In vivo vascularization of MSC-loaded porous hydroxyapatite constructs coated with VEGF-functionalized collagen/heparin multilayers

Effectiveness of Bilayer Scaffold Containing Chitosan/Gelatin/Diclofenac and Bovine Hydroxyapatite on Cartilage/Subchondral Regeneration in Rabbit Joint Defect Models

Subchondral defects are often caused by trauma involving cartilage damage, leading to subsequent damage to the underlying bone, specifically the subchondral region. Bilayer scaffolds made from biomaterials, such as bovine hydroxyapatite, possess biocompatible and biodegradable properties that mimic the natural environmental conditions of target tissues so that they can support the formation of new tissues. On the other side, diclofenac as an anti-inflammatory drug potentiates to inhibit the inflammatory excess regarding the damage. This study aims to study the effectiveness of diclofenac scaffold to rabbit joint defect model. The scaffold was implanted in the rabbit femoral trochlear bone hole, which had a diameter of 5 mm and a depth of 4 mm. After 28 days of intervention, the animals were examined using macroscopic evaluation, hematoxylin-eosin (HE) staining, and immunohistochemistry (IHC) for type I collagen and type II collagen. Subsequently, the cartilage was evaluated using the International Cartilage Repair Society (ICRS) scoring system. The macroscopic ICRS scores were significantly higher (p < 0.05) in the bilayer scaffold implantation group compared to the monolayer scaffold and control groups. Histological ICRS scores were also significantly higher (p < 0.05) in the bilayer scaffold group compared to the control group. Type II collagen expression was higher (p < 0.05) in the bilayer scaffold group compared to the monolayer scaffold and control groups, although type I collagen expression was lower in comparison. In conclusion, this research suggests that the diclofenac-loaded bilayer scaffold effectively enhances cartilage and subchondral bone regeneration.

Porous Semiconducting Polymer Nanoparticles as Intracellular Biophotonic Mediators to Modulate the Reactive Oxygen Species Balance

The integration of nanotechnology with photoredox medicine has led to the emergence of biocompatible semiconducting polymer nanoparticles (SPNs) for the optical modulation of intracellular reactive oxygen species (ROS). However, the need for efficient photoactive materials capable of finely controlling the intracellular redox status with high spatial resolution at a nontoxic light density is still largely unmet. Herein, highly photoelectrochemically efficient photoactive polymer beads are developed. The photoactive material/electrolyte interfacial area is maximized by designing porous semiconducting polymer nanoparticles (PSPNs). PSPNs are synthesized by selective hydrolysis of the polyester segments of nanoparticles made of poly(3-hexylthiophene)-graft-poly(lactic acid) (P3HT-g-PLA). The photocurrent of PSPNs is 4.5-fold higher than that of nonporous P3HT-g-PLA-SPNs, and PSPNs efficiently reduce oxygen in an aqueous environment. PSPNs are internalized within endothelial cells and optically trigger ROS generation with a >1.3-fold concentration increase with regard to nonporous P3HT-SPNs, at a light density as low as a few milliwatts per square centimeter, fully compatible with in vivo, chronic applications.

Creation of Porous, Perfusable Microtubular Networks for Improved Cell Viability in Volumetric Hydrogels

The creation of large, volumetric tissue-engineered constructs has long been hindered due to the lack of effective vascularization strategies. Recently, 3D printing has emerged as a viable approach to creating vascular structures; however, its application is limited. Here, we present a simple and controllable technique to produce porous, free-standing, perfusable tubular networks from sacrificial templates of polyelectrolyte complex and coatings of salt-containing citrate-based elastomer poly(1,8-octanediol-co-citrate) (POC). As demonstrated, fully perfusable and interconnected POC tubular networks with channel diameters ranging from 100 to 400 μm were created. Incorporating NaCl particulates into the POC coating enabled the formation of micropores (∼19 μm in diameter) in the tubular wall upon particulate leaching to increase the cross-wall fluid transport. Casting and cross-linking gelatin methacrylate (GelMA) suspended with human osteoblasts over the free-standing porous POC tubular networks led to the fabrication of 3D cell-encapsulated constructs. Compared to the constructs without POC tubular networks, those with either solid or porous wall tubular networks exhibited a significant increase in cell viability and proliferation along with healthy cell morphology, particularly those with porous networks. Taken together, the sacrificial template-assisted approach is effective to fabricate tubular networks with controllable channel diameter and patency, which can be easily incorporated into cell-encapsulated hydrogels or used as tissue-engineering scaffolds to improve cell viability.

