A simulation-based breeding design that uses whole-genome prediction in tomato

Low-density SNP markers with high prediction accuracy of genomic selection for bacterial wilt resistance in tomato

Bacterial wilt (BW) is a soil-borne disease that leads to severe damage in tomato. Host resistance against BW is considered polygenic and effective in controlling this destructive disease. In this study, genomic selection (GS), which is a promising breeding strategy to improve quantitative traits, was investigated for BW resistance. Two tomato collections, TGC1 (n = 162) and TGC2 (n = 191), were used as training populations. Disease severity was assessed using three seedling assays in each population, and the best linear unbiased prediction (BLUP) values were obtained. The 31,142 SNP data were generated using the 51K Axiom array™ in the training populations. With these data, six GS models were trained to predict genomic estimated breeding values (GEBVs) in three populations (TGC1, TGC2, and combined). The parametric models Bayesian LASSO and RR-BLUP resulted in higher levels of prediction accuracy compared with all the non-parametric models (RKHS, SVM, and random forest) in two training populations. To identify low-density markers, two subsets of 1,557 SNPs were filtered based on marker effects (Bayesian LASSO) and variable importance values (random forest) in the combined population. An additional subset was generated using 1,357 SNPs from a genome-wide association study. These subsets showed prediction accuracies of 0.699 to 0.756 in Bayesian LASSO and 0.670 to 0.682 in random forest, which were higher relative to the 31,142 SNPs (0.625 and 0.614). Moreover, high prediction accuracies (0.743 and 0.702) were found with a common set of 135 SNPs derived from the three subsets. The resulting low-density SNPs will be useful to develop a cost-effective GS strategy for BW resistance in tomato breeding programs.

Assessing the Potential for Genome-Assisted Breeding in Red Perilla Using Quantitative Trait Locus Analysis and Genomic Prediction

Red perilla is an important medicinal plant used in Kampo medicine. The development of elite varieties of this species is urgently required. Medicinal compounds are generally considered target traits in medicinal plant breeding; however, selection based on compound phenotypes (i.e., conventional selection) is expensive and time consuming. Here, we propose genomic selection (GS) and marker-assisted selection (MAS), which use marker information for selection, as suitable selection methods for medicinal plants, and we evaluate the effectiveness of these methods in perilla breeding. Three breeding populations generated from crosses between one red and three green perilla genotypes were used to elucidate the genetic mechanisms underlying the production of major medicinal compounds using quantitative trait locus analysis and evaluating the accuracy of genomic prediction (GP). We found that GP had a sufficiently high accuracy for all traits, confirming that GS is an effective method for perilla breeding. Moreover, the three populations showed varying degrees of segregation, suggesting that using these populations in breeding may simultaneously enhance multiple target traits. This study contributes to research on the genetic mechanisms of the major medicinal compounds of red perilla, as well as the breeding efficiency of this medicinal plant.

Multi-year field trials provide a massive repository of trait data on a highly diverse population of tomato and uncover novel determinants of tomato productivity

Tomato (Solanum lycopersicum) is a prominent fruit with rich genetic resources for crop improvement. By using a phenotype-guided screen of over 7900 tomato accessions from around the world, we identified new associations for complex traits such as fruit weight and total soluble solids (Brix). Here, we present the phenotypic data from several years of trials. To illustrate the power of this dataset we use two case studies. First, evaluation of color revealed allelic variation in phytoene synthase 1 that resulted in differently colored or even bicolored fruit. Secondly, in view of the negative relationship between fruit weight and Brix, we pre-selected a subset of the collection that includes high and low Brix values in each category of fruit size. Genome-wide association analysis allowed us to detect novel loci associated with total soluble solid content and fruit weight. In addition, we developed eight F2 biparental intraspecific populations. Furthermore, by taking a phenotype-guided approach we were able to isolate individuals with high Brix values that were not compromised in terms of yield. In addition, the demonstration of novel results despite the high number of previous genome-wide association studies of these traits in tomato suggests that adoption of a phenotype-guided pre-selection of germplasm may represent a useful strategy for finding target genes for breeding.

Genetic control of tomato fruit quality: from QTL mapping to Genome Wide Association studies and breeding

Consumers began to complain about the taste of tomato varieties in the late 1990's. Although tomato taste is influenced by environmental and post-harvest conditions, varieties show a large diversity for fruit quality traits. We herein review our past and present research work intended to improve tomato fruit quality. First, results from sensory analysis allowed identifying important traits for consumer preferences. Then, we dissected the genetic control of flavor related traits by mapping several QTL in the last 20 years, and identified the genes corresponding to a few major QTL. Since the availability of the tomato genome sequence, genome-wide association studies were performed on several panels of tomato accessions. We discovered a large number of associations for fruit composition and identified relevant allele combinations for breeding. We then performed a meta-analysis combining the results of several studies. We also checked the inheritance of quality traits at the hybrid level and assessed how genomic prediction could help selecting better tomato varieties.

Genetic architecture of fresh-market tomato yield

BACKGROUND

The fresh-market tomato (Solanum lycopersicum) is bred for direct consumption and is selected for a high yield of large fruits. To understand the genetic variations (distinct types of DNA sequence polymorphism) that influence the yield, we collected the phenotypic variations in the yields of total fruit, extra-large-sized fruit, small-sized fruit, or red-colored fruit from 68 core inbred contemporary U.S. fresh-market tomatoes for three consecutive years and the genomic information in 8,289,741 single nucleotide polymorphism (SNP) positions from the whole-genome resequencing of these tomatoes.

