Biofunctionalized 3-D Carbon Nano-Network Platform for Enhanced Fibroblast Cell Adhesion

Impact of nanotechnology at heterogeneous interphases @ Sustainability

The 21st century information and communication industries have played the pivotal role of bio-sensing technologies, refining privacy policies for human performance, facilitating scientific innovation, shaping e-governance, and reinforcing public confidence using nanotechnology. Human body is a thermodynamic heat engine in providing effective mechanical work as a function of psyche, conventional fuel transformation into enriched protein meal, and balancing of work-life fulcrum. The triboelectric effect of rubbing surfaces, interfaces, and interphases is invincible from the large field of the planet to nanodomains.

Influence of the properties of different graphene-based nanomaterials dispersed in polycaprolactone membranes on astrocytic differentiation

Composites of polymer and graphene-based nanomaterials (GBNs) combine easy processing onto porous 3D membrane geometries due to the polymer and cellular differentiation stimuli due to GBNs fillers. Aiming to step forward to the clinical application of polymer/GBNs composites, this study performs a systematic and detailed comparative analysis of the influence of the properties of four different GBNs: (i) graphene oxide obtained from graphite chemically processes (GO); (ii) reduced graphene oxide (rGO); (iii) multilayered graphene produced by mechanical exfoliation method (Gmec); and (iv) low-oxidized graphene via anodic exfoliation (Ganodic); dispersed in polycaprolactone (PCL) porous membranes to induce astrocytic differentiation. PCL/GBN flat membranes were fabricated by phase inversion technique and broadly characterized in morphology and topography, chemical structure, hydrophilicity, protein adsorption, and electrical properties. Cellular assays with rat C6 glioma cells, as model for cell-specific astrocytes, were performed. Remarkably, low GBN loading (0.67 wt%) caused an important difference in the response of the C6 differentiation among PCL/GBN membranes. PCL/rGO and PCL/GO membranes presented the highest biomolecule markers for astrocyte differentiation. Our results pointed to the chemical structural defects in rGO and GO nanomaterials and the protein adsorption mechanisms as the most plausible cause conferring distinctive properties to PCL/GBN membranes for the promotion of astrocytic differentiation. Overall, our systematic comparative study provides generalizable conclusions and new evidences to discern the role of GBNs features for future research on 3D PCL/graphene composite hollow fiber membranes for in vitro neural models.

Bio-Inspired Nanostructured Ti-6Al-4V Alloy: The Role of Two Alkaline Etchants and the Hydrothermal Processing Duration on Antibacterial Activity

Inspired by observations that the natural topography observed on cicada and dragonfly wings may be lethal to bacteria, researchers have sought to reproduce these nanostructures on biomaterials with the goal of reducing implant-associated infections. Titanium and its alloys are widely employed biomaterials with excellent properties but are susceptible to bacterial colonisation. Hydrothermal etching is a simple, cost-effective procedure which fabricates nanoscale protrusions of various dimensions upon titanium, depending on the etching parameters used. We investigated the role of etching time and the choice of cation (sodium and potassium) in the alkaline heat treatment on the topographical, physical, and bactericidal properties of the resulting modified titanium surfaces. Optimal etching times were 4 h for sodium hydroxide (NaOH) and 5 h for potassium hydroxide (KOH). NaOH etching for 4 h produced dense, but somewhat ordered, surface nanofeatures with 75 nanospikes per µm². In comparison, KOH etching for 5 h resulted sparser but nonetheless disordered surface morphology with only 8 spikes per µm². The NaOH surface was more effective at eliminating Gram-negative pathogens, while the KOH surface was more effective against the Gram-positive strains. These findings may guide further research and development of bactericidal titanium surfaces which are optimised for the predominant pathogens associated with the intended application.

