Copper-catalyzed one-pot synthesis of alpha-functionalized imidates

Synthesis of nicotinimidamides via a tandem CuAAC/ring-cleavage /cyclization/oxidation four-component reaction and their cytotoxicity

Nicotinamide and its derivatives, recognized as crucial drug intermediates, have been a focal point of extensive chemical modifications and rigorous pharmacological studies. Herein, a series of novel nicotinamide derivatives, nicotinimidamides, were synthesized via a tandem CuAAC/ring-cleavage/cyclization/oxidation four-component reaction procedure from O-acetyl oximes, terminal ynones, sulfonyl azides, and NH4OAc. This strategy is significantly more efficient than previously reported, and the cytotoxicity of the nicotinimidamides is also tested. This project not only exhibits a sustainable and eco-friendly domino methodology for the creation of nicotinimidamides but also presents a promising candidate for liver cancer treatment.

Beyond 1,2,3-triazoles: Formation and Applications of Ketemines Derived from Copper Catalyzed Azide Alkyne Cycloaddition

Ketemines represent an interesting class of organic intermediates that has undergone a regrowth as a consequence of recent extensions of copper catalyzed azide alkyne cycloaddition (Cu- AAC) to other synthetic fields. This review summarizes the most recent generation methods of ketimines from CuAAC reaction, highlighting chemical properties focused on the synthesis of cyclic compounds, among others, affording a general outlook towards the development of new biologically active compounds.

Sequential Cu(II)-Catalyzed Multicomponent C-N Coupling, Nucleophilic Addition, and Cyclization Cascade: A Diastereoselective Approach to Carboxamide-Embedded Hexahydrobenzofuran Core

Cascade or domino reactions serve as a powerful technique for the synthesis of complex organic scaffolds in one pot. Herein, a Cu(II)-catalyzed and silica gel-assisted multicomponent reaction (MCR) between bromoalkyne-tethered cyclohexadienones, amides, and water for the construction of hexahydrobenzofuran-3-carboxamide is developed. The reaction proceeds via a C-N coupling reaction followed by hydrative cyclization of ynamide intermediates. Notably, good to excellent diastereoselectivity is complementary of this reaction.

Copper-Catalyzed One-Step Formation of Four C-N Bonds toward Polyfunctionalized Triazoles via Multicomponent Reaction

A novel four-component reaction of alkynes, amines, azides, and 2H-azirines has been developed for the first time by the efficient formation of four C-N bonds in one step under mild conditions, rapidly preparing polyfunctionalized triazoles with molecular diversity involving three different intermediates of copper-acetylide, copper-allenylidene, and copper-vinyl nitrene. Propargylic ester is disclosed as a "three-in-one" building block possessing triplicate cycloaddition and nucleophilic and electrophilic properties, which could enable such a four-component transformation by high yields, broad substrate scope, and functionalization.

The Copper-Catalyzed Reaction of 2-(1-Hydroxyprop-2-yn-1-yl)phenols with Sulfonyl Azides Leading to C3-Unsubstituted N-Sulfonyl-2-iminocoumarins

An operationally simple synthesis of Z-configured and C3-unsubstituted N-sulfonyl-2-iminocoumarins (e.g., 8a) that proceeds under mild conditions is achieved by reacting 2-(1-hydroxyprop-2-yn-1-yl)phenols (e.g., 6a) with sulfonyl azides (e.g., 7a). The cascade process involved likely starts with a copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction. This is followed by ring-opening of the resulting metalated triazole (with accompanying loss of nitrogen), reaction of the ensuing ketenimine with the pendant phenolic hydroxyl group, and finally dehydration of the (Z)-N-(4-hydroxychroman-2-ylidene)sulfonamide so formed.

Copper catalyzed five-component domino strategy for the synthesis of nicotinimidamides

A library of medicinally and synthetically important nicotinimidamides was synthesized by a copper-catalyzed multicomponent domino reaction of oxime esters, terminal ynones, sulfonyl azides, aryl aldehydes and acetic ammonium. Its synthetic pathway involves the formation of a highly reactive N-sulfonyl acetylketenimine, characterized by high selectivity, combinations of potential nucleophiles and electrophiles, mild reaction conditions and a wide substrate scope, and is a rare five-component example of a CuAAC/ring-opening reaction.