RESULTS

Genome-wide association (GWA) mapping using the SNP data with or without SNP filtering steps using the regularization methods, validated with quantitative trait loci (QTL) linkage mapping, identified 18 significant association signals for traits evaluated. Among them, 10 of which were not located within genomic regions previously identified as being associated with fruit size/shape. When mapping-driven association signals [558 SNPs associated with 28 yield (component) traits] were used to calculate genomic estimated breeding values (GEBVs) of evaluated traits, the prediction accuracies of the extra-large-sized fruit and small-sized fruit yields were higher than those of the total and red-colored fruit yields, as we tested the generated breeding values in inbred tomatoes and F2 populations. Improved accuracy in GEBV calculation of evaluated traits was achieved by using 364 SNPs identified using the regularization methods.

CONCLUSIONS

Together, these results provide an understanding of the genetic variations underlying the heritable phenotypic variability in yield in contemporary tomato breeding and the information necessary for improving such economically important and complex quantitative trait through breeding.

Germplasm Screening Using DNA Markers and Genome-Wide Association Study for the Identification of Powdery Mildew Resistance Loci in Tomato

Powdery mildew (PM), caused by Oidium spp. in tomato, is a global concern that leads to diminished yield. We aimed to evaluate previously reported DNA markers linked to powdery mildew resistance (PMR) and identify novel quantitative trait loci (QTLs) for PMR through a genome-wide association study in tomato. Sequencing analysis of the internal transcribed spacer (ITS) of a PM strain (PNU_PM) isolated from Miryang, Gyeongnam, led to its identification as Oidium neolycopersici. Thereafter, a PM bioassay was conducted for a total of 295 tomato accessions, among which 24 accessions (4 S. lycopersicum accessions and 20 accessions of seven wild species) showed high levels of resistance to PNU_PM. Subsequently, we genotyped 11 markers previously linked to PMR in 56 accessions. PMR-specific banding patterns were detected in 15/22 PMR accessions, while no such bands were observed in the powdery mildew-susceptible accessions. The genome-wide association study was performed using TASSEL and GAPIT, based on the phenotypic data of 290 accessions and 11,912 single nucleotide polymorphisms (SNPs) obtained from the Axiom® Tomato SNP Chip Array. Nine significant SNPs in chromosomes 1, 4, 6, 8, and 12, were selected and five novel QTL regions distinct from previously known PMR-QTL regions were identified. Of these QTL regions, three putative candidate genes for PMR were selected from chromosomes 4 and 8, including two nucleotide binding site-leucine rich repeat class genes and a receptor-like kinase gene, all of which have been identified previously as causative genes for PMR in several crop species. The SNPs discovered in these genes provide useful information for understanding the molecular basis of PMR and developing DNA markers for marker-assisted selection of PMR in tomato.

Genetic Behavior of Tomato (Solanum lycopersicum L.) Germplasm Governing Heavy Metal Tolerance and Yield Traits under Wastewater Irrigation

Wastewater irrigation is a substitute for surface water scarcity, but traces of heavy metals (HMs) result in deleterious implications for soil, crop productivity, and in humans. Crops presenting HMs tolerance in genetic behavior are important for producing tolerant genotypes cultivated under wastewater irrigation. In the first part of this experiment, the results obtained previously are re-assessed in a hydroponic system and similar patterns and concentrations of HMs are found in different tomato organs. Following this trial, the tomato’s (Solanum lycopersicum L.) genetic basis of traits conferring HMs tolerance and yield are assessed when irrigated with waste or canal water. The North Carolina Mating II analysis illustrate the amount of gene action, nature, and inheritance pattern. Genetic components depict the involvement of non-additive, additive, and maternal genetic effects in HMs tolerance inheritance and yield. A noticeable increase in cumulative additive variance for the number of flowers (11,907.2) and the number of fruits (10,557.9) is recorded for tomato plants irrigated with wastewater, illustrating additive gene action. However, female and male (MSf/MSm) square ratios also show an association with cytoplasmic inheritance. For HMs tolerance, both additive and dominant variances appeared to be significant; cumulative dominance variance (4.83, 16.1, 4.69, 76.95, and 249.37) is higher compared to additive variance (0.18, 2.36, 0.19, −0.27, and 14.14) for nickel (Ni), chromium (Cr), lead (Pb), manganese (Mn), and zinc (Zn), respectively, indicating dominance gene action. The genotype RIOGRANDI accumulated and translocated fewer HMs to the aerial part of the plant compared to CLN-2418A and PB-017906, thus presenting a tolerant tomato genotype according to the hydroponic experiment. This also exhibited a differential pattern of gene action for HMs tolerance, suggesting that genotypes possess significant differences for HMs tolerance.

Next generation sequencing technologies to explore the diversity of germplasm resources: achievements and trends in tomato

Tomato is one of the major vegetable crops grown worldwide and a model species for genetic and biological research. Progress in genomic technologies made possible the development of forefront methods for high-scale sequencing, providing comprehensive insight into the genetic architecture of germplasm resources. This review revisits next-generation sequencing strategies and applications to investigate the diversity of tomato, describing the common platforms used for SNP genotyping of large collections, de novo sequencing, and whole genome resequencing. Significant findings in evolutionary history are outlined, thus discussing how genomics has provided new hints about the processes behind domestication. Finally, achievement and perspectives on pan-genome construction and graphical pan-genome development toward precise mining of the natural variation to be exploited for breeding purposes are presented.

