Characterization and application of a DNA aptamer binding to L-tryptophan

Harnessing DNA computing and nanopore decoding for practical applications: from informatics to microRNA-targeting diagnostics

DNA computing represents a subfield of molecular computing with the potential to become a significant area of next-generation computation due to the high programmability inherent in the sequence-dependent molecular behaviour of DNA. Recent studies in DNA computing have extended from mathematical informatics to biomedical applications, with a particular focus on diagnostics that exploit the biocompatibility of DNA molecules. The output of DNA computing devices is encoded in nucleic acid molecules, which must then be decoded into human-recognizable signals for practical applications. Nanopore technology, which utilizes an electrical and label-free decoding approach, provides a unique platform to bridge DNA and electronic computing for practical use. In this tutorial review, we summarise the fundamental knowledge, technologies, and methodologies of DNA computing (logic gates, circuits, neural networks, and non-DNA input circuity). We then focus on nanopore-based decoding, and highlight recent advances in medical diagnostics targeting microRNAs as biomarkers. Finally, we conclude with the potential and challenges for the practical implementation of these techniques. We hope that this tutorial will provide a comprehensive insight and enable the general reader to grasp the fundamental principles and diverse applications of DNA computing and nanopore decoding, and will inspire a wide range of scientists to explore and push the boundaries of these technologies.

Ultrahigh Throughput Evolution of Tryptophan Synthase in Droplets via an Aptamer Sensor

Tryptophan synthase catalyzes the synthesis of a wide array of noncanonical amino acids and is an attractive target for directed evolution. Droplet microfluidics offers an ultrahigh throughput approach to directed evolution (up to 107 experiments per day), enabling the search for biocatalysts in wider regions of sequence space with reagent consumption minimized to the picoliter volume (per library member). While the majority of screening campaigns in this format on record relied on an optically active reaction product, a new assay is needed for tryptophan synthase. Tryptophan is not fluorogenic in the visible light spectrum and thus falls outside the scope of conventional droplet microfluidic readouts, which are incompatible with UV light detection at high throughput. Here, we engineer a tryptophan DNA aptamer into a sensor to quantitatively report on tryptophan production in droplets. The utility of the sensor was validated by identifying five-fold improved tryptophan synthases from ∼100,000 protein variants. More generally, this work establishes the use of DNA-aptamer sensors with a fluorogenic read-out in widening the scope of droplet microfluidic evolution.

Development of a label-free impedimetric aptasensor based on Zr-MOF and titaniom carbide nanosheets for detection of L-tryptophan

This study primarily focuses on the L-Tryptophan (Trp) biomarker assay, with particular attention given to its objectives. The investigation centers on the potential implications of imbalanced Trp levels and its associated metabolites, which have been attributed to the spectrum of both psychological and physiological disorders, encompassing conditions such as cancer. Therefore, the swift and accurate detection of this amino acid is of paramount importance in cancer monitoring, as it plays a crucial role in preventing the metastasis and spread of cancer cells. Thus, an electrochemical aptasensor was designed based on nanocomposite of AgNPs@UiO-66/Ti3C2 (MXene) as immobilization strategy for the ultrasensitive detection of Trp. Zirconium metal-organic frameworks (Zr-MOFs) were employed as carriers for silver nanoparticles to facilitate subsequent binding with aptamers. Markedly, the obtained results show that the constructed aptasensor can specifically detect Trp in the two concentration range from 1fM to 1 nM and 1 nM to 200 nM and with a low detection limit of 0.35 fM. When applied to real samples, the experimental results demonstrated positive recovery rates. Consequently, a discerning and sensitive electrochemical aptasensor devoid of labeling agents was successfully fabricated for the explicit purpose of Trp detection.

Improving aptamer performance: key factors and strategies

Aptamers are functional single-stranded oligonucleotide fragments isolated from randomized libraries by Systematic Evolution of Ligands by Exponential Enrichment (SELEX), exhibiting excellent affinity and specificity toward targets. Compared with traditional antibody reagents, aptamers display many desirable properties, such as low variation and high flexibility, and they are suitable for artificial and large-scale synthesis. These advantages make aptamers have a broad application potential ranging from biosensors, bioimaging to therapeutics and other areas of application. However, the overall performance of aptamer pre-selected by SELEX screening is far from being satisfactory. To improve aptamer performance and applicability, various post-SELEX optimization methods have been developed in the last decade. In this review, we first discuss the key factors that influence the performance or properties of aptamers, and then we summarize the key strategies of post-SELEX optimization which have been successfully used to improve aptamer performance, such as truncation, extension, mutagenesis and modification, splitting, and multivalent integration. This review shall provide a comprehensive summary and discussion of post-SELEX optimization methods developed in recent years. Moreover, by discussing the mechanism of each approach, we highlight the importance of choosing the proper method to perform post-SELEX optimization.

Structural properties and binding mechanism of DNA aptamers sensing saliva melatonin for diagnosis and monitoring of circadian clock and sleep disorders

