Colorimetric detection of fluoride and mercury (II) ions using isatin Schiff base skeleton bearing pyridine-2-carboxamidine moiety: Experimental and theoretical studies

An isatin-Schiff base ligand (ISS) bearing a pyridine-2-carboxamidine moiety was synthesized through a facile and convenient method for the highly selective colorimetric detection of Hg+2 and F- ions. The sensing ability of the synthesized ISS sensor toward Hg+2 and F- was established using colorimetric and UV-visible techniques. The developed sensor showed excellent selectivity in the presence of other competing ions for Hg+2 and F-, with a color change from yellow to red. The limits of the detection for sensing Hg+2 and F- were calculated to be 2.9 ×10-6 M and 1.4 ×10-5 M, respectively. Job's plot based on spectroscopic data revealed a 1:1 binding stoichiometry between ISS and Hg+2 or F- ion. Furthermore, the binding mechanism, optimized structures and electronic properties of ISS, ISS-F- adduct and ISS-Hg+2 complex were investigated using density functional theory (DFT) calculations. DFT results indicated a decrease of the HOMO-LUMO energy gap for ISS upon interaction with the F- and Hg+2 species which were in good agreement with the experimental outcomes.

Fluorescence Properties of ZnOQDs-GO-g-C3N4 Nanocomposites

In this paper, the fluorescence properties of ZnOQD-GO-g-C3N4 composite materials (ZCGQDs) were studied. Firstly, the addition of a silane coupling agent (APTES) in the synthesis process was explored, and it was found that the addition of 0.04 g·mL-1 APTES had the largest relative fluorescence intensity and the highest quenching efficiency. The selectivity of ZCGQDs for metal ions was also investigated, and it was found that ZCGQDs showed good selectivity for Cu2+. ZCGQDs were optimally mixed with Cu2+ for 15 min. ZCGQDs also had good anti-interference capability toward Cu2+. There was a linear relationship between the concentration of Cu2+ and the fluorescence intensity of ZCGQDs in the range of 1~100 µM. The regression equation was found to be F0/F = 0.9687 + 0.12343C. The detection limit of Cu2+ was about 1.74 μM. The quenching mechanism was also analyzed.

Co-reactant-free self-enhanced solid-state electrochemiluminescence platform based on polyluminol-gold nanocomposite for signal-on detection of mercury ion

Development of a self-enhanced solid-state ECL platform creates a straightforward experimental design for the fabrication of point-of-care applications. Herein, we develop a promising method for self-enhanced solid-state ECL platform of polyluminol gold nanocomposite on glassy carbon electrode [(PL-Au)_nano/GCE] via simple one-step electrochemical deposition process without involving any additional co-reactants. The presence of gold nanoparticles (AuNPs) augments the electron transfer kinetics of PL (polyluminol) and enhances the solid-state ECL intensity and promotes label-free, excellent sensitivity, and selectivity to detect Hg²⁺ in physiological pH through signal-on mode. Unlike pristine PL/GCE, electrochemically co-deposited AuNPs in the (PL-Au)_nano/GCE composite, enable the co-reactant accelerator by improving the catalytic activity of PL towards oxygen reduction reaction (ORR) yielding in-situ ROS (co-reactant) generation. Further, the ECL intensity of (PL-Au)_nano/GCE composite, gradually increases with each addition of Hg²⁺ ion. This is because of the formation of an amalgamation of Au-Hg on (PL-Au)_nano/GCE composite surface which further accelerates the yield of in-situ ROS and enhances the intensity of ECL. Whereas no ECL signals changes were observed for PL/GCE composite. The proposed self-enhanced solid-state ECL platform is selectively sensing the Hg²⁺ ion in the linear range of 0.3–200 nM with a detection limit of 0.1 nM. The demonstrated (PL-Au)_nano/GCE platform might pave new avenues for further studies in the solid-state ECL platform which could be more useful in on-site monitoring of clinical bioassay and immunosensors.

