micrographs will have to be overlaid accurately using an image-registration software. In cases of relatively similar image content creating such an overlay is straight-forward but what if the fields-of-view and resolutions of the micrographs differ significantly? What if there are distortions in a micrograph which have to be corrected before creating an overlay? What if furthermore a chemical map shall be overlaid that merely shows regions in which a certain chemical element is present? The rapidly increasing number of applications in correlative microscopy is calling for an easy-to-use and flexible image registration software that can deal with these challenges. Having that in mind, we developed Correlia, an ImageJ/Fiji plug-in that provides an environment for handling multimodal 2D correlative microscopy data-sets. It allows for creating overlays using different registration algorithms that can flexibly be cascaded. In this paper we describe what is happening 'under the hood' and give two example data-sets from microbiology which were registered using Correlia. Correlia is open source software and available from www.ufz.de/correlia - including introductory examples, as the authors would like to encourage other scientists to process their individual correlative microscopy data using Correlia.

Calcium phosphate mineralization in bone tissues directly observed in aqueous liquid by atmospheric SEM (ASEM) without staining: microfluidics crystallization chamber and immuno-EM

The malformation and disordered remodeling of bones induce various diseases, including osteoporosis. We have developed atmospheric SEM (ASEM) to directly observe aldehyde-fixed bone tissue immersed in radical scavenger buffer without thin sectioning. The short procedure realized the observation of bone mineralization surrounded by many cells and matrices in natural aqueous buffer, decreasing the risk of changes. In osteoblast primary cultures, mineralization was visible without staining. Correlative energy dispersive X-ray spectrometry indicated the formation of calcium phosphate mineral. Fixed bone was sectioned, and the section surface was inspected by ASEM. Mineralized trabeculae of talus spongy bone were directly visible. Associated large and small cells were revealed by phosphotungstic acid staining, suggesting remodeling by bone-absorbing osteoclasts and bone-rebuilding osteoblasts. In tibia, cortical bone layer including dense grains, was bordered by many cells with protrusions. Tissue immuno-EM performed in solution for the first time and anti-cathepsin-K antibody, successfully identified osteoclasts in femur spongy bone. A microfluidics chamber fabricated on the silicon nitride film window of an ASEM dish allowed mineralization to be monitored in vitro; calcium phosphate crystals as small as 50 nm were imaged. ASEM is expected to be widely applied to study bio-mineralization and bone-remodeling, and to help diagnose bone-related diseases.

Novel Approaches for Extracellular Matrix Targeting in Disease Treatment

Extracellular matrix (ECM) macromolecules, apart from structural role for the surrounding tissue, have also been defined as crucial mediators in several cell mechanisms. The proteolytic and cross-linking cascades of ECM have fundamental importance in health and disease, which is increasingly becoming acknowledged. However, formidable challenges remain to identify the diverse and novel role of ECM molecules, especially with regard to their distinct biophysical, biochemical, and structural properties. Considering the heterogeneous, dynamic, and hierarchical nature of ECM, the characterization of 3D functional molecular view of ECM in atomic detail will be very useful for further ECM-related studies. Nowadays, the creation of a pioneer ECM multidisciplinary integrated platform in order to decipher ECM homeostasis is more possible than ever. The access to cutting-edge technologies, such as optical imaging and electron and atomic force microscopies, along with diffraction and X-ray-based spectroscopic methods can integrate spanning wide ranges of spatial and time resolutions. Subsequently, ECM image-guided site-directed proteomics can reveal molecular compositions in defined native and reconstituted ECM microenvironments. In addition, the use of highly selective ECM enzyme inhibitors enables the comparative molecular analyses within pre-classified remodeled ECM microenvironments. Mechanistic information which will be derived can be used to develop novel protein-based inhibitors for effective diagnostic and/or therapeutic modalities targeting ECM reactions within tissue microenvironment.

Cohen L, Lifshitz L, Magid Gold I, Zhang DL, Truman-Rosentsvit M, Leichtmann-Bardoogo Y, Nyska A, Addadi S, Rouault TA, Meyron-Holtz EG. Orchestrated regulation of iron trafficking proteins in the kidney during iron overload facilitates systemic iron retention

The exact route of iron through the kidney and its regulation during iron overload are not completely elucidated. Under physiologic conditions, non-transferrin and transferrin bound iron passes the glomerular filter and is reabsorbed through kidney epithelial cells, so that hardly any iron is found in the urine. To study the route of iron reabsorption through the kidney, we analyzed the location and regulation of iron metabolism related proteins in kidneys of mice with iron overload, elicited by iron dextran injections. Transferrin Receptor 1 was decreased as expected, following iron overload. In contrast, the multi-ligand hetero-dimeric receptor-complex megalin/cubilin, which also mediates the internalization of transferrin, was highly up-regulated. Moreover, with increasing iron, intracellular ferritin distribution shifted in renal epithelium from an apical location to a punctate distribution throughout the epithelial cells. In addition, in contrast to many other tissues, the iron exporter ferroportin was not reduced by iron overload in the kidney. Iron accumulated mainly in interstitial macrophages, and more prominently in the medulla than in the cortex. This suggests that despite the reduction of Transferrin Receptor 1, alternative pathways may effectively mediate re-absorption of iron that cycles through the kidney during parenterally induced iron-overload. The most iron consuming process of the body, erythropoiesis, is regulated by the renal erythropoietin producing cells in kidney interstitium. We propose, that the efficient re-absorption of iron by the kidney, also during iron overload enables these cells to sense systemic iron and regulate its usage based on the systemic iron state.

