Advanced Functionalized Nanoclusters (Cu, Ag, and Au) as Effective Catalyst for Organic Transformation Reactions

A considerable amount of research has been carried out in recent years on synthesizing metal nanoclusters (NCs), which have wide applications in the field of optical materials with non-linear properties, bio-sensing, and catalysis. Aside from being structurally accurate, the atomically precise NCs possess well-defined compositions due to significant tailoring, both at the surface and the core, for certain functionalities. To illustrate the importance of atomically precise metal NCs for catalytic processes, this review emphasizes 1) the recent work on Cu, Ag, and Au NCs with their synthesis, 2) the parameters affecting the activity and selectivity of NCs catalysis, and 3) the discussion on the catalytic potential of these metal NCs. Additionally, metal NCs will facilitate the design of extremely active and selective catalysts for significant reactions by elucidating catalytic mechanisms at the atomic and molecular levels. Future advancements in the science of catalysis are expected to come from the potential to design NCs catalysts at the atomic level.

Green Synthesis of Gold, Silver, Copper, and Magnetite Particles Using Poly(tartaric acid) Simultaneously as Coating and Reductant

Poly(tartaric acid) is a relatively recently described polymer that can be easily synthesized and scaled up from a readily available renewable material (tartaric acid). This article demonstrates its use in a green synthesis of gold nanoparticles, silver nanoparticles, copper particles, and magnetite nanoparticles. In this case poly(tartaric acid) acts both as a reductant and as a coating agent. To our knowledge this is the first green synthesis of several different types of nanoparticles using only one reagent (polytartrate) as both reductant and coating. The resulting particles were analyzed by XRD, TEM/SEM, EDX, FTIR, DLS, zeta-potential, XPS, and UV/VIS spectroscopy. Preliminary studies of the thermal behavior of mixtures of different types of particles with poly(tartaric acid) were also conducted. The obtained particles show different sizes depending on the material, and the coating allows for better dispersibility as well as potential further functionalization, making them potentially useful also for other applications, besides the inclusion in polymer composites.

Antimicrobial Poly (Lactic Acid)/Copper Nanocomposites for Food Packaging Materials

Composites based on polylactic acid (PLA) and copper for food packaging applications were obtained. Copper clusters were synthesized in polyethylene glycols 400 and 600, respectively, using ascorbic acid as a reducing agent, by reactive milling. Copper clusters were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FT-IR), and Ultraviolet-Visible (UV-VIS) spectroscopy. Copper/PLA composites containing Proviplast as plasticizer were characterized by FT-IR spectroscopy, mechanical tests, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), absorption of the saline solution, contact angle, and antibacterial properties. It was observed that the concentration of Copper/PEG influenced the investigated properties. The mechanical properties of the samples decreased with the increasing of Copper/PEG concentration. We recorded the phase transformation temperatures and identified the exothermic or endothermic processes. The lowest absorption values were recorded in the case of the sample containing 1% Cu. The contact angle decreases with the increase in the concentration of the PEG 600-Cu mixture in the recipes. The increase in the content of Cu clusters favors the decrease in the temperature, taking place 15% wt mass losses. The obtained composites showed antibacterial properties for all tested strains. These materials could be used as alternative materials for obtaining biodegradable food packaging.

In Situ Synthesis of Copper Nanoparticles on Dielectric Barrier Discharge Plasma-Treated Polyester Fabrics at Different Reaction pHs