A review on nanostructure-based mercury (II) detection and monitoring focusing on aptamer and oligonucleotide biosensors

Heavy metal ion pollution is a severe problem in environmental protection and especially in human health due to their bioaccumulation in organisms. Mercury (II) (Hg²⁺), even at low concentrations, can lead to DNA damage and give permanent harm to the central nervous system by easily passing through biological membranes. Therefore, sensitive detection and monitoring of Hg²⁺ is of particular interest with significant specificity. In this review, aptamer-based strategies in combination with nanostructures as well as several other strategies to solve addressed problems in sensor development for Hg²⁺ are discussed in detail. In particular, the analytical performance of different aptamer and oligonucleotide-based strategies using different signal improvement approaches based on nanoparticles were compared within each strategy and in between. Although quite a number of the suggested methodologies analyzed in this review fulfills the standard requirements, further development is still needed on real sample analysis and analytical performance parameters.

Advances in chemiluminescence and electrogenerated chemiluminescence based on silicon nanomaterials

Since 1950, when chemiluminescence (CL) of siloxane upon treatment with strong oxidants was discovered by Kurtz, many silicon-based nanomaterials with different elements, specific molecules, shapes and sizes have been developed as light emitters, energy acceptors, and catalyzers to provide valuable CL and electrogenerated CL (ECL) detection platforms in analytical chemistry fields. This review mainly focuses on the recent development of their mechanisms and sensing methodologies for small molecules, free radicals, ion, enzyme, protein, DNA, cancer cells, and metabolites based on specific reactions such as aptamer sensing and enzymatic reaction. Additionally, the future trend is discussed.

A novel rhodamine-based optical probe for mercury(II) ion in aqueous medium: A nanomolar detection, wide pH range and real water sample application

In present work, we designed and synthesized new chemosensor RPy, containing the rhodamine and 2,6-pyridinedicarboxaldehyde functionality, for the selective detection of mercury (II) (Hg²⁺) ion in aqueous DMSO solvents. The RPy acts as "turn ON" probe for Hg²⁺ ion with high selectivity and sensitivity over the series of other competing metal ions based on colorimetric and fluorimetric techniques. Due to the incorporation of two rhodamine moieties enhance the chelation sites for mercury binding, which reflects in the lowering of the detection limit up to 26 nM. The Job plot method confirms the 1:2 stoichiometric interactions between the RPy and Hg²⁺ ion. The formation of the chelation complex between RPy and Hg²⁺ ion with spirolactam ring opening was thoroughly investigated by absorption, emission, ¹H NMR, and mass analysis. The detection of Hg²⁺ ion by RPy is retained at broad pH range 4-9. Further, the probe RPy is successfully explored to measure the contamination of Hg²⁺ ion in the real water samples using spike and recovery method.

Selective mercury(ii) detection in aqueous solutions upon the absorption changes corresponding to the transition moments polarized along the short axis of an azobenzene chemosensor

A completely water-soluble azobenzene chemosensor shows selective Hg²⁺ detection properties in wide pH ranges and under different light conditions.

An electrochemiluminescence cytosensor for sensitive detection of HeLa cells based on a signal amplification strategy of Au-NaYF4:Yb,Er nanocomposites

A novel electrochemiluminescence (ECL) cytosensor was proposed for the quantitative detection of HeLa cells (human cervical cancer cells) with the help of a signal amplification strategy. Firstly, the Au-NaYF4:Yb,Er nanocomposites were prepared by a simple in situ hydrothermal method and characterized by transmission electron microscopy (TEM) images, X-ray diffraction (XRD) patterns, UV-vis spectra and Fourier transform infrared (FTIR) spectra. Compared with the bare NaYF4:Yb,Er nanocomposites, the ECL intensity of Au-NaYF4:Yb,Er nanocomposites was greatly enhanced by about 4.2-fold which can be attributed to the good conductivity of gold nanoparticles (Au NPs). The nanocomposites showed high and stable ECL emission, fast response and superior conductivity, all of which were advantageous to the ECL detection. Furthermore, HeLa cells were immobilized on the modified electrode via the interaction between folic acid and a folate receptor present on the cell surface. The ECL cytosensor showed satisfactory sensitive response to HeLa cells in a linear range of 4.25 × 102-4.25 × 105 cells per mL with a low detection limit of 326 cells per mL. The proposed cytosensor had good sensitivity and stability, which can offer a great potential platform for bioassay analysis.