Biocompatibility studies of polyurethane electrospun membranes based on arginine as chain extender

Electrospun polymers are an example of multi-functional biomaterials that improve the material-cellular interaction and aimed at enhancing wound healing. The main objective of this work is to fabricate electrospun polyurethane membranes using arginine as chain extender (PUUR) in order to test the fibroblasts affinity and adhesion on the material and the polymer toxicity. Polyurethane membranes were prepared in two steps: (i) the polyurethane synthesis, and ii) the electrospinning process. The membranes were characterized by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy, gel permeation chromatography, and differential scanning calorimetry techniques. The evaluation of PUUR as a scaffolding biomaterial for growing and developing of cells on the material was realized by LIVE/DEAD staining. The results show that the fluorescent surface area of human fibroblasts (hFB), was greater in control dense membranes made from Tecoflex than in electrospun and dense PUUR. From SEM analysis, the electrospun membranes show relatively uniform attachment of cells with a well-spread shape, while Tecoflex dense membranes show a non-proliferating round shape, which is attributed to the fiber's structure in electrospun membranes. The cell morphology and the cell attachment assay results reveal the well spreading of hFB cells on the surface of electrospun PUUR membranes which indicates a good response related to cell adhesion.

Hierarchically Porous Carbon Materials from Self-Assembled Block Copolymer/Dopamine Mixtures

Hierarchically porous carbon materials with interconnected frameworks of macro- and mesopores are desirable for electrochemical applications in biosensors, electrocatalysis, and supercapacitors. In this study, we report a facile synthetic route to fabricate hierarchically porous carbon materials by controlled macro- and mesophase separation of a mixture of polystyrene-block-poly(ethylene) and dopamine. The morphology of mesopores is tailored by controlling the coassembly of PS-b-PEO and dopamine in the acidic tetrahydrofuran-water cosolvent. HCl addition plays a critical role via enhancing the charge-dipole interactions between PEO and dopamine and suppressing the clustering and chemical reactions of dopamine in solution. As a result, subsequent drying can produce interpenetrated PS-b-PEO/DA mixtures without forming dopamine microsized crystallites. Dopamine oxidative polymerization induced by solvent annealing in NH₄OH vapor enables the formation of percolating macropores. Subsequent pyrolysis to selectively remove the PS-b-PEO template from the complex can produce hierarchically porous carbon materials with interconnected frameworks of macro- and mesopores when pyrolysis is implemented at a low temperature or when DA is a minor component.

The Influence of Surface Wettability and Topography on the Bioactivity of TiO2/Epoxy Coatings on AISI 316L Stainless Steel

Epoxy/TiO₂/epoxy and epoxy/FAS-TiO₂/epoxy coatings were applied to the surface of AISI 316L stainless steel with the aim to improve the biocompatibility and antibacterial properties. Contact-angle measurements were used to evaluate the wetting properties of the epoxy, epoxy/TiO₂/epoxy and epoxy/FAS-TiO₂/epoxy coatings. The epoxy and epoxy/TiO₂/epoxy coatings were hydrophilic compared with the strongly hydrophobic epoxy/FAS-TiO₂/epoxy coating. The average surface roughness (S_a) of the epoxy/FAS-TiO₂/epoxy coating was higher than that of the epoxy/TiO₂/epoxy coating due to the formation of agglomerates. The biocompatibility evaluation revealed that the cell attachment was significantly higher on the epoxy/FAS-TiO₂/epoxy and epoxy/TiO₂/epoxy coatings compared with the pure epoxy coating. We also observed improved antibacterial properties for the epoxy coatings with the addition of both TiO₂ and FAS-TiO₂ nanoparticles.