Heparinized Acellular Hydrogels for Magnetically Induced Wound Healing Applications

The control of angiogenesis has the potential to be used for regulation of several pathological and physiological processes, which can be instrumental on the development of anticancer and wound healing therapeutical approaches. In this study, mesenchymal stem/stromal cells (MSCs) were seeded on magnetic-responsive gelatin, with or without heparin functionalization, and exposed to a static 0.08 T magnetic field (MF), for controlling their anti-inflammatory and angiogenic activity, with the aim of accelerating tissue healing. For the first time, it was examined how the amount of heparin and magnetic nanoparticles (MNPs) distributed on gelatin scaffolds affected the mechanical properties of the hydrogels and the morphology, proliferation, and secretome profiling of MSCs. The findings demonstrated that the addition of MNPs and heparin affects the hydrogel swelling capacity and renders distinct MSC proliferation rates. Additionally, MF acts as a topographical cue to guide MSCs alignment and increases the level of expression of specific genes and proteins that promote angiogenesis. The results also suggested that the presence of higher amounts of heparin (10 μg/cm3) interferes with the secretion and limits the capacity of angiogenic factors to diffuse through the hydrogel and into the culture medium. Ultimately, this study shows that acellular heparinized hydrogels efficiently retain the angiogenic growth factors released by magnetically stimulated MSCs thus rendering superior wound contraction (55.8% ± 0.4%) and cell migration rate (49.4% ± 0.4%), in comparison to nonheparinized hydrogels (35.2% ± 0.7% and 37.8% ± 0.7%, respectively). Therefore, these heparinized magnetic hydrogels can be used to facilitate angiogenesis in various forms of tissue damage including bone defects, skin wounds, and cardiovascular diseases, leading to enhanced tissue regeneration.

The Use of Functional Biomaterials in Aesthetic and Functional Restoration in Orbital Surgery

The integration of functional biomaterials in oculoplastic and orbital surgery is a pivotal area where material science and clinical practice converge. This review, encompassing primary research from 2015 to 2023, delves into the use of biomaterials in two key areas: the reconstruction of orbital floor fractures and the development of implants and prostheses for anophthalmic sockets post-eye removal. The discussion begins with an analysis of orbital floor injuries, including their pathophysiology and treatment modalities. It is noted that titanium mesh remains the gold standard for orbital floor repair due to its effectiveness. The review then examines the array of materials used for orbital implants and prostheses, highlighting the dependence on surgeon preference and experience, as there are currently no definitive guidelines. While recent innovations in biomaterials show promise, the review underscores the need for more clinical data before these new materials can be widely adopted in clinical settings. The review advocates for an interdisciplinary approach in orbital surgery, emphasizing patient-centered care and the potential of biomaterials to significantly enhance patient outcomes.

Biomedical applications of engineered heparin-based materials

Heparin is a negatively charged polysaccharide with various chain lengths and a hydrophilic backbone. Due to its fascinating chemical and physical properties, nontoxicity, biocompatibility, and biodegradability, heparin has been extensively used in different fields of medicine, such as cardiovascular and hematology. This review highlights recent and future advancements in designing materials based on heparin for various biomedical applications. The physicochemical and mechanical properties, biocompatibility, toxicity, and biodegradability of heparin are discussed. In addition, the applications of heparin-based materials in various biomedical fields, such as drug/gene delivery, tissue engineering, cancer therapy, and biosensors, are reviewed. Finally, challenges, opportunities, and future perspectives in preparing heparin-based materials are summarized.

Induction of scaffold angiogenesis by recipient vasculature precision micropuncture