Genotyping-by-Sequencing Based Investigation of Population Structure and Genome Wide Association Studies for Seven Agronomically Important Traits in a Set of 346 Oryza rufipogon Accessions

Being one of the most important staple dietary constituents globally, genetic enhancement of cultivated rice for yield, agronomically important traits is of substantial importance. Even though the climatic factors and crop management practices impact complex traits like yield immensely, the contribution of variation by underlying genetic factors surpasses them all. Previous studies have highlighted the importance of utilizing exotic germplasm, landraces in enhancing the diversity of gene pool, leading to better selections and thus superior cultivars. Thus, to fully exploit the potential of progenitor of Asian cultivated rice for productivity related traits, genome wide association study (GWAS) for seven agronomically important traits was conducted on a panel of 346 O. rufipogon accessions using a set of 15,083 high-quality single nucleotide polymorphic markers. The phenotypic data analysis indicated large continuous variation for all the traits under study, with a significant negative correlation observed between grain parameters and agronomic parameters like plant height, culm thickness. The presence of 74.28% admixtures in the panel as revealed by investigating population structure indicated the panel to be very poorly genetically differentiated, with rapid LD decay. The genome-wide association analyses revealed a total of 47 strong MTAs with 19 SNPs located in/close to previously reported QTL/genic regions providing a positive analytic proof for our studies. The allelic differences of significant MTAs were found to be statistically significant at 34 genomic regions. A total of 51 O. rufipogon accessions harboured combination of superior alleles and thus serve as potential candidates for accelerating rice breeding programs. The present study identified 27 novel SNPs to be significantly associated with different traits. Allelic differences between cultivated and wild rice at significant MTAs determined superior alleles to be absent at 12 positions implying substantial scope of improvement by their targeted introgression into cultivars. Introgression of novel significant genomic regions into breeder's pool would broaden the genetic base of cultivated rice, thus making the crop more resilient.

Assessment of Greenhouse Tomato Anthesis Rate Through Metabolomics Using LASSO Regularized Linear Regression Model

While the high year-round production of tomatoes has been facilitated by solar greenhouse cultivation, these yields readily fluctuate in response to changing environmental conditions. Mathematic modeling has been applied to forecast phenotypes of tomatoes using environmental measurements (e.g., temperature) as indirect parameters. In this study, metabolome data, as direct parameters reflecting plant internal status, were used to construct a predictive model of the anthesis rate of greenhouse tomatoes. Metabolome data were obtained from tomato leaves and used as variables for linear regression with the least absolute shrinkage and selection operator (LASSO) for prediction. The constructed model accurately predicted the anthesis rate, with an R² value of 0.85. Twenty-nine of the 161 metabolites were selected as candidate markers. The selected metabolites were further validated for their association with anthesis rates using the different metabolome datasets. To assess the importance of the selected metabolites in cultivation, the relationships between the metabolites and cultivation conditions were analyzed via correspondence analysis. Trigonelline, whose content did not exhibit a diurnal rhythm, displayed major contributions to the cultivation, and is thus a potential metabolic marker for predicting the anthesis rate. This study demonstrates that machine learning can be applied to metabolome data to identify metabolites indicative of agricultural traits.

Multiple haplotype-based analyses provide genetic and evolutionary insights into tomato fruit weight and composition

Improving fruit quality traits such as metabolic composition remains a challenge for tomato breeders. To better understand the genetic architecture of these traits and decipher the demographic history of the loci controlling tomato quality traits, we applied an innovative approach using multiple haplotype-based analyses, aiming to test the potentials of haplotype based study in association and genomic prediction studies. We performed and compared haplotype vs SNP-based associations (hapQTL) with multi-locus mixed model (MLMM), focusing on tomato fruit weight and metabolite contents (i.e. sugars, organic acids and amino acids). Using a panel of 163 tomato accessions genotyped with 5995 SNPs, we detected a total of 784 haplotype blocks, with an average size of haplotype blocks ~58 kb. A total of 108 significant associations for 26 traits were detected thanks to Haplotype/SNP-based Bayes models. Haplotype-based Bayes model (97 associations) outperformed SNP-based Bayes model (50 associations) and MLMM (53 associations) in identifying marker-trait associations as well as in genomic prediction (especially for those traits with moderate to low heritability). To decipher the demographic history, we identified 24 positive selective sweeps using the integrated haplotype score (iHS). Most of the significant associations for tomato quality traits were located within selective sweeps (54.63% and 71.7% in hapQTL and MLMM models, respectively). Promising candidate genes were identified controlling tomato fruit weight and metabolite contents. We thus demonstrated the benefits of using haplotypes for evolutionary and genetic studies, providing novel insights into tomato quality improvement and breeding history.

Tomato genomic prediction for good performance under high-temperature and identification of loci involved in thermotolerance response

Many studies showed that few degrees above tomato optimum growth temperature threshold can lead to serious loss in production. Therefore, the development of innovative strategies to obtain tomato cultivars with improved yield under high temperature conditions is a main goal both for basic genetic studies and breeding activities. In this paper, a F4 segregating population was phenotypically evaluated for quantitative and qualitative traits under heat stress conditions. Moreover, a genotyping by sequencing (GBS) approach has been employed for building up genomic selection (GS) models both for yield and soluble solid content (SCC). Several parameters, including training population size, composition and marker quality were tested to predict genotype performance under heat stress conditions. A good prediction accuracy for the two analyzed traits (0.729 for yield production and 0.715 for SCC) was obtained. The predicted models improved the genetic gain of selection in the next breeding cycles, suggesting that GS approach is a promising strategy to accelerate breeding for heat tolerance in tomato. Finally, the annotation of SNPs located in gene body regions combined with QTL analysis allowed the identification of five candidates putatively involved in high temperatures response, and the building up of a GS model based on calibrated panel of SNP markers.