Polyester (PET) fabrics are widely applied in functional textiles due to their outstanding properties such as high strength, dimensional stability, high melting point, low cost, recyclability, and flexibility. Nevertheless, the lack of polar groups in the PET structure makes its coloration and functionalization difficult. The present work reports the one-step in situ synthesis of copper nanoparticles (CuNPs) onto the PET fabric employing sodium hypophosphate and ascorbic acid as reducing and stabilizing agents, at acidic (pH 2) and alkaline pH (pH 11). This synthesis (i) used safer reagents when compared with traditional chemicals for CuNP production, (ii) was performed at a moderate temperature (85 °C), and (iii) used no protective inert gas. The dielectric barrier discharge (DBD) plasma was used as an environmentally friendly method for the surface functionalization of PET to enhance the adhesion of CuNPs. The size of the CuNPs in an alkaline reaction (76-156 nm for not treated and 93.4-123 nm for DBD plasma-treated samples) was found to be smaller than their size in acidic media (118-310 nm for not treated and 249-500 nm for DBD plasma-treated samples), where the DBD plasma treatment promoted some agglomeration. In acidic medium, metallic copper was obtained, and a reddish color became noticeable in the textile. In alkaline medium, copper(I) oxide (Cu₂O) was detected, and the PET samples exhibited a yellow color. The PET samples with CuNPs presented improved ultraviolet protection factor values. Finally, a minimal concentration of copper salt was studied to obtain the optimized antibacterial effect against Staphylococcus aureus and Escherichia coli. The functionalized samples showed strong antibacterial efficacy using low-concentration solutions in the in situ synthesis (2.0 mM of copper salt) and even after five washing cycles. The DBD plasma treatment improved the antibacterial action of the samples prepared in the alkaline medium.

Tip-Enhanced Raman Analysis of Plasmonic and Photocatalytic Properties of Copper Nanomaterials

Theoretical predictions suggest that, in addition to gold (Au) and silver (Ag), several other metals such as copper (Cu) and aluminum (Al) can be used as plasmonic materials. However, their plasmonic and photocatalytic properties remain poorly understood. In this contribution, we employed tip-enhanced Raman spectroscopy to examine photocatalytic properties of Cu nanowires and nanocubes (CuNWs and CuNCs). Our results show that both CuNWs and CuNCs demonstrate a far more efficient photocatalytic dimerization of 4-nitrobenzenethiol to 4,4'-dimercaptoazobenzene than Au nano and microplates. We also found that CuNWs and CuNCs can neither reduce 4-mercaptobenzoic acid (4-MBA) to the corresponding aromatic alcohol nor dearboxylate it forming benzenethiol. We infer that this is due to a unique coordination of 4-MBA on Cu surfaces that was only rarely observed on Au and Ag nanomaterials. Finally, we found that Cu nanostructures can oxidize 4-mercapto-phenyl-methanol to 4-MBA, which was previously only observed on gold-platinum nanoplates.

Silicone Nanofilament Support Layers in an Open-Channel System for the Fast Reduction of Para-Nitrophenol

Chemical vapor phase deposition was used to create hydrophobic nanostructured surfaces on glass slides. Subsequently, hydrophilic channels were created by sputtering a metal catalyst on the channels while masking the outside. The surface tension gradient between the hydrophilic surface in the channels and the outside hydrophobicity formed the open-channel system. The reduction of para-nitrophenol (PNP) was studied on these devices. When compared to nanostructure-free reference systems, the created nanostructures, namely, silicone nanofilaments (SNFs) and nano-bagels, had superior catalytic performance (73% and 66% conversion to 55% at 0.5 µL/s flow rate using 20 nm platinum) and wall integrity; therefore, they could be readily used multiple times. The created nanostructures were stable under the reaction conditions, as observed with scanning electron microscopy. Transition electron microscopy studies of platinum-modified SNFs revealed that the catalyst is present as nanoparticles ranging up to 13 nm in size. By changing the target in the sputter coating unit, molybdenum, gold, nickel and copper were evaluated for their catalytic efficiency. The relative order was platinum < gold = molybdenum < nickel < copper. The decomposition of sodium borohydride (NaBH₄) by platinum as a concurrent reaction to the para-nitrophenol reduction terminates the reaction before completion, despite a large excess of reducing agent. Gold had the same catalytic rate as molybdenum, while nickel was two times and copper about four times faster than gold. In all cases, there was a clear improvement in catalysis of silicone nanofilaments compared to a flat reference system.

