Design and development of novel MRI compatible zirconium- ruthenium alloys with ultralow magnetic susceptibility

Optimized co-delivery of curcumin and methylprednisolone using polyvinyl alcohol-coated CuO nanoparticles for synergistic rheumatoid arthritis treatment

The combination of methylprednisolone (MPDL) and curcumin (CUR) for treating rheumatoid arthritis (RA) offers several therapeutic advantages. This synergy allows for a reduction in the dosage of methylprednisolone, minimizing potential side effects associated with long-term steroid use while maintaining or enhancing the treatment's effectiveness. The objective of this study is to prepare drug carriers for MPDL and CUR aimed at treating RA, utilizing Freund's Complete Adjuvant-induced arthritic rat model (AIA). CuO nanoparticles (NPs) were synthesized using ultrasound by reducing copper (II) sulfte pentahydrate with sodium borohydride in a basic solution. Subsequently, these nanoparticles were incrementally added to a polyvinyl alcohol (PVA) solution to ensure controlled integration of PVA-coated CuO NPs. Field Emission Scanning Electron Microscopy (FE-SEM) analysis revealed that the CuO nanoparticles and PVA-coated CuO NPs averaged sizes of 50.7 nm and 104.8 nm, respectively. Furthermore, the PVA-coated CuO NPs demonstrated remarkable biocompatibility, with cell viability ranging from 88.1 % to 92.1 % at concentrations of 0.1 μg/mL and 50 μg/mL after 72 h, as validated through the MTT assay. The PVA-coated CuO NPs exhibited a more controlled and gradual drug release profile for both CUR and MPDL when compared to the PVA matrix. CUR@MPDL@PVA-coated CuO NPs demonstrated the most substantial reduction in hind paw swelling and the minimal clinical scores among all treatment groups, signaling enhanced anti-inflammatory effects. CUR@MPDL@PVA-coated CuO NPs also notably reduced the concentrations of pro-inflammatory cytokines TNF-α and IL-1β when measured against the AIA rats and the groups treated with free agents. Therefore, CUR@MPDL@PVA-coated CuO nanoparticles can be used in biomedical applications due to their size, biocompatibility, and anti-inflammatory properties.

Spinodal Zr-Nb alloys with ultrahigh elastic admissible strain and low magnetic susceptibility for orthopedic applications

Metallic biomaterials, such as stainless steels, cobalt-chromium-molybdenum (Co-Cr-Mo) alloys, and titanium (Ti) alloys, have long been used as load-bearing implant materials due to their metallic mechanical strength, corrosion resistance, and biocompatibility. However, their magnetic susceptibility and elastic modulus of more than 100 GPa significantly restrict their therapeutic applicability. In this study, spinodal Zr60Nb40, Zr50Nb50, and Zr40Nb60 (at.%) alloys were selected from the miscibility gap based on the Zr-Nb binary phase diagram and prepared by casting, cold rolling, and aging. Their microstructure, mechanical properties, corrosion resistance, magnetic susceptibility, and biocompatibility were systematically evaluated. Spinodal decomposition to alternating nanoscale Zr-rich β1 and Nb-rich β2 phases occurred in the cold-rolled Zr-Nb alloys during aging treatment at 650 °C. In addition, a minor amount of α phase was precipitated in Zr60Nb40 due to the thermodynamic instability of the Zr-rich β1 phase. Spinodal decomposition significantly improved the mechanical strength of the alloys due to nanosized dual-cubic reinforcement. The Zr-Nb alloys showed an electrochemical corrosion rate of 94-262 nm per year in Hanks' solution because of formation of dense passive films composed of ZrO2 and Nb2O5 during the polarization process. The magnetic susceptibilities of the Zr-Nb alloys were significantly lower than those of commercial Co-Cr-Mo and Ti alloys. The cell viability of the Zr-Nb alloys was more than 98 % toward MC3T3-E1 cells. Overall, the spinodal Zr-Nb alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, extraordinary corrosion resistance, low magnetic susceptibility, and sufficient bicompatibility. STATEMENT OF SIGNIFICANCE: This work reports on spinodal Zr-Nb alloys with heterostructure. Spinodal decomposition significantly improved their mechanical strength due to the nanosized dual-cubic reinforcement. The Zr-Nb alloys showed large corrosion resistance in Hanks' solution because of formation of dense passivation films composed of ZrO2 and Nb2O5 during the polarization process. The magnetic susceptibilities of the Zr-Nb alloys were significantly lower than those of commercial Co-Cr-Mo and Ti alloys. The cell viability of the Zr-Nb alloys was more than 98 % toward MC3T3-E1 cells. The results demonstrate that spinodal Zr-Nb alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, high corrosion resistance, low magnetic susceptibility, and sufficient biocompatibility.