Facile detection of melamine by a FAM-aptamer-G-quadruplex construct

The development of a novel method for melamine detection that uses a FAM-aptamer-G-quadruplex construct due to the efficient quenching ability of an aptamer-linked G-quadruplex is reported herein. The construct, which is labeled with the fluorescent dye 6-carboxyfluorescein (FAM), consists of two parts: a melamine-binding aptamer and a G-rich sequence that can form a G-quadruplex structure. Because of the specific recognition of melamine by the T-rich aptamer, this aptamer folds into a hairpin structure in the presence of melamine, which draws the G-quadruplex closer to the FAM fluorophore, leading to the quenching of the fluorescence of FAM. Thus, a highly sensitive and selective fluorescence strategy for assaying melamine was established. Under optimal conditions, the fluorescence quenching is proportional to the concentration of melamine within the range 10-90 nM, and the method has a detection limit of 6.32 nM. Further application of the method to plastic cup samples suggested that it permitted recoveries of between 97.15% ± 1.02 and 101.92% ± 2.07. The detected amounts of melamine spiked into the plastic cup samples and the corresponding amounts measured by HPLC were in good accordance, indicating that this fluorescent method is reliable and practical. Owing to its high sensitivity, excellent selectivity, and convenient procedure, this strategy represents a promising alternative method of melamine screening. Graphical abstract.

A nanomolar detection of mercury(II) ion by a chemodosimetric rhodamine-based sensor in an aqueous medium: Potential applications in real water samples and as paper strips

A new promising rhodamine based colorimetric and fluorometric chemosensor, RDV has been designed and synthesized for specific detection of Hg²⁺ ion. It acts as highly selective "turn-on" fluorescent chemosensor for Hg²⁺ ion without interference from other competitive metal ions in aqueous acetonitrile medium. The drastic color change with addition of Hg²⁺, from colorless to pink, indicates RDV can acts as "naked-eye" indicator for Hg²⁺. The Hg²⁺ promoted selective hydrolysis of appended vinyl ether group in RDV followed by Hg²⁺ chelated complex formation with concomitant opening of spirolactam ring is the plausible sensing mechanism. The detailed absorption, fluorescence, ¹H NMR, ¹³C NMR and mass spectrometry confirms the proposed sensing mechanism. The limit of detection (LOD) of Hg²⁺ by RDV is 136 nM indicating the high sensitivity towards Hg²⁺. The RDV shows consistent spectroscopic response in biological pH range 4-10. In addition to explore practical applicability of RDV, its paper strips have been made and used to detect Hg²⁺ in pure water solution up to 10 ppm level. Furthermore, the potential application of RDV for the sensing of Hg²⁺ in real water samples (tap water and drinking waters from different sources) were also monitored and demonstrated.

Electrochemical-Signal-Amplification Strategy for an Electrochemiluminescence Immunoassay with g-C3N4 as Tags

