Construction of porous cationic frameworks by crosslinking polyhedral oligomeric silsesquioxane units with N-heterocyclic linkers

Synthesis of a Novel Zwitterionic Hypercrosslinked Polymer for Highly Efficient Iodine Capture from Water

Cationic porous organic polymers have a unique advantage in removing radioactive iodine from the aqueous phase because iodine molecules exist mainly in the form of iodine-containing anions. However, halogen anions will inevitably be released into water during the ion-exchange process. Herein, we reported a novel and easy-to-construct zwitterionic hypercrosslinked polymer (7AIn-PiP)-containing cationic pyridinium-type group, uncharged pyridine-type group, pyrrole-type group, and even an electron-rich phenyl group, which in synergy effectively removed 94.2% (456 nm) of I2 from saturated I2 aqueous solution within 30 min, surpassing many reported iodine adsorbents. Moreover, an I2 adsorption efficiency of ~95% can still be achieved after three cyclic evaluations, indicating a good recycling performance. More importantly, a unique dual 1,3-dipole was obtained and characterized by 1H/13C NMR, HRMS, and FTIR, correlating with the structure of 7AIn-PiP. In addition, the analysis of adsorption kinetics and the characterization of I2@7AIn-PiP indicate that the multiple binding sites simultaneously contribute to the high affinity towards iodine species by both physisorption and chemisorption. Furthermore, an interesting phenomenon of inducing the formation of HIO2 in unsaturated I2 aqueous solution was discovered and explained. Overall, this work is of great significance for both material and radiation protection science.

Silsesquioxanes in the Cosmetics Industry-Applications and Perspectives

The rising demand for innovative and sophisticated personal care products is a driving factor for manufacturers to obtain new formulations that will fulfill the customers' preferences. In recent years, silsesquioxanes have attracted the attention of the cosmetics industry. These compounds have been proposed to be used in novel cosmetic formulations as emollient, dispersant, and viscosity modifiers. Therefore, this publication aims to review the main important aspects of polyhedral oligosilsesquioxanes as ingredients of personal care formulations, taking into consideration different types of products. The methods of obtaining these compounds were also presented. Additionally, the detailed analysis of patents dedicated to the application of silsesquioxanes in cosmetic formulations was also performed.

Preparation of Carbon nanotubes and Polyhedral oligomeric-Reinforced Molecularly Imprinted Polymer Composites for Drug Delivery of Gallic acid

In this paper, an enhanced imprinting effect of utilizing single wall carbon nanotubes (SWCNT) and polyhedral oligomeric silsesquioxanes (POSS) was suggested to improve drug delivery. The combination of 1-butyl-3-methylimidazoliumtetrafluoroborate ([BMIM]BF₄), tetrahydrofuran (THF) and choline chloride-ethylene glycol (ChCl / EG) were used as a ternary porogen to prepare molecularly imprinted polymer (MIPs) doped with SWCNT and POSS. In the presence of gallic acid (GAL), 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EDMA) was functional monomer and crosslinker, respectively. The structure and morphological parameters of the MIP composite, such as surface area and pore size distribution, were also measured. In the studies of in vitro releases, superior controlled release characteristics can be achieved due to the enhanced imprinting effect of the MIPs doped with POSS and SWCNT. In vivo release studies showed that the POSS-SWCNT MIP had the maximum plasma concentration after 4 hours. Compared with the control MIPs and NIP, the POSS-SWCNT MIP displayed a maximum AUC_0-9 of 544.73 (ng h mL^-1), while only 327.48, 212.91, 230.35 and 275.13 (ng h mL^-1) for the POSS MIP, SWCNT MIP, MIP and POSS-SWCNT NIP, respectively.

POSS and imidazolium-constructed ionic porous hypercrosslinked polymers with multiple active sites for synergistic catalytic CO2 transformation