Genome-wide association study identifies QTL for eight fruit traits in cultivated tomato (Solanum lycopersicum L.)

Genome-wide association study (GWAS) is effective in identifying favorable alleles for traits of interest with high mapping resolution in crop species. In this study, we conducted GWAS to explore quantitative trait loci (QTL) for eight fruit traits using 162 tomato accessions with diverse genetic backgrounds. The eight traits included fruit weight, fruit width, fruit height, fruit shape index, pericarp thickness, locule number, fruit firmness, and brix. Phenotypic variations of these traits in the tomato collection were evaluated with three replicates in field trials over three years. We filtered 34,550 confident SNPs from the 51 K Axiom^® tomato array based on < 10% of missing data and > 5% of minor allele frequency for association analysis. The 162 tomato accessions were divided into seven clusters and their membership coefficients were used to account for population structure along with a kinship matrix. To identify marker-trait associations (MTAs), four phenotypic data sets representing each of three years and combined were independently analyzed in the multilocus mixed model (MLMM). A total of 30 significant MTAs was detected over data sets for eight fruit traits at P < 0.0005. The number of MTA per trait ranged from one (brix) to seven (fruit weight and fruit width). Two SNP markers on chromosomes 1 and 2 were significantly associated with multiple traits, suggesting pleiotropic effects of QTL. Furthermore, 16 of 30 MTAs suggest potential novel QTL for eight fruit traits. These results facilitate genetic dissection of tomato fruit traits and provide a useful resource to develop molecular tools for improving fruit traits via marker-assisted selection and genomic selection in tomato breeding programs.

Genomic prediction using a reference population of multiple pure breeds and admixed individuals

BACKGROUND

In dairy cattle populations in which crossbreeding has been used, animals show some level of diversity in their origins. In rotational crossbreeding, for instance, crossbred dams are mated with purebred sires from different pure breeds, and the genetic composition of crossbred animals is an admixture of the breeds included in the rotation. How to use the data of such individuals in genomic evaluations is still an open question. In this study, we aimed at providing methodologies for the use of data from crossbred individuals with an admixed genetic background together with data from multiple pure breeds, for the purpose of genomic evaluations for both purebred and crossbred animals. A three-breed rotational crossbreeding system was mimicked using simulations based on animals genotyped with the 50 K single nucleotide polymorphism (SNP) chip.

RESULTS

For purebred populations, within-breed genomic predictions generally led to higher accuracies than those from multi-breed predictions using combined data of pure breeds. Adding admixed population's (MIX) data to the combined pure breed data considering MIX as a different breed led to higher accuracies. When prediction models were able to account for breed origin of alleles, accuracies were generally higher than those from combining all available data, depending on the correlation of quantitative trait loci (QTL) effects between the breeds. Accuracies varied when using SNP effects from any of the pure breeds to predict the breeding values of MIX. Using those breed-specific SNP effects that were estimated separately in each pure breed, while accounting for breed origin of alleles for the selection candidates of MIX, generally improved the accuracies. Models that are able to accommodate MIX data with the breed origin of alleles approach generally led to higher accuracies than models without breed origin of alleles, depending on the correlation of QTL effects between the breeds.

CONCLUSIONS

Combining all available data, pure breeds' and admixed population's data, in a multi-breed reference population is beneficial for the estimation of breeding values for pure breeds with a small reference population. For MIX, such an approach can lead to higher accuracies than considering breed origin of alleles for the selection candidates, and using breed-specific SNP effects estimated separately in each pure breed. Including MIX data in the reference population of multiple breeds by considering the breed origin of alleles, accuracies can be further improved. Our findings are relevant for breeding programs in which crossbreeding is systematically applied, and also for populations that involve different subpopulations and between which exchange of genetic material is routine practice.

Harnessing Crop Wild Diversity for Climate Change Adaptation

Warming and drought are reducing global crop production with a potential to substantially worsen global malnutrition. As with the green revolution in the last century, plant genetics may offer concrete opportunities to increase yield and crop adaptability. However, the rate at which the threat is happening requires powering new strategies in order to meet the global food demand. In this review, we highlight major recent 'big data' developments from both empirical and theoretical genomics that may speed up the identification, conservation, and breeding of exotic and elite crop varieties with the potential to feed humans. We first emphasize the major bottlenecks to capture and utilize novel sources of variation in abiotic stress (i.e., heat and drought) tolerance. We argue that adaptation of crop wild relatives to dry environments could be informative on how plant phenotypes may react to a drier climate because natural selection has already tested more options than humans ever will. Because isolated pockets of cryptic diversity may still persist in remote semi-arid regions, we encourage new habitat-based population-guided collections for genebanks. We continue discussing how to systematically study abiotic stress tolerance in these crop collections of wild and landraces using geo-referencing and extensive environmental data. By uncovering the genes that underlie the tolerance adaptive trait, natural variation has the potential to be introgressed into elite cultivars. However, unlocking adaptive genetic variation hidden in related wild species and early landraces remains a major challenge for complex traits that, as abiotic stress tolerance, are polygenic (i.e., regulated by many low-effect genes). Therefore, we finish prospecting modern analytical approaches that will serve to overcome this issue. Concretely, genomic prediction, machine learning, and multi-trait gene editing, all offer innovative alternatives to speed up more accurate pre- and breeding efforts toward the increase in crop adaptability and yield, while matching future global food demands in the face of increased heat and drought. In order for these 'big data' approaches to succeed, we advocate for a trans-disciplinary approach with open-source data and long-term funding. The recent developments and perspectives discussed throughout this review ultimately aim to contribute to increased crop adaptability and yield in the face of heat waves and drought events.

