Hybrid bright-field and hologram imaging of cell dynamics

Simple and low-cost microscopy setup for 3D particle field measurement using incoherent illumination and open-source hardware

The quantification of 3D particle field is of interest for a vast range of fields. While in-line particle holography (PH) can provide high-resolution measurements of particles, it suffers from speckle noise. Plenoptic imaging (PI) is less susceptible to speckle noises, but it involves a trade-off between spatial and angular resolution, rendering images with low resolution. Here, we report a simple microscopy setup with the goals of getting the strengths of both techniques. It is built with off-the-shelf and cost-effective components including a photographic lens, a diaphragm, and a CCD camera. The cost of the microscopy setup is affordable to small labs and individual researchers. The pupil plane of the proposed setup can be mechanically accessible, allowing us to implement pupil plane modulation and increase the depth of field (DOF) without requiring any additional relay lenses. It also allows us to understand the working principle of pupil plane modulation clearly, benefiting microscopy education. It illuminates the sample (particles) using diffuse white light, and thus avoids the problem of speckle noise. It captures multiple perspective images via pupil plane modulation, without requiring trading off angular and spatial resolution. We validate the setup with 2D and 3D particle samples. RESEARCH HIGHLIGHTS: We report a simple and cost-effective microscopy setup with the goals of getting the strengths of plenoptic imaging and in-line particle holography. It is built with off-the-shelf and cost-effective components. The cost of the microscopy setup is affordable to small labs and individual researchers. The pupil plane of the proposed setup can be mechanically accessible, allowing us to implement pupil plane modulation and increase the DOF without requiring any additional relay lenses. It also allows us to understand the working principle of pupil plane modulation clearly, benefiting microscopy education. It illuminates the sample (particles) using diffuse white light, and thus avoids the problem of speckle noise. It captures multiple perspective images via pupil plane modulation, without requiring trading off angular and spatial resolution. We validate the setup with 2D and 3D particle samples.

Focal adhesion dynamics in cellular function and disease

Acting as a bridge between the cytoskeleton of the cell and the extra cellular matrix (ECM), the cell-ECM adhesions with integrins at their core, play a major role in cell signalling to direct mechanotransduction, cell migration, cell cycle progression, proliferation, differentiation, growth and repair. Biochemically, these adhesions are composed of diverse, yet an organised group of structural proteins, receptors, adaptors, various enzymes including protein kinases, phosphatases, GTPases, proteases, etc. as well as scaffolding molecules. The major integrin adhesion complexes (IACs) characterised are focal adhesions (FAs), invadosomes (podosomes and invadopodia), hemidesmosomes (HDs) and reticular adhesions (RAs). The varied composition and regulation of the IACs and their signalling, apart from being an integral part of normal cell survival, has been shown to be of paramount importance in various developmental and pathological processes. This review per-illustrates the recent advancements in the research of IACs, their crucial roles in normal as well as diseased states. We have also touched on few of the various methods that have been developed over the years to visualise IACs, measure the forces they exert and study their signalling and molecular composition. Having such pertinent roles in the context of various pathologies, these IACs need to be understood and studied to develop therapeutical targets. We have given an update to the studies done in recent years and described various techniques which have been applied to study these structures, thereby, providing context in furthering research with respect to IAC targeted therapeutics.

Deep learning-based hologram generation using a white light source

Digital holographic microscopy enables the recording of sample holograms which contain 3D volumetric information. However, additional optical elements, such as partially or fully coherent light source and a pinhole, are required to induce diffraction and interference. Here, we present a deep neural network based on generative adversarial network (GAN) to perform image transformation from a defocused bright-field (BF) image acquired from a general white light source to a holographic image. Training image pairs of 11,050 for image conversion were gathered by using a hybrid BF and hologram imaging technique. The performance of the trained network was evaluated by comparing generated and ground truth holograms of microspheres and erythrocytes distributed in 3D. Holograms generated from BF images through the trained GAN showed enhanced image contrast with 3-5 times increased signal-to-noise ratio compared to ground truth holograms and provided 3D positional information and light scattering patterns of the samples. The developed GAN-based method is a promising mean for dynamic analysis of microscale objects with providing detailed 3D positional information and monitoring biological samples precisely even though conventional BF microscopic setting is utilized.

Digital Holographic Multimodal Cross-Sectional Fluorescence and Quantitative Phase Imaging System

We present a multimodal imaging system based on simple off-axis digital holography, for simultaneous recording and retrieval of cross-sectional fluorescence and quantitative phase imaging of the biological specimen. Synergism in the imaging capabilities can be achieved by incorporating two off-axis digital holographic microscopes integrated to record different information at the same time. The cross-sectional fluorescence imaging is realized by a common-path configuration of the single-shot off-axis incoherent digital holographic system. The quantitative phase imaging, on the other hand, is achieved by another off-axis coherent digital holographic microscopy operating in transmission mode. The fundamental characteristics of the proposed multimodal system are confirmed by performing various experiments on fluorescent beads and fluorescent protein-labeled living cells of the moss Physcomitrella patens lying at different axial depth positions. Furthermore, the cross-sectional live fluorescence and phase imaging of the fluorescent beads are demonstrated by the proposed multimodal system. The experimental results presented here corroborate the feasibility of the proposed system and indicate its potential in the applications to analyze the functional and structural behavior of biological cells and tissues.

Self-calibrated microscopic dual-view tomographic holography for 3D flow measurements

This paper introduces the application of microscopic dual-view tomographic holography (M-DTH) to measure the 3D position and motion of micro-particles located in dense suspensions. Pairing of elongated traces of the same particle in the two inclined reconstructed fields requires precise matching of the entire sample volume that accounts for the inherent distortions in each view. It is achieved by an iterative volumetric self-calibration method, consisting of mapping one view onto the next, dividing the sample volume into slabs, and cross-correlating the two views. Testing of the procedures using synthetic particle fields with imposed distortion and realistic errors in particle locations shows that the self-calibration method achieves a 3D uncertainty of about 1µm, a third of the particle diameter. Multiplying the corrected intensity fields is used for truncating the elongated traces, whose centers are located within 1µm of the exact value. Without correction, only a small fraction of the traces even overlap. The distortion correction also increases the number of intersecting traces in experimental data along with their intensity. Application of this method for 3D velocity measurements is based on the centroids of the truncated/shortened particle traces. Matching of these traces in successive fields is guided by several criteria, including results of volumetric cross-correlation of the multiplied intensity fields. The resulting 3D velocity distribution is substantially more divergence-free, i.e., satisfies conservation of mass, compared to analysis performed using single-view data. Sample application of the new method shows the 3D flow structure around a pair of cubic roughness elements embedded in the inner part of a high Reynolds number turbulent boundary layer.