Signal amplification for electrochemiluminescence (ECL) has conventionally been achieved by employing effective matrixes that can accelerate the electrochemical redox processes or carry more electrochemiluminophores. Herein, a convenient signal-amplification strategy was proposed for an ECL immunoassay with carboxylated g-C₃N₄ nanosheets (NSs) as tags and carcinoembryonic antigen (CEA) as the model target via electrochemically pretreating the substrate: a glassy-carbon electrode (GCE) modified with a polymerized 2-aminoterephthalic acid (ATA) film (GCE/ATA). Bioconjugates of g-C₃N₄ NSs and the signal CEA antibody (Ab₂) (i.e., g-C₃N₄ NS-Ab₂) were immobilized on GCE/ATA via a sandwich immunoreaction to form GCE/ATA-Ab₁-Ag-Ab₂-NSs. Electrochemical-impedance spectroscopy and potential-resolved ECL characterization proved that GCE/ATA plays an important role in the electron-transfer resistance ( R_et) of the GCE/ATA-Ab₁-Ag-Ab₂-NSs for ECL and that successively scanning GCE/ATA-Ab₁-Ag-Ab₂-NSs from 0 to -1.6 V in K₂S₂O₈- and H₂O₂-containing medium could reduce the R_et and bring out 3.3-times-enhanced ECL at the 10th scan cycle compared with that of the 1st scan cycle, which was about 10.2 times the ECL of the GCE/ATA-Ab₁-Ag-Ab₂-NSs in medium containing merely K₂S₂O₈. Inspired by this, direct and successive scanning of GCE/ATA in K₂S₂O₈- and H₂O₂-containing medium was employed during fabrication, which dramatically reduced the R_et of GCE/ATA-Ab₁-Ag-Ab₂-NSs and brought out obviously enhanced ECL responses for selectively determining CEA from 0.1 pg/mL to 1 ng/mL, with a detection limit of 3 fg/mL.

Recent trends in electrochemiluminescence aptasensors and their applications

Aptamers are single stranded DNA or RNA ligands which can be selected for different targets from proteins to small organic dyes. In the past few years great progress has been accomplished in the development of aptamer based bioanalytical assays with different detection techniques. Among them, electrochemiluminescence (ECL) aptasensors are very promising because they have the advantages of both electrochemical and chemiluminescence biosensors, such as high sensitivity, low background, cost effectiveness, and ease of control. In this review, we summarize the recent efforts to construct novel and improved ECL aptasensors and their application.

Signal-On Electrochemiluminescence of Self-Ordered Molybdenum Oxynitride Nanotube Arrays for Label-Free Cytosensing

In this paper, a signal-on electrochemiluminescence (ECL) cytosensing platform was developed based on nitrogen doped molybdenum oxynitride nanotube arrays (MoO _xN _y NTs) for the first time. The MoO _xN _y NTs exhibited excellent cathodic ECL behavior with 2-(dibutylamino)-ethanol (DBAE) as a coreactant. Owing to the surface plasmon resonance (SPR) of Au triggered by the ECL emission, the generation of "hot electrons" on AuNPs hampered DBAE to give off electrons and leads to the ECL quenching. This process could be hindered via adding "barriers" on the surface of AuNPs, such as antibody molecules and cells, to achieve the signal recovery. Based on the quenching-recovering mechanism, a facile label-free ECL cytosensor was constructed. The linear response of HepG2 cells was in the range of 50-13800 cells mL^-1 with a low detection limit of 47 cells mL^-1 (S/N = 3). Moreover, the proposed ECL cytosensor exhibits a satisfying performance in the practical application. Due to the anodic formation from a Mo metal substrate, the valuable feature is that the MoO _xN _y NTs-based ECL cytosensor can be used directly, thereby providing a stable and simplified ECL cytosensing platform for future clinical applications.