Exploring Efficient Linear Mixed Models to Detect Quantitative Trait Locus-by-Environment Interactions

Genotype-by-environment (G × E) interactions are important for understanding genotype–phenotype relationships. To date, various statistical models have been proposed to account for G × E effects, especially in genomic selection (GS) studies. Generally, GS does not focus on the detection of each quantitative trait locus (QTL), while the genome-wide association study (GWAS) was designed for QTL detection. G × E modeling methods in GS can be included as covariates in GWAS using unified linear mixed models (LMMs). However, the efficacy of G × E modeling methods in GS studies has not been evaluated for GWAS. In this study, we performed a comprehensive comparison of LMMs that integrate the G × E modeling methods to detect both QTL and QTL-by-environment (Q × E) interaction effects. Model efficacy was evaluated using simulation experiments. For the fixed effect terms representing Q × E effects, simultaneous scoring of specific and nonspecific environmental effects was recommended because of the higher recall and improved genomic inflation factor value. For random effects, it was necessary to account for both G × E and genotype-by-trial (G × T) effects to control genomic inflation factor value. Thus, the recommended LMM includes fixed QTL effect terms that simultaneously score specific and nonspecific environmental effects and random effects accounting for both G × E and G × T. The LMM was applied to real tomato phenotype data obtained from two different cropping seasons. We detected not only QTLs with persistent effects across the cropping seasons but also QTLs with Q × E effects. The optimal LMM identified in this study successfully detected more QTLs with Q × E effects.

Genomic Selection for F1 Hybrid Breeding in Strawberry (Fragaria × ananassa)

Cultivated strawberry is the most widely consumed fruit crop in the world, and therefore, many breeding programs are underway to improve its agronomic traits such as fruit quality. Strawberry cultivars were vegetatively propagated through runners and carried a high risk of infection with viruses and insects. To solve this problem, the development of F₁ hybrid seeds has been proposed as an alternative breeding strategy in strawberry. In this study, we conducted a potential assessment of genomic selection (GS) in strawberry F₁ hybrid breeding. A total of 105 inbred lines were developed as candidate parents of strawberry F₁ hybrids. In addition, 275 parental combinations were randomly selected from the 105 inbred lines and crossed to develop test F₁ hybrids for GS model training. These populations were phenotyped for petiole length, leaf area, Brix, fruit hardness, and pericarp color. Whole-genome shotgun sequencing of the 105 inbred lines detected 20,811 single nucleotide polymorphism sites that were provided for subsequent GS analyses. In a GS model construction, inclusion of dominant effects showed a slight advantage in GS accuracy. In the across population prediction analysis, GS models using the inbred lines showed predictability for the test F₁ hybrids and vice versa, except for Brix. Finally, the GS models were used for phenotype prediction of 5,460 possible F₁ hybrids from 105 inbred lines to select F₁ hybrids with high fruit hardness or high pericarp color. These F₁ hybrids were developed and phenotyped to evaluate the efficacy of the GS. As expected, F₁ hybrids that were predicted to have high fruit hardness or high pericarp color expressed higher observed phenotypic values than the F₁ hybrids that were selected for other objectives. Through the analyses in this study, we demonstrated that GS can be applied for strawberry F₁ hybrid breeding.

The Genetic Basis of Tomato Aroma

Tomato (Solanum lycopersicum L.) aroma is determined by the interaction of volatile compounds (VOCs) released by the tomato fruits with receptors in the nose, leading to a sensorial impression, such as "sweet", "smoky", or "fruity" aroma. Of the more than 400 VOCs released by tomato fruits, 21 have been reported as main contributors to the perceived tomato aroma. These VOCs can be grouped in five clusters, according to their biosynthetic origins. In the last decades, a vast array of scientific studies has investigated the genetic component of tomato aroma in modern tomato cultivars and their relatives. In this paper we aim to collect, compare, integrate and summarize the available literature on flavour-related QTLs in tomato. Three hundred and 5ifty nine (359) QTLs associated with tomato fruit VOCs were physically mapped on the genome and investigated for the presence of potential candidate genes. This review makes it possible to (i) pinpoint potential donors described in literature for specific traits, (ii) highlight important QTL regions by combining information from different populations, and (iii) pinpoint potential candidate genes. This overview aims to be a valuable resource for researchers aiming to elucidate the genetics underlying tomato flavour and for breeders who aim to improve tomato aroma.

Genomic Prediction and Selection for Fruit Traits in Winter Squash

Improving fruit quality is an important but challenging breeding goal in winter squash. Squash breeding in general is resource-intensive, especially in terms of space, and the biology of squash makes it difficult to practice selection on both parents. These restrictions translate to smaller breeding populations and limited use of greenhouse generations, which in turn, limit genetic gain per breeding cycle and increases cycle length. Genomic selection is a promising technology for improving breeding efficiency; yet, few studies have explored its use in horticultural crops. We present results demonstrating the predictive ability of whole-genome models for fruit quality traits. Predictive abilities for quality traits were low to moderate, but sufficient for implementation. To test the use of genomic selection for improving fruit quality, we conducted three rounds of genomic recurrent selection in a butternut squash (Cucurbita moschata) population. Selections were based on a fruit quality index derived from a multi-trait genomic selection model. Remnant seed from selected populations was used to assess realized gain from selection. Analysis revealed significant improvement in fruit quality index value and changes in correlated traits. This study is one of the first empirical studies to evaluate gain from a multi-trait genomic selection model in a resource-limited horticultural crop.