Synthesis of a CuNP/chitosan/black phosphorus nanocomposite for non-enzymatic hydrogen peroxide sensing

A copper-chitosan-black phosphorus nanocomposite (CuNPs-Chit-BP) was fabricated by electrochemically depositing copper nanoparticles onto a black phosphorus-modified glassy carbon electrode in chitosan solution. CuNPs demonstrated a uniform distribution on the Chit-BP modified GCE with an average size of 20 nm. Electrochemical methods were used to study the catalytic activity of the CuNPs-Chit-BP nanocomposite toward hydrogen peroxide. The results showed that the synthesized nanocomposite exhibited excellent electrical conductivity, good biocompatibility and highly efficient electrocatalytic activity toward hydrogen peroxide reduction in the range of 10 μM-10.3 mM with a detection limit of 0.390 μM. The present work proposed a new strategy to explore novel BP-based non-enzymatic biosensing platforms.

Top-Open Hollow Nanocubes of Ni-Doped Cu Oxides on Ni Foam: Scalable Oxygen Evolution Electrode via Galvanic Displacement and Face-Selective Etching

Self-standing and cost-effective electrodes for high-performance oxygen evolution reaction (OER) are vital for emerging energy storage and conversion technologies. We report a scalable binder-free OER electrode with open hollow nanocubes of Ni-doped CuOx on Ni foam (hNC/NF) through spontaneous galvanic displacement followed by simple electrochemical oxidation. Face-selective etching for the unique structure of hollow nanocubes with large open ends is achieved by utilizing the different accessibility of the top and side faces of cubes to solution species, more specifically the depletion of reactants between the densely supported nanocubes. Besides, the in situ deposition on Ni foam allows spontaneous Ni doping, which, as revealed by DFT calculations, fortunately strengthens the adsorption of oxygenated intermediates and therefore could optimize the free energy path of OER on Cu oxides. Benefiting further from the high accessible surface area of the unique open hollow architecture, the hNC/NF exhibits an outstanding OER activity with a small overpotential (η = 305 mV at 10 mA cm^-2) as well as excellent stability without significant decay after 120 h operation. To our knowledge, this should represent the best OER performance of Cu-based electrocatalysts and is competitive with those based on Fe-group metals. Besides, the hNC/NF-based water electrolyzer delivers a performance of 1.50 V cell voltage at 10 mA cm^-2, offering great promise for practical application.

Synergistic effect of Cu loading on Fe sites of fly ash for enhanced catalytic reduction of nitrophenol

A novel Cu catalyst was developed using water-washed coal fly ash (WFA) as a support material for catalytic reduction of p-nitrophenol (p-NP) in the presence of NaBH₄. Cu/WFA showed ~ × 10⁵ times higher estimated rate constant k_obs-p-NP/C_Cu (L min^-1 g_Cu^-1) compared with Cu/SiO₂, Cu/Al₂O₃, and other Cu catalysts previously reported. Surprisingly, we obtained a significant lower price value (Price'/K) (0.027-0.068 USD/L min^-1) for Cu/WFA in comparison with other Cu catalysts and precious metallic catalysts (Pd, Au, Ag, and Pt). Various surface analyses and additional experiments using Fe/SiO₂, Cu/Fe₂O₃/SiO₂, and Cu/HCl-treated WFA demonstrated that Cu(0) nanoparticles were well loaded on the surface of WFA, where Fe elements were abundant, resulting in a dramatic enhancement of the Cu/WFA catalytic activity. Particularly, X-ray photoelectron spectroscopy revealed the abundance of Cu(0)/Fe(III) and Cu(0)/Fe(II) in the WFA surface. This indicates that Cu(0) was the main driving force for the activation of H_ad molecule, and that the reduction of Fe(III) to Fe(II) by NaBH₄ can accelerate the reduction of Cu(II) to Cu(0). Recycling and phytotoxicity tests showed that Cu/WFA can be applied as a reusable catalyst with low environmental impact, revealing the remarkable potential of non-precious metal/WFA catalyst in the field of environmental remediation.

