Dual-band and spectrally selective infrared absorbers based on hybrid gold-graphene metasurfaces

In this paper, we propose a dual-band and spectrally selective infrared (IR) absorber based on a hybrid structure comprising a patterned graphene monolayer and cross-shaped gold resonators within a metasurface. Rooted in full-wave numerical simulations, our study shows that the fundamental absorption mode of the gold metasurface hybridizes with the graphene pattern, leading to a second absorptive mode whose properties depend on graphene's electrical properties and physical geometry. Specifically, the central operation band of the absorber is defined by the gold resonators whereas the relative absorption level and spectral separation between the two modes can be controlled by graphene's chemical potential and its pattern, respectively. We analyze this platform using coupled-mode theory to understand the coupling mechanism between these modes and to elucidate the emergence and tuning of the dual band response. The proposed dual-band device can operate at different bands across the IR spectrum and may open new possibilities for tailored sensing applications in spectroscopy, thermal imaging, and environmental monitoring.

Online Testing Method for the Fine Spectral Characteristics of Narrow-Band Interference Filters Based on a Narrow-Linewidth Tunable Laser

The transmission spectrum of a narrow-band interference filter is crucial and highly influenced by factors such as the temperature and angle, thus requiring precise and online measurements. The traditional method of measuring the transmission spectrum of an interference filter involves the use of a spectrometer, but the accuracy of this method is limited. Moreover, placing a narrow-band interference filter inside a spectrometer hinders real-time online measurements. To address this issue, there is demand for high-precision online spectral testing methods. In response to this demand, we propose and experimentally validate a fine spectral characterization method for narrow-band interference filters. This method uses a narrow-linewidth tunable laser, achieving a spectral resolution in the MHz range for online testing. Two types of narrow-band interference filters were tested using the constructed laser spectroscopy experimental system, obtaining a transmission spectrum with a spectral resolution of 318 MHz. In comparison to spectrometer-based methods, our proposed method demonstrates higher spectral accuracy, enables online measurements, and provides more accurate measurements for special spectral interference filters. This approach has significant application value and promising development prospects.

Thin-film wafer-scale mid-IR Fabry Perot cavity gas sensor

We demonstrate a miniaturized wafer-scale optical gas sensor that combines the gas cell, an optical filter, and integrated flow channels. We present the design, fabrication and characterization of an integrated cavity-enhanced sensor. Using the module, we demonstrate absorption sensing of ethylene down to 100 ppm level.

Multi-laser sensor for simultaneous multi-gas measurements using off-axis cavity-enhanced absorption spectroscopy with an opposite two-way configuration

An opposite two-way off-axis cavity-enhanced absorption spectroscopy-based multi-gas sensor is reported. More than two lasers can be employed in the sensor for simultaneous detection of different gas species. An approximately two times improvement in magnitude of the 2f signal and the signal-to-noise ratio is achieved because the concave spherical mirrors outside each end of the cavity and the narrow bandpass filters before the detectors can act as re-injection mirrors to re-inject the light into the cavity in the scheme. The performance of the sensor is demonstrated by simultaneous measurement of CO₂ and CH₄ in the atmosphere. This Letter highlights a new, to the best of our knowledge, strategy for simultaneous multi-gas measurement in a single integrated cavity by employing as many as four lasers.

Simultaneous and interference-free measurements of temperature and C2H4 concentration using a single tunable diode laser at 1.62 µm

In the tunable diode laser absorption spectroscopy-based diagnostics, the absorption of the measured target species may be influenced by the interference absorption from other vapor-phase species and the extinction from particles and liquid droplets, especially at high temperatures and pressures. Here, we report the first application (to our knowledge) of a differential absorption diagnostic for interference-free, simultaneous measurement of temperature and ethylene concentration using a single distributed-feedback diode laser near 1.62 μm. According to the detailed study of the C₂H₄ spectra in this region, two wavelength pairs are chosen to measure the temperature based on six selection criteria. C₂H₄ concentration is measured by one of the selected wavelength pairs with higher differential absorption. To validate the developed system, experiments are performed in a well-controlled heated static cell at a range of temperatures (300-900 K) and pressures (1-6 atm). The measurement accuracies for temperature and ethylene concentration are 1.83% and 1.65%, respectively, over the considered ranges. The precision, stability, and detection limit are also analyzed to validate the system's performance. This system can potentially be applied in a variety of combustion applications.

Advances in High-Power, Ultrashort Pulse DPSSL Technologies at HiLASE

The development of kW-class diode-pumped picosecond laser sources emitting at various wavelengths started at the HiLASE Center four years ago. A 500-W Perla C thin-disk laser with a diffraction limited beam and repetition rate of 50–100 kHz, a frequency conversion to mid-infrared (mid-IR), and second to fifth harmonic frequencies was demonstrated. We present an updated review on the progress in the development of compact picosecond and femtosecond high average power radiation sources covering the ultraviolet (UV) to mid-IR spectral range at the HiLASE Center. We also report on thin-disk manufacturing by atomic diffusion bonding, which is a crucial technology for future high-power laser development.