In this work, we reported a facile one-pot approach to construct polyhedral oligomeric silsesquioxane (POSS) and imidazolium-based ionic porous hypercrosslinked polymers (denoted as iPHCPs) with multiple active sites towards efficient catalytic conversion of carbon dioxide (CO₂) to high value-added cyclic carbonates. The targeted iPHCPs were synthesized from a rigid molecular building block octavinylsilsesquioxane (VPOSS) and a newly-designed phenyl-based imidazolium ionic crosslinker through the AlCl₃-catalyzed Friedel-Crafts reaction. The desired multiple active sites come from the mixed anions including free Cl^- and Br^- anions, and in situ formed Lewis acidic metal-halogen complex anions [AlCl₃Br]^- within imidazolium moieties and POSS-derived Si-OH groups during the synthetic process. The typical polymer iPHCP-12 possesses a hierarchical micro-/mesoporous structure with a high surface area up to 537 m² g^-1 and shows a fluffy nano-morphology. By virtue of the co-existence of free nucleophilic Cl^- and Br^- anions, the metal complex anion [AlCl₃Br]^- with both electrophilic and nucleophilic characters and electrophilic hydrogen bond donor (HBD) Si-OH groups, iPHCP-12 is regarded as an efficient recyclable heterogeneous catalyst for synergistic catalytic conversion of CO₂ with various epoxides into cyclic carbonates under mild conditions. The present work provides a succinct one-pot strategy to construct task-specific ionic porous hypercrosslinked polymers from easily available modules for the targeted catalytic applications.

Hybrid Xerogels: Study of the Sol-Gel Process and Local Structure by Vibrational Spectroscopy

The properties of hybrid silica xerogels obtained by the sol-gel method are highly dependent on the precursor and the synthesis conditions. This study examines the influence of organic substituents of the precursor on the sol-gel process and determines the structure of the final materials in xerogels containing tetraethyl orthosilicate (TEOS) and alkyltriethoxysilane or chloroalkyltriethoxysilane at different molar percentages (RTEOS and ClRTEOS, R = methyl [M], ethyl [E], or propyl [P]). The intermolecular forces exerted by the organic moiety and the chlorine atom of the precursors were elucidated by comparing the sol-gel process between alkyl and chloroalkyl series. The microstructure of the resulting xerogels was explored in a structural theoretical study using Fourier transformed infrared spectroscopy and deconvolution methods, revealing the distribution of (SiO)₄ and (SiO)₆ rings in the silicon matrix of the hybrid xerogels. The results demonstrate that the alkyl chain and the chlorine atom of the precursor in these materials determines their inductive and steric effects on the sol-gel process and, therefore, their gelation times. Furthermore, the distribution of (SiO)₄ and (SiO)₆ rings was found to be consistent with the data from the X-ray diffraction spectra, which confirm that the local periodicity associated with four-fold rings increases with higher percentage of precursor. Both the sol-gel process and the ordered domains formed determine the final structure of these hybrid materials and, therefore, their properties and potential applications.

Novel Organochlorinated Xerogels: From Microporous Materials to Ordered Domains

Hybrid silica xerogels combine the properties of organic and inorganic components in the same material, making them highly promising and versatile candidates for multiple applications. They can be tailored for specific purposes through chemical modifications, and the consequent changes in their structures warrant in-depth investigation. We describe the synthesis of three new series of organochlorinated xerogels prepared by co-condensation of tetraethyl orthosilicate (TEOS) and chloroalkyltriethoxysilane (ClRTEOS; R = methyl [M], ethyl [E], or propyl [P]) at different molar ratios. The influence of the precursors on the morphological and textural properties of the xerogels was studied using ²⁹Si NMR (Nuclear Magnetic Resonance), FTIR (Fourier-Transform Infrared Spectroscopy), N₂, and CO₂ adsorption, XRD (X-ray Diffraction), and FE-SEM (Field-Emission Scanning Electron Microscopy). The structure and morphology of these materials are closely related to the nature and amount of the precursor, and their microporosity increases proportionally to the molar percentage of ClRTEOS. In addition, the influence of the chlorine atom was investigated through comparison with their non-chlorinated analogues (RTEOS, R = M, E, or P) prepared in previous studies. The results showed that a smaller amount of precursor was needed to detect ordered domains (ladders and T₈ cages) in the local structure. The possibility of coupling self-organization with tailored porosity opens the way to novel applications for this type of organically modified silicates.

K. R. D, Shanmugan S. A superhydrophobic covalent zeolitic imidazolate framework-polyhedral oligomeric silsesquioxane hybrid material as a highly efficient and reusable sorbent for organic solvents

A robust, fluorine-free, superhydrophobic ZIF-POSS hybrid material is prepared by a post-covalent reaction between ZIF-90 and POSS-NH₂ via imine bond formation. The ZIF-POSS material is highly effective and reusable sorbent for organic solvents.