Luminescent Functionalised Supramolecular Coordination Polymers Based on an Aromatic Carboxylic Acid Ligand for Sensing Hg2+ Ions

Two luminescent functionalised supramolecular coordination polymers, namely, [Zn(TPDC-2CH3)(H2O)2]·H2O (1) and [Cd(TPDC-2CH3)(H2O)4]·H2O (2), were successfully synthesised by the reaction of 2′,5′-dimethyl-[1,1′:4′,1″-terphenyl]-4,4″-dicarboxylic acid (H2TPDC-2CH3) with Zn2+ and Cd2+ ions, respectively. X-Ray crystallographic analysis reveals that both compounds 1 and 2 exhibit fascinating 3D supramolecular networks, in which metal ions are linked by ligands to form a 1D chain which further extends to a 3D structure through the interaction of hydrogen bonding. The use of 1 and 2 as luminescent sensors for the optical detection of metal ions: Na+, K+, Hg2+, Ag+, Ca2+, Co2+, Ni2+, Mn2+, Cu2+, Zn2+, Cd2+, Pb2+, Mg2+, Al3+, Fe3+, Fe2+, In3+, Bi3+, and Cr3+ was carried out in aqueous solution, and the results indicated that compound 1 could effectively detect Hg2+ ions among various cations at room temperature, with a detection limit of 3.6 × 10−15 M.

Fidelity quantification of mercury(ii) ion via circumventing biothiols-induced sequestration in enzymatic amplification system

A fidelity quantification of mercury(ii) ion based on nucleic acids amplification is developedviacircumventing biothiols-induced sequestration.

A label-free G-quadruplex-based mercury detection assay employing the exonuclease III-mediated cleavage of T-Hg2+-T mismatched DNA

We report herein the use of an exonuclease III and G-quadruplex probe to construct a G-quadruplex-based luminescence detection platform for Hg2+. Unlike common DNA-based Hg2+ detection methods, when using the dsDNA probe to monitor the hairpin formation, the intercalation of the dsDNA probe may be influenced by the distortion of dsDNA. This 'mix-and-detect' methodology utilized the G-quadruplex probe as the signal transducer and is simple, rapid, convenient to use and can detect down to 20 nM of Hg2+.

Functional nucleic acid-based sensors for heavy metal ion assays

Heavy metal contaminants such as lead ions (Pb(2+)), mercury ions (Hg(2+)) and silver ions (Ag(+)) can cause significant harm to humans and generate enduring bioaccumulation in ecological systems. Even though a variety of methods have been developed for Pb(2+), Hg(2+) and Ag(+) assays, most of them are usually laborious and time-consuming with poor sensitivity. Due to their unique advantages of excellent catalytic properties and high affinity for heavy metal ions, functional nucleic acids such as DNAzymes and aptamers show great promise in the development of novel sensors for heavy metal ion assays. In this review, we summarize the development of functional nucleic acid-based sensors for the detection of Pb(2+), Hg(2+) and Ag(+), and especially focus on two categories including the direct assay and the amplification-based assay. We highlight the emerging trends in the development of sensitive and selective sensors for heavy metal ion assays as well.

Layered MnO₂ nanosheet as a label-free nanoplatform for rapid detection of mercury(II)

A layered MnO2 nanosheet was established as a label-free fluorescent sensing platform for a rapid, sensitive and low-cost detection of mercury(II) ion in aqueous solution based on the target-induced conformational change of mercury-specific oligonucleotide (MSO) and the interactions between the fluorogenic MSO probe and MnO2 nanosheet.

A survey of advancements in nucleic acid-based logic gates and computing for applications in biotechnology and biomedicine

Nucleic acid-based logic devices were first introduced in 1994. Since then, science has seen the emergence of new logic systems for mimicking mathematical functions, diagnosing disease and even imitating biological systems. The unique features of nucleic acids, such as facile and high-throughput synthesis, Watson-Crick complementary base pairing, and predictable structures, together with the aid of programming design, have led to the widespread applications of nucleic acids (NA) for logic gate and computing in biotechnology and biomedicine. In this feature article, the development of in vitro NA logic systems will be discussed, as well as the expansion of such systems using various input molecules for potential cellular, or even in vivo, applications.

Sensitive ctDNA detection by a novel zinc(ii) complex with two-photon absorption based on electrochemiluminescence

A novel zinc(ii) complex with an intramolecular ‘push–pull’ structure displays interesting two-photon absorption properties and its corresponding ECL sensor can detect ctDNA.

