Construction of CuS/Au Heterostructure through a Simple Photoreduction Route for Enhanced Electrochemical Hydrogen Evolution and Photocatalysis

CuS-NiTe2 embedded phosphorus-doped graphene oxide catalyst for evaluating hydrogen evolution reaction

The hydrogen evolution reaction (HER), a crucial half-reaction in the water-splitting process, is hindered by slow kinetics, necessitating efficient electrocatalysts to lower overpotential and enhance energy conversion efficiency. Transition-metal electrode materials, renowned for their robustness and effectiveness, have risen to prominence as primary contenders in the field of energy conversion and storage research. In this investigation, we delve into the capabilities of transition metals when employed as catalysts for the HER. Furthermore, we turn our attention to carbon nanomaterials like graphene, which have exhibited tremendous potential as top-performing electrocatalysts. Nevertheless, advancements are indispensable to expand their utility and versatility. One such enhancement involves the integration of phosphorus-doped graphene. Our research focuses on the synthesis of CuS-NiTe2/PrGO, a nanocomposite with a crystalline structure, through a straightforward method. This nanocomposite exhibits enhanced catalytic activity for the HER, boasting a Tafel slope of 57 mV dec-1 in an acidic environment. Consequently, our findings present a straightforward and efficient approach to developing high-performance electrocatalysts for HER.

Vacancy Engineering in 2D Transition Metal Chalcogenide Photocatalyst: Structure Modulation, Function and Synergy Application

Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.

2D Monolayer Catalysts: Towards Efficient Water Splitting and Green Hydrogen Production

A viable alternative to non-renewable hydrocarbon fuels is hydrogen gas, created using a safe, environmentally friendly process like water splitting. An important role in water-splitting applications is played by the development of two-dimensional (2D) layered transition metal chalcogenides (TMDCs), transition metal carbides (MXenes), graphene-derived 2D layered nanomaterials, phosphorene, and hexagonal boron nitride. Advanced synthesis methods and characterization instruments enabled an effective application for improved electrocatalytic water splitting and sustainable hydrogen production. Enhancing active sites, modifying the phase and electronic structure, adding conductive elements like transition metals, forming heterostructures, altering the defect state, etc., can improve the catalytic activity of 2D stacked hybrid monolayer nanomaterials. The majority of global research and development is focused on finding safer substitutes for petrochemical fuels, and this review summarizes recent advancements in the field of 2D monolayer nanomaterials in water splitting for industrial-scale green hydrogen production and fuel cell applications.

Trimetallic CuO/Ag/NiO supported with silica nanoparticles based composite materials for green hydrogen production

Production and utilization of grey and blue hydrogen is responsible for emission of millions of tons of carbon dioxide (CO2) across the globe. This increased emission of CO2 has severe repercussions on the planet earth and in particular on climate change. Here in, we explored advance bimetallic (BM) CuO/Ag and trimetallic (TM) CuO/Ag/NiO based nanoporous materials supported with silica nanoparticles (SiNPs) via sol-gel route. The explored nanocatalysts were characterized by Powder X-ray diffraction (P-XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), and Raman spectroscopic techniques. These advance nanocatalysts were evaluated for the green hydrogen production through electrocatalysis and photocatalysis. The catalysts exhibited an exceptional catalytic performance, the onset potential for hydrogen evolution reaction (HER) was determined to be - 0.9 V BMSiNPs-GCE and - 0.7 V (vs Ag/AgCl) for TMSiNPs-GCE, whereas η@10 for BMSiNPs-GCE and TMSiNPs-GCE is - 1.26 and - 1.00 V respectively. Significantly, the TMSiNPs composite and the BMSiNPs composite exhibited superior photochemical H2 evolution rates of 1970.72 mmol h-1 g-1 and 1513.97 mmol h-1 g-1, respectively. The TMSiNPs catalyst presents a highly promising material for HER. This study reveals a cost-effective approach to develop sustainable and resourceful electrocatalysts for HER.