Circadian desynchrony with the external light-dark cycle influences the rhythmic secretion of melatonin which is among the first signs of circadian rhythm sleep disorders. An accurate dim light melatonin onset (established indicator of circadian rhythm sleep disorders) measurement requires lengthy assays, and antibody affinities alterations, especially in patients with circadian rhythm disorders whose melatonin salivary levels vary significantly, making antibodies detection mostly inadequate. In contrast, aptamers with their numerous advantages (e.g., target selectivity, structural flexibility in tuning binding affinities, small size, etc.) can become preferable biorecognition molecules for salivary melatonin detection with high sensitivity and specificity. This study thoroughly characterizes the structural property and binding mechanism of a single-stranded DNA aptamer full sequence (MLT-C-1) and its truncated versions (MLT-A-2, MLT-A-4) to decipher its optimal characteristics for saliva melatonin detection. We use circular dichroism spectroscopy to determine aptamers' conformational changes under different ionic strengths and showed that aptamers display a hairpin loop structure where few base pairs in the stem play a significant role in melatonin binding and formation of aptamer stabilized structure. Through microscale thermophoresis, aptamers demonstrated a high binding affinity in saliva samples (MLT-C-1F K_d = 12.5 ± 1.7 nM; MLT-A-4F K_d = 11.2 ± 1.6 nM; MLT-A-2F K_d = 2.4 ± 2.8 nM; limit-of-detection achieved in pM, highest sensitivity attained for MLT-A-2F aptamer with the lowest detection limit of 1.35 pM). Our data suggest that aptamers are promising as biorecognition molecules and provide the baseline parameters for the development of an aptamer-based point-of-care diagnostic system for melatonin detection and accurate profiling of its fluctuations in saliva.

A system for multiplexed selection of aptamers with exquisite specificity without counterselection

Aptamers have the capacity to discriminate between structurally similar small molecules. However, generating such highly specific aptamers has proven challenging using conventional processes based on counterselection against nontarget molecules. In this work, we describe a high-throughput screening platform that can characterize the specificity of millions of aptamers toward a group of structurally related molecules in a single experiment and generate exquisitely specific aptamers without any counterselection. As exemplars, we generated aptamers with high affinity and specificity toward three structurally related kynurenine metabolites using our platform. Our platform can be readily adapted to other small-molecule targets and should therefore accelerate the development of aptamer reagents with exquisite specificity.

Aptamers have proven to be valuable tools for the detection of small molecules due to their remarkable ability to specifically discriminate between structurally similar molecules. Most aptamer selection efforts have relied on counterselection to eliminate aptamers that exhibit unwanted cross-reactivity to interferents or structurally similar relatives to the target of interest. However, because the affinity and specificity characteristics of an aptamer library are fundamentally unknowable a priori, it is not possible to determine the optimal counterselection parameters. As a result, counterselection experiments require trial-and-error approaches that are inherently inefficient and may not result in aptamers with the best combination of affinity and specificity. In this work, we describe a high-throughput screening process for generating high-specificity aptamers to multiple targets in parallel while also eliminating the need for counterselection. We employ a platform based on a modified benchtop sequencer to conduct a massively parallel aptamer screening process that enables the selection of highly specific aptamers against multiple structurally similar molecules in a single experiment, without any counterselection. As a demonstration, we have selected aptamers with high affinity and exquisite specificity for three structurally similar kynurenine metabolites that differ by a single hydroxyl group in a single selection experiment. This process can easily be adapted to other small-molecule analytes and should greatly accelerate the development of aptamer reagents that achieve exquisite specificity for their target analytes.

ProtSeq: Toward high-throughput, single-molecule protein sequencing via amino acid conversion into DNA barcodes

We demonstrate early progress toward constructing a high-throughput, single-molecule protein sequencing technology utilizing barcoded DNA aptamers (binders) to recognize terminal amino acids of peptides (targets) tethered on a next-generation sequencing chip. DNA binders deposit unique, amino acid-identifying barcodes on the chip. The end goal is that, over multiple binding cycles, a sequential chain of DNA barcodes will identify the amino acid sequence of a peptide. Toward this, we demonstrate successful target identification with two sets of target-binder pairs: DNA-DNA and Peptide-Protein. For DNA-DNA binding, we show assembly and sequencing of DNA barcodes over six consecutive binding cycles. Intriguingly, our computational simulation predicts that a small set of semi-selective DNA binders offers significant coverage of the human proteome. Toward this end, we introduce a binder discovery pipeline that ultimately could merge with the chip assay into a technology called ProtSeq, for future high-throughput, single-molecule protein sequencing.

•

Designed ProtSeq protein sequencing method compatible with widely used NGS technology

•

Built Target-Switch SELEX to isolate aptamers specific to N-terminal amino acids (AAs)

•

Showed binding, ligation, cleavage, and NGS of six DNA binders in ordered barcode chain

•

Developed pipeline to deconvolve AAs from DNA barcodes to identify putative proteins

A small-molecule chemical interface for molecular programs

In vitro molecular circuits, based on DNA-programmable chemistries, can perform an increasing range of high-level functions, such as molecular level computation, image or chemical pattern recognition and pattern generation. Most reported demonstrations, however, can only accept nucleic acids as input signals. Real-world applications of these programmable chemistries critically depend on strategies to interface them with a variety of non-DNA inputs, in particular small biologically relevant chemicals. We introduce here a general strategy to interface DNA-based circuits with non-DNA signals, based on input-translating modules. These translating modules contain a DNA response part and an allosteric protein sensing part, and use a simple design that renders them fully tunable and modular. They can be repurposed to either transmit or invert the response associated with the presence of a given input. By combining these translating-modules with robust and leak-free amplification motifs, we build sensing circuits that provide a fluorescent quantitative time-response to the concentration of their small-molecule input, with good specificity and sensitivity. The programmability of the DNA layer can be leveraged to perform DNA based signal processing operations, which we demonstrate here with logical inversion, signal modulation and a classification task on two inputs. The DNA circuits are also compatible with standard biochemical conditions, and we show the one-pot detection of an enzyme through its native metabolic activity. We anticipate that this sensitive small-molecule-to-DNA conversion strategy will play a critical role in the future applications of molecular-level circuitry.