The success of engineered tissues continues to be limited by time to vascularization and perfusion. Here, we studied the effects of precision injury to a recipient macrovasculature in promoting neovessel formation in an adjacently placed scaffold. Segmental 60 μm diameter micropunctures (MP) were created in the recipient rat femoral artery and vein followed by coverage with a simple collagen scaffold. Scaffolds were harvested at 24, 48, 72, and 96 h post-implantation for detailed analysis. Those placed on top of an MP segment showed an earlier and more robust cellular infiltration, including both endothelial cells (CD31) and macrophages (F4/80), compared to internal non-micropunctured control limbs (p < 0.05). At the 96-hour timepoint, MP scaffolds demonstrated an increase in physiologic perfusion (p < 0.003) and a 2.5-fold increase in capillary network formation (p < 0.001). These were attributed to an overall upsurge in small vessel quantity. Furthermore, MP positioned scaffolds demonstrated significant increases in many modulators of angiogenesis, including VEGFR2 and Tie-2 despite a decrease in HIF-1α at all timepoints. This study highlights a novel microsurgical approach that can be used to rapidly vascularize or inosculate contiguously placed scaffolds and grafts. Thereby, offering an easily translatable route towards the creation of thicker and more clinically relevant engineered tissues.

Osteoblast cell viability over ultra-long tricalcium phosphate nanocrystal-based methacrylate chitosan composite for bone regeneration

Bio-ceramic morphology plays a crucial role in bone repair and regeneration. It is extensively utilized in bone scaffold synthesis due to its better biological system activity and biocompatibility. Here, the ultra-long tricalcium phosphate (UTCP) was synthesized with the assistance of the ultrasonication method. The UTCP is modified as a scaffold by the reinforcement of methacrylate chitosan (MAC) polymer. The functionality of UTCP, UTCP combined MAC, methotrexate (MTX) loaded composites was characterized through FTIR (Fourier transform infrared spectroscopy). The crystalline natures are investigated by the XRD (X-ray diffraction), and results shows the ultra-long tricalcium phosphate crystalline phase is not altered after the reinforcement of MAC polymer and loading of MTX drugs. The morphological analyses were observed through electron microscopic analysis, and rod, polymer-coated rod structures were observed. The UTCP/MAC composite mechanical stress was increased from 1813 Pa of UTCP to 4272 Pa. The MTX loading and release was achieved 79.0 % within 3 h and 76.15 % at 20 h respectively. The UTCP/MAC and UTCP/MAC/MTX's viability investigated osteoblast like the cells (MG-63), and the MTX loaded UTCP/MAC composite exhibits good viability behaviors up to 96.0 % in 14 days. The results confirm the higher compatibility of the composite and profitable cell growth. It may be suitable for bone implantation preparation and it helps in faster regeneration of bone tissue after the in-vivo and clinical evaluation.

Mesenchymal Stem/Progenitor Cells: The Prospect of Human Clinical Translation

Mesenchymal stem/progenitor cells (MSCs) are key players in regenerative medicine, relying principally on their differentiation/regeneration potential, immunomodulatory properties, paracrine effects, and potent homing ability with minimal if any ethical concerns. Even though multiple preclinical and clinical studies have demonstrated remarkable properties for MSCs, the clinical applicability of MSC-based therapies is still questionable. Several challenges exist that critically hinder a successful clinical translation of MSC-based therapies, including but not limited to heterogeneity of their populations, variability in their quality and quantity, donor-related factors, discrepancies in protocols for isolation, in vitro expansion and premodification, and variability in methods of cell delivery, dosing, and cell homing. Alterations of MSC viability, proliferation, properties, and/or function are also affected by various drugs and chemicals. Moreover, significant safety concerns exist due to possible teratogenic/neoplastic potential and transmission of infectious diseases. Through the current review, we aim to highlight the major challenges facing MSCs' human clinical translation and shed light on the undergoing strategies to overcome them.

Vascularization Strategies in the Prevention of Nonunion Formation

Delayed healing and nonunion formation are major challenges in orthopedic surgery, which require the development of novel treatment strategies. Vascularization is considered one of the major prerequisites for successful bone healing, providing an adequate nutrient supply and allowing the infiltration of progenitor cells to the fracture site. Hence, during the last decade, a considerable number of studies have focused on the evaluation of vascularization strategies to prevent or to treat nonunion formation. These involve (1) biophysical applications, (2) systemic pharmacological interventions, and (3) tissue engineering, including sophisticated scaffold materials, local growth factor delivery systems, cell-based techniques, and surgical vascularization approaches. Accumulating evidence indicates that in nonunions, these strategies are indeed capable of improving the process of bone healing. The major challenge for the future will now be the translation of these strategies into clinical practice to make them accessible for the majority of patients. If this succeeds, these vascularization strategies may markedly reduce the incidence of nonunion formation. Impact statement Delayed healing and nonunion formation are a major clinical problem in orthopedic surgery. This review provides an overview of vascularization strategies for the prevention and treatment of nonunions. The successful translation of these strategies in clinical practice is of major importance to achieve adequate bone healing.