Surface Reconstruction of Covellite CuS Nanocrystals for Enhanced OER Catalytic Performance in Alkaline Solution

Oxygen evolution reaction (OER) is one of the important half-reactions in energy conversion equipment such as water-spitting devices, rechargeable metal-air batteries, and so on. It is beneficial to develop efficient and low-cost catalysts that understand the reaction mechanism of OER and analyze the reconstruction phenomenon of transition metal sulfide. Interestingly, copper sulfide and cuprous sulfide with the same components possess different reconstruction behaviors due to their different metal ion valence states and different atomic arrangement modes. Because of a unique atomic arrangement sequence and certain cationic defects, the reconstruction phenomenon of CuS nanomaterials are that S2- is firstly oxidized to SO4 2- and then Cux + is converted into CuO via Cu(OH)2 . In addition, the specific "modified hourglass structure" of CuS with excellent conductivity is easier to produce intermediates. Compared with Cu2 S, CuS exhibits excellent OER activity with a lower overpotential of 192 mV at 10 mA cm-2 and remarkable electrochemical stability in 1.0 m KOH for 120 h. Herein, this study elucidates the reconstruction modes of CuS and Cu2 S in the OER process and reveals that CuS has a stronger CuS bond and a faster electronic transmission efficiency due to "modified hourglass structure," resulting in faster reconstruction of CuS than Cu2 S.

Snowflake-like Metastable Wurtzite CuGaS2/MoS2 Composite with Superior Electrochemical HER Activity

In the present work, we report the synthesis of wurtzite CuGaS₂ and its composite with MoS₂ and explored their efficacy toward two important applications, viz. electrocatalytic hydrogen evolution reaction (HER) and adsorption of Rhodamine B dye. The CuGaS₂ was synthesized via a low-temperature ethylenediamine-mediated solvothermal method. The obtained products were characterized by various techniques such as X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy to ascertain the phase formation, surface morphology, and elemental oxidation states. The electrocatalytic activity of the wurtzite CuGaS₂ and CuGaS₂/MoS₂ composites toward HER was investigated, wherein the CuGaS₂/MoS₂ composite exhibited superior activity when compared to the pristine sample with a small Tafel slope of 56.2 mV dec^-1 and an overpotential value of -464 mV at the current density of 10 mA cm^-2. On the other hand, the synthesized CuGaS₂ also showed an impressive adsorption behavior toward Rhodamine B dye with 99% adsorption in 60 min, which is relatively better than that observed with the composite material.

Chalcogenides and Chalcogenide-Based Heterostructures as Photocatalysts for Water Splitting

Chalcogenides are essential in the conversion of solar energy into hydrogen fuel due to their narrow band gap energy. Hydrogen fuel could resolve future energy crises by substituting carbon fuels owing to zero-emission carbon-free gas and its eco-friendliness. The fabrication of different metal chalcogenide-based photocatalysts with enhanced photocatalytic water splitting have been summarized in this review. Different modifications of these chalcogenides, including coupling with another semiconductor, metal loading, and doping, are fabricated with different synthetic routes that can remarkably improve the photo-exciton separation and have been extensively investigated for photocatalytic hydrogen generation. In this direction, this review is undertaken to provide an overview of the enhanced photocatalytic performance of the binary and ternary chalcogenide heterostructures and their mechanisms for hydrogen production under irradiation of light.

High-Density-Nanotips-Composed 3D Hierarchical Au/CuS Hybrids for Sensitive, Signal-Reproducible, and Substrate-Recyclable SERS Detection

Surface-enhanced Raman scattering (SERS) provides an unprecedented opportunity for fingerprinting identification and trace-level detection in chemistry, biomedicine, materials, and so on. Although great efforts have been devoted to fabricating sensitive plasmonic nanomaterials, it is still challenging to batch-produce a SERS substrate with high sensitivity, good reproducibility, and perfect recyclability. Here, we describe a facile fabrication of three-dimensional (3D) hierarchical Au/CuS nanocomposites, in which high-density Au nanotips enable highly SERS-active sensing, and the well-defined microflower (MF) geometry produces perfect signal reproducibility (RSD < 5%) for large laser spot excitations (>50 μm2), which is particularly suitable for practical on-site detection with a handheld Raman spectrometer. In addition, a self-cleaning ability of this Au/CuS Schottky junction photocatalyst under sunlight irradiation allows complete removal of the adsorbed analytes, realizing perfect regeneration of the SERS substrates over many cycles. The mass-production, ultra-sensitive, high-reproducibility, and fast-recyclability features of hierarchical Au/CuS MFs greatly facilitate cost-effective and field SERS detection of trace analytes in practice.