Selection of DNA Aptamers for Root Exudate l-Serine Using Multiple Selection Strategies

Agricultural biosensing can aid decisions about crop health and maintenance, because crops release root exudates that can inform about their status. l-Serine has been found to be indicative of nitrogen uptake in wheat and canola. The development of a biosensor for l-serine could allow farmers to monitor crop nutrient demands more precisely. The development of robust l-serine-binding DNA aptamers is described. Because small molecules can be challenging targets for Systematic Evolution of Ligands by EXponential enrichment (SELEX), three separate DNA libraries were used for SELEX experiments. A l-homocysteine aptamer was randomized to create a starting library for a l-serine selection (randomized SELEX). The final selection rounds of the l-homocysteine selection were also used as a starting library for l-serine (redirected SELEX). Finally, an original DNA library was used (original SELEX). All three SELEX experiments produced l-serine-binding aptamers with micromolar affinity, with Red.1 aptamer having a K_d of 7.9 ± 3.6 μM. Truncation improved the binding affinity to 5.2 ± 2.7 μM, and from this sequence, a Spiegelmer with improved nuclease resistance was created with a K_d of 2.0 ± 0.8 μM. This l-serine-binding Spiegelmer has the affinity and stability to be incorporated into aptamer-based biosensors for agricultural applications.

Simultaneous determination of zearalenone and ochratoxin A based on microscale thermophoresis assay with a bifunctional aptamer

Nowadays, contamination of various mycotoxins in crops and their products exposes increasing risks to human health. Efficient determination methods are urgently needed. Herein, a bifunctional aptamer and a simple aptasensor based on microscale thermophoresis assay (MST) were constructed for the first time for simultaneous determination of two mycotoxins, i.e. zearalenone (ZEN) and ochratoxin A (OTA). The bifunctional aptamer was engineered by splicing a ZEN aptamer and an OTA aptamer with a linker according to the structure analysis of aptamers. The binding mechanism of the bifunctional aptamer to ZEN and OTA were revealed basing on the molecular docking studies. The MST assay proved that the bifunctional aptamer showed high affinity and specificity towards ZEN and OTA. Furthermore, a bifunctional aptamer-based MST-aptasensor was developed for simultaneous detection of ZEN and OTA in corn oil sample. The MST-aptasensor provided a limit of detection (LOD) of 0.12 nM, with satisfactory recoveries of 93.31-104.19% and excellent selectivity, indicating that the bifunctional aptamer and MST-aptasensor had great potential in practical applications.

Investigation of the recognition interaction between glycated hemoglobin and its aptamer by using surface plasmon resonance

Glycated hemoglobin (HbA1c) has been widely explored as an important marker for monitoring and diagnosing diabetes. Due to the advantages of high selectivity, easy preparation, and convenient preservation of aptamers, research on glycated hemoglobin detection utilizing aptasensors has received much attention in recent years. However, factors such as the pH and the salt concentration of the solution and the structure of the aptamer could influence the interactions between HbA1c and the aptamer. In this study, the factors were evaluated using surface plasmon resonance (SPR). The results show that the pH and the salt concentration can greatly affect the formation of a complex between the aptamer and HbA1c. In the stereostructure of the aptamer, loop L1 may be an important motif for recognizing glycated hemoglobin. In addition, the best condition for detecting HbA1c was at pH 6, with a high sensitivity and a low limit of detection(LOD) (1.06 × 10^-3RUnM /2.55 nM). The results also demonstrated that the use of an SPR aptamer biosensor can be a sensitive technique to improve the accuracy and correctness of HbA1c measurement.

Synthesis and characterisation of novel 4,6-dimethoxyindole-7- and -2-thiosemicarbazone derivatives: Biological evaluation as antioxidant and anticholinesterase candidates

Two sets of novel indole-based thiosemicarbazone systems 8a–d and 9a–d are prepared by the Schiff base condensation reaction of indole carbaldehydes 4 and 6 with a range of thiosemicarbazides 7a–d in high yields and purity. The antioxidant properties of the synthesised compounds 8a–d and 9a–d are determined by employing three different assays, namely 2,2-diphenyl-1-picrylhydrazyl hydrate–free radical scavenging, ABTS [2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] cationic radical decolarization and cupric ion reducing antioxidant capacity. The anticholinesterase properties of the products are investigated by acetylcholinesterase and butyrylcholinesterase enzyme inhibition assays. The methyl-substituted compounds 8b and 9b display the highest inhibition for the ABTS assay and absorbance values for the cupric ion reducing antioxidant capacity assay, while compound 9c shows the best activity for 2,2-diphenyl-1-picrylhydrazyl hydrate assay. Moderate inhibition of acetylcholinesterase and butyrylcholinesterase is determined in the case of compound 8b.

Ultrasensitive and reusable electrochemical aptasensor for detection of tryptophan using of [Fe(bpy)3](p-CH3C6H4SO2)2 as an electroactive indicator

In this paper, we report the application of a reusable electrochemical aptasensor for detection of tryptophan by using [Fe(bpy)₃](p-CH₃C₆H₄SO₂)₂ as an electroactive indicator and based on the target-compelled aptamer displacement. The aptasensor fabricated by self-assembling the thiolated probe on the surface of graphite screen-printed electrode modified with gold nanoparticles/multiwalled carbon nanotubes and chitosan nanocomposite (AuNPs/MWCNTs-Chit/SPE). Afterward, Trp aptamer (Apt) immobilized on the modified electrode surface through hybridization. In the absence of Trp, a sharp peak of [Fe(bpy)₃](p-CH₃C₆H₄ SO₂)₂ can be observed in differential pulse voltammetry (DPV) study. The introduction of Trp led to the formation of aptamer-Trp complex and dissociation of the aptamer from the DNA-Apt duplex on the electrode surface into the solution and decreases the peak current intensity of electroactive indicator. This is because, [Fe(bpy)₃](p-CH₃C₆H₄SO₂)₂ tends to bind to the two strands DNA. Therefore, the peak current of [Fe(bpy)₃](p-CH₃C₆H₄ SO₂)₂ linearly decreased with increasing the concentration of Trp over a range of 3.0 nM- 100 μM. The detection limit (3 σ) was 1.0 nM. In addition, we examined the selectivity of the constructed biosensor for tyrosine, histidine, arginine, lysine, valine and methionine that belonged to the amino acid family. The obtained results showed that the fabricated sensor had a good selectivity for Trp against the other examined amino acids. Also, the potential applicability of the aptasensor was investigated by detecting the Trp in a complex media such as human blood plasma spiked with Trp.