Porosity-Induced Selective Sensing of Iodide in Aqueous Solution by a Fluorescent Imidazolium-Based Ionic Porous Framework

Developing a chemosensor for rapid, sensitive, and visual detection of iodide (I^-) by a simple synthetic strategy is still challenging. Herein, we report a highly efficient iodide sensor by simply introducing ionic imidazolium groups into the porous network. This sensor, that is, a fluorescent ionic porous framework (IPF), was prepared by the quaternization reaction of octa((benzylchloride)ethenyl)silsesquioxane and 1,4-bis(1H-imidazole-1-yl)benzene and exhibited moderate porosity with a Brunauer-Emmett-Teller surface area of 379 m² g^-1 and blue fluorescence when excited by UV light. The IPF suspension in water can detect I^- with high sensitivity and selectivity among various anions and quick response by fluorescence quenching. In contrast to no response toward I^- by the linear model compound and the enhanced sensing performance with an increment of porosity, this finding indicates that the porosity of IPF is important for the detection of I^- and an inducement of the sensing process. A fluorescent paper sensor was further developed, which shows high efficiency for the visual detection of I^- similar to the abovementioned sensor, suggesting its potential in convenient and on-site sensing of I^-. In addition, the paper sensor is recyclable with a remarkable fluorescence resuming ratio of 83% after 10 times cycle detection. Moreover, the developed sensor is used for the analysis of real samples. This work represents the first example of the detection of I^- by an ionic porous polymer. Compared with conventional iodide sensors, the present sensor does not require unique structures to form the pseudocavity during sensing I^- and can easily achieve high efficiency by incorporating ionic hydrogen bond donors into the porous network, indicating the importance of porosity and the feasibility of replacing the pseudocavity with a real cavity (or pore). More iodide sensors with high efficiency can be designed and fabricated by this novel and simple strategy.

Strategies for Incorporating Catalytically Active Polyoxometalates in Metal-Organic Frameworks for Organic Transformations

Polyoxometalates (POMs) can benefit from immobilization on solid supports to overcome their difficulty in processability and stability. Among the reported solid supports, metal-organic frameworks (MOFs) offer a crystalline, versatile platform for depositing highly active POMs. The combination of these structures can at times benefit from the combined reactivity of both the POM and MOF, sometimes synergistically, to improve catalysis while balancing desirable properties like porosity, substrate diffusion, or stability. In this Review, we survey the strategies for immobilizing POMs within MOF structures, with an emphasis on how physical and catalytic properties of the parent materials are affected in the composite when employed in organic transformations.

POSS nanostructures in catalysis

In this review we highlight the use of appealing POSS-based nanostructures for both homogeneous and heterogeneous catalytic applications.

Two-in-one: construction of hydroxyl and imidazolium-bifunctionalized ionic networks in one-pot toward synergistic catalytic CO2 fixation

Two-in-one hydroxyl-incorporated imidazolium ionic network was constructed in one-pot quaternization for enhancing synergistic catalytic conversion of CO₂ under mild conditions.

Facile synthesis of crystalline viologen-based porous ionic polymers with hydrogen-bonded water for efficient catalytic CO2 fixation under ambient conditions

In this work, we report a series of crystalline viologen-based porous ionic polymers (denoted VIP-X, X = Cl or Br), that have in situ formed dicationic viologens paired with halogen anions and intrinsic hydrogen-bonded water molecules, towards metal-free heterogeneous catalytic conversion of carbon dioxide (CO₂) under mild conditions. The targeted VIP-X materials were facilely constructed via the Menshutkin reaction of 4,4′-bipyridine with 4,4′-bis(bromomethyl)biphenyl (BCBMP) or 4,4′-bis(chloromethyl)biphenyl (BBMBP) monomers. Their crystalline and porous structures, morphological features and chemical structures and compositions were fully characterized by various advanced techniques. The optimal catalyst VIP-Br afforded a high yield of 99% in the synthesis of cyclic carbonate by CO₂ cycloaddition with epichlorohydrin under atmospheric pressure (1 bar) and a low temperature (40 °C), while other various epoxides could be also converted into cyclic carbonates under mild conditions. Moreover, the catalyst VIP-Br could be separated easily and reused with good stability. The remarkable catalytic performance could be attributed to the synergistic effect of the enriched Br⁻ anions and available hydrogen bond donors –OH groups coming from H-bonded water molecules.

Viologen-based porous ionic polymers with halogen anions and hydrogen-bonded water were constructed for efficient catalytic CO₂ fixation under mild conditions.

Metalated-bipyridine-based porous hybrid polymers with POSS-derived Si–OH groups for synergistic catalytic CO2 fixation

ZnBr₂ metalated-bipyridine porous hybrid polymers with POSS-derived Si–OH as “all-in-one” heterogeneous catalysts for synergistic catalytic CO₂ fixation.