Construction of Core-Shell Nanowire Arrays in a Cu-Cu2O Film Electrode for High Efficiency in Heat Dissipation

Thermal engineering dramatically impacts the efficiency of microelectronics, but the corresponding technology lags far behind the need. For energy-efficient thermal management, a Cu-Cu₂O film with highly ordered core-shell nanowire arrays and a good self-protection property was successfully fabricated using the magnetron sputtering method. The dense arrangement of nanowires in the films enhances the electronic transport property (220 mΩ sq^-1), while the modified stable Cu₂O layer maintained its perfect heat dissipation property, along with long-term thermal stability. The core-shell and nanogaps structure imparted an anisotropic thermal conductivity, where the out-plane electronic thermal conductivity (321 ± 16 W m^-1 K^-1) was 33.6 times higher than the in-plane value. To study the role of anisotropic properties in heat dissipation, a boiling experiment and thermal simulation were undertaken. The Cu-Cu₂O core-shell electrode was beneficial to elevate the heat transfer coefficient, which would cause a fast directional transport and reduction of interfacial superheating. We demonstrated that an advancement of microelectronics could be achieved by integrating Cu electrodes with an ordered architecture.

Laser Scribed Graphene Biosensor for Detection of Biogenic Amines in Food Samples Using Locally Sourced Materials

In foods, high levels of biogenic amines (BA) are the result of microbial metabolism that could be affected by temperatures and storage conditions. Thus, the level of BA is commonly used as an indicator of food safety and quality. This manuscript outlines the development of laser scribed graphene electrodes, with locally sourced materials, for reagent-free food safety biosensing. To fabricate the biosensors, the graphene surface was functionalized with copper microparticles and diamine oxidase, purchased from a local supermarket; and then compared to biosensors fabricated with analytical grade materials. The amperometric biosensor exhibits good electrochemical performance, with an average histamine sensitivity of 23.3 µA/mM, a lower detection limit of 11.6 µM, and a response time of 7.3 s, showing similar performance to biosensors constructed from analytical grade materials. We demonstrated the application of the biosensor by testing total BA concentration in fish paste samples subjected to fermentation with lactic acid bacteria. Biogenic amines concentrations prior to lactic acid fermentation were below the detection limit of the biosensor, while concentration after fermentation was 19.24 ± 8.21 mg histamine/kg, confirming that the sensor was selective in a complex food matrix. The low-cost, rapid, and accurate device is a promising tool for biogenic amine estimation in food samples, particularly in situations where standard laboratory techniques are unavailable, or are cost prohibitive. This biosensor can be used for screening food samples, potentially limiting food waste, while reducing chances of foodborne outbreaks.

A highly selective conversion of toxic nitrobenzene to nontoxic aminobenzene by Cu2O/Bi/Bi2MoO6

Cu₂O/Bi/Bi₂MoO₆, a ternary catalyst, was expertly prepared using an in situ catalytic reduction reaction.

Photo-reduced Cu/CuO nanoclusters on TiO2 nanotube arrays as highly efficient and reusable catalyst

Non-noble metal nanoparticles are becoming more and more important in catalysis recently. Cu/CuO nanoclusters on highly ordered TiO₂ nanotube arrays are successfully developed by a surfactant-free photoreduction method. This non-noble metal Cu/CuO-TiO₂ catalyst exhibits excellent catalytic activity and stability for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with the presence of sodium borohydride (NaBH₄). The rate constant of this low-cost Cu/CuO based catalyst is even higher than that of the noble metal nanoparticles decorated on the same TiO₂ substrate. The conversion efficiency remains almost unchanged after 7 cycles of recycling. The recycle process of this Cu/CuO-TiO₂ catalyst supported by Ti foil is very simple and convenient compared with that of the common powder catalysts. This catalyst also exhibited great catalytic activity to other organic dyes, such as methylene blue (MB), rhodamine B (RhB) and methyl orange (MO). This highly efficient, low-cost and easily reusable Cu/CuO-TiO₂ catalyst is expected to be of great potential in catalysis in the future.