Accelerating Tomato Breeding by Exploiting Genomic Selection Approaches

Genomic selection (GS) is a predictive approach that was built up to increase the rate of genetic gain per unit of time and reduce the generation interval by utilizing genome-wide markers in breeding programs. It has emerged as a valuable method for improving complex traits that are controlled by many genes with small effects. GS enables the prediction of the breeding value of candidate genotypes for selection. In this work, we address important issues related to GS and its implementation in the plant context with special emphasis on tomato breeding. Genomic constraints and critical parameters affecting the accuracy of prediction such as the number of markers, statistical model, phenotyping and complexity of trait, training population size and composition should be carefully evaluated. The comparison of GS approaches for facilitating the selection of tomato superior genotypes during breeding programs is also discussed. GS applied to tomato breeding has already been shown to be feasible. We illustrated how GS can improve the rate of gain in elite line selection, and descendent and backcross schemes. The GS schemes have begun to be delineated and computer science can provide support for future selection strategies. A new promising breeding framework is beginning to emerge for optimizing tomato improvement procedures.

Advances in Omics Approaches for Abiotic Stress Tolerance in Tomato

Tomato, one of the most important crops worldwide, has a high demand in the fresh fruit market and processed food industries. Despite having considerably high productivity, continuous supply as per the market demand is hard to achieve, mostly because of periodic losses occurring due to biotic as well as abiotic stresses. Although tomato is a temperate crop, it is grown in almost all the climatic zones because of widespread demand, which makes it challenge to adapt in diverse conditions. Development of tomato cultivars with enhanced abiotic stress tolerance is one of the most sustainable approaches for its successful production. In this regard, efforts are being made to understand the stress tolerance mechanism, gene discovery, and interaction of genetic and environmental factors. Several omics approaches, tools, and resources have already been developed for tomato growing. Modern sequencing technologies have greatly accelerated genomics and transcriptomics studies in tomato. These advancements facilitate Quantitative trait loci (QTL) mapping, genome-wide association studies (GWAS), and genomic selection (GS). However, limited efforts have been made in other omics branches like proteomics, metabolomics, and ionomics. Extensive cataloging of omics resources made here has highlighted the need for integration of omics approaches for efficient utilization of resources and a better understanding of the molecular mechanism. The information provided here will be helpful to understand the plant responses and the genetic regulatory networks involved in abiotic stress tolerance and efficient utilization of omics resources for tomato crop improvement.

An R Package for Bayesian Analysis of Multi-environment and Multi-trait Multi-environment Data for Genome-Based Prediction

Evidence that genomic selection (GS) is a technology that is revolutionizing plant breeding continues to grow. However, it is very well documented that its success strongly depends on statistical models, which are used by GS to perform predictions of candidate genotypes that were not phenotyped. Because there is no universally better model for prediction and models for each type of response variable are needed (continuous, binary, ordinal, count, etc.), an active area of research aims to develop statistical models for the prediction of univariate and multivariate traits in GS. However, most of the models developed so far are for univariate and continuous (Gaussian) traits. Therefore, to overcome the lack of multivariate statistical models for genome-based prediction by improving the original version of the BMTME, we propose an improved Bayesian multi-trait and multi-environment (BMTME) R package for analyzing breeding data with multiple traits and multiple environments. We also introduce Bayesian multi-output regressor stacking (BMORS) functions that are considerably efficient in terms of computational resources. The package allows parameter estimation and evaluates the prediction performance of multi-trait and multi-environment data in a reliable, efficient and user-friendly way. We illustrate the use of the BMTME with real toy datasets to show all the facilities that the software offers the user. However, for large datasets, the BME() and BMTME() functions of the BMTME R package are very intense in terms of computing time; on the other hand, less intensive computing is required with BMORS functions BMORS() and BMORS_Env() that are also included in the BMTME package.

Genomic Prediction Using Multi-trait Weighted GBLUP Accounting for Heterogeneous Variances and Covariances Across the Genome

Implicit assumption of common (co)variance for all loci in multi-trait Genomic Best Linear Unbiased Prediction (GBLUP) results in a genomic relationship matrix (G) that is common to all traits. When this assumption is violated, Bayesian whole genome regression methods may be superior to GBLUP by accounting for unequal (co)variance for all loci or genome regions. This study aimed to develop a strategy to improve the accuracy of GBLUP for multi-trait genomic prediction, using (co)variance estimates of SNP effects from Bayesian whole genome regression methods. Five generations (G1-G5, test populations) of genotype data were available by simulations based on data of 2,200 Danish Holstein cows (G0, reference population). Two correlated traits with heritabilities of 0.1 or 0.4, and a genetic correlation of 0.45 were generated. First, SNP effects and breeding values were estimated using BayesAS method, assuming (co)variance was the same for SNPs within a genome region, and different between regions. Region size was set as one SNP, 100 SNPs, a whole chromosome or whole genome. Second, posterior (co)variances of SNP effects were used to weight SNPs in construction of G matrices. In general, region size of 100 SNPs led to highest prediction accuracies using BayesAS, and wGBLUP outperformed GBLUP at this region size. Our results suggest that when genetic architectures of traits favor Bayesian methods, the accuracy of multi-trait GBLUP can be as high as the Bayesian method if SNPs are weighted by the Bayesian posterior (co)variances.