Diphenylphosphine-Substituted Ferrocene/Silsesquioxane-Based Hybrid Porous Polymers as Highly Efficient Adsorbents for Water Treatment

The study describes the synthesis of two porous hybrid polymers (abbreviated as DPPF-HPP and DPPOF-HPP) from the Friedel-Crafts reaction of octavinylsilsesquioxane with 1,1'-bis(diphenylphosphine)ferrocene (DPPF) and 1,1'-bis(diphenylphosphine oxide)ferrocene (DPPOF), respectively. DPPF-HPP and DPPOF-HPP possess surface areas of about 890 and 780 m² g^-1, respectively, as well as similar pore structures of the coexisting micropores and mesopores. They are excellent materials for high adsorption of different dyes with adsorption capacities of 2280 mg g^-1 for Congo Red and 1440 mg g^-1 for Crystal Violet. DPPF-HPP also shows a strong affinity to adsorb Hg²⁺ ions (300 mg g^-1). These materials show no sign of degradation under repeated cycles and thus offer potential for wastewater treatment.

Hitherto unknown eight-connected frameworks formed from A4B4O12 metal organophosphate heterocubanes

Modulation of a functional group on the distal part of a phosphate ester has been prudently exploited to selectively switch between the formation of D4R SBUs and 3-D framework structures. While amino substitution at the para-position of an aryl phosphate results in the isolation of tetra-amino functionalized discrete D4R zinc phosphate or its 4-connected 3-D framework, the introduction of an acetylamino substituent leads to a single-step assembly of a rare eight-connected 3-D framework solid.

Bio-inspired creation of heterogeneous reaction vessels via polymerization of supramolecular ion pair

Precise control of the outer-sphere environment around the active sites of heterogeneous catalysts to modulate the catalytic outcomes has long been a challenge. Here, we demonstrate how this can be fulfilled by encapsulating catalytic components into supramolecular capsules, used as building blocks for materials synthesis, whereby the microenvironment of each active site is tuned by the assembled wall. Specifically, using a cationic template equipped with a polymerizable functionality, anionic ligands can be encapsulated by ion pair-directed supramolecular assembly, followed by construction into porous frameworks. The hydrophilic ionic wall enables reactions to be achieved in water that usually requires organic solvents and also facilitates the enrichment of the substrate into the hydrophobic pocket, leading to superior catalytic performances as demonstrated by the industrially relevant hydroformylation. Remarkably, the formation of the supramolecular assembly and catalyst encapsulation further engenders reaction selectivity, which reaches an even greater extent after construction of the porous framework.

Tuning the environment of catalytic active sites may improve the selectivity of heterogeneous catalysts. Here, the authors modify the outer-sphere environment of active sites in hydroformylation catalysts by encapsulating the active sites in nanovessels formed by ion pair-directed supramolecular assembly.

Ionized aromatization approach to charged porous polymers as exceptional absorbents

One-step ionized aromatization approach to cyclopropenium cation-based porous polymers with ultra-high selective capture of anionic dyes in water.

Chemically stable ionic viologen-organic network: an efficient scavenger of toxic oxo-anions from water

Detoxification of water has been demonstrated with a viologen-based cationic organic network (compound-1), which was stable not only in water, but also in acidic and basic media. The presence of free exchangeable Cl- ions inside the network of compound-1 and a high physiochemical stability of the materials offered a suitable scope for the capture of hazardous anionic pollutants from water. Rapid removal of the toxic water pollutant and carcinogenic chromate (CrO4 2-) from water was shown with compound-1. Furthermore, the oxo-anion of the radioactive isotope of technetium (99Tc), i.e. the TcO4 - ion, also counts as a toxic water pollutant and by using surrogate anions (MnO4 - and ReO4 -), a model capture study was performed. Notably, compound-1 showed high capacity values for each of the oxo-anions and these were comparable to some of the well-performing compounds reported in the literature. Furthermore, to check the real time aspect, removal of all of the aforementioned anions from water was demonstrated, even in the presence of other concurrent anions.