Investigating the role of MoS2/reduced graphene oxide as cocatalyst on Cu2O activity in catalytic and photocatalytic reactions

Synergistic effect of MoS₂/rGO as cocatalyst on Cu₂O catalytic and photocatalytic activity.

Unprotected and interconnected Ru0 nano-chain networks: advantages of unprotected surfaces in catalysis and electrocatalysis

Seedless, surfactantless and support-free unprotected, metallic, interconnected nano-chain networks of ruthenium nanoparticles (NPs) were successfully synthesized via the reduction of ruthenium(iii) chloride (RuCl3) with sodium borohydride (NaBH4) at three different temperatures, viz. 30 °C, 45 °C and 60 °C. The molar ratio of RuCl3 solution and borohydride was optimized to be 1 : 1.5 to produce stable colloids with the optimum final solution pH of 9.7 ± 0.2. Average diameters of the interconnected nano-chain networks prepared at 30 °C (Ru-30), 45 °C (Ru-45) and 60 °C (Ru-60) were 3.5 ± 0.5 nm, 3.0 ± 0.2 nm and 2.6 ± 0.2 nm respectively. The morphology and composition dependent catalytic and electrocatalytic activities of these unprotected Ru nano-chain networks (Ru-30, Ru-45 and Ru-60) were studied in detail. The catalysis study was performed by investigating the transfer hydrogenation of several substituted aromatic nitro compounds. It was observed that Ru-60 was relatively more active compared to Ru-30 and Ru-45, which was reflected in their rate constant values. The electrocatalytic activities of Ru-30, Ru-45 and Ru-60 were screened for anodic water splitting in alkaline medium (0.1 M NaOH) and it was found that all of them showed almost the same activity which required an over-voltage of 308 ± 2 mV to obtain an anodic current density of 10 mA cm-2. The catalytic and electrocatalytic performances of these unprotected Ru0 networks were compared with Ru0 nanomaterials prepared under similar conditions with three different surfactants, viz. CTAB, SDS and TX-100, which revealed that unprotected Ru0 networks are better catalysts than those stabilized with surfactants. The superior catalytic and electrocatalytic performance is due to the availability of unprotected Ru0 surfaces. The present route may provide a new possibility of synthesizing other surfactant-free, unprotected metal colloids for enhanced catalytic and electrocatalytic applications.

A ternary Cu2O-Cu-CuO nanocomposite: a catalyst with intriguing activity

In this work, the syntheses of Cu2O as well as Cu(0) nanoparticle catalysts are presented. Copper acetate monohydrate produced two distinctly different catalyst particles with varying concentrations of hydrazine hydrate at room temperature without using any surfactant or support. Then both of them were employed separately for 4-nitrophenol reduction in aqueous solution in the presence of sodium borohydride at room temperature. To our surprise, it was noticed that the catalytic activity of Cu2O was much higher than that of the metal Cu(0) nanoparticles. We have confirmed the reason for the exceptionally high catalytic activity of cuprous oxide nanoparticles over other noble metal nanoparticles for 4-nitrophenol reduction. A plausible mechanism has been reported. The unusual activity of Cu2O nanoparticles in the reduction reaction has been observed because of the in situ generated ternary nanocomposite, Cu2O-Cu-CuO, which rapidly relays electrons and acts as a better catalyst. In this ternary composite, highly active in situ generated Cu(0) is proved to be responsible for the hydride transfer reaction. The mechanism of 4-nitrophenol reduction has been established from supporting TEM studies. To further support our proposition, we have prepared a compositionally similar Cu2O-Cu-CuO nanocomposite using Cu2O and sodium borohydride which however displayed lower rate of reduction than that of the in situ produced ternary nanocomposite. The evolution of isolated Cu(0) nanoparticles for 4-nitrophenol reduction from Cu2O under surfactant-free condition has also been taken into consideration. The synthetic procedures of cuprous oxide as well as its catalytic activity in the reduction of 4-nitrophenol are very convenient, fast, cost-effective, and easily operable in aqueous medium and were followed spectrophotometrically. Additionally, the Cu2O-catalyzed 4-nitrophenol reduction methodology was extended further to the reduction of electronically diverse nitroarenes. This concise catalytic process in aqueous medium at room temperature revealed an unprecedented catalytic performance which would draw attention across the whole research community.