Critical Review: DNA Aptasensors, Are They Ready for Monitoring Organic Pollutants in Natural and Treated Water Sources?

There is a growing need to monitor anthropogenic organic contaminants detected in water sources. DNA aptamers are synthetic single-stranded oligonucleotides, selected to bind to target contaminants with favorable selectivity and sensitivity. These aptamers can be functionalized and are used with a variety of sensing platforms to develop sensors, or aptasensors. In this critical review, we (1) identify the state-of-the-art in DNA aptamer selection, (2) evaluate target and aptamer properties that make for sensitive and selective binding and sensing, (3) determine strengths and weaknesses of alternative sensing platforms, and (4) assess the potential for aptasensors to quantify environmentally relevant concentrations of organic contaminants in water. Among a suite of target and aptamer properties, binding affinity is either directly (e.g., organic carbon partition coefficient) or inversely (e.g., polar surface area) correlated to properties that indicate greater target hydrophobicity results in the strongest binding aptamers, and binding affinity is correlated to aptasensor limits of detection. Electrochemical-based aptasensors show the greatest sensitivity, which is similar to ELISA-based methods. Only a handful of aptasensors can detect organic pollutants at environmentally relevant concentrations, and interference from structurally similar analogs commonly present in natural waters is a yet-to-be overcome challenge. These findings lead to recommendations to improve aptasensor performance.

Aptamer Recognition of Multiplexed Small-Molecule-Functionalized Substrates

Aptamers are chemically synthesized oligonucleotides or peptides with molecular recognition capabilities. We investigated recognition of substrate-tethered small-molecule targets, using neurotransmitters as examples, and fluorescently labeled DNA aptamers. Substrate regions patterned via microfluidic channels with dopamine or   l-tryptophan were selectively recognized by previously identified dopamine or l-tryptophan aptamers, respectively. The on-substrate dissociation constant determined for the dopamine aptamer was comparable to, though, slightly greater than the previously determined solution dissociation constant. Using prefunctionalized neurotransmitter-conjugated oligo(ethylene glycol) alkanethiols and microfluidics patterning, we produced multiplexed substrates to capture and to sort aptamers. Substrates patterned with l-3,4-dihydroxyphenylalanine, l- threo-dihydroxyphenylserine, and l-5-hydroxytryptophan enabled comparison of the selectivity of the dopamine aptamer for different targets via simultaneous determination of in situ binding constants. Thus, beyond our previous demonstrations of recognition by protein binding partners (i.e., antibodies and G-protein-coupled receptors), strategically optimized small-molecule-functionalized substrates show selective recognition of nucleic acid binding partners. These substrates are useful for side-by-side target comparisons and future identification and characterization of novel aptamers targeting neurotransmitters or other important small molecules.

Recent advances in chromatographic purification of plasmid DNA for gene therapy and DNA vaccines: A review

The wide spread of infectious diseases have provoked the scientists to develop new types of vaccines. Among the different types of vaccines, the recently discovered plasmid DNA vaccines, have gained tremendous attentions in the last few decades as a modern approach of vaccination. The scientific interest in plasmid DNA vaccines is attributed to their prominent efficacy as they trigger not only the cellular immune response but also the humoral immune responses. Moreover, pDNA vaccines are easily to be stored, shipped and produced. However, the purification of the pDNA vaccines is a crucial step in their production and administration, which is usually conducted by different chromatographic techniques. This review summarizes the most recent chromatographic purification methods provided in the literature during the last five years following our last review in 2013, including affinity chromatography, hydrophobic interaction chromatography, ion exchange chromatography, multimodal chromatography, sample displacement chromatography and miscellaneous chromatographic methods.

Aptamers Selected for Recognizing Amyloid β-Protein-A Case for Cautious Optimism

Aptamers are versatile oligonucleotide ligands used for molecular recognition of diverse targets. However, application of aptamers to the field of amyloid β-protein (Aβ) has been limited so far. Aβ is an intrinsically disordered protein that exists in a dynamic conformational equilibrium, presenting time-dependent ensembles of short-lived, metastable structures and assemblies that have been generally difficult to isolate and characterize. Moreover, despite understanding of potential physiological roles of Aβ, this peptide has been linked to the pathogenesis of Alzheimer disease, and its pathogenic roles remain controversial. Accumulated scientific evidence thus far highlights undesirable or nonspecific interactions between selected aptamers and different Aβ assemblies likely due to the metastable nature of Aβ or inherent affinity of RNA oligonucleotides to β-sheet-rich fibrillar structures of amyloidogenic proteins. Accordingly, lessons drawn from Aβ–aptamer studies emphasize that purity and uniformity of the protein target and rigorous characterization of aptamers’ specificity are important for realizing and garnering the full potential of aptamers selected for recognizing Aβ or other intrinsically disordered proteins. This review summarizes studies of aptamers selected for recognizing different Aβ assemblies and highlights controversies, difficulties, and limitations of such studies.