Fabrication and Characterization of Nanostructured Rock Wool as a Novel Material for Efficient Water-Splitting Application

Rock wool (RW) nanostructures of various sizes and morphologies were prepared using a combination of ball-mill and hydrothermal techniques, followed by an annealing process. Different tools were used to explore the morphologies, structures, chemical compositions and optical characteristics of the samples. The effect of initial particle size on the characteristics and photoelectrochemical performance of RW samples generated hydrothermally was investigated. As the starting particle size of ball-milled natural RW rises, the crystallite size of hydrothermally formed samples drops from 70.1 to 31.7 nm. Starting with larger ball-milled particle sizes, the nanoparticles consolidate and seamlessly combine to form a continuous surface with scattered spherical nanopores. Water splitting was used to generate photoelectrochemical hydrogen using the samples as photocatalysts. The number of hydrogen moles and conversion efficiencies were determined using amperometry and voltammetry experiments. When the monochromatic wavelength of light was increased from 307 to 460 nm for the manufactured RW>0.3 photocatalyst, the photocurrent density values decreased from 0.25 to 0.20 mA/mg. At 307 nm and +1 V, the value of the incoming photon-to-current efficiency was ~9.77%. Due to the stimulation of the H+ ion rate under the temperature impact, the Jph value increased by a factor of 5 when the temperature rose from 40 to 75 °C. As a result of this research, for the first time, a low-cost photoelectrochemical catalytic material is highlighted for effective hydrogen production from water splitting.

Electrochemically Derived Crystalline CuO from Covellite CuS Nanoplates: A Multifunctional Anode Material

In the present era, electrochemical water splitting has been showcased as a reliable solution for alternative and sustainable energy development. The development of a cheap, albeit active, catalyst to split water at a substantial overpotential with long durability is a perdurable challenge. Moreover, understanding the nature of surface-active species under electrochemical conditions remains fundamentally important. A facile hydrothermal approach is herein adapted to prepare covellite (hexagonal) phase CuS nanoplates. In the covellite CuS lattice, copper is present in a mixed-valent state, supported by two different binding energy values (932.10 eV for Cu^I and 933.65 eV for Cu^II) found in X-ray photoelectron spectroscopy analysis, and adopted two different geometries, that is, trigonal planar preferably for Cu^I and tetrahedral preferably for Cu^II. The as-synthesized covellite CuS behaves as an efficient electro(pre)catalyst for alkaline water oxidation while deposited on a glassy carbon and nickel foam (NF) electrodes. Under cyclic voltammetry cycles, covellite CuS electrochemically and irreversibly oxidized to CuO, indicated by a redox feature at 1.2 V (vs the reversible hydrogen electrode) and an ex situ Raman study. Electrochemically activated covellite CuS to the CuO phase (termed as CuS_EA) behaves as a pure copper-based catalyst showing an overpotential (η) of only 349 (±5) mV at a current density of 20 mA cm^-2, and the TOF value obtained at η₃₄₉ (at 349 mV) is 1.1 × 10^-3 s^-1. A low R_ct of 5.90 Ω and a moderate Tafel slope of 82 mV dec^-1 confirm the fair activity of the CuS_EA catalyst compared to the CuS precatalyst, reference CuO, and other reported copper catalysts. Notably, the CuS_EA/NF anode can deliver a constant current of ca. 15 mA cm^-2 over a period of 10 h and even a high current density of 100 mA cm^-2 for 1 h. Post-oxygen evolution reaction (OER)-chronoamperometric characterization of the anode via several spectroscopic and microscopic tools firmly establishes the formation of crystalline CuO as the active material along with some amorphous Cu(OH)₂ via bulk reconstruction of the covellite CuS under electrochemical conditions. Given the promising OER activity, the CuS_EA/NF anode can be fabricated as a water electrolyzer, Pt(-)//(+)CuS_EA/NF, that delivers a j of 10 mA cm^-2 at a cell potential of 1.58 V. The same electrolyzer can further be used for electrochemical transformation of organic feedstocks like ethanol, furfural, and 5-hydroxymethylfurfural to their respective acids. The present study showcases that a highly active CuO/Cu(OH)₂ heterostructure can be constructed in situ on NF from the covellite CuS nanoplate, which is not only a superior pure copper-based electrocatalyst active for OER and overall water splitting but also for the electro-oxidation of industrial feedstocks.

