Molecular imprinted polymer coated QCM for the detection of nandrolone

Preparation of a Molecularly Imprinted Film on Quartz Crystal Microbalance Chip for Determination of Furanic Compounds

The structural preferences of furanic compounds were studied using a combination of a molecularly imprinted film (MIF) on a piezoelectric-quartz chip. The furanic compounds and their derivatives were used as the templates. Owing to their similar heterocyclic structures, it is difficult to verify the structural differences between the templates. Therefore, a new cross-linker (Methacr-l-Cys-NHBn)2, was employed to generate a platform on a quartz crystal microbalance (QCM) chip. The cross-linker self-assembled to link the surface of the chip to copolymerize with other functional monomers. A layered film with chiral hydrophobicity and rigidity was thus fabricated. Subsequently, Acr-l-Ser-NHBn was utilized as a chiral monomer to construct MIF on a QCM chip. Forcomparison, we synthesized a more hydrophobic monomer, Methacr-l-Ser-NHBn, to enhance the binding ability of the MIF. The QCM flow injection system was handled in an organic solvent system. The proportion of the monomers was adjusted to optimize the recognition ability of these films. As the binding ability of the MIF toward model templates and structurally-related furanic compounds was improved, a MIF derived from 2-furaldehyde (FUL) achieved a lower detection limit (10 ng/mL). The binding properties of MIFs prepared against furanic compounds exhibited strong similarities to the binding properties of other compounds with heterocyclic ring structures. For example, 2-furaldehyde is very similar to 2-formylthiazole, 2-acetylfuran is similar to 2-acetylthiazole, and 2-furfuryl alcohol is similar to imidazole-2-methanol. Such recognition ability can help distinguish between the structural counterparts of other small heterocyclic compounds.

Molecularly Imprinted Polymers for Chemical Sensing: A Tutorial Review

The field of molecularly imprinted polymer (MIP)-based chemosensors has been experiencing constant growth for several decades. Since the beginning, their continuous development has been driven by the need for simple devices with optimum selectivity for the detection of various compounds in fields such as medical diagnosis, environmental and industrial monitoring, food and toxicological analysis, and, more recently, the detection of traces of explosives or their precursors. This review presents an overview of the main research efforts made so far for the development of MIP-based chemosensors, critically discusses the pros and cons, and gives perspectives for further developments in this field.

Application of comprehensive 2D chromatography in the anti-doping field: Sample identification and quantification

Anti-doping analysis requires an exceptional level of accuracy and precision given the stakes that are at play. Current methods rely on the application of chromatographic techniques linked with mass spectrometry to provide this. However, despite the effectiveness of these techniques in achieving good selectivity and specificity, some issues still exist. In order to reach the minimum required performance level as set by WADA, labs commonly use selective monitoring by quadrupole mass spectrometry. This can be potentially fooled through the use of masking agents or by moving the peaks, as often only a small portion of the spectrum is used for analysis. Further issues exist in the inability to detect new or modified compounds, or to reanalyse samples/spectra. One technique that could overcome these problems is that of comprehensive 2D chromatography. Here a second separation column is employed to generate greater separative power. Compared to conventional separation, GCxGC allows for a greater peak capacity (i.e., number of peaks that can be resolved within a given time) and greater separation of coeluting compounds, which makes the technique promising for the complex task required in anti-doping. When combined with Time of Flight Mass Spectrometry this technique demonstrates vast potential allowing for full mass range datasets to be obtained for retroactive analysis. Similarly, LCxLC provides improvements in resolving power compared to its 1D counterpart and can be used both online as part of the analysis or offline solely as a purification step. In this review we summarise the work in this field so far, how comprehensive chromatography has been applied to anti-doping studies, and discuss the future application for this technique.

Extended gate-type organic transistor functionalized by molecularly imprinted polymer for taurine detection

Molecularly imprinted polymers (MIPs) are a fascinating technology for the sensitive and selective detection of target molecules. However, in most situations, the need for complicated and expensive analytical devices for reading the responses of MIPs greatly limits their applications. For exploring low-cost and easy-to-use applications of MIPs, herein we have developed a MIP-modified extended-gate type organic field-effect transistor (MIP-OFET). Taurine was selected as a demonstrative analyte due to its biological roles and utility as a nutrient. We explored the rational design of the novel MIP with the aid of density functional theory and wave function calculations and characterized the electrochemically synthesized MIP using differential pulse voltammetry and electrochemical impedance spectroscopy. The mechanism of taurine detection by the MIP-OFET can be explained by the changes in the surface potential of the MIP-functionalized extended-gate electrode accompanied with the capture of taurine. The detection limit of taurine in complete aqueous media was estimated to be 0.33 μM, which was lower or comparable to those calculated by high-performance liquid chromatography. Furthermore, taurine in a commercial drink without any extraction was also successfully detected using the fabricated MIP-OFET. This study would broaden the scope of the applications of MIP-OFETS as chemical sensors for on-site detection of various daily nutrients.