Amplified Detection of the Aptamer-Vanillin Complex with the Use of Bsm DNA Polymerase

The electrochemical detection of interactions between aptamers and low-molecular-weight targets often lacks sensitivity. Signal amplification improves the detection of the aptamer-analyte complex; Bsm DNA polymerase was used to amplify the signal from the interaction of vanillin and its aptamer named Van_74 on an ion-sensitive field-effect transistor (ISFET)-based biosensor. The aptamer was immobilized on the ISFET sensitive surface. A short DNA probe was hybridized with the aptamer and dissociated from it upon vanillin addition. A free probe interacted with a special DNA molecular beacon initiated the Bsm DNA polymerase reaction that was detected by ISFET. A buffer solution suitable for both aptamer action and Bsm DNA polymerase activity was determined. The ISFET was shown to detect the Bsm DNA polymerase reaction under the selected conditions. Vanillin at different concentrations (1 × 10-6-1 × 10-8 M) was detected using the biosensor with signal amplification. The developed detection system allowed for the determination of vanillin, starting at a 10-8 M concentration. Application of the Bsm DNA polymerase resulted in a 15.5 times lower LoD when compared to the biosensor without signal amplification (10.1007/s00604-017-2586-4).

Sequence requirements of oligonucleotide chiral selectors for the capillary electrophoresis resolution of low-affinity DNA binders

We recently reported that a great variety of DNA oligonucleotides (ONs) used as chiral selectors in partial-filling capillary electrophoresis (CE) exhibited interesting enantioresolution properties toward low-affinity DNA binders. Herein, the sequence prerequisites of ONs for the CE enantioseparation process were studied. First, the chiral resolution properties of a series of homopolymeric sequences (Poly-dT) of different lengths (from 5 to 60-mer) were investigated. It was shown that the size increase-dependent random coil-like conformation of Poly-dT favorably acted on the apparent selectivity and resolution. The base-unpairing state constituted also an important factor in the chiral resolution ability of ONs as the switch from the single-stranded to double-stranded structure was responsible for a significant decrease in the analyte selectivity range. Finally, the chemical diversity enhanced the enantioresolution ability of single-stranded ONs. The present work could lay the foundation for the design of performant ON chiral selectors for the CE separation of weak DNA binder enantiomers.

Microbead-Based Platform for Multiplex Detection of DNA and Protein

We present a novel microbead-based detection platform as a simple and universal strategy for simultaneous determination of multiple biomolecules. This platform is composed of streptavidin coated uniform-sized polystyrene microbeads, dye and biotin-labeled ssDNA or aptamer probes, and quencher-labeled complementary sequences. By this method, upon target binding to the probes, quencher strand dissociation is triggered, which results in fluorescence reactivation of the microbead linked probes. The fluorescence variation is readily monitored by flow cytometry and with a high sensitivity. Explicitly, this microbead-based detection platform shows a high sensitivity for target DNA with a detection limit as low as 0.20 nM, alongside good selectivity from one-base mismatched DNA. This novel platform also shows good selectivity and high sensitivity for protein detection when aptamer is used as a probe. The detection limit for lysozyme is as low as 8.56 nM. Moreover, simultaneous detection of multiple targets has been achieved via incorporating different dye-labeled probes on the microbeads concurrently. We have also applied this developed strategy to the detection of target DNA in human serum. This strategy can be easily extended to other targets through simple probe and quencher variation.

Stereochemistry-Guided DNA Probe for Single Nucleotide Polymorphisms Analysis

Single nucleotide polymorphisms (SNPs) are the most abundant genetic polymorphisms and are responsible for many genetic diseases and cancers. In general, SNPs detection is performed by a single probe system (SPS), in which a single probe specifically hybridizes to one target. However, with the use of this method it is hard to improve the hybridization specificity and single mismatched discrimination factors (DF). In addition, the multiprobe system (MPS) requires complex probe designs and introduces at least one auxiliary probe except for the probe complementary to the target, resulting in a complicated detection system. Faced with these difficulties, we perform the SNP detection using a d/l-tryptophan (Trp) guided DNA probe and regulate the DF of electrochemical DNA (E-DNA) sensors by molecular chirality. We show that the DF of the d-Trp incubated E-DNA sensor (d-sensor) is larger than that of the l-sensor. More importantly, we achieve the high specificity by coupling d-Trp and l-Trp incubated E-DNA sensors, and the median DF is 7.21. Furthermore, the specificity of SNP detection can be further improved by supersandwich assay, and the median DF is enlarged to 37.23, which is comparable to that obtained with a multiprobe detection system.

Generating Cell Targeting Aptamers for Nanotheranostics Using Cell-SELEX

Detecting and understanding changes in cell conditions on the molecular level is of great importance for the accurate diagnosis and timely therapy of diseases. Cell-based SELEX (Systematic Evolution of Ligands by EXponential enrichment), a foundational technology used to generate highly-specific, cell-targeting aptamers, has been increasingly employed in studies of molecular medicine, including biomarker discovery and early diagnosis/targeting therapy of cancer. In this review, we begin with a mechanical description of the cell-SELEX process, covering aptamer selection, identification and identification, and aptamer characterization; following this introduction is a comprehensive discussion of the potential for aptamers as targeting moieties in the construction of various nanotheranostics. Challenges and prospects for cell-SELEX and aptamer-based nanotheranostic are also discussed.