Balloon expandable coronary stent materials: a systematic review focused on clinical success

Balloon expandable coronary stenting has revolutionized the field of interventional cardiology as a potential, minimally invasive modality for treating coronary artery disease. Even though stenting is successful compared to angioplasty (that leaves no stent in place), still there are many associated clinical complications. Bare metal stents are associated with in-stent restenosis caused mostly by neointimal hyperplasia, whereas success of drug-eluting stents comes at the expense of late-stent thrombosis and neoatherosclerosis. Even though innovative and promising, clinical trials with bioabsorbable stents reported thrombosis and a rapid pace of degradation without performing scaffolding action in several instances. It should be noted that a vast majority of these stents are based on a metallic platform which still holds the potential to mitigate major cardiovascular events and reduced economic burden to patients, alongside continuous improvement in stent technology and antiplatelet regimes. Hence, a systematic review was conducted following PRISMA guidelines to assess the clinically relevant material properties for a metallic stent material. From a materials perspective, the major causes identified for clinical failure of stents are inferior mechanical properties and blood-material interaction-related complications at the stent surface. In addition to these, the stent material should possess increased radiopacity for improved visibility and lower magnetic susceptibility values for artefact reduction. Moreover, the review provides an overview of future scope of percutaneous coronary interventional strategy. Most importantly, this review highlights the need for an interdisciplinary approach by clinicians, biomaterial scientists, and interventional cardiologists to collaborate in mitigating the impediments associated with cardiovascular stents for alleviating sufferings of millions of people worldwide.

Graphical abstract

Formulation and Characterization of Poly (Ethylene Glycol)-Coated Core-Shell Methionine Magnetic Nanoparticles as a Carrier for Naproxen Delivery: Growth Inhibition of Cancer Cells

Simple Summary

Naproxen was loaded onto a magnetic nanoparticle coated with polyethylene glycol. Magnetic nanoparticles (MNPs) were used in this study to develop a smart naproxen delivery system. One of the most potent COX-1 and COX-2 inhibitors is naproxen, which belongs to the NSAID family of drugs. Although this drug has a short half-life, it has considerable toxicities and side effects on gastrointestinal tissues. The significant potential of our proposed nanocarrier for biomedical applications has been widely recognized; we modified MNPs to attach to this drug via disulfide bonds, promote the selective release of naproxen in inflammatory cells, and prevent adverse effects on the digestive system. It was found that the cytotoxicity of the drug was lowered by this change, which prevented unspecific protein binding.

Abstract

An efficient and selective drug delivery vehicle for cancer cells can remarkably improve therapeutic approaches. In this study, we focused on the synthesis and characterization of magnetic Ni_1−xCo_xFe₂O₄ nanoparticles (NPs) coated with two layers of methionine and polyethylene glycol to increase the loading capacity and lower toxicity to serve as an efficient drug carrier. Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs were synthesized by a reflux method then characterized by FTIR, XRD, FESEM, TEM, and VSM. Naproxen was used as a model drug and its loading and release in the vehicles were evaluated. The results for loading efficiency showed 1 mg of Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs could load 0.51 mg of the naproxen. Interestingly, Ni_1−xCo_xFe₂O₄@Methionine@PEG showed a gradual release of the drug, achieving a time-release up to 5 days, and demonstrated that a pH 5 release of the drug was about 20% higher than Ni_1−xCo_xFe₂O₄@Methionine NPs, which could enhance the intracellular drug release following endocytosis. At pH 7.4, the release of the drug was slower than Ni_1−xCo_xFe₂O₄@Methionine NPs; demonstrating the potential to minimize the adverse effects of anticancer drugs on normal tissues. Moreover, naproxen loaded onto the Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs for breast cancer cell lines MDA-MB-231 and MCF-7 showed more significant cell death than the free drug, which was measured by an MTT assay. When comparing both cancer cells, we demonstrated that naproxen loaded onto the Ni_1−xCo_xFe₂O₄@Methionine@PEG NPs exhibited greater cell death effects on the MCF-7 cells compared with the MDA-MB-231 cells. The results of the hemolysis test also showed good hemocompatibility. The results indicated that the prepared magnetic nanocarrier could be suitable for controlled anticancer drug delivery.

Tailoring biocompatible Ti-Zr-Nb-Hf-Si metallic glasses based on high-entropy alloys design approach

Present work unveils novel magnetic resonance imaging (MRI) compatible glassy Ti-Zr-Nb-Hf-Si alloys designed based on a high entropy alloys approach, by exploring the central region of multi-component alloy phase space. Phase analysis has revealed the amorphous structure of developed alloys, with a higher thermal stability than the conventional metallic glasses. The alloys exhibit excellent corrosion properties in simulated body fluid. Most importantly, the weak paramagnetic nature (ultralow magnetic susceptibility) and superior radiopacity (high X-ray attenuation coefficients) offer compatibility with medical diagnostic imaging systems thereby opening unexplored realms for biomedical applications.