Role of biomechanics in vascularization of tissue-engineered bones

Biomaterial based reconstruction is still the most commonly employed method of small bone defect reconstruction. Bone tissue-engineered techniques are improving, and adjuncts such as vascularization technologies allow re-evaluation of traditional reconstructive methods for healingofcritical-sized bone defect. Slow infiltration rate of vasculogenesis after cell-seeded scaffold implantation limits the use of clinically relevant large-sized scaffolds. Hence, in vitro vascularization within the tissue-engineered bone before implantation is required to overcome the serious challenge of low cell survival rate after implantation which affects bone tissue regeneration and osseointegration. Mechanobiological interactions between cells and microvascular mechanics regulate biological processes regarding cell behavior. In addition, load-bearing scaffolds demand mechanical stability properties after vascularization to have adequate strength while implanted. With the advent of bioreactors, vascularization has been greatly improved by biomechanical regulation of stem cell differentiation through fluid-induced shear stress and synergizing osteogenic and angiogenic differentiation in multispecies coculture cells. The benefits of vascularization are clear: avoidance of mass transfer limitation and oxygen deprivation, a significant decrease in cell necrosis, and consequently bone development, regeneration and remodeling. Here, we discuss specific techniques to avoid pitfalls and optimize vascularization results of tissue-engineered bone. Cell source, scaffold modifications and bioreactor design, and technique specifics all play a critical role in this new, and rapidly growing method for bone defect reconstruction. Given the crucial importance of long-term survival of vascular network in physiological function of 3D engineered-bone constructs, greater knowledge of vascularization approaches may lead to the development of new strategies towards stabilization of formed vascular structure.

Sulfated chitosan coated polylactide membrane enhanced osteogenic and vascularization differentiation in MC3T3-E1s and HUVECs co-cultures system

This study aimed to compare the effects of the two type chitosan derivatives, sulfated chitosan (SCS) and phosphorylated chitosan (PCS), coated on poly(d,l-lactide) (PDLLA) membrane via polydopamine, respectively, on vascularization and osteogenesis in vitro. Mouse preosteoblast cells (MC3T3-E1s) and human umbilical vein endothelial cells (HUVECs) were used as co-cultures system. The effects of two type membranes on calcium deposition, alkaline phosphatase (ALP) activity, vascularization related factors nitric oxide (NO) and angiogenic growth factor vascular endothelial growth factor (VEGF) were assessed. The changes of osteogenic and angiogenic related gene, and protein expression were evaluated too. In fact, SCS modified PDLLA membrane had the highest related gene and protein expression than other PDLLA membranes. Our results demonstrated that the SCS maybe a promising matrix for bone regeneration by co-cultures of ECs and OCs than PCS.

Why Should Growth Hormone (GH) Be Considered a Promising Therapeutic Agent for Arteriogenesis? Insights from the GHAS Trial

Despite the important role that the growth hormone (GH)/IGF-I axis plays in vascular homeostasis, these kind of growth factors barely appear in articles addressing the neovascularization process. Currently, the vascular endothelium is considered as an authentic gland of internal secretion due to the wide variety of released factors and functions with local effects, including the paracrine/autocrine production of GH or IGF-I, for which the endothelium has specific receptors. In this comprehensive review, the evidence involving these proangiogenic hormones in arteriogenesis dealing with the arterial occlusion and making of them a potential therapy is described. All the elements that trigger the local and systemic production of GH/IGF-I, as well as their possible roles both in physiological and pathological conditions are analyzed. All of the evidence is combined with important data from the GHAS trial, in which GH or a placebo were administrated to patients suffering from critical limb ischemia with no option for revascularization. We postulate that GH, alone or in combination, should be considered as a promising therapeutic agent for helping in the approach of ischemic disease.