L-tryptophan and dipeptide derivatives for supercoiled plasmid DNA purification

The present study focus on the preparation of chromatography supports for affinity-based chromatography of supercoiled plasmid purification. Three l-tryptophan based supports are prepared through immobilization on epoxy-activated Sepharose and characterized by HR-MAS NMR. The SPR is employed for a fast screening of l-tryptophan derivatives, as potential ligands for the biorecognition of supercoiled isoform, as well as, to establish the suitable experimental conditions for the chromatography. The results reveal that the overall affinity is high (KD=10(-9) and 10(-8)M) and the conditions tested show that the use of HEPES 100mM enables the separation and purification of supercoiled at T=10°C. The STD-NMR is performed to accomplish the epitope mapping of the 5'-mononucleotides bound to l-tryptophan derivatives supports. The data shows that the interactions between the three supports and the 5'-mononucleotides are mainly hydrophobic and π-π stacking. The chromatography experiments are performed with l-tryptophan support and plasmids pVAX-LacZ and pPH600. The supercoiled isoform separation is achieved at T=10°C by decreasing the concentration of (NH4)2SO4 from 2.7 to 0M in HEPES for pVAX-LacZ and 2.65M to 0M in HEPES for pPH600. Overall, l-tryptophan derivatives can be a promising strategy to purify supercoiled for pharmaceutical applications.

Controlled DNA Patterning by Chemical Lift-Off Lithography: Matrix Matters

Nucleotide arrays require controlled surface densities and minimal nucleotide-substrate interactions to enable highly specific and efficient recognition by corresponding targets. We investigated chemical lift-off lithography with hydroxyl- and oligo(ethylene glycol)-terminated alkanethiol self-assembled monolayers as a means to produce substrates optimized for tethered DNA insertion into post-lift-off regions. Residual alkanethiols in the patterned regions after lift-off lithography enabled the formation of patterned DNA monolayers that favored hybridization with target DNA. Nucleotide densities were tunable by altering surface chemistries and alkanethiol ratios prior to lift-off. Lithography-induced conformational changes in oligo(ethylene glycol)-terminated monolayers hindered nucleotide insertion but could be used to advantage via mixed monolayers or double-lift-off lithography. Compared to thiolated DNA self-assembly alone or with alkanethiol backfilling, preparation of functional nucleotide arrays by chemical lift-off lithography enables superior hybridization efficiency and tunability.

An electrochemical molecular recognition-based aptasensor for multiple protein detection

This article reports a simple electrochemical approach for the detection of multiple proteins (thrombin and lysozyme) using Dabcyl-labeled aptamer modified metal nanoparticles (DLAPs). DLAPs were immobilized on β-cyclodextrins (β-CDs) modified electrode by means of host-guest self-assembly. During the time of detection, the aptamers' structure will change due to the specific binding with corresponding proteins that forced DLAPs far away from the electrode that had been modified by β-CDs. Thus, the capture of target proteins onto DLAPs was translated via the electrochemical current signal offered by metal nanoparticles. Linearity of the aptasensor for quantitative measurements was demonstrated. Determinations of proteins in human real serum samples were also performed to demonstrate detection in real clinical samples.

Chiral resolution capabilities of DNA oligonucleotides

Herein, we studied the chiral resolution properties of a repertoire of arbitrarily chosen DNA oligonucleotides (ON). Ten oligonucleotidic sequences characterized by diverse base compositions, sizes, and structural features, ranging from secondary structure-free homo-oligonucleotides to duplex, hairpin, and three-way junction architectures, were investigated as potential chiral selectors. Their enantioselective features were assessed by using ONs as running buffer additives in partial-filling capillary electrophoresis. It was shown that all the screened sequences displayed enantiodiscrimination capabilities toward small aromatic compounds. Under (sub)millimolar DNA concentration conditions, the combination of only three oligonucleotidic sequences provided the chiral resolution of around 20 racemates, including drugs, illegal drugs, amino-acids, and nucleosides. This work represents the first demonstration of such analyte selectivity spectrum for nucleic acid-based chiral separation tools.

Nanoscaled aptasensors for multi-analyte sensing

Introduction: Nanoscaled aptamers (Aps), as short single-stranded DNA or RNA oligonucleotides, are able to bind to their specific targets with high affinity, upon which they are considered as powerful diagnostic and analytical sensing tools (the so-called "aptasensors"). Aptamers are selected from a random pool of oligonucleotides through a procedure known as "systematic evolution of ligands by exponential enrichment".

Methods: In this work, the most recent studies in the field of aptasensors are reviewed and discussed with a main focus on the potential of aptasensors for the multianalyte detection(s).

Results: Due to the specific folding capability of aptamers in the presence of analyte, aptasensors have substantially successfully been exploited for the detection of a wide range of small and large molecules (e.g., drugs and their metabolites, toxins, and associated biomarkers in various diseases) at very low concentrations in the biological fluids/samples even in presence of interfering species.

Conclusion: Biological samples are generally considered as complexes in the real biological media. Hence, the development of aptasensors with capability to determine various targets simultaneously within a biological matrix seems to be our main challenge. To this end, integration of various key scientific dominions such as bioengineering and systems biology with biomedical researches are inevitable.

Recognition and sensing of low-epitope targets via ternary complexes with oligonucleotides and synthetic receptors

Oligonucleotide-based receptors or aptamers can interact with small molecules, but the ability to achieve high-affinity and specificity of these interactions depends strongly on functional groups or epitopes displayed by the binding targets. Some classes of targets are particularly challenging: for example, monosaccharides have scarce functionalities and no aptamers have been reported to recognize, let alone distinguish from each other, glucose and other hexoses. Here we report aptamers that differentiate low-epitope targets such as glucose, fructose or galactose by forming ternary complexes with high-epitope organic receptors for monosaccharides. In a follow-up example, we expand this method to isolate high-affinity oligonucleotides against aromatic amino acids complexed in situ with a nonspecific organometallic receptor. The method is general and enables broad clinical use of aptamers for the detection of small molecules in mix-and-measure assays, as demonstrated by monitoring postprandial waves of phenylalanine in human subjects.