Identification of Nutritional Components in Black Sesame Determined by Widely Targeted Metabolomics and Traditional Chinese Medicines

Chemical composition of secondary metabolites is of great importance for quality control of agricultural products. Black sesame seeds are significantly more expensive than white sesame seeds, because it is thought that black sesame seeds are more beneficial to human health than white sesame seeds. However, the differences in nutrient composition between black sesame seeds and white sesame seeds are still unknown. The current study examined the levels of different metabolites in black and white sesame seeds via the use of a novel metabolomics strategy. Using widely targeted metabolomics data, we obtained the structure and content of 557 metabolites, out of which 217 metabolites were identified, and discovered 30 metabolic pathways activated by the secondary metabolites in both black and white sesame seeds. Our results demonstrated that the main pathways that were differentially activated included: phenylpropanoid biosynthesis, tyrosine metabolism, and riboflavin metabolism. More importantly, the biomarkers that were significantly different between black seeds and white sesame seeds are highly related to the functions recorded in traditional Chinese medicine. The results of this study may serve as a new theoretical reference for breeding experts to promote the genetic improvement of sesame seeds, and therefore the cultivation of higher quality sesame varieties.

The parthenocarpic gene Pat-k is generated by a natural mutation of SlAGL6 affecting fruit development in tomato (Solanum lycopersicum L.)

BACKGROUND

Parthenocarpy is a desired trait in tomato because it can overcome problems with fruit setting under unfavorable environmental conditions. A parthenocarpic tomato cultivar, 'MPK-1', with a parthenocarpic gene, Pat-k, exhibits stable parthenocarpy that produces few seeds. Because 'MPK-1' produces few seeds, seedlings are propagated inefficiently via cuttings. It was reported that Pat-k is located on chromosome 1. However, the gene had not been isolated and the relationship between the parthenocarpy and low seed set in 'MPK-1' remained unclear. In this study, we isolated Pat-k to clarify the relationship between parthenocarpy and low seed set in 'MPK-1'.

RESULTS

Using quantitative trait locus (QTL) analysis for parthenocarpy and seed production, we detected a major QTL for each trait on nearly the same region of the Pat-k locus on chromosome 1. To isolate Pat-k, we performed fine mapping using an F₄ population following the cross between a non-parthenocarpic cultivar, 'Micro-Tom' and 'MPK-1'. The results showed that Pat-k was located in the 529 kb interval between two markers, where 60 genes exist. By using data from a whole genome re-sequencing and genome sequence analysis of 'MPK-1', we could identify that the SlAGAMOUS-LIKE 6 (SlAGL6) gene of 'MPK-1' was mutated by a retrotransposon insertion. The transcript level of SlAGL6 was significantly lower in ovaries of 'MPK-1' than a non-parthenocarpic cultivar. From these results, we could conclude that Pat-k is SlAGL6, and its down-regulation in 'MPK-1' causes parthenocarpy and low seed set. In addition, we observed abnormal micropyles only in plants homozygous for the 'MPK-1' allele at the Pat-k/SlAGL6 locus. This result suggests that Pat-k/SlAGL6 is also related to ovule formation and that the low seed set in 'MPK-1' is likely caused by abnormal ovule formation through down-regulation of Pat-k/SlAGL6.

CONCLUSIONS

Pat-k is identical to SlAGL6, and its down-regulation causes parthenocarpy and low seed set in 'MPK-1'. Moreover, down-regulation of Pat-k/SlAGL6 could cause abnormal ovule formation, leading to a reduction in the number of seeds.

Rapid identification of candidate genes for resistance to tomato late blight disease using next-generation sequencing technologies

Tomato late blight caused by Phytophthora infestans (Mont.) de Bary, also known as the Irish famine pathogen, is one of the most destructive plant diseases. Wild relatives of tomato possess useful resistance genes against this disease, and could therefore be used in breeding to improve cultivated varieties. In the genome of a wild relative of tomato, Solanum habrochaites accession LA1777, we identified a new quantitative trait locus for resistance against blight caused by an aggressive Egyptian isolate of P. infestans. Using double-digest restriction site-associated DNA sequencing (ddRAD-Seq) technology, we determined 6,514 genome-wide SNP genotypes of an F2 population derived from an interspecific cross. Subsequent association analysis of genotypes and phenotypes of the mapping population revealed that a 6.8 Mb genome region on chromosome 6 was a candidate locus for disease resistance. Whole-genome resequencing analysis revealed that 298 genes in this region potentially had functional differences between the parental lines. Among of them, two genes with missense mutations, Solyc06g071810.1 and Solyc06g083640.3, were considered to be potential candidates for disease resistance. SNP and SSR markers linking to this region can be used in marker-assisted selection in future breeding programs for late blight disease, including introgression of new genetic loci from wild species. In addition, the approach developed in this study provides a model for identification of other genes for attractive agronomical traits.

Development and characterization of a strawberry MAGIC population derived from crosses with six strawberry cultivars

A strawberry Multi-parent Advanced Generation Intercrosses (MAGIC) population, derived from crosses using six strawberry cultivars was successfully developed. The population was composed of 338 individuals; genome conformation was evaluated by expressed sequence tag-derived simple short repeat (EST-SSR) markers. Cluster analysis and principal component analysis (PCA) based on EST-SSR marker polymorphisms revealed that the MAGIC population was a mosaic of the six founder cultivars and covered the genomic regions of the six founders evenly. Fruit quality related traits, including days to flowering (DTF), fruit weight (FW), fruit firmness (FF), fruit color (FC), soluble solid content (SC), and titratable acidity (TA), of the MAGIC population were evaluated over two years. All traits showed normal transgressive segregation beyond the founder cultivars and most traits, except for DTF, distributed normally. FC exhibited the highest correlation coefficient overall and was distributed normally regardless of differences in DTF, FW, FF, SC, and TA. These facts were supported by PCA using fruit quality related values as explanatory variables, suggesting that major genetic factors, which are not influenced by fluctuations in other fruit traits, could control the distribution of FC. This MAGIC population is a promising resource for genome-wide association studies and genomic selection for efficient strawberry breeding.