A tarsus construct of a novel branched polyethylene with good elasticity for eyelid reconstruction in vivo

Branched polyethylene (B-PE) elastomer was investigated for its potential medical application as a tarsus construct. The in vitro results showed that the B-PE and processed B-PE films or scaffolds did not exhibit noticeable cytotoxicity to the NIH3T3 fibroblasts and human vascular endothelial cells (ECs). The B-PE scaffolds with a pore size of 280–480 µm were prepared by using a gelatin porogen-leaching method. The porous scaffolds implanted subcutaneously in rats exhibited mild inflammatory response, collagen deposition and fast fibrovascularization, suggesting their good biocompatibility. Quantitative real-time PCR analysis showed low expression of pro-inflammatory genes and up-regulated expressions of collagen deposition and vascularization-related genes, validating the results of historical evaluation in a molecular level. The B-PE scaffolds and Medpor controls were transplanted in rabbits with eyelid defects. The B-PE scaffolds exhibited a similar elastic modulus and provided desirable repair effects with mild fibrous capsulation, less eyelid deformities, and were well integrated with the fibrovascular tissue compared with the Medpor controls.

Silencing of RBP‑JK promotes the differentiation of bone marrow mesenchymal stem cells into vascular endothelial cells

Bone marrow mesenchymal stem cells (BM-MSCs) are important for postnatal angiogenesis and are suitable for use in construction of blood vessels by tissue engineering. The present study aimed to investigate the influence of recombination signal binding protein for immunoglobulin kappa J region (RBP-JK) on the differentiation of BM-MSCs into vascular endothelial cells, and to assess the underlying mechanisms. BM-MSCs were isolated and identified by flow cytometry. Lentiviral vectors encoding RBP-JK shRNA (shRBPJK) were constructed to knockdown RBP-JK expression and endothelial differentiation of BM-MSCs was induced. The experimental groups were treated with: empty lentiviral vector (vector group), growth factors (bFGF and VEGF; induced group), shRBPJK (shRBPJK group), and growth factors + shRBPJK (induced + shRBPJK group). The expression of endothelial markers, vascular endothelial growth factor receptor 2 (Flk-1), and von Willebrand factor (vWF) were detected by immunofluorescence. Additionally, in vitro blood vessel formation and phagocytosis were assessed using acetylated LDL, Dil complex and the underlying molecular mechanisms evaluated by western blotting. BM-MSCs were separated and transduced with shRBPJK to reduce RBP-JK expression. Compared with the vector group, the expression of the endothelial cell markers, Flk-1 and vWF, in vitro tubule formation, and phagocytosis ability increased, while the expression levels of p-AKT/AKT and p-NF-κB/NF-κB were significantly decreased (P<0.05) in the induced, shRBPJK, and induced + shRBPJK groups. Compared with the induced group, the expression of Flk-1 and vWF, the number of tubules, and phagocytosis were higher in the induced + shRBPJK group, while the expression levels of p-AKT/AKT and p-NF-κB/NF-κB were lower (P<0.05). Collectively, the present data indicated that silencing of RBP-JK promotes the differentiation of MSCs into vascular endothelial cells, and this process is likely regulated by AKT/NF-κB signaling.

Glycosaminoglycan-based biomaterials for growth factor and cytokine delivery: Making the right choices

Controlled, localized drug delivery is a long-standing goal of medical research, realization of which could reduce the harmful side-effects of drugs and allow more effective treatment of wounds, cancers, organ damage and other diseases. This is particularly the case for protein "drugs" and other therapeutic biological cargoes, which can be challenging to deliver effectively by conventional systemic administration. However, developing biocompatible materials that can sequester large quantities of protein and release them in a sustained and controlled manner has proven challenging. Glycosaminoglycans (GAGs) represent a promising class of bio-derived materials that possess these key properties and can additionally potentially enhance the biological effects of the delivered protein. They are a diverse group of linear polysaccharides with varied functionalities and suitabilities for different cargoes. However, most investigations so far have focused on a relatively small subset of GAGs - particularly heparin, a readily available, promiscuously-binding GAG. There is emerging evidence that for many applications other GAGs are in fact more suitable for regulated and sustained delivery. In this review, we aim to illuminate the beneficial properties of various GAGs with reference to specific protein cargoes, and to provide guidelines for informed choice of GAGs for therapeutic applications.