Gum acacia–CuNp–silica hybrid: an effective, stable and recyclable catalyst for reduction of nitroarenes

The catalytic properties gum acacia–CuNps–silica hybrid was investigated in reduction of nitroarenes.

Defect-meditated efficient catalytic activity toward p-nitrophenol reduction: A case study of nitrogen doped calcium niobate system

This work reported on the synthesis of a series of nitrogen doped Ca2Nb2O7 with tunable nitrogen content that were found to be efficient and green noble-metal-free catalysts toward catalytic reduction of p-nitrophenol. XPS and ESR results indicated that the introduction of nitrogen in Ca2Nb2O7 gave rise to a large number of defective nitrogen and oxygen species. Defective nitrogen and oxygen species were found to play synergetic roles in the reduction of p-nitrophenol. The underlying mechanism is completely different from those reported for metallic nanoparticles. Moreover, the more negative conduction band edge potential enabled nitrogen doped Ca2Nb2O7 to show photo-synergistic effects that could accelerate the reduction rate toward p-nitrophenol under UV light irradiation. This work may provide a strategy for tuning the catalytic performance by modulating the chemical composition, electronic structure as well as surface defect chemistry.

Effective photoreduction of a nitroaromatic environmental endocrine disruptor by AgNPs functionalized on nanocrystalline TiO2

Unprecedented photoactivity of silver nanoparticles photodeposited on nanocrystalline TiO₂ for the efficient reduction of 4-nitrophenol at room temperature is reported.

Photo-synergistic promoted in situ generation of Bi0–BiSbO4 nanostructures as an efficient catalyst for nitrobenzene reduction

This work reports on the construction of Bi⁰–BiSbO₄ nanostructures to show photo-synergistic and efficient catalytic activity toward nitrobenzenes reduction.

Efficient size control of copper nanoparticles generated in irradiated aqueous solutions of star-shaped polyelectrolyte containers

Star-shaped poly(acrylic acid) macromolecules act as nanoreactors for the preparation of narrow-dispersed copper nanoparticles by radiation-induced reduction of copper(ii) ions.

Controllable synthesis of Cu2O hierarchical nanoclusters with high photocatalytic activity

Cu₂O hierarchical nanoclusters which are made up of many 2–7 nm grains were synthesized and have high photocatalytic activity.

Formation of nanostructured porous Cu-Au surfaces: the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu-Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu(2)O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu-Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Stable aqueous based Cu nanoparticle ink for printing well-defined highly conductive features on a plastic substrate

With the aim of inkjet printing highly conductive and well-defined Cu features on plastic substrates, aqueous based Cu ink is prepared for the first time using water-soluble Cu nanoparticles with a very thin surface oxide layer. Owing to the specific properties, high surface tension and low boiling point, of water, the aqueous based Cu ink endows a variety of advantages over conventional Cu inks based on organic solvents in printing narrow conductive patterns without irregular morphologies. It is demonstrated how the design of aqueous based ink affects the basic properties of printed conductive features such as surface morphology, microstructure, conductivity, and line width. The long-term stability of aqueous based Cu ink against oxidation is analyzed through an X-ray photoelectron spectroscopy (XPS) based investigation on the evolution of the surface oxide layer in the aqueous based ink.