Quantifying nanoscale biochemical heterogeneity in human epithelial cancer cells using combined AFM and PTIR absorption nanoimaging

Subcellular chemical heterogeneity plays a key role in cell organization and function. However the biomechanics underlying the structure-function relationship is governed by cell substructures which are poorly resolved using conventional chemical imaging methods. To date, advances in sub-diffraction limited infrared (IR) nanoscopy have permitted intracellular chemical mapping. In this work we report how image analysis applied to a combination of IR absorption nanoimaging and topographic data permits quantification of chemical complexity at the nanoscale, enabling the analysis of biochemical heterogeneity in mammalian cancer cells on the scale of subcellular features.

DFG-based mid-IR generation using a compact dual-wavelength all-fiber amplifier for laser spectroscopy applications

We demonstrate a compact mid-infrared (mid-IR) radiation source based on difference frequency generation (DFG) in periodically poled lithium niobate (PPLN) crystal. The system incorporates a dual-wavelength master oscillator power amplifier (MOPA) source capable of simultaneous amplification of 1064 nm and 1548 nm signals in a common active fiber co-doped with erbium and ytterbium ions. Two low-power seed lasers were amplified by a factor of 14.4 dB and 23.7 dB for 1064 nm and 1548 nm, respectively and used in a nonlinear DFG setup to generate 1.14 mW of radiation centered at 3.4 μm. The system allowed for open-path detection of methane (CH(4)) in ambient air with estimated minimum detectable concentration at a level of 26 ppbv.

TRIPLE Q: a three channel quantum cascade laser absorption spectrometer for fast multiple species concentration measurements

A compact and transportable three channel quantum cascade laser system (TRIPLE Q) based on mid-infrared absorption spectroscopy has been developed for time-resolved plasma diagnostics. The TRIPLE Q spectrometer encompasses three independently controlled quantum cascade lasers (QCLs), which can be used for chemical sensing, particularly for gas phase analysis of plasmas. All three QCLs are operated in the intra-pulse mode with typical pulse lengths of the order of 150 ns. Using a multiplexed detection, a time resolution shorter than 1 μs can be achieved. Hence, the spectrometer is well suited to study kinetic processes of multiple infrared active compounds in reactive plasmas. A special data processing and analysis technique has been established to account for time jitter effects of the infrared emission of the QCLs. The performance of the TRIPLE Q system has been validated in pulsed direct current plasmas containing N(2)O/air and NO(2)/air.

Second harmonic generation in AlGaAs photonic wires using low power continuous wave light

We report modal phase matched (MPM) second harmonic generation (SHG) in high-index contrast AlGaAs sub-micron ridge waveguides, by way of sub-mW continuous wave powers at telecommunication wavelengths. We achieve an experimental normalized conversion efficiency of ~14%/W/cm2, obtained through a careful sub-wavelength design supporting both the phase matching requirement and a significant overlap efficiency. Furthermore, the weak anomalous dispersion, robust fabrication technology and possible geometrical and thermal tuning of the device functionality enable a fully integrated multi-functional chip for several critical areas in telecommunications, including wavelength (time) division multiplexing and quantum entanglement.

The ways to the trace level analysis in infrared spectroscopy

The future of infrared (IR) spectroscopy as an analytical technique is assured due to its versatility and its numerous advantages; such as the possibility to obtain molecular specific information for virtually any sample in any state with no treatment or minimal sample preparation. However, spectroscopists are not satisfied with relegating IR spectroscopy just to major and minor component analysis and have been looking at analysis at the trace level too. This review is the recognition of the brilliant research performed during the past two decades and the advances achieved in this area, which have made possible the analysis of contaminants at parts per billion (ppb) levels by IR in different matrices; such as water and soils.

Quantum cascade laser absorption spectroscopy as a plasma diagnostic tool: an overview

The recent availability of thermoelectrically cooled pulsed and continuous wave quantum and inter-band cascade lasers in the mid-infrared spectral region has led to significant improvements and new developments in chemical sensing techniques using in-situ laser absorption spectroscopy for plasma diagnostic purposes. The aim of this article is therefore two-fold: (i) to summarize the challenges which arise in the application of quantum cascade lasers in such environments, and, (ii) to provide an overview of recent spectroscopic results (encompassing cavity enhanced methods) obtained in different kinds of plasma used in both research and industry.