Orthogonal test design for the optimization of superparamagnetic chitosan plasmid gelatin microspheres that promote vascularization of artificial bone

The optimal conditions for the preparation of superparamagnetic chitosan plasmid (pReceiver‐M29‐VEGF165/DH5a) gelatin microspheres (SPCPGMs) were determined. Then, the performance of the SPCPGMs during neovascularization was evaluated in vivo. The SPCPGMs were prepared through a cross‐linking curing method and then filled into the hollow scaffold of an artificial bone. Neovascularization at the bone defect position was histologically examined in samples collected 2, 4, 6, and 8 weeks after the operation. The cellular magnetofection rate of superparamagnetic chitosan nanoparticles/plasmid (pReceiver‐M29‐VEGF165/DH5a) complexes reached 1–3% under static magnetic field (SMF). Meanwhile, the optimal conditions for SPCPGM fabrication were 20% Fe₃O₄ (w/v), 4 mg of plasmid, 5.3 mg of glutaraldehyde, and 500 rpm of emulsification rotate speed. Under oscillating magnetic fields (OMFs), 4–6 μg of plasmids was released daily for 21 days. Under the combined application of SMF and OMF, evident neovascularization occurred at the bone defect position 6 weeks after the operation. This result is expected to provide a new type of angiogenesis strategy for the research of bone tissue engineering.

Tissue engineered bone mimetics to study bone disorders ex vivo: Role of bioinspired materials

Recent advances in materials development and tissue engineering has resulted in a substantial number of bioinspired materials that recapitulate cardinal features of bone extracellular matrix (ECM) such as dynamic inorganic and organic environment(s), hierarchical organization, and topographical features. Bone mimicking materials, as defined by its self-explanatory term, are developed based on the current understandings of the natural bone ECM during development, remodeling, and fracture repair. Compared to conventional plastic cultures, biomaterials that resemble some aspects of the native environment could elicit a more natural molecular and cellular response relevant to the bone tissue. Although current bioinspired materials are mainly developed to assist tissue repair or engineer bone tissues, such materials could nevertheless be applied to model various skeletal diseases in vitro. This review summarizes the use of bioinspired materials for bone tissue engineering, and their potential to model diseases of bone development and remodeling ex vivo. We largely focus on biomaterials, designed to re-create different aspects of the chemical and physical cues of native bone ECM. Employing these bone-inspired materials and tissue engineered bone surrogates to study bone diseases has tremendous potential and will provide a closer portrayal of disease progression and maintenance, both at the cellular and tissue level. We also briefly touch upon the application of patient-derived stem cells and introduce emerging technologies such as organ-on-chip in disease modeling. Faithful recapitulation of disease pathologies will not only offer novel insights into diseases, but also lead to enabling technologies for drug discovery and new approaches for cell-based therapies.

The effects of biomimetically conjugated VEGF on osteogenesis and angiogenesis of MSCs (human and rat) and HUVECs co-culture models

The purpose of this work was to investigate if the biomimetically conjugated VEGF and HUVECs co-culture could modulate the osteogenic and angiogenic differentiation of MSCs derived from rat and human bone marrow (rMSCs and hMSCs). After treated by ammonia plasma, Poly(lactic-co-glycolic acid) (PLGA) electrospun nanofibers were immobilized with VEGF through heparin to fulfil the sustained release. The proliferation capacity of rMSCs and hMSCs on neat PLGA nanofibers (NF) and VEGF immobilized NF (NF-VEGF) surfaces were assessed by CCK-8 and compared when MSCs were mono-cultured and co-cultured with HUVECs. The effect of VEGF and HUVECs co-culturing on osteogenic and angiogenic differentiation of rMSCs and hMSCs were investigated by calcium deposits and CD31 expression on NF and NF-VEGF surfaces. The results indicated that VEGF has been biomimetically immobilized onto PLGA nanofibers surface and kept sustained release successfully. The CD31 staining results showed that both VEGF and HUVECs co-culture could enhance the angiogenesis of rMSCs and hMSCs. However, the proliferation and osteogenic differentiation of MSCs when cultured with VEGF and HUVECs showed a species dependent response. Taken together, VEGF immobilization and co-culture with HUVECs promoted angiogenesis of MSCs, indicating a good strategy for vascularization in bone tissue engineering.

Mesenchymal Stem Cells Differentiate to Endothelial Cells Using Recombinant Vascular Endothelial Growth Factor -A

BACKGROUND

Vascular endothelial growth factor-A (VEGF-A), an endothelial cell-specific mitogen produced by various cell types, plays important roles in cell differentiation and proliferation. In this study we investigated the effect of recombinant VEGF-A on differentiation of mesenchymal stem cells (MSCs) to endothelial cells (ECs).