Bimetallic copper nickel sulfide electrocatalyst by one step chemical bath deposition for efficient and stable overall water splitting applications

Transition metal sulfides have been intensively investigated as an effective catalyst for overall water splitting application due to their inexorable bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activity. However, the chalcogenides are oxidised during the OER process and hence limit the stability of the electrocatalyst. The synthesized materials should have a higher oxidation state corresponding to the active species in order to improve the stability. In this study, we have employed a one-step chemical bath deposition (CBD) route to synthesis bimetallic copper nickel sulfide (CuNiS) electrocatalyst. We have accomplished a superior OER electrocatalytic activity with a lower overpotential of 337 mV at 10 mA/cm² current density and a small Tafel slope of 43 mV/dec. Also, we have achieved an excellent HER activity with a very low overpotential of 99 mV at 10 mA/cm² and a Tafel slope of 63 mV/dec. The constructed electrolyzer attained a lower cell voltage of only 1.55 V to reach the current density of 10 mA/cm²_. The stability test carried at a high current density of 200 mA/cm² for 50 h showed less than 5% increase in Ni³⁺ active species at the surface ensure the stable performance nature. Thus, this work provides a promising methodology for the synthesis of bimetallic sulfides for enhanced electrocatalytic water splitting with exceptional reliability.

Microwave-Assisted Synthesis of Bi2S3 and Sb2S3 Nanoparticles and Their Photoelectrochemical Properties

Bi₂S₃ and Sb₂S₃ nanoparticles were prepared by microwave irradiation of single-source precursor complexes in the presence of ethylene glycol as a coordinating solvent. The as-synthesized nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) coupled with energy-dispersive X-ray (EDX), photoluminescence (PL), and UV-vis near-infrared (NIR) spectroscopy. Their electrochemical potential was examined in [Fe(CN)]^4-/[Fe(CN)]^3- by cyclic and square wave voltammetry (CV and SWV) and electrochemical impedance spectroscopy (EIS). GCEBi₂S₃ and GCESb₂S₃ exhibit promising electrochemical performance and a higher specific capacitance of about 700-800 F/g in [Fe(CN)]^4-/[Fe(CN)]³. Thin films of Bi₂S₃ and Sb₂S₃ were successfully incorporated in the fabrication of solar cell devices. The fabricated device using Bi₂S₃ (under 100 mW/cm²) showed a power conversion efficiency (PCE) of 0.39%, with a V _oc of 0.96 V, a J _sc of 0.00228 mA/cm², and an FF of 44%. In addition, the device exhibits nonlinear current density-voltage characteristics, indicating that Bi₂S₃ was experiencing a Schottky contact. The Sb₂S₃-based solar cell device showed no connection in the dark and under illumination. Therefore, no efficiency was recorded for the device using Sb₂S₃, which indicated the ohmic nature of the film. This might be due to the current leakage caused by poor coverage. The nanoparticles were found to induce similar responses to the conventional semiconductor nanomaterials in relation to photoelectrochemistry. The present study indicates that Bi₂S₃ and Sb₂S₃ nanoparticles are promising semiconductor materials for developing optoelectronic and electrochemical devices as the films experience Schottky and Ohmic contacts.

Probing the Surface Chemistry of Nanoporous Gold via Electrochemical Characterization and Atom Probe Tomography

Surface chemistry information is crucial in understanding catalytic and sensing mechanisms. However, resolving the outermost monolayer composition of metallic nanoporous materials is challenging due to the high tortuosity of their morphology. In this study, we first elaborate on the capabilities and limitations of atom probe tomography (APT) in resolving interfaces. Subsequently, an electrochemical approach is designed to characterize the surface composition of nanoporous gold (NPG), developed from dealloying an inexpensive precursor (95 at. % Ag, 5 at. % Au), by the means of aqueous electrochemical measurements of the selective electrosorption of sulfide ions, which react strongly with Ag, but to a significantly lesser extent with Au. Accordingly, cyclic voltammetry was performed at various scan rates on NPG in alkaline aqueous solutions (0.2 M NaOH; pH 13) in the presence and absence of 1 mM Na2S. Calibrations via similar voltammetric measurements on pure polycrystalline Ag and Au surfaces allowed for a quantitative estimation for the Ag surface coverage of NPG. The sensitivity threshold for the detection of the adsorbate-Ag interaction was assessed to be approximately 2% Ag surface coverage. As curves measured on NPG only showed featureless capacitive currents, no faradaic charge density associated with sulfide electrosorption could be detected. This study opens a new avenue to gain further insight into the monolayer surface coverage of metallic nanoporous materials and assists in enhancement of the interpretation of APT reconstructions.