Cationic Zn-Porphyrin Polymer Coated onto CNTs as a Cooperative Catalyst for the Synthesis of Cyclic Carbonates

The development of solid catalysts containing multiple active sites that work cooperatively is very attractive for biomimetic catalysis. Herein, we report the synthesis of bifunctional catalysts by supporting cationic porphyrin-based polymers on carbon nanotubes (CNTs) using the direct reaction of 5,10,15,20-tetrakis(4-pyridyl)porphyrin zinc(II), di(1H-imidazol-1-yl)methane, and 1,4-bis(bromomethyl)benzene in the presence of CNTs. The bifunctional catalysts could efficiently catalyze the cycloaddition reaction of epoxides and CO₂ under solvent-free conditions with porphyrin zinc(II) as the Lewis acid site and a bromine anion as a nucleophilic agent working in a cooperative way. Furthermore, a relative amount of porphyrin zinc(II) and quaternary ammonium bromide could be facilely adjusted for facilitating cooperative behavior. The bifunctional catalyst with a TOF up to 2602 h^-1 is much more active than the corresponding homogeneous counterpart and is one of the most active heterogeneous catalysts ever reported under cocatalyst-free conditions. The high activity is mainly attributed to the enhanced cooperation effect of the bifunctional catalyst. With a wide substrate scope, the bifunctional catalyst could be stably recycled. This work demonstrates a new approach for the generation of a cooperative activation effect for solid catalysts.

Controlled formation of ordered coordination polymeric networks using silsesquioxane building blocks

In this report, we synthesized ordered coordination polymers using polyhedral oligomeric silsesquioxanes (POSS) as a building block. A POSS with eight carboxylic terminals was coordinated with copper ions at various temperatures, forming polymeric networks. This novel coordination polymer has a long-range ordered structure.

Constructing POSS and viologen-linked porous cationic frameworks induced by the Zincke reaction for efficient CO2 capture and conversion

POSS and viologen-linked porous cationic frameworks were constructed via the Zincke reaction towards efficient CO₂ capture and conversion under ambient conditions.

Polyhedral Oligomeric Silsesquioxane (POSS) Bearing Glyoxylic Aldehyde as Clickable Platform Towards Multivalent Conjugates

The straightforward access to octafunctional "cubic" silsesquioxane platform grafter with pendant glyoxylic aldehydes is described. This clickable hybrid platform readily reacts with oxyamine or hydrazide compounds to provide, respectively, oxime and acylhydrazone conjugates, thereby offering a new and effective access from which one can elaborate multivalent systems for the targeting of biomolecules of interest.

Viologen-Based Conjugated Covalent Organic Networks via Zincke Reaction

Morphology influences the functionality of covalent organic networks and determines potential applications. Here, we report for the first time the use of Zincke reaction to fabricate, under either solvothermal or microwave conditions, a viologen-linked covalent organic network in the form of hollow particles or nanosheets. The synthesized materials are stable in acidic, neutral, and basic aqueous solutions. Under basic conditions, the neutral network assumes radical cationic character without decomposing or changing structure. Solvent polarity and heating method determine product morphology. Depending upon solvent polarity, the resulting polymeric network forms either uniform self-templated hollow spheres (HS) or hollow tubes (HT). The spheres develop via an inside-out Ostwald ripening mechanism. Interestingly, microwave conditions and certain solvent polarities result in the formation of a robust covalent organic gel framework (COGF) that is organized in nanosheets stacked several layers thick. In the gel phase, the nanosheets are crystalline and form honeycomb lattices. The use of the Zincke reaction has previously been limited to the synthesis of small viologen molecules and conjugated viologen oligomers. Its application here expands the repertoire of tools for the fabrication of covalent organic networks (which are usually prepared by dynamic covalent chemistry) and for the synthesis of viologen-based materials. All three materials-HT, HS, and COGF-serve as efficient adsorbents of iodine due to the presence of the cationic viologen linker and, in the cases of HT and HS, permanent porosity.

Charged Covalent Triazine Frameworks for CO2 Capture and Conversion

The quest for the development of new porous materials addressing both CO₂ capture from various sources and its conversion into useful products is a very active research area and also critical in order to develop a more sustainable and environmentally-friendly society. Here, we present the first charged covalent triazine framework (cCTF) prepared by simply heating nitrile functionalized dicationic viologen derivatives under ionothermal reaction conditions using ZnCl₂ as both solvent and trimerization catalyst. It has been demonstrated that the surface area, pore volume/size of cCTFs can be simply controlled by varying the synthesis temperature and the ZnCl₂ content. Specifically, increasing the reaction temperature led to controlled increase in the mesopore content and facilitated the formation of hierarchical porosity, which is critical to ensure efficient mass transport within porous materials. The resulting cCTFs showed high specific surface areas up to 1247 m² g^-1, and high physicochemical stability. The incorporation of ionic functional moieties to porous organic polymers improved substantially their CO₂ affinity (up to 133 mg g^-1, at 1 bar and 273 K) and transformed them into hierarchically porous organocatalysts for CO₂ conversion. More importantly, the ionic nature of cCTFs, homogeneous charge distribution together with hierarchical porosity offered a perfect platform for the catalytic conversion of CO₂ into cyclic carbonates in the presence of epoxides through an atom economy reaction in high yields and exclusive product selectivity. These results clearly demonstrate the promising aspect of incorporation of charged units into the porous organic polymers for the development of highly efficient porous organocatalysts for CO₂ capture and fixation.