METHODS

VEGF-A was expressed in E. coli BL21 (DE3) and BL21 pLysS competent cells with the pET32a expression vector. Recombinant VEGF-A protein expression was verified by SDS-PAGE and western blotting. Mesenchymal stem cell differentiation to ECs in the presence of VEGF-A was evaluated by flow cytometry and fluorescence microscopy.

RESULTS

Recombinant VEGF-A was produced in E. coli BL21 (DE3) cells at 0.8 mg/mL concentration. Expression of CD31 and CD 144 was significantly greater, while expression of CD90, CD73, and CD44 was significantly less, in MSCs treated with our recombinant VEGF-A than in those treated with the commercial protein (p < 0.05).

CONCLUSION

Recombinant VEGF-A expressed in a prokaryotic system can induce MSCs differentiation to ECs and can be used in research and likely therapeutic applications.

Influence of the electrolyte's pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy

Properties of the hydroxyapatite obtained by electrochemical assisted deposition (ED) are dependent on several factors including deposition temperature, electrolyte pH and concentrations, applied potential. All of these factors directly influence the morphology, stoichiometry, crystallinity, electrochemical behaviour, and particularly the coating thickness. Coating structure together with surface micro- and nano-scale topography significantly influence early stages of the implant bio-integration. The aim of this study is to analyse the effect of pH modification on the morphology, corrosion behaviour and in vitro bioactivity and in vivo biocompatibility of hydroxyapatite prepared by ED on the additively manufactured Ti64 samples. The coatings prepared in the electrolytes with pH = 6 have predominantly needle like morphology with the dimensions in the nanometric scale (~30 nm). Samples coated at pH = 6 demonstrated higher protection efficiency against the corrosive attack as compared to the ones coated at pH = 5 (~93% against 89%). The in vitro bioactivity results indicated that both coatings have a greater capacity of biomineralization, compared to the uncoated Ti64. Somehow, the coating deposited at pH = 6 exhibited good corrosion behaviour and high biomineralization ability. In vivo subcutaneous implantation of the coated samples into the white rats for up to 21 days with following histological studies showed no serious inflammatory process.

Bioinspired Composite Matrix Containing Hydroxyapatite-Silica Core-Shell Nanorods for Bone Tissue Engineering

Development of multifunctional bioinspired scaffolds that can stimulate vascularization and regeneration is necessary for the application in bone tissue engineering. Herein, we report a composite matrix containing hydroxyapatite (HA)-silica core-shell nanorods with good biocompatibility, osteogenic differentiation, vascularization, and bone regeneration potential. The biomaterial consists of a crystalline, rod-shaped nanoHA core with uniform amorphous silica sheath (Si-nHA) that retains the characteristic phases of the individual components, confirmed by high-resolution transmission electron microscopy, X-ray diffractometer, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The nanorods were blended with gelatinous matrix to develop as a porous, composite scaffold. The viability and functionality of osteogenically induced mesenchymal stem cells as well as endothelial cells have been significantly improved through the incorporation of Si-nHA within the matrix. Studies in the chicken chorioallantoic membrane and rat models demonstrated that the silica-containing scaffolds not only exhibit good biocompatibility, but also enhance vascularization in comparison to the matrix devoid of silica. Finally, when tested in a critical-sized femoral segmental defect in rats, the nanocomposite scaffolds enhanced new bone formation in par with the biomaterial degradation. In conclusion, the newly developed composite biomimetic scaffold may perform as a promising candidate for bone tissue engineering applications.

High heparin content surface-modified polyurethane discs promote rapid and stable angiogenesis in full thickness skin defects through VEGF immobilization

Three-dimensional scaffolds have the capacity to serve as an architectural framework to guide and promote tissue regeneration. Parameters such as the type of material, growth factors, and pore dimensions are therefore critical in the scaffold's success. In this study, heparin has been covalently bound to the surface of macroporous polyurethane (PU) discs via two different loading methods to determine if the amount of heparin content had an influence on the therapeutic affinity loading and release of (VEGF₁₆₅ ) in full thickness skin defects. PU discs (5.4 mm diameter, 300 µm thickness, and interconnected pore size of 150 µm) were produced with either a low (2.5 mg/g) or high (6.6 mg/g) heparin content (LC and HC respectively), and were implanted into the modified dorsal skin chamber (MDSC) of C57BL/6 J mice with and without VEGF. Both low- and high-content discs with immobilized VEGF₁₆₅ (LCV and HCV, respectively) presented accelerated neovascularization and tissue repair in comparison to heparin discs alone. However, the highest angiogenetic peak was on day 7 with subsequent stabilization for HCV, whereas other groups displayed a delayed peak on day 14. We therefore attribute the superior performance of HCV due to its ability to hold more VEGF_165, based on its increased heparin surface coverage, as also demonstrated in VEGF elution dynamics. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2543-2550, 2017.