Appraising the potential of Zr-based biomedical alloys to reduce magnetic resonance imaging artifacts

This study compared Zr-Mo alloys with commercial metallic biomaterials. It was observed that the Zr-Mo alloys exhibited favourable mechanical properties, particularly the Zr-10Mo alloy, which showed the highest strength to Young's modulus ratio among all evaluated metals. These alloys also exhibited the lowest magnetic susceptibilities, which are important for magnetic resonance imaging (MRI). However, both Zr- and Ti-based metals yielded comparable artifacts. It was concluded that the magnetic susceptibility must differ considerably to afford significantly improved MRI quality owing to the increased importance of non-susceptibility-related artifacts when comparing materials with relatively similar magnetic susceptibilities.

In situ targeted MRI detection of Helicobacter pylori with stable magnetic graphitic nanocapsules

Helicobacter pylori infection is implicated in the aetiology of many diseases. Despite numerous studies, a painless, fast and direct method for the in situ detection of H. pylori remains a challenge, mainly due to the strong acidic/enzymatic environment of the gastric mucosa. Herein, we report the use of stable magnetic graphitic nanocapsules (MGNs), for in situ targeted magnetic resonance imaging (MRI) detection of H. pylori. Several layers of graphene as the shell effectively protect the magnetic core from corrosion while retaining the superior contrast effect for MRI in the gastric environment. Boronic-polyethylene glycol molecules were synthesized and modified on the MGN surface for targeted MRI detection. In a mouse model of H. pylori-induced infection, H. pylori was specifically detected through both T₂-weighted MR imaging and Raman gastric mucosa imaging using functionalized MGNs. These results indicated that enhancement of MRI using MGNs may be a promising diagnostic and bioimaging platform for very harsh conditions.

Impact of ruthenium on mechanical properties, biological response and thermal processing of β-type Ti-Nb-Ru alloys

In this paper, we present further work on the influence of minor additions of Ru to the Ti-20Nb alloy system, with a primary focus on mechanical properties of the as-cast material, along with microstructural response to elevated temperatures. Findings include high as-cast strengths and admissible strain values, up to 920MPa and 1.5% respectively, along with moduli down to approximately 65GPa in the as-cast state. Together with a significant increase in cell proliferation under MTS assay relative to controls, this indicates the chosen alloy system has significant promise for application in porous orthopaedic biomaterials, in particular those alloys with 0.5-1.0% Ru are deemed most suitable. Given their promise, preliminary investigation of the alloy system's response to thermal treatment was also undertaken.

STATEMENT OF SIGNIFICANCE

The presented research, an investigation into the mechanical properties and response to thermal treatments of Ru-containing Ti-20Nb-base alloys, holds significance in the field of metallic biomaterials due to the heretofore limited investigation into the impact of Ru on the properties of biomedical, β-phase, Ti-based alloys. Given Ru's known beneficial impact on corrosion resistance, experimental confirmation of the impact of addition on mechanical properties was needed; that suitable mechanical properties, including yield strengths up to ∼930MPa along with elastic admissible strains approaching 1.5%, were achieved is both promising in and of itself, and of significant note for further research into the field. Preliminary thermal and cell-proliferation studies are additionally provided to inform further studies.

Significantly enhanced osteoblast response to nano-grained pure tantalum

Tantalum (Ta) metal is receiving increasing interest as biomaterial for load-bearing orthopedic applications and the synthetic properties of Ta can be tailored by altering its grain structures. This study evaluates the capability of sliding friction treatment (SFT) technique to modulate the comprehensive performances of pure Ta. Specifically, novel nanocrystalline (NC) surface with extremely small grains (average grain size of ≤20 nm) was fabricated on conventional coarse-grained (CG) Ta by SFT. It shows that NC surface possessed higher surface hydrophilicity and enhanced corrosion resistance than CG surface. Additionally, the NC surface adsorbed a notably higher percentage of protein as compared to CG surface. The in vitro results indicated that in the initial culture stages (up to 24 h), the NC surface exhibited considerably enhanced osteoblast adherence and spreading, consistent with demonstrated superior hydrophilicity on NC surface. Furthermore, within the 14 days culture period, NC Ta surface exhibited a remarkable enhancement in osteoblast cell proliferation, maturation and mineralization as compared to CG surface. Ultimately, the improved osteoblast functions together with the good mechanical and anti-corrosion properties render the SFT-processed Ta a promising alternative for the load-bearing bone implant applications.