A paper-based device for the colorimetric determination of ammonia and carbon dioxide using thiomalic acid and maltol functionalized silver nanoparticles: application to the enzymatic determination of urea in saliva and blood

A colorimetric assay was developed which has the capability of determining urea in biological samples. It is an origami paper-based sensor consisting of silver nanoparticles that were synthesized by using two different capping agents: thiomalic acid and maltol. The function of the assay relied on hydrolysis of urea to ammonia and carbon dioxide in the presence of urease. The products interacted with nanoparticles which caused aggregation. Interestingly, thiomalic acid capped with silver nanoparticles were selective to ammonia, and the other nanoparticles synthesized by maltol responded to carbon dioxide. These interactions turned the color of nanoparticles from yellow to brown and red, respectively. The resulting colorations were captured by a floatable scanner. A routine image analysis software was utilized to provide the response of the assays. The method was applied to individually determine ammonia, carbon dioxide, and urea. The linear range was 0.06 mg.dL^-1-170.0 mg.dL^-1 for ammonia, 0.08 mg.dL^-1-220.0 mg.dL^-1 for carbon dioxide, and 0.5 mg.dL^-1-200.0 mg.dL^-1 for urea. The respective limits of detection were 0.03 mg.dL^-1, 0.06 mg.dL^-1, and 0.18 mg.dL^-1. No interferences were found in the detremination of urea. The method demonstrates a reliable performance for determination of urea in both saliva and blood samples. Graphical Abstract Schematic representation of paper based colorimetric sensor based on silver nanoparticles for both qualitative and quantitative analyses of urea in biological samples.

Application of molecularly imprinted polymers in the anti-doping field: sample purification and compound analysis

The problem posed by anti-doping requirements is one of the great analytical challenges; multiple compound detection at low ng ml-1 levels from complex samples, with requirements for exceptional confidence in results. This review surveys the design, synthesis and application of molecularly imprinted polymers (MIPs) in this field, focusing on the templating of androgenous anabolic steroids (AASs), as the most commonly abused substances, but also other WADA prohibited substances. Commentary on the application of these materials in detection, clean-up and sensing is offered, alongside views on the future of imprinting in this field.

An Overview of High Frequency Acoustic Sensors-QCMs, SAWs and FBARs-Chemical and Biochemical Applications

Acoustic devices have found wide applications in chemical and biosensing fields owing to their high sensitivity, ruggedness, miniaturized design and integration ability with on-field electronic systems. One of the potential advantages of using these devices are their label-free detection mechanism since mass is the fundamental property of any target analyte which is monitored by these devices. Herein, we provide a concise overview of high frequency acoustic transducers such as quartz crystal microbalance (QCM), surface acoustic wave (SAW) and film bulk acoustic resonators (FBARs) to compare their working principles, resonance frequencies, selection of piezoelectric materials for their fabrication, temperature-frequency dependency and operation in the liquid phase. The selected sensor applications of these high frequency acoustic transducers are discussed primarily focusing on the two main sensing domains, i.e., biosensing for working in liquids and gas/vapor phase sensing. Furthermore, the sensor performance of high frequency acoustic transducers in selected cases is compared with well-established analytical tools such as liquid chromatography mass spectrometry (LC-MS), gas chromatographic (GC) analysis and enzyme-linked immunosorbent assay (ELISA) methods. Finally, a general comparison of these acoustic devices is conducted to discuss their strengths, limitations, and commercial adaptability thus, to select the most suitable transducer for a particular chemical/biochemical sensing domain.

Improvement of biosensor accuracy using an interference index detection system to minimize the interference effects caused by icterus and hemolysis in blood samples

An IID system was developed to improve the measurement accuracy of biosensors used in clinical applications by removing the optical characteristics of interference caused by icterus and hemolysis in blood samples.

Label-Free Bioanalyte Detection from Nanometer to Micrometer Dimensions-Molecular Imprinting and QCMs †

Modern diagnostic tools and immunoassay protocols urges direct analyte recognition based on its intrinsic behavior without using any labeling indicator. This not only improves the detection reliability, but also reduces sample preparation time and complexity involved during labeling step. Label-free biosensor devices are capable of monitoring analyte physiochemical properties such as binding sensitivity and selectivity, affinity constants and other dynamics of molecular recognition. The interface of a typical biosensor could range from natural antibodies to synthetic receptors for example molecular imprinted polymers (MIPs). The foremost advantages of using MIPs are their high binding selectivity comparable to natural antibodies, straightforward synthesis in short time, high thermal/chemical stability and compatibility with different transducers. Quartz crystal microbalance (QCM) resonators are leading acoustic devices that are extensively used for mass-sensitive measurements. Highlight features of QCM devices include low cost fabrication, room temperature operation, and most importantly ability to monitor extremely low mass shifts, thus potentially a universal transducer. The combination of MIPs with quartz QCM has turned out as a prominent sensing system for label-free recognition of diverse bioanalytes. In this article, we shall encompass the potential applications of MIP-QCM sensors exclusively label-free recognition of bacteria and virus species as representative micro and nanosized bioanalytes.