Trends and challenges for microporous polymers

Recent trends and challenges for the emerging materials class of microporous polymers are reviewed. See the main article for graphical abstract image credits.

Solid-state dynamics and single-crystal to single-crystal structural transformations in octakis(3-chloropropyl)octasilsesquioxane and octavinyloctasilsesquioxane

Thermally induced formation of symmetric crystal lattices in functional POSS proceeds via different mechanisms and results in unique reversible phenomena.

Synthesis of diblock copolymers consisting of POSS-containing random methacrylate copolymers and polystyrene and their cross-linked microphase-separated structure via fluoride ion-mediated cage scrambling

POSS-containing diblock copolymers were synthesized for the formation of cross-linked microphase-separated structure.

Organosilica hybrid nanomaterials with a high organic content: syntheses and applications of silsesquioxanes

Organic-inorganic hybrid materials garner properties from their organic and inorganic matrices as well as synergistic features, and therefore have recently attracted much attention at the nanoscale. Non-porous organosilica hybrid nanomaterials with a high organic content such as silsesquioxanes (R-SiO_1.5, with R organic groups) and bridged silsesquioxanes (O_1.5Si-R-SiO_1.5) are especially attractive hybrids since they provide 20 to 80 weight percent of organic functional groups in addition to the known chemistry and stability of silica. In the organosilica family, silsesquioxanes (R-SiO_1.5) stand between silicas (SiO₂) and silicones (R₂SiO), and are variously called organosilicas, ormosil (organically-modified silica), polysilsesquioxanes and silica hybrids. Herein, we comprehensively review non-porous silsesquioxane and bridged silsesquioxane nanomaterials and their applications in nanomedicine, electro-optics, and catalysis.

Porous polymers bearing functional quaternary ammonium salts as efficient solid catalysts for the fixation of CO2 into cyclic carbonates

A series of porous polymers bearing functional quaternary ammonium salts were solvothermally synthesized through the free radical copolymerization of divinylbenzene (DVB) and functionalized quaternary ammonium salts. The obtained polymers feature highly cross-linked matrices, large surface areas, and abundant halogen anions. These polymers were evaluated as heterogeneous catalysts for the synthesis of cyclic carbonates from epoxides and CO2 in the absence of co-catalysts and solvents. The results revealed that the synergistic effect between the functional hydroxyl groups and the halide anion Br(-) afforded excellent catalytic activity to cyclic carbonates. In addition, the catalyst can be easily recovered and reused for at least five cycles without significant loss in activity.

Nanoporous ionic organic networks: from synthesis to materials applications

This review highlights the recent progress made in the study of the synthesis of nanoporous ionic organic networks (NIONs) and their promising applications.

Porous cationic polymers: the impact of counteranions and charges on CO2capture and conversion

Porous cationic polymers (PCPs) with surface areas up to 755 m²g⁻¹bearing positively charged viologen units in their backbones and different counteranions have been prepared.

Diazapyrenium-based porous cationic polymers for colorimetric amine sensing and capture from CO2 scrubbing conditions

Supramolecular approach to the highly efficient sensing and capture of aliphatic amines.

Ionic self-assembly affords mesoporous ionic networks by crosslinking linear polyviologens with polyoxometalate clusters

Polyoxometalate-crosslinked mesoporous ionic networks were constructed by ionic self-assembly of linear cationic polyviologens with PMoV clusters, acting as highly efficient heterogeneous catalysts for the conversion of HMF to DFF with ambient O₂.

Strongly coupled Mn3O4–porous organic polymer hybrid: a robust, durable and potential nanocatalyst for alcohol oxidation reactions

Porous organic polymer encapsulated Mn₃O₄ nanoneedles exhibited catalytic activity in the oxidation of diverse alcohols with tremendous recyclability.