High-temperature multipass cell for infrared spectroscopy of heated gases and vapors

In absorption spectroscopy, infrared spectra of heated gases or condensed samples in the vapor phase are usually recorded with a single pass heated gas cell. This device exhibits two orders of magnitude lower sensitivity than the high-temperature multipass cell presented in this article. Our device is a novel type of compact long path absorption cell that can withstand aggressive chemicals in addition to temperatures up to 723 K. The construction of the cell and its technical features are described in detail, paying special attention to the mechanisms that compensate for thermal expansion and that allow the user to vary the optical path length under any thermal or vacuum condition. The cell may be used with a laser source or implemented within a Fourier transform infrared spectrometer. Its design is compatible with optical arrangements using astigmatic mirrors or spherical mirrors in a Herriott configuration. Here we implement a homebuilt Herriott-type cell with a total optical path length of up to 35 m. In order to demonstrate the feasibility of the cell, methane and water vapor absorption lines showing dissimilar temperature effects on line intensity were recorded with the help of a mid-infrared laser source tunable between 3 and 4 microm. Emphasis is put on lines that are too weak to be recorded with a single pass cell.

Ammonia detection by using quantum-cascade laser photoacoustic spectroscopy

A pulsed quantum-cascade distributed-feedback laser, temperature tunable from -41 degrees C to +31.6 degrees C, and a resonant differential photoacoustic detector are used to measure trace-gas concentrations to as low as 66 parts per 10(9) by volume (ppbv) ammonia at a low laser power of 2 mW. Good agreement between the experimental spectrum and the simulated HITRAN spectrum of NH3 is found in the spectral range between 1046 and 1052 cm(-1). A detection limit of 30 ppbv ammonia at a signal-to-noise ratio of 1 was obtained with the quantum-cascade laser (QCL) photoacoustic (PA) setup. Concentration changes of approximately 50 ppbv were detectable with this compact and versatile QCL-based PA detection system. The performance of the PA detector, characterized by the product of the incident laser power and the minimum detectable absorption coefficient, was 4.7 x 10-9 W cm(-1).

In situ and on-line monitoring of CO in an industrial glass furnace by mid-infrared difference-frequency generation laser spectroscopy

A compact mid-infrared (MIR) laser spectrometer based on difference-frequency generation (DFG) is applied as a portable and sensitive gas sensor for industrial process control and pollutant monitoring. We demonstrate the performance of such a MIR DFG gas sensor by recording the absorption spectra of the carbon monoxide (CO) P(28) absorption line in the atmosphere of a gas-fired glass melting furnace. For a gas temperature of approximately 1100 degrees C, the CO concentration in the recuperator channel is measured to be 400 parts per million.

DFB laser diodes in the wavelength range from 760 nm to 2.5 microm

We present a novel device technology to produce DFB laser diodes which are suitable for tunable diode laser spectroscopy. The new technological approach employs lateral metal distributed feedback (DFB) gratings in close proximity to the laser ridge which results in single mode emission with high spectral purity and output powers as required for most spectroscopic applications. Over the entire wavelength range from the visible (760 nm) up to the near-infrared (2.5 microm) single mode emission can be obtained for devices based on different semiconductor systems such as GaAs, InP and GaSb. Typical side mode suppression ratios are better than 35 dB for cw-room temperature operation and narrow linewidths ensure high spectroscopic resolution.

Signal processing and calibration procedures for in situ diode-laser absorption spectroscopy

Gas analyzers based on tunable diode-laser spectroscopy (TDLS) provide high sensitivity, fast response and highly specific in situ measurements of several atmospheric trace gases simultaneously. Under optimum conditions even a shot noise limited performance can be obtained. For field applications outside the laboratory practical limitations are important. At ambient mixing ratios below a few parts-per-billion spectrometers become more and more sensitive towards noise, interference, drift effects and background changes associated with low level signals. It is the purpose of this review to address some of the problems which are encountered at these low levels and to describe a signal processing strategy for trace gas monitoring and a concept for in situ system calibration applicable for tunable diode-laser spectroscopy. To meet the requirement of quality assurance for field measurements and monitoring applications, procedures to check the linearity according to International Standard Organization regulations are described and some measurements of calibration functions are presented and discussed.

Broadband, continuous, and fine-tune properties of external-cavity thermoelectric-stabilized mid-infrared quantum-cascade lasers

Continuous, broad, and single-mode wavelength tuning of thermoelectrically cooled short-pulse quantum-cascade lasers is demonstrated with a combination of coarse grating tuning and fine phase tuning of the gain element. This approach overcomes the problem of a poor facet antireflection coating of the gain chip by shifting a Fabry-Perot longitudinal mode to coincide with the desired grating-selected wavelength. The 9-microm laser was tested with NH3 gas absorption and showed fine frequency tuning at a rate of 31 MHz/step and a time-averaged linewidth of 500-750 MHz. The total tuning range was 9.08-9.36 microm and was limited only by the intrinsic gain of the device.