An electrochemical sensing strategy based on a three dimensional ordered macroporous polyaniline–platinum platform and a mercury(ii) ion-mediated DNAzyme functionalized nanolabel

An Hg²⁺-switched DNA biosensor using a three dimensional ordered macroporous polyaniline–platinum platform and a G-rich sequence recognition probe was developed, with the detection limit of 8.7 × 10⁻¹⁴ M.

Nanomaterial-based approaches for the detection and speciation of mercury

Detection and speciation of Hg through the T–Hg–T coordination, Hg–S and/or Hg–Au/Ag interactions based colorimetric or fluorescent changes.

Synthesis of a carbon-dot-based photoluminescent probe for selective and ultrasensitive detection of Hg2+ in water and living cells

Nitrogen and sulphur co-doped carbon dots with high PL quantum yield and photostability have been synthesized by a simple hydrothermal synthesis and successfully used for bioimaging of Hg²⁺ in living cells.

G-quadruplex-based logic gates for HgII and AgI ions employing a luminescent iridium(iii) complex and extension of metal-mediated base pairs by polymerase

We report herein the synthesis of a series of cyclometallated iridium(iii) complexes as luminescent G-quadruplex-selective probes to construct AND, OR and INHIBIT logic gates for the detection of Hg^II and Ag^I ions.

A multifunctional label-free electrochemical impedance biosensor for Hg(2+), adenosine triphosphate and thrombin

A multifunctional label-free biosensor for the detection of Hg(2+), adenosine triphosphate and thrombin has been developed based on the changing of the electrochemical impedance spectroscopy (EIS) from the modified electrodes when nucleic acid subunits interacting with different targets. The modified electrode consists of three interaction sections, including DNA with T-T mismatch recognizing Hg(2+) to form T-Hg(2+)-T complex, split DNA chip against ATP, and DNA domin against thrombin to form G-quadruplex. Upon DNA interaction with thrombin or ATP, an increased charge transfer resistance (Rct) had been detected. However, a decreased Rct against Hg(2+) was obtained. The Rct difference (ΔRct) has relationship with the concentration of the different targets, Hg(2+), ATP and thrombin can be selectively detected with the detection limit of 0.03, 0.25, and 0.20 nmol L(-1), respectively. To separately detect the three analytes existing in the same sample, ATP aptamer, G-rich DNA strands and EDTA were applied to mask ATP, Hg(2+) or thrombin separately.

Ethynyl and π-stacked thymine-Hg2+-thymine base pairs enhanced fluorescence quenching via photoinduced electron transfer and simple and sensitive mercury ion sensing

Ethynyl triggered enhanced fluorescence quenching effect was first reported based on photoinduced electron transfer (PET) between fluorophore and ethynyl. Ethynyl and 6-carboxyl-fluorescein (FAM) were labeled at the 5'- and 3'-termini of a poly d(T) sequence containing three thymine units, respectively. In the presence of Hg(2+), Hg(2+) binds to two thymine residues through T-Hg(2+)-T interactions and the formed T-Hg(2+)-T base pairs bring FAM and ethynyl from two matched sequences into close proximity. On the one hand, π-stacked T-Hg(2+)-T mediates and accepts electron transfer of the excited state of FAM and quenches the fluorescence through PET. On the other hand, π-stacked interactions between ethynyl and FAM also provide a de-excitation process for the excited state of FAM via PET and trigger an enhanced fluorescence quenching. On the basis of fluorescence quenching, a simple, rapid, and sensitive Hg(2+) sensor was constructed; under optimum conditions, a good linear relationship was obtained over the concentration range of 5-150 nM for Hg(2+) and a very low detection limit (0.42 nM) was reached. The developed system was further designed as a cysteine (Cys) sensor based on fluorescence recovery resulted from the strong interaction between Cys and Hg(2+); the proposed Cys sensor has a linear range of 10-550 nM and a detection limit of 2.5 nM. The two sensors were used for analysis of real samples and the satisfactory results were achieved.

