Photonic microstructures for energy-generating clear glass and net-zero energy buildings

Planar solar concentrator composed of stacked waveguides with arc-segment structures and movable receiving assemblies

In this study, we proposed a two-staged, transparent, planar solar concentrator composed of stacked waveguide sheets with an arc-segment structure array and movable receiving assemblies, which operated in a hybrid tracking approach. The stacked waveguide sheets carrying the arc-segment structures as TIR collectors could provide high concentration ratios and coupling efficiency with wide angular tolerance in the first stage. The following movable receiving assembly composed of light guide channels (LGCs) and compound parabolic collectors (CPCs) laterally slid according to the incidence angles to receive the earlier concentrated light for further concentration and provide the PV cells on the ends of CPCs with uniform irradiance in the second stage. The simulation results demonstrated that the optimal model could provide an average efficiency of 0.87, an average uniformity of 0.875, and an average concentration ratio of 738 over a whole year regarding the light source with AM 1.5D wavelengths in the working range of PV cells.

Improving power conversion efficiency in luminescent solar concentrators using nanoparticle fluorescence and scattering

Large-size luminescent solar concentrators (LSCs), which act as a complement to silicon-based photovoltaic (Si-PV) systems, still suffer from low power conversion efficiency (PCE). How to improve the performance of LSCs, especially large ones, is currently a hot research topic. Traditional LSCs have only a single transmission mode of fluorescence from the luminescent materials to the Si-PV, but here we introduce a new idea to improve the absorption of Si-PV by employing dual transmission modes of both fluorescence and scattering light. To prepare LSCs with dual mode transmission, Si-PV systems are coupled around the edges of a light-harvesting slice, which is prepared by ultraviolet light-induced polymerization of methyl methacrylate (MMA) solution containing both luminescent CsPbBr₃ and TiO₂ nanocrystals (NCs). When the sun light or incident light is coupled into the light-harvesting slice, CsPbBr₃ NCs can convert the incident light into fluorescence, and then partly transmit to Si-PV at the edges, where the light is finally converted into electrical energy. Besides the traditional fluorescence transmission mode, the addition of TiO₂ brings another transmission mode, namely the scattering of incident light to Si-PV, leading to an increase in PCE. In comparison to that of pure CsPbBr₃-based LSCs without the addition of TiO₂ (0.97%), the PCE of TiO₂-doped LSCs with a large size of 20 cm × 20 cm is improved to 1.82%. The maximal PCE appears for LSCs with a size of 5 cm × 5 cm, reaching 2.62%. The reported method of dual transmission modes is a new alternative way to improve the performance of LSC devices, which does not need to change the optical properties of luminescent materials. Moreover, the production process is simple, low-cost and suitable for preparing large area LSCs, further promoting the application of LSCs.

Increasing the Yield of Lactuca sativa, L. in Glass Greenhouses through Illumination Spectral Filtering and Development of an Optical Thin Film Filter

With the increase in world population, the continued advances in modern greenhouse agriculture and plant growth practices are expected to help overcome the global problem of future food shortages. The next generation greenhouse design practices will need to address a range of issues, ranging from energy and land use efficiency to providing plant-optimized growth techniques. In this paper, we focus on investigating the optimum irradiation spectra matched to the lettuce species (Lactuca sativa, L.), commonly grown in greenhouse environments, in order to develop low-emissivity glass panes that maximize the biomass productivity of glass greenhouses. This low-emissivity glass passes the solar spectral components needed for crop growth, while rejecting other unwanted radiations. This could potentially lead to significant energy savings and other beneficial effects related to greenhouse climate control, in a range of climates. The experimental results show that substantial biomass productivity improvements in lettuce (up to approximately 14.7%) can be attained by using spectrally optimized illumination, instead of white light illumination. This optimized wavelength is then demonstrated as being used to develop an advanced metal-dielectric thin-film filter that produces the optimized illumination spectrum when exposed to sunlight.

Dual Thermal-/Electrical-Responsive Luminescent ‘Smart’ Window

As buildings are a large energy user, it is important to not only reduce their consumption, but also have them generate their own electricity. Here, we describe a smart window that could reduce electricity consumption, normally used for air conditioning and lighting, by absorbing excess solar radiation with dichroic fluorescent dye molecules aligned in a switchable liquid crystal host and guiding the re-emitted light energy to the edges of the device, where it can be used to generate electricity via attached photovoltaic cells. The liquid crystals are responsive both to temperature changes and applied electrical fields. At higher temperatures, transmission decreases due to increased disorder in the liquid crystals, while the application of an electrical field increases transmission by effectively realigning the dyes for minimal absorption. Using alternative configurations, a window with a transparent rest state was also produced, in which transmission can be decreased by applying an electrical field; the thermal response remains identical.

Initial Field Testing Results from Building-Integrated Solar Energy Harvesting Windows Installation in Perth, Australia

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping center entrance porch and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An overview of the current and future application potential of high-transparency, visually-clear solar window-based curtain wall installations suitable for practical building integration is provided.

Recent Developments in Solar Energy-Harvesting Technologies for Building Integration and Distributed Energy Generation

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on recent cutting-edge results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

Semi-Transparent Energy-Harvesting Solar Concentrator Windows Employing Infrared Transmission-Enhanced Glass and Large-Area Microstructured Diffractive Elements

We report on the study of energy-harvesting performance in medium-size (400 cm2) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the up-scaling of semitransparent solar window dimensions. Results of photovoltaic characterization of several solar concentrators employing different internal glazing-system structure and diffractive elements produced using different technologies are reported and discussed.

Directional Emission of Fluorescent Dye-Doped Dielectric Nanogratings for Lighting Applications

By structuring a luminescent dielectric interface as a relief diffraction grating with nanoscale features, it is possible to control the intensity and direction of the emitted light. The composite structure of the grating is based on a fluorescent dye (Lumogen F RED 305) dispersed in a polymeric matrix (poly(methyl methacrylate)). Measurements demonstrate a significant enhancement of the emitted light for specific directions and wavelengths when the grating interface is compared to nonstructured thin films made of the same material. In particular, the maximum enhancement of photoluminescence for a given pump wavelength is obtained at an angle of incidence that is close to the Rayleigh anomaly condition for the first-order diffracted waves. In this condition, the maximum extinction of incident light is observed. Upon excitation with coherent and monochromatic sources, photoluminescence plots show that the Rayleigh anomalies confine the angular interval of the emitted light. Being the anomalies  directly related to the pitch of the diffraction grating, the system can be thus implemented as an optical device whose directional emission can be designed for specific applications. The exploitation of nanoimprinting techniques for the fabrication of the luminescent grating enables production of the device on large areas, paving the way for low-cost lighting and solar applications.

Modeling Diffractive Lenses Recording in Environmentally Friendly Photopolymer

The improvements made in diffusion models simulating phase image recording in photopolymers enable the optimization of a wide range of complex diffractive optical elements (DOEs), while the miniaturization of spatial light modulators makes it possible to generate both symmetric and non-symmetric DOEs. In addition, there is increasing interest in the design of new friendly recording materials. In this respect, photopolymers are a promising material due to their optical properties. In this paper, we show a procedure to record diffractive spherical lenses using a nontoxic optimized photopolymer. To achieve this goal, we followed three steps: first, the chemical optimization for DOE recording; second, the recording material characterization to be simulated by a three-dimensional diffusion model; and third, the evaluation of the coverplating for the conservation of the DOE.