Cu2+, Co2+ and Cr3+ doping of a calcium phosphate cement influences materials properties and response of human mesenchymal stromal cells

The application of biologically active metal ions to stimulate cellular reactions is a promising strategy to accelerate bone defect healing. Brushite-forming calcium phosphate cements were modified with low doses of Cu²⁺, Co²⁺ and Cr³⁺. The modified cements released the metal ions in vitro in concentrations which were shown to be non-toxic for cells. The release kinetics correlated with the solubility of the respective metal phosphates: 17-45 wt.-% of Co²⁺ and Cu²⁺, but <1 wt.-% of Cr³⁺ were released within 28days. Moreover, metal ion doping led to alterations in the exchange of calcium and phosphate ions with cell culture medium. In case of cements modified with 50mmol Cr³⁺/mol β-tricalcium phosphate (β-TCP), XRD and SEM analyses revealed a significant amount of monetite and a changed morphology of the cement matrix. Cell culture experiments with human mesenchymal stromal cells indicated that the observed cell response is not only influenced by the released metal ions but also by changed cement properties. A positive effect of modifications with 50mmol Cr³⁺ or 10mmol Cu²⁺ per mol β-TCP on cell behaviour was observed in indirect and direct culture. Modification with Co²⁺ resulted in a clear suppression of cell proliferation and osteogenic differentiation. In conclusion, metal ion doping of the cement influences cellular activities in addition to the effect of released metal ions by changing properties of the ceramic matrix.

Impact of Collagen/Heparin Multilayers for Regulating Bone Cellular Functions

Bone cell interaction with extracellular matrix (ECM) microenvironment is of critical importance when engineering surface interfaces for bone regeneration. In this work layer-by-layer films of type I collagen (coll), the major constituent of bone ECM, and heparin (hep), a glycosaminoglycan, were assembled on poly(l-lactic acid) (PLLA) substrates to evaluate the impact of the biomacromolecular coating on cell activity. The surface modification of PLLA demonstrated that the hep/coll multilayer is stable after 10 bilayers (confirmed by contact angle, infrared spectroscopy, and morphological analysis). This simple approach provided novel information on the effect of heparin on type I collagen hierarchical organization and subsequent cell response of osteoblast-like (MC3T3-E1) and human bone marrow-derived mesenchymal stem cells (hMSCs). Interestingly, the number of deposited heparin layers (1 or 10) appeared to play an important role in the self-assembly of collagen into fibrils, stabilizing the fibrous collagen layer, and potentially impacting hMSCs activity.

Orbital implants: State-of-the-art review with emphasis on biomaterials and recent advances

In the treatment of severe oculo-orbital traumas, intraocular malignancies or other life-threatening conditions it is sometimes necessary to surgically remove the patient's diseased eye. Following the removal of the eye, an orbital implant is inserted into the anophthalmic socket in order to provide satisfactory volume replacement and restore the aesthetic appearance of a normal eye. Over the last decades, the implant design and the criteria of materials selection evolved from simple non-porous polymeric sphere to devices with more complex shape and functionalities for ensuring better clinical outcomes in the long-term. Polymeric and ceramic porous implants have gained prominence since their highly interconnected porous architecture allows them to act as a passive framework for fibrovascular in-growth offering reduced complication rates and the possibility of pegging to enhance the motility of the artificial eye. However, there are still drawbacks to these materials. Some critical aspects of today's orbital implants include the risk of migration and extrusion, postoperative infections and low motility transmitted to the aesthetic ocular prosthesis. Hence, the development of novel biomaterials with enhanced functionalities (e.g. angiogenesis, antibacterial effect, in situ mouldability) which enable an improved outcome of eye replacement is more than ever desirable and represents one of the most challenging topics of research in the field of ocular implants. This review summarizes the evolution of orbital implants and provides an overview of the most recent advances in the field as well as some critical remarks for materials design, selection, characterization and translation to clinical applications.