Visible-Light-Induced Photocatalytic and Antibacterial Activity of TiO2 Codoped with Nitrogen and Bismuth: New Perspectives to Control Implant-Biofilm-Related Diseases

Biofilm-associated diseases are one of the main causes of implant failure. Currently, the development of implant surface treatment goes beyond the osseointegration process and focuses on the creation of surfaces with antimicrobial action and with the possibility to be re-activated (i.e., light source activation). Titanium dioxide (TiO₂), an excellent photocatalyst used for photocatalytic antibacterial applications, could be a great alternative, but its efficiency is limited to the ultraviolet (UV) range of the electromagnetic spectrum. Since UV radiation has carcinogenic potential, we created a functional TiO₂ coating codoped with nitrogen and bismuth via the plasma electrolytic oxidation (PEO) of titanium to achieve an antibacterial effect under visible light with re-activation potential. A complex surface topography was demonstrated by scanning electron microscopy and three-dimensional confocal laser scanning microscopy. Additionally, PEO-treated surfaces showed greater hydrophilicity and albumin adsorption compared to control, untreated titanium. Bismuth incorporation shifted the band gap of TiO₂ to the visible region and facilitated higher degradation of methyl orange (MO) in the dark, with a greater reduction in the concentration of MO after visible-light irradiation even after 72 h of aging. These results were consistent with the in vitro antibacterial effect, where samples with nitrogen and bismuth in their composition showed the greatest bacterial reduction after 24 h of dual-species biofilm formation ( Streptococcus sanguinis and Actinomyces naeslundii) in darkness with a superior effect at 30 min of visible-light irradiation. In addition, such a coating presents reusable photocatalytic potential and good biocompatibility by presenting a noncytotoxicity effect on human gingival fibroblast cells. Therefore, nitrogen and bismuth incorporation into TiO₂ via PEO can be considered a promising alternative for dental implant application with antibacterial properties in darkness, with a stronger effect after visible-light application.

SERS-Active 3D Interconnected Nanocarbon Web toward Nonplasmonic in Vitro Sensing of HeLa Cells and Fibroblasts

A noninvasive intracellular component analysis technique is important in cancer treatment and the initial identification of cancer. Carbon nanomaterials/nanostructures, such as carbon nanotubes and graphene, have little to no surface enhanced Raman scattering (SERS) ability. Because of these structures' low Raman responses, they are conjugated with gold or silver to attain the SERS-active ability to detect normal fibroblasts and HeLa cancer cells. To the best of our knowledge, the effectiveness of the individual use of carbon nanomaterials as a nonplasmonic SERS-active platform for in vitro cancer/normal cell detection has not been investigated to date. Here, for the first time, we introduce a unique nonplasmonic SERS-based biosensing platform that uses a biocompatible self-assembled three-dimensional interconnected nanocarbon web (INW) for in vitro detection and differentiation of HeLa cells and fibroblasts. The sub-10-nm morphology of the INW facilitates the endocytic uptake of INW clusters to the cells, and its SERS functionality introduces live cell Raman sensing. The INW platform has achieved an enhancement factor (EF) of 3.66 × 10⁴ and 9.10 × 10³ with crystal violet and Rhodamine 6G dyes, respectively, significant in comparison to the EF of graphene surfaces (2-17). The results of the time-based Raman spectroscopy of live HeLa cells and fibroblasts revealed chemical fingerprints of intracellular components, such as DNA/RNA, proteins, and lipids. The components' spectroscopic differences facilitate and elucidate the specification of each cell. The highest Raman enhancement achieved was fourfold for fibroblasts (protein) and sixfold for HeLa cells (DNA). Furthermore, the SERS spectra along with scanning electron microscopy and fluorescence microscopy analysis of the immobilized cells after 24 and 48 h shed light on the health of fibroblasts and HeLa cells. A photon energy-induced ionization achieved with a femtosecond laser fabricated a biocompatible INW platform with the designated unique attributes. This simple, label-free, in vitro diagnosis approach for HeLa cells and fibroblasts has strong potential for cancer research.

Fabrication and characterization of a novel self-assembling micelle based on chitosan cross-linked pectin–doxorubicin conjugates macromolecular pro-drug for targeted cancer therapy

Cancer is one of the leading causes of morbidity and mortality worldwide.