Correlative imaging reveals physiochemical heterogeneity of microcalcifications in human breast carcinomas

Microcalcifications (MCs) are routinely used to detect breast cancer in mammography. Little is known, however, about their materials properties and associated organic matrix, or their correlation to breast cancer prognosis. We combine histopathology, Raman microscopy, and electron microscopy to image MCs within snap-frozen human breast tissue and generate micron-scale resolution correlative maps of crystalline phase, trace metals, particle morphology, and organic matrix chemical signatures within high grade ductal carcinoma in situ (DCIS) and invasive cancer. We reveal the heterogeneity of mineral-matrix pairings, including punctate apatitic particles (<2 µm) with associated trace elements (e.g., F, Na, and unexpectedly Al) distributed within the necrotic cores of DCIS, and both apatite and spheroidal whitlockite particles in invasive cancer within a matrix containing spectroscopic signatures of collagen, non-collagen proteins, cholesterol, carotenoids, and DNA. Among the three DCIS samples, we identify key similarities in MC morphology and distribution, supporting a dystrophic mineralization pathway. This multimodal methodology lays the groundwork for establishing MC heterogeneity in the context of breast cancer biology, and could dramatically improve current prognostic models.

Matrix metalloproteinase collagenolysis in health and disease

The proteolytic processing of collagen (collagenolysis) is critical in development and homeostasis, but also contributes to numerous pathologies. Mammalian interstitial collagenolytic enzymes include members of the matrix metalloproteinase (MMP) family and cathepsin K. While MMPs have long been recognized for their ability to catalyze the hydrolysis of collagen, the roles of individual MMPs in physiological and pathological collagenolysis are less defined. The use of knockout and mutant animal models, which reflect human diseases, has revealed distinct collagenolytic roles for MT1-MMP and MMP-13. A better understanding of temporal and spatial collagen processing, along with the knowledge of the specific MMP involved, will ultimately lead to more effective treatments for cancer, arthritis, cardiovascular conditions, and infectious diseases. This article is part of a Special Issue entitled: Matrix Metalloproteinases edited by Rafael Fridman.

Characterization of Sulfur and Nanostructured Sulfur Battery Cathodes in Electron Microscopy Without Sublimation Artifacts

Lithium sulfur (Li-S) batteries have the potential to provide higher energy storage density at lower cost than conventional lithium ion batteries. A key challenge for Li-S batteries is the loss of sulfur to the electrolyte during cycling. This loss can be mitigated by sequestering the sulfur in nanostructured carbon-sulfur composites. The nanoscale characterization of the sulfur distribution within these complex nanostructured electrodes is normally performed by electron microscopy, but sulfur sublimates and redistributes in the high-vacuum conditions of conventional electron microscopes. The resulting sublimation artifacts render characterization of sulfur in conventional electron microscopes problematic and unreliable. Here, we demonstrate two techniques, cryogenic transmission electron microscopy (cryo-TEM) and scanning electron microscopy in air (airSEM), that enable the reliable characterization of sulfur across multiple length scales by suppressing sulfur sublimation. We use cryo-TEM and airSEM to examine carbon-sulfur composites synthesized for use as Li-S battery cathodes, noting several cases where the commonly employed sulfur melt infusion method is highly inefficient at infiltrating sulfur into porous carbon hosts.

Atomically Thin Graphene Windows That Enable High Contrast Electron Microscopy without a Specimen Vacuum Chamber

Scanning electron microscopes (SEMs) require a high vacuum environment to generate and shape an electron beam for imaging; however, the vacuum conditions greatly limit the nature of specimens that can be examined. From a purely scattering physics perspective, it is not necessary to place the specimen inside the vacuum chamber-the mean free paths (MFPs) for electron scattering in air at typical SEM beam voltages are 50-100 μm. This is the idea behind the airSEM, which removes the specimen vacuum chamber from the SEM and places the sample in air. The thickness of the gas layer is less than a MFP from an electron-transparent window to preserve the shape and resolution of the incident beam, resulting in comparable imaging quality to an all-vacuum SEM. Present silicon nitride windows scatter far more strongly than the air gap and are currently the contrast and resolution limiting factor in the airSEM. Graphene windows have been used previously to wrap or seal samples in vacuum for imaging. Here we demonstrate the use of a robust bilayer graphene window for sealing the electron optics from the room environment, providing an electron transparent window with only a 2% drop in contrast. There is a 5-fold-increase in signal/noise ratio for imaging compared to multi-MFP-thick silicon nitride windows, enabling high contrast in backscattered, transmission, and surface imaging modes for the new airSEM geometry.