Ultrasensitive, rapid, and selective detection of mercury using graphene assisted laser desorption/ionization mass spectrometry

We report an extremely sensitive and specific detection of mercuric ions (Hg²⁺) based on graphene assisted laser desorption/ionization mass spectrometry (GALDI-MS). Combining the highly selective coordination interactions between thymine (T) and Hg²⁺, we present a simple, effective, and novel approach, based on π-π interactions of the T-Hg²⁺-T complex and G that can serve as a platform and matrix for GALDI-MS. The present sensor not only exhibits high selectivity and sensitivity (picomolar) to Hg²⁺ in aqueous solution, but also can elucidate the chemical structures of the metal complexes. The significant advantage in the current approach is that there is no need for a sophisticated instrument, and no sample pretreatment is required to detect the Hg²⁺ ions.

An electrochemiluminescence biosensor for sensitive and selective detection of Hg2+ based on π-π interaction between nucleotides and ferrocene-graphene nanosheets

A solid-state electrochemiluminescence (ECL) biosensor based on a DNA-modified electrode platform that depends on the variation of π-π interaction before and after the binding of target analytes is put forward. The single-stranded DNA (ssDNA) probe was successfully assembled on the surface of a glassy carbon electrode (GCE), which was pre-modified with Ru(bpy)₃ ²⁺ complex and gold nanoparticles (GNPs). The ssDNA probe could strongly adsorb graphene due to the strong π-π interaction between nucleotides and graphene (GN), while in the presence of Hg²⁺, the conformational transformation of DNA from a single-stranded to a double-stranded structure resulted in inhibited adsorption of GN. With thymine (T)-rich ssDNA as a Hg²⁺ probe, we prepared the ECL biosensor by using ferrocene-graphene (Fc-GN) as a quenching unit to quench the ECL emission of Ru(bpy)₃ ²⁺, and the Hg²⁺ can be detected by quenching efficiency transformation when the Fc-GN gets away from Ru(bpy)₃ ²⁺. The biosensor exhibited a sensitive response to various ranges of concentration of Hg²⁺ with a detection limit of 18 pM. The ECL biosensor held great promise in the highly sensitive and selective detection of Hg²⁺ in natural water.

A G-quadruplex-based platform for the detection of Hg2+ ions using a luminescent iridium(iii) complex

We report herein the synthesis of a series of cyclometalated iridium(iii) complexes as luminescent G-quadruplex-selective probes, which were used to construct an oligonucleotide-based platform for the dual detection and removal of Hg²⁺ ions.

Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification

Herein, a novel sensitive pseudobienzyme electrocatalytic DNA biosensor was proposed for mercury ion (Hg(2+)) detection by using autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification. Thiol functionalized capture DNA was firstly immobilized on a nano-Au modified glass carbon electrode (GCE). In presence of Hg(2+), the specific coordination between Hg(2+) and T could result in the assembly of primer DNA on the electrode, which successfully triggered the HCR to form the hemin/G-quadruplex DNAzyme nanowires with substantial redox probe thionine (Thi). In the electrolyte of PBS containing NADH, the hemin/G-quadruplex nanowires firstly acted as an NADH oxidase to assist the concomitant formation of H2O2 in the presence of dissolved O2. Then, with the redox probe Thi as electron mediator, the hemin/G-quadruplex nanowires acted as an HRP-mimicking DNAzyme that quickly bioelectrocatalyzed the reduction of produced H2O2, which finally led to a dramatically amplified electrochemical signal. This method has demonstrated a high sensitivity of Hg(2+) detection with the dynamic concentration range spanning from 1.0 ng L(-1) to 10 mg L(-1) Hg(2+) and a detection limit of 0.5 ng L(-1) (2.5 pM) at the 3Sblank level, and it also demonstrated excellent selectivity against other interferential metal ions.