Bayesian QTL mapping using genome-wide SSR markers and segregating population derived from a cross of two commercial F1 hybrids of tomato

Using newly developed euchromatin-derived genomic SSR markers and a flexible Bayesian mapping method, 13 significant agricultural QTLs were identified in a segregating population derived from a four-way cross of tomato. So far, many QTL mapping studies in tomato have been performed for progeny obtained from crosses between two genetically distant parents, e.g., domesticated tomatoes and wild relatives. However, QTL information of quantitative traits related to yield (e.g., flower or fruit number, and total or average weight of fruits) in such intercross populations would be of limited use for breeding commercial tomato cultivars because individuals in the populations have specific genetic backgrounds underlying extremely different phenotypes between the parents such as large fruit in domesticated tomatoes and small fruit in wild relatives, which may not be reflective of the genetic variation in tomato breeding populations. In this study, we constructed F₂ population derived from a cross between two commercial F₁ cultivars in tomato to extract QTL information practical for tomato breeding. This cross corresponded to a four-way cross, because the four parental lines of the two F₁ cultivars were considered to be the founders. We developed 2510 new expressed sequence tag (EST)-based (euchromatin-derived) genomic SSR markers and selected 262 markers from these new SSR markers and publicly available SSR markers to construct a linkage map. QTL analysis for ten agricultural traits of tomato was performed based on the phenotypes and marker genotypes of F₂ plants using a flexible Bayesian method. As results, 13 QTL regions were detected for six traits by the Bayesian method developed in this study.

Mitigation of inbreeding while preserving genetic gain in genomic breeding programs for outbred plants

Heuristic genomic inbreeding controls reduce inbreeding in genomic breeding schemes without reducing genetic gain. Genomic selection is increasingly being implemented in plant breeding programs to accelerate genetic gain of economically important traits. However, it may cause significant loss of genetic diversity when compared with traditional schemes using phenotypic selection. We propose heuristic strategies to control the rate of inbreeding in outbred plants, which can be categorised into three types: controls during mate allocation, during selection, and simultaneous selection and mate allocation. The proposed mate allocation measure GminF allocates two or more parents for mating in mating groups that minimise coancestry using a genomic relationship matrix. Two types of relationship-adjusted genomic breeding values for parent selection candidates ([Formula: see text]) and potential offspring ([Formula: see text]) are devised to control inbreeding during selection and even enabling simultaneous selection and mate allocation. These strategies were tested in a case study using a simulated perennial ryegrass breeding scheme. As compared to the genomic selection scheme without controls, all proposed strategies could significantly decrease inbreeding while achieving comparable genetic gain. In particular, the scenario using [Formula: see text] in simultaneous selection and mate allocation reduced inbreeding to one-third of the original genomic selection scheme. The proposed strategies are readily applicable in any outbred plant breeding program.

Efficiency of genomic selection for breeding population design and phenotype prediction in tomato

Genomic selection (GS), which uses estimated genetic potential based on genome-wide genotype data for a breeding selection, is now widely accepted as an efficient method to improve genetically complex traits. We assessed the potential of GS for increasing soluble solids content and total fruit weight of tomato. A collection of big-fruited F1 varieties was used to construct the GS models, and the progeny from crosses was used to validate the models. The present study includes two experiments: a prediction of a parental combination that generates superior progeny and the prediction of progeny phenotypes. The GS models successfully predicted a better parent even if the phenotypic value did not vary substantially between candidates. The GS models also predicted phenotypes of progeny, although their efficiency varied depending on the parental cross combinations and the selected traits. Although further analyses are required to apply GS in an actual breeding situation, our results indicated that GS is a promising strategy for future tomato breeding design.

Genetic Nature of Elemental Contents in Wheat Grains and Its Genomic Prediction: Toward the Effective Use of Wheat Landraces from Afghanistan

Profiling elemental contents in wheat grains and clarifying the underlying genetic systems are important for the breeding of biofortified crops. Our objective was to evaluate the genetic potential of 269 Afghan wheat landraces for increasing elemental contents in wheat cultivars. The contents of three major (Mg, K, and P) and three minor (Mn, Fe, and Zn) elements in wheat grains were measured by energy dispersive X-ray fluorescence spectrometry. Large variations in elemental contents were observed among landraces. Marker-based heritability estimates were low to moderate, suggesting that the elemental contents are complex quantitative traits. Genetic correlations between two locations (Japan and Afghanistan) and among the six elements were estimated using a multi-response Bayesian linear mixed model. Low-to-moderate genetic correlations were observed among major elements and among minor elements respectively, but not between major and minor elements. A single-response genome-wide association study detected only one significant marker, which was associated with Zn, suggesting it will be difficult to increase the elemental contents of wheat by conventional marker-assisted selection. Genomic predictions for major elemental contents were moderately or highly accurate, whereas those for minor elements were mostly low or moderate. Our results indicate genomic selection may be useful for the genetic improvement of elemental contents in wheat.