Study of Osteoclast Adhesion to Cortical Bone Surfaces: A Correlative Microscopy Approach for Concomitant Imaging of Cellular Dynamics and Surface Modifications

Bone remodeling relies on the coordinated functioning of osteoblasts, bone-forming cells, and osteoclasts, bone-resorbing cells. The effects of specific chemical and physical bone features on the osteoclast adhesive apparatus, the sealing zone ring, and their relation to resorption functionality are still not well-understood. We designed and implemented a correlative imaging method that enables monitoring of the same area of bone surface by time-lapse light microscopy, electron microscopy, and atomic force microscopy before, during, and after exposure to osteoclasts. We show that sealing zone rings preferentially develop around surface protrusions, with lateral dimensions of several micrometers, and ∼1 μm height. Direct overlay of sealing zone rings onto resorption pits on the bone surface shows that the rings adapt to pit morphology. The correlative procedure presented here is noninvasive and performed under ambient conditions, without the need for sample labeling. It can potentially be applied to study various aspects of cell-matrix interactions.

Periostin Deficiency Causes Severe and Lethal Lung Injury in Mice With Bleomycin Administration

Pulmonary capillary leakage followed by influx of blood fluid into the air space of lung alveoli is a crucial step in the progression of acute lung injury (ALI). This influx is due to increased permeability of the alveolar-capillary barrier. The extracellular matrix (ECM) between the capillary and the epithelium would be expected to be involved in prevention of the influx; however, the role of the ECM remains to be addressed. Here, we show that the ECM architecture organized by periostin, a matricellular protein, plays a pivotal role in the survival of bleomycin-exposed mice. Periostin was localized in the alveolar walls. Although periostin-null mice displayed no significant difference in lung histology and air-blood permeability, they exhibited early lethality in a model of bleomycin-induced lung injury, compared with their wild-type counterparts. This early lethality may have been due to increased pulmonary leakage of blood fluid into the air space in the bleomycin-exposed periostin-null mice. These results suggest that periostin in the ECM architecture prevents pulmonary leakage of blood fluid, thus increasing the survival rate in mice with ALI. Thus, this study provides an evidence for the protective role of the ECM architecture in the lung alveoli.

Correlated light and electron microscopy: ultrastructure lights up!

Microscopy has gone hand in hand with the study of living systems since van Leeuwenhoek observed living microorganisms and cells in 1674 using his light microscope. A spectrum of dyes and probes now enable the localization of molecules of interest within living cells by fluorescence microscopy. With electron microscopy (EM), cellular ultrastructure has been revealed. Bridging these two modalities, correlated light microscopy and EM (CLEM) opens new avenues. Studies of protein dynamics with fluorescent proteins (FPs), which leave the investigator 'in the dark' concerning cellular context, can be followed by EM examination. Rare events can be preselected at the light microscopy level before EM analysis. Ongoing development-including of dedicated probes, integrated microscopes, large-scale and three-dimensional EM and super-resolution fluorescence microscopy-now paves the way for broad CLEM implementation in biology.

Microscopy techniques for investigating the control of organic constituents on biomineralization

This article addresses recent advances in the application of microscopy techniques to characterize crystallization processes as they relate to biomineralization and bio-inspired materials synthesis. In particular, we focus on studies aimed at revealing the role organic macromolecules and functionalized surfaces play in modulating the mechanisms of nucleation and growth. In nucleation studies, we explore the use of methods such as in situ transmission electron microscopy, atomic force microscopy, and cryogenic electron microscopy to delineate formation pathways, phase stabilization, and the competing effects of free energy and kinetic barriers. In growth studies, emphasis is placed on understanding the interactions of macromolecular constituents with growing crystals and characterization of the internal structures of the resulting composite crystals using techniques such as electron tomography, atom probe tomography, and vibrational spectromicroscopy. Examples are drawn from both biological and bio-inspired synthetic systems.

Nanoscale analysis of unstained biological specimens in water without radiation damage using high-resolution frequency transmission electric-field system based on FE-SEM

Scanning electron microscopy (SEM) has been widely used to examine biological specimens of bacteria, viruses and proteins. Until now, atmospheric and/or wet biological specimens have been examined using various atmospheric holders or special equipment involving SEM. Unfortunately, they undergo heavy radiation damage by the direct electron beam. In addition, images of unstained biological samples in water yield poor contrast. We recently developed a new analytical technology involving a frequency transmission electric-field (FTE) method based on thermionic SEM. This method is suitable for high-contrast imaging of unstained biological specimens. Our aim was to optimise the method. Here we describe a high-resolution FTE system based on field-emission SEM; it allows for imaging and nanoscale examination of various biological specimens in water without radiation damage. The spatial resolution is 8 nm, which is higher than 41 nm of the existing FTE system. Our new method can be easily utilised for examination of unstained biological specimens including bacteria, viruses and protein complexes. Furthermore, our high-resolution FTE system can be used for diverse liquid samples across a broad range of scientific fields, e.g. nanoparticles, nanotubes and organic and catalytic materials.