Determination of free tryptophan in serum with aptamer--comparison of two aptasensors

Two aptasensors based on graphene oxide (GO) and molecular beacon were designed for the detection of L-tryptophan (L-Trp) using L-Trp aptamer (Trp3a-1). The fluorescein (FAM) labeled Trp3a-1 was absorbed by GO, which resulted in the fluorescence quenching, and exhibiting minimal background fluorescence. Upon the addition of L-Trp, Trp3a-1 was not absorbed quickly. This effect allows for a quantitative assay of L-Trp over the concentration range of 10-500 μM and with a detection limit of 6.84 μM. However, due to the unspecific adsorption of GO, the GO based aptasensor can't be applied in complex matrixes. In respect of molecular beacon based aptasensor, FRET between Trp3a-1 labeled with FAM and CS-Trp3a-1 labeled with BHQ-1(black hole quencher-1) which is partially complementary with the aptamer was used to detect L-Trp. L-Trp binding could induce the disassociation of CS-Trp3a-1, resulted in the enhancement of fluorescence in solution. With an excellent linear relationship in 10-500 μM and a detection limit of 6.97 μM in 25% serum, the aptasensor is expected to be improved for the detection of free L-Trp in other complex samples.

DNA aptamer evolved by cell-SELEX for recognition of prostate cancer

Morbidity and mortality of prostate cancer (PCa) have increased in recent years worldwide. Currently existing methods for diagnosis and treatment do not make the situation improve, especially for hormone refractory prostate cancer (HRPC). The lack of molecular probes for PCa hindered the early diagnosis of metastasis and accurate staging for PCa. In this work, we have developed a new aptamer probe Wy-5a against PCa cell line PC-3 by cell-SELEX technique. Wy-5a shows high specificity to the target cells with dissociation constants in the nanomolar range, and does not recognize other tested PCa cell lines and other tested tumor cell lines. The staining of clinical tissue sections with fluorescent dye labeled Wy-5a shows that sections from high risk group with metastasis exhibited stronger fluorescence and sections from Benign Prostatic Hyperplasia (BPH) did not exhibit notable fluorescence, which suggests that aptamer Wy-5a may bind to protein related to the progression of PCa. The high affinity and specificity of Wy-5a makes this aptamer hold potential for application in diagnosis and target therapy of PCa.

Fluorescence sensing of adenosine deaminase based on adenosine induced self-assembly of aptamer structures

A new approach is proposed for simple detection of adenosine deaminase (ADA) based on adenosine induced self-assembly of two pieces of single-stranded DNA (ssDNA). These ssDNA are two fragments of the aptamer that has a strong affinity for adenosine and are labeled with carboxyfluorescein and black hole quencher-1, respectively. The complementarities of the bases in the two pieces of ssDNA are insufficient to form a stable structure. In the presence of adenosine, however, the ssDNA can be assembled into the intact aptamer tertiary structure, which results in fluorescence quenching of the carboxyfluorescein-labeled aptamer fragment. As a result, the adenosine-ssDNA complex shows a low background signal, which is rather desired for achieving sensitive detection. Reaction of the complex with ADA causes a great fluorescence enhancement by converting adenosine into inosine that has no affinity for the aptamer. This behaviour leads to the development of a simple and sensitive fluorescent method for assaying ADA activity, with a detection limit of 0.05 U mL(-1), which is more sensitive than most of the existing approaches. Furthermore, the applicability of the method has been demonstrated by detecting ADA in mouse serum samples.

Preparative separation of enantiomers based on functional nucleic acids modified gold nanoparticles

The preparative-scale separation of chiral compounds is vitally important for the pharmaceutical industry and related fields. Herein we report a simple approach for rapid preparative separation of enantiomers using functional nucleic acids modified gold nanoparticles (AuNPs). The separation of DL-tryptophan (DL-Trp) is demonstrated as an example to show the feasibility of the approach. AuNPs modified with enantioselective aptamers were added into a racemic mixture of DL -Trp. The aptamer-specific enantiomer (L-Trp) binds to the AuNPs surface through aptamer-L-Trp interaction. The separation of DL-Trp is then simply accomplished by centrifugation: the precipitate containing L-Trp bounded AuNPs is separated from the solution, while the D-Trp remains in the supernatant. The precipitate is then redispersed in water. The aptamer is denatured under 95 °C and a second centrifugation is then performed, resulting in the separation of AuNPs and L-Trp. The supernatant is finally collected to obtain pure L-Trp in water. The results show that the racemic mixture of DL-Trp is completely separated into D-Trp and L-Trp, respectively, after 5 rounds of repeated addition of fresh aptamer-modified AuNPs to the DL-Trp mixture solution. Additionally, the aptamer-modified AuNPs can be repeatedly used for at least eight times without significant loss of its binding ability because the aptamer can be easily denatured and renatured in relatively mild conditions. The proposed approach could be scaled up and extended to the separation of other enantiomers by the adoption of other enantioselective aptamers.

A label-free electrochemical biosensor based on a DNA aptamer against codeine

In order to develop a sensor for opium alkaloid codeine detection, DNA aptamers against codeine were generated by SELEX (systematic evolution of ligands by exponential enrichment) technique. An aptamer HL7-14, which is a 37-mer sequence with Kd values of 0.91 μM, was optimized by the truncation-mutation assay. The specificity investigation shows that HL7-14 exhibits high specificity to codeine over morphine, and almost cannot bind to other small molecule. With this new selected aptamer, a novel electrochemical label-free codeine aptamer biosensor based on Au-mesoporous silica nanoparticles (Au-MSN) as immobilized substrate has been proposed using [Fe(CN)6](3-/4-) as electroactive redox probe. The linear range covered from 10 pM to 100 nM with correlation coefficient of 0.9979 and the detection limit was 3 pM. Our study demonstrates that the biosensor has good specificity, stability and well regeneration. It can be used to detect codeine.