Synthesis of zinc sulfide/copper sulfide/porous carbonized cotton nanocomposites for flexible supercapacitor and recyclable photocatalysis with high performance

The composite material composed of zinc sulfide, copper sulfide and porous carbon is prepared in this study, exhibiting excellent performances in the field of supercapacitor electrode and photocatalysts. In the degradation process of organic pollutants, zinc sulfide/copper sulfide with heterostructure effectively reduce the recombination rate of photo-generated electron-hole pairs. And the porous carbon substrate can not only accelerate the separation of photo-carriers but also provide numerous active sites. Furthermore, the sample can be easily separated after decomposing the organic pollutants. As a supercapacitor electrode, the combination of zinc sulfide/copper sulfide with large pseudo-capacitance and porous carbon material with excellent double-layercapacitance results in superior electrochemical performances. The composite electrode shows a high specific capacitance of 1925 mF cm^-2/0.53 mAh cm^-2 at 4 mA cm^-2. And the symmetric flexible supercapacitor based on the composite electrode achieves an outstanding energy density (0.39 Wh cm^-2 at the power density of 4.32 W cm^-2). Therefore, the zinc sulfide/copper sulfide/porous carbonized cotton nanocomposites (pCZCS) prepared herein exhibit dual functions of photocatalysts with high efficiency as well as energy storage materials with high energy density, which is interesting and important for expanding the practical applications in cross fields.

Microwave-Epoxide-Assisted Hydrothermal Synthesis of the CuO/ZnO Heterojunction: a Highly Versatile Route to Develop H2S Gas Sensors

A robust synthesis approach to develop CuO/ZnO nanocomposites using microwave-epoxide-assisted hydrothermal synthesis and their proficiency toward H2S gas-sensing application are reported. The low-cost metal salts (Cu and Zn) as precursors in aqueous media and epoxide (propylene oxide) as a proton scavenger/gelation agent are used for the formation of mixed metal hydroxides. The obtained sol was treated using the microwave hydrothermal process to yield the high-surface area (34.71 m2/g) CuO/ZnO nanocomposite. The developed nanocomposites (1.25-10 mol % Cu doping) showcase hexagonal ZnO and monoclinic CuO structures, with an average crystallite size in the range of 18-29 nm wrt Cu doping in the ZnO matrix. The optimized nanocomposite (2.5 mol % Cu doping) showed a lowest crystallite size of 21.64 nm, which reduced further to 18.06 nm upon graphene oxide addition. Morphological analyses (scanning electron microscopy and transmission electron microscopy) exhibited rounded grains along with copious channels typical for sol-gel-based materials . Elemental mapping displayed the good dispersion of Cu in the ZnO matrix. When these materials are employed as a gas sensor, they demonstrated high sensitivity and selectivity toward H2S gas in comparison with the reducing gases and volatile organic compounds under investigation. The systematic doping of Cu in the ZnO matrix exhibited an improved response from 76.66 to 94.28%, with reduction in operating temperature from 300 to 250 °C. The 2.5 mol % doped Cu in ZnO was found to impart a response of 23 s for 25 ppm of H2S. Gas-sensing properties are described using an interplay of epoxide-assisted sol-gel chemistry and structural and morphological properties of the developed material.

In Situ Construction of CNT/CuS Hybrids and Their Application in Photodegradation for Removing Organic Dyes