Molecular Imprinting Applications in Forensic Science

Producing molecular imprinting-based materials has received increasing attention due to recognition selectivity, stability, cast effectiveness, and ease of production in various forms for a wide range of applications. The molecular imprinting technique has a variety of applications in the areas of the food industry, environmental monitoring, and medicine for diverse purposes like sample pretreatment, sensing, and separation/purification. A versatile usage, stability and recognition capabilities also make them perfect candidates for use in forensic sciences. Forensic science is a demanding area and there is a growing interest in molecularly imprinted polymers (MIPs) in this field. In this review, recent molecular imprinting applications in the related areas of forensic sciences are discussed while considering the literature of last two decades. Not only direct forensic applications but also studies of possible forensic value were taken into account like illicit drugs, banned sport drugs, effective toxins and chemical warfare agents in a review of over 100 articles. The literature was classified according to targets, material shapes, production strategies, detection method, and instrumentation. We aimed to summarize the current applications of MIPs in forensic science and put forth a projection of their potential uses as promising alternatives for benchmark competitors.

Micro- and nano-structure based oligonucleotide sensors

This paper presents a review of micro- and nano-structure based oligonucleotide detection and quantification techniques. The characteristics of such devices make them very attractive for Point-of-Care or On-Site-Testing biosensing applications. Their small scale means that they can be robust and portable, their compatibility with modern CMOS electronics means that they can easily be incorporated into hand-held devices and their suitability for mass production means that, out of the different approaches to oligonucleotide detection, they are the most suitable for commercialisation. This review discusses the advantages of micro- and nano-structure based sensors and covers the various oligonucleotide detection techniques that have been developed to date. These include: Bulk Acoustic Wave and Surface Acoustic Wave devices, micro- and nano-cantilever sensors, gene Field Effect Transistors, and nanowire and nanopore based sensors. Oligonucleotide immobilisation techniques are also discussed.

Molecularly imprinted polymers: present and future prospective

Molecular Imprinting Technology (MIT) is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. Molecularly Imprinted Polymers (MIPs), the polymeric matrices obtained using the imprinting technology, are robust molecular recognition elements able to mimic natural recognition entities, such as antibodies and biological receptors, useful to separate and analyze complicated samples such as biological fluids and environmental samples. The scope of this review is to provide a general overview on MIPs field discussing first general aspects in MIP preparation and then dealing with various application aspects. This review aims to outline the molecularly imprinted process and present a summary of principal application fields of molecularly imprinted polymers, focusing on chemical sensing, separation science, drug delivery and catalysis. Some significant aspects about preparation and application of the molecular imprinting polymers with examples taken from the recent literature will be discussed. Theoretical and experimental parameters for MIPs design in terms of the interaction between template and polymer functionalities will be considered and synthesis methods for the improvement of MIP recognition properties will also be presented.

A survey of the 2001 to 2005 quartz crystal microbalance biosensor literature: applications of acoustic physics to the analysis of biomolecular interactions

The widespread exploitation of biosensors in the analysis of molecular recognition has its origins in the mid-1990s following the release of commercial systems based on surface plasmon resonance (SPR). More recently, platforms based on piezoelectric acoustic sensors (principally 'bulk acoustic wave' (BAW), 'thickness shear mode' (TSM) sensors or 'quartz crystal microbalances' (QCM)), have been released that are driving the publication of a large number of papers analysing binding specificities, affinities, kinetics and conformational changes associated with a molecular recognition event. This article highlights salient theoretical and practical aspects of the technologies that underpin acoustic analysis, then reviews exemplary papers in key application areas involving small molecular weight ligands, carbohydrates, proteins, nucleic acids, viruses, bacteria, cells and lipidic and polymeric interfaces. Key differentiators between optical and acoustic sensing modalities are also reviewed.

Non-optical screening platforms: the next wave in label-free screening?

The use of optical biosensors for compound screening was first demonstrated in the mid-1990s, but there has been limited uptake in the market owing to issues of limited throughput and a lack of applications for key receptor classes. Recently, several start-up and established tools companies have exploited non-optical detection modalities that seek to address the shortcomings of more established optical approaches. Platforms based on acoustic resonance, electrical impedance, microcantilevers, nanowires and differential calorimetry are beginning to appear with commercially available products targeted at post-high-throughput screening hit confirmation and mode-of-action studies. This article highlights key advances in commercial label-free analysis platforms, which complement more traditional optical system and which also allow novel assay formats for the analysis of previously intractable targets.

Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003

Over 1450 references to original papers, reviews and monographs have herein been collected to document the development of molecular imprinting science and technology from the serendipitous discovery of Polyakov in 1931 to recent attempts to implement and understand the principles underlying the technique and its use in a range of application areas. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by papers dealing with fundamental aspects of molecular imprinting and the development of novel polymer formats. Thereafter, literature describing attempts to apply these polymeric materials to a range of application areas is presented.

Direct quantification of analyte concentration by resonant acoustic profiling

BACKGROUND

Acoustic sensors that exploit resonating quartz crystals directly detect the binding of an analyte to a receptor. Applications include detection of bacteria, viruses, and oligonucleotides and measurement of myoglobin, interleukin 1beta (IL-1beta), and enzyme cofactors.

METHODS

Resonant Acoustic Profiling was combined with a microfluidic lateral flow device incorporating an internal reference control, stable linker chemistry, and immobilized receptors on a disposable sensor "chip". Analyte concentrations were determined by analyzing the rate of binding of the analyte to an appropriate receptor.

RESULTS

The specificity and affinity of antibody-antigen and enzyme-cofactor interactions were determined without labeling of the receptor or the analyte. We measured protein concentrations (recombinant human IL-1beta and recombinant human myoglobin) and quantified binding of cofactors (NADP+ and NAD+) to the enzyme glucose dehydrogenase. Lower limits of detection were approximately 1 nmol/L (17 ng/mL) for both IL-1beta and human myoglobin. The equilibrium binding constant for NADP+ binding to glucose dehydrogenase was 2.8 mmol/L.

CONCLUSIONS

Resonant Acoustic Profiling detects analytes in a relatively simple receptor-binding assay in <10 min. Potential applications include real-time immunoassays and biomarker detection. Combination of this technology platform with existing technologies for concentration and presentation of analytes may lead to simple, label-free, high-sensitivity methodologies for reagent and assay validation in clinical chemistry and, ultimately, for real-time in vitro diagnostics.

Profiling molecular interactions using label-free acoustic screening

As a result of more and more researchers becoming interested in proteins as potential therapeutic drug candidates, there is an increasing requirement for quick and accurate characterization of their interactions with each other and with target receptors. We describe a recent advancement in label-free analysis from Akubio, Resonant Acoustic Profiling™ (RAP™) that has the potential to change the way assays are performed and to generate novel information on molecular interactions.:

Configurational biomimesis in drug delivery: molecular imprinting of biologically significant molecules

This review focuses on trends in the macromolecular recognition of biologically significant molecules (e.g., drugs, amino acids, steroids, nucleotide bases, carbohydrates, etc.) via molecular imprinting methods. An extensive list of prior art including type of functional monomers and crosslinkers for each biomolecule imprinted polymer is presented. Representative samples of receptor-ligand dissociation constants and polymer capacities are presented as well as typical values that occur in classes of biological recognition systems. Imprinting technology has direct impact in enhanced drug loading of controlled-release carriers for the sustained release of therapeutic agents as well as robust biosensors for novel therapeutic and diagnostic devices. This review also discusses the future of designed recognition, configurational biomimesis within polymeric gels, and highlights recent efforts toward integrating imprinted polymers in controlled drug delivery systems and sensing devices. In particular, the application of imprinted polymers for sustained release, enhanced loading capacity, and enantioselective loading or release are discussed. This article also highlights the most important problems to be solved in the design of synthetic recognition-based networks for biological molecules.

Pulse mode shear horizontal-surface acoustic wave (SH-SAW) system for liquid based sensing applications

In this work, we describe a novel pulse mode shear horizontal-surface acoustic wave (SH-SAW) polymer coated biosensor that monitors rapid changes in both amplitude and phase. The SH-SAW sensors were fabricated on 36 degrees rotated Y-cut X propagating lithium tantalate (36 YX.LT). The sensitivity of the device to both mass loading and visco-elastic effects may be increased by using a thin guiding layer of cross-linked polymer. Two acoustic modes are excited by the electrodes in this crystalline direction. Metallisation of the propagation path of the 36 YX.LT devices allows the two modes to be discriminated. Successive polymer coatings resulted in the observation of resonant conditions in both modes as the layer thickness was increased. Using the 36 YX.LT devices, we have investigated the application of a novel pulse mode system by sensing a sequence of deposition and removal of a biological layer consisting of vesicles of the phospholipid POPC. A continuous wave system was used to verify the accuracy of the pulse mode system by sensing a series of poly(ethylene glycol) (PEG) solutions. The data clearly demonstrates the ability of the 36 YX.LT pulse mode system to provide rapid measurements of both amplitude and phase for biosensing applications.