Differentiation of enantiomers by capillary electrophoresis

Capillary electrophoresis (CE) has matured to one of the major liquid phase enantiodifferentiation techniques since the first report in 1985. This can be primarily attributed to the flexibility as well as the various modes available including electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC), and microemulsion electrokinetic chromatography (MEEKC). In contrast to chromatographic techniques, the chiral selector is mobile in the background electrolyte. Furthermore, a large variety of chiral selectors are available that can be easily combined in the same separation system. In addition, the migration order of the enantiomers can be adjusted by a number of approaches. In CE enantiodifferentiations the separation principle is comparable to chromatography while the principle of the movement of the analytes in the capillary is based on electrophoretic phenomena. The present chapter will focus on mechanistic aspects of CE enantioseparations including enantiomer migration order and the current understanding of selector-selectand structures. Selected examples of the basic enantioseparation modes EKC, MEKC, and MEEKC will be discussed.

Label-free aptamer-based partial filling technique for enantioseparation and determination of DL-tryptophan with micellar electrokinetic chromatography

In this study, a simple and reproducible method for enantioseparation and determination of dl-tryptophan (DL-Trp) was developed by using a partial filling technique in combination with MEKC. The corresponding L-Trp specific DNA aptamer was used as a chiral selector. Sodium cholate was used to form the chiral micelles and to enhance the enantioseparation of the enantiomers. Effects of aptamer concentration, filling time, buffer composition, and separation voltage on the enantioseparation were evaluated. The Mg(2+) and Na(+) concentration in separation buffer was found to effectively affect the separation efficiency and reproducibility. Under the optimal conditions, D- and L-Trp were completely enantioseparated in less than 9 min. This aptamer-based partial-filling approach has the potential to be extended to the separation of other enantiomers after the replacement of corresponding specific aptamers.

Challenges and opportunities for small molecule aptamer development

Aptamers are single-stranded oligonucleotides that bind to targets with high affinity and selectivity. Their use as molecular recognition elements has emerged as a viable approach for biosensing, diagnostics, and therapeutics. Despite this potential, relatively few aptamers exist that bind to small molecules. Small molecules are important targets for investigation due to their diverse biological functions as well as their clinical and commercial uses. Novel, effective molecular recognition probes for these compounds are therefore of great interest. This paper will highlight the technical challenges of aptamer development for small molecule targets, as well as the opportunities that exist for their application in biosensing and chemical biology.

Challenges and opportunities for small molecule aptamer development

Aptamers are single-stranded oligonucleotides that bind to targets with high affinity and selectivity. Their use as molecular recognition elements has emerged as a viable approach for biosensing, diagnostics, and therapeutics. Despite this potential, relatively few aptamers exist that bind to small molecules. Small molecules are important targets for investigation due to their diverse biological functions as well as their clinical and commercial uses. Novel, effective molecular recognition probes for these compounds are therefore of great interest. This paper will highlight the technical challenges of aptamer development for small molecule targets, as well as the opportunities that exist for their application in biosensing and chemical biology.

Functional-group specific aptamers indirectly recognizing compounds with alkyl amino group

Aptamers are usually generated against a specific molecule. Their high selectivity makes them only suitable for studying specific targets. Since it is nearly impossible to generate aptamers for every molecule, it can be of great interest to select aptamers recognizing a common feature of a group of molecules in many applications. In this paper, we describe the selection of aptamers for indirect recognition of alkyl amino groups. Because amino groups are small and positive charged, we introduced a protection group, p-nitrobenzene sulfonyl (p-nosyl) to convert them into a form suitable for aptamer selection. Taking N(ε)-p-nosyl-L-lysine (PSL) as a target, we obtained a group of aptamers using the SELEX technique. Two optimized aptamers, M6b-M14 and M13a exhibit strong affinity to PSL with the K(d) values in the range of 2-5 μM. They also show strong affinity to other compounds containing p-nosyl-protected amino groups except those also possessing an α-carboxyl group. Both aptamers adopt an antiparallel G-quadruplex structure when binding to targets. An aptamer beacon based on M6b-M14 showed good selectivity toward the reaction mixture of p-nosyl-Cl and alkyl amino compounds, and could recognize lysine from amino acid mixtures indirectly, suggesting that aptamers against a common moiety of a certain type of molecules can potentially lead to many new applications. Through this study, we have demonstrated the ability to select aptamers for a specific part of an organic compound, and the chemical conversion approach may prove to be valuable for aptamer selection against molecules that are generally difficult for SELEX.

G-quadruplex DNA aptamers for zeatin recognizing

Zeatins, a major type of cytokinin, are ubiquitous in higher plants, and involve in regulating a wide range of developmental processes. The development of highly specific ligands to zeatins would be very useful in plant biological research. Here we describe a group of oligonucleotide ligands (aptamers) generated against trans-zeatin. The optimized aptamers possess strong affinity to trans-zeatin and trans-zeatin riboside (Kd=3-5 μM), and relatively weak affinity (Kd=27-30 μM) to cis-zeatin and dihydrozeatin. These aptamers adopt a hairpin-G-quadruplex structure for binding to zeatin. A fluorescence turn-on aptasensor based on graphene oxide (GO) was developed for the recognition of zeatins. The specificity assay of this aptasensor shows good response to zeatins, and no response to the adenine derivatives (analog of zeatins) abundantly existing in biological samples. These results show the great potential of these aptamers in chemical analysis and biological investigation of zeatins.