Herein, a coprecipitation method used to synthesize CuS nanostructures is reported. By varying the reaction time and temperature, the evolution of the CuS morphology between nanoparticles and nanoflakes was investigated. It was found that CuS easily crystallizes into sphere-/ellipsoid-like nanoparticles within a short reaction time (0.5 h) or at a high reaction temperature (120 °C), whereas CuS nanoflakes are readily formed at a low reaction temperature (20 °C) for a long time (12 h). Photodegradation experiments demonstrate that CuS nanoflakes exhibit a higher photodegradation performance than CuS nanoparticles for removing rhodamine B (RhB) from aqueous solution under simulated sunlight irradiation. Carbon nanotubes (CNTs) were further used to modify the photodegradation performance of a CuS photocatalyst. To achieve this aim, CNTs and CuS were integrated to form CNT/CuS hybrid composites via an in situ coprecipitation method. In the in situ constructed CNT/CuS composites, CuS is preferably formed as nanoparticles, but cannot be crystallized into nanoflakes. Compared to bare CuS, the CNT/CuS composites manifest an obviously enhanced photodegradation of RhB; notably, the 3% CNT/CuS composite with CNT content of 3% showed the highest photodegradation performance (η = 89.4% for 120 min reaction, kapp = 0.01782 min-1). To make a comparison, CuS nanoflakes and CNTs were mechanically mixed in absolute alcohol and then dried to obtain the 3% CNT/CuS-MD composite. It was observed that the 3% CNT/CuS-MD composite exhibited a slightly higher photodegradation performance (η = 92.4%, kapp = 0.0208 min-1) than the 3% CNT/CuS composite, which may be attributed to the fact that CuS maintains the morphology of nanoflakes in the 3% CNT/CuS-MD composite. The underlying enhanced photocatalytic mechanism of the CNT/CuS composites was systematically investigated and discussed.

Hierarchical NiCo2S4@Nickel-Cobalt Layered Double Hydroxide Nanotube Arrays on Metallic Cotton Yarns for Flexible Supercapacitors

Constructing high capacitance active materials and three-dimensional (3D) conductive networks inside textile yarn frames is a promising strategy to synthesize yarn supercapacitor electrodes. In this study, growing NiCo₂S₄@Ni-Co layered double hydroxide (LDH) nanotube arrays on Au-metalized cotton yarns yields a novel yarn supercapacitor electrode material. The resulting yarn electrode possesses numerous merits, including high electrical conductivity from NiCo₂S₄ and Au-metalized cotton yarns, high capacitance of Ni-Co LDH nanosheets, and the 3D hierarchical electrode structure. The unique electrode structure leads to excellent electrochemical properties including high capacitance (5680 mF cm^-2), excellent rate performance, and stable cycling performance. A two-ply symmetric yarn supercapacitor assembled from the NiCo₂S₄/Ni-Co LDH/Au/cotton yarn electrode reaches an areal energy density of 3.5 μW h cm^-2.

A core@shell hollow heterostructure of Co3O4 and Co3S4: an efficient oxygen evolution catalyst

A hollow core@shell nanostructure of Co₃O₄ and Co₃S₄ helps to enhance the electrocatalytic activity for the OER.

Nanotubes of NiCo2 S4 /Co9 S8 Heterostructure: Efficient Hydrogen Evolution Catalyst in Alkaline Medium

The most important issue in water splitting is the development of efficient, abundant, and cost-effective hydrogen and oxygen evolution catalysts. The development of an efficient electrocatalyst for the hydrogen evolution reaction (HER) under alkaline conditions is described here following a simple hydrothermal route. Here, a method for the synthesis of NiCo₂ S₄ /Co₉ S₈ , Co₉ S₈ , and NiCo₂ S₄ nanotubes has been developed. The NiCo₂ S₄ /Co₉ S₈ heterostructure has been introduced as an efficient electrocatalyst towards HER under alkaline conditions (1.0 m KOH). The vertically aligned nanotube heterostructure (NiCo₂ S₄ /Co₉ S₈ ) shows the most efficient activity as compared to bare Co₉ S₈ and NiCo₂ S₄ nanotubes. The heterostructure of NiCo₂ S₄ and Co₉ S₈ shows a significant anodic shift in the onset potential compared to the bare counterpart. NiCo₂ S₄ /Co₉ S₈ can generate a current density of 10 mA cm^-2 upon application of only -0.172 V vs. RHE, whereas Co₉ S₈ and NiCo₂ S₄ require -0.293 V and -0.239 V vs. RHE, respectively. The heterostructure formation and the nanotube morphology of Co₉ S₈ and NiCo₂ S₄ facilitates a fast charge transportation which results in higher electrocatalytic activity. The hydrogen gas evolution rate of the NiCo₂ S₄ /Co₉ S₈ heterostructure was determined to be 2.29 μmol min^-1 .

Generating plasmonic heterostructures by cation exchange and redox reactions of covellite CuS nanocrystals with Au3+ ions

We demonstrate the fabrication of various types of heterostructures, including core-shells and dimers. This is achieved by reacting platelet-shaped covellite (CuS) nanocrystals (NCs) with Au³⁺ ions under various reaction conditions: the exposure of CuS NCs to Au³⁺ ions, in the presence or in the absence of ascorbic acid (AA), leads to the formation of CuS@Au core-shell nanostructures; the reaction of CuS NCs with Au³⁺ ions in the presence of oleylamine (OM) leads to the formation of CuS@Au₂S; the presence of both OM and AA leads to the formation of Au/CuS dimers. Depending on which condition is chosen, either cation exchange (CE) between gold and copper ions is predominant (leading to amorphous Au₂S) or the reduction of Au³⁺ leads to the nucleation of metallic Au domains (which are operated by the AA). In the heterostructures achieved by CE, the Au₂S shell is almost entirely amorphous, and can be converted to polycrystalline upon electron beam irradiation. Finally, when both oleylamine and AA are present in the reaction environment, Au/CuS dimers are formed due to the reduction of Au³⁺ to metallic Au domains which nucleate on top of the CuS seeds. The experimental dual plasmonic bands of the CuS@Au core-shells and Au/CuS dimers are in agreement with the theoretical optical simulations. The procedures described here enable the synthesis of core-shell nanostructures with tunable localized surface plasmon resonances (LSPRs) in the near-infrared (NIR) region, and of plasmonic metal/semiconductor heterostructures with LSPRs in both the NIR and the visible regions.

Engineering the Composition and Structure of Bimetallic Au-Cu Alloy Nanoparticles in Carbon Nanofibers: Self-Supported Electrode Materials for Electrocatalytic Water Splitting

The bimetallic Au-Cu alloy nanoparticles have been constructed in electrospun carbon nanofibers (Au-Cu/CNFs), employing as high efficient hydrogen evolution reaction (HER) electrode. The morphology, structure, and composition of bimetallic Au-Cu alloy can be controlled by adjusting the precursor nanofibers through a facile approach. With the increased Cu content, the Au-Cu alloy have a transition from the homogeneous AuCu₃ alloy phase to the Au₃Cu phase with Cu shell. The self-supported bimetallic Au-Cu/CNFs hybrid can be directly employed as electrode materials for water splitting, and it showed excellent electrochemical activity, including long-term stability, high exchange current density, and low overpotential. The outstanding HER performance could be mainly attributed to the synergistic interactions and interfacial effects of Au-Cu alloy with high densities of uncoordinated surface atoms. In addition, the fast charge transport and the fast kinetic for the desorption of the gas were originated from the self-supported three-dimensional architectures consist of integrated Au-Cu/CNFs networks. The Au-Cu/CNFs with mass ratio of 1:2 (Au₃Cu-Cu "core-shell" alloy) obtain the lowest overpotential of 83 mV (at j = 10 mA cm^-2), lowest Tafel slope of 70 mV dec^-1, and highest exchange current density of 0.790 mA cm^-2. The present investigations offer a new strategy for the design and synthesis of unique nanocrystals in energy conversion related application.

Ag2S/Ag Heterostructure: A Promising Electrocatalyst for the Hydrogen Evolution Reaction

Different metal chalcogenides, being a potential candidate for hydrogen evolution catalysts, have attracted enormous attention in the field of water splitting. In the present study, Ag₂S/Ag is revealed as an efficient catalyst for hydrogen evolution. When a sacrificial template of the CuS nanostructure is used, Ag₂S/Ag heterostructures are synthesized following a simple wet-chemical technique. Two different routes, wet chemical and hydrothermal, are followed to modulate the morphology of the CuS templates from flower ball to wirelike structures, which subsequently results in the formation of Ag₂S nanostructure. Finally, the Ag layer is deposited on Ag₂S with the help of a photoreduction technique. The unique heterostructure of Ag₂S/Ag shows efficient catalytic activity in the H₂ evolution reaction. A Ag₂S/Ag wire can successfully generate a 10 mA/cm² current density at a -0.199 V potential. Ag₂S/Ag contains the micronanostructure where nanoplates of Ag₂S/Ag assemble to give rise to microstructures such as flower balls and wire.

Visible-light-enhanced power generation in microbial fuel cells coupling with 3D nitrogen-doped graphene

A high performance visible-light-assisted MFC was successfully fabricated based on the synergistic effect between a novel 3D NG-SS anode and a visible-light responsive CuS photocathode.