Selectivity for Alkynyl or Allenyl Imidamides and Imidates in Copper-Catalyzed Reactions of Terminal 1,3-Diynes and Azides

Copper-catalyzed reactions of terminal 1,3-diynes with electron-deficient azides to generate either 3-alkynyl or 2,3-dienyl imidamides and imidates are described. The selectivity depends on the diyne substituents and the nucleophile that reacts with the ketenimide intermediate generated from the corresponding triazole precursor. Reactions of 1,3-diynes containing a propargylic acetate afford [3]cumulenyl imidamides, while reactions using methanol as the trapping agent selectively generate 2,3-dienyl imidates. Five-membered heterocycles were obtained from 1,3-diynes containing a homopropargylic hydroxyl or amine substituent.

Cu-Catalyzed four-component polymerization of alkynes, sulfonyl azides, nucleophiles and electrophiles

A four-component polymerization method was reported using diynes, sulfonyl azides, diols, and a variety of electrophiles. Such a strategy facilitated the facile preparation of a series of α-functionalized poly(N-sulfonylimidates)s.

Efficient Copper-Catalyzed Multicomponent Synthesis of N-Acyl Amidines via Acyl Nitrenes

Direct synthetic routes to amidines are desired, as they are widely present in many biologically active compounds and organometallic complexes. N-Acyl amidines in particular can be used as a starting material for the synthesis of heterocycles and have several other applications. Here, we describe a fast and practical copper-catalyzed three-component reaction of aryl acetylenes, amines, and easily accessible 1,4,2-dioxazol-5-ones to N-acyl amidines, generating CO₂ as the only byproduct. Transformation of the dioxazolones on the Cu catalyst generates acyl nitrenes that rapidly insert into the copper acetylide Cu–C bond rather than undergoing an undesired Curtius rearrangement. For nonaromatic dioxazolones, [Cu(OAc)(Xantphos)] is a superior catalyst for this transformation, leading to full substrate conversion within 10 min. For the direct synthesis of N-benzoyl amidine derivatives from aromatic dioxazolones, [Cu(OAc)(Xantphos)] proved to be inactive, but moderate to good yields were obtained when using simple copper(I) iodide (CuI) as the catalyst. Mechanistic studies revealed the aerobic instability of one of the intermediates at low catalyst loadings, but the reaction could still be performed in air for most substrates when using catalyst loadings of 5 mol %. The herein reported procedure not only provides a new, practical, and direct route to N-acyl amidines but also represents a new type of C–N bond formation.

Copper-Catalyzed Diversity-Oriented Synthesis (DOS) of 4-Amino-2H-chromen-2-imines: Application of Kemp Elimination toward O-Heterocycles

We report herein a copper-catalyzed sequential multicomponent reaction of benzo[d]isoxazoles with terminal alkynes and sulfonyl azides, which produced divergent 4-amino-2H-chromen-2-imines with excellent chemical selectivity. The reaction tolerated a broad range of functional groups, and released only N₂ as the sole byproduct. The sulfonyl imino group could be removed to give biologically active free 4-amino-2H-chromenone in good yield.

1,3-Dien-5-ynes: Versatile Building Blocks for the Synthesis of Carbo- and Heterocycles

1,3-Dien-5-ynes have been extensively used as starting materials for the synthesis of a wide number of different carbo- and heterocycles. The aim of this review is to give an overview of their utility in organic synthesis, highlighting the variety of compounds that can be directly accessed from single reactions over these systems. Thus, cycloaromatization processes are initially commented, followed by reactions directed toward the syntheses of five-membered rings, other carbocycles and, finally, heterocycles. The diverse methodologies that have been developed for the synthesis of each of these types of compounds from 1,3-dien-5-ynes are presented, emphasizing the influence of the reaction conditions and the use of additional reagents in the outcome of the transformations.

Copper-catalyzed three-component cascade reaction of alkynes, sulfonyl azides and simple aldehydes/ketones

A copper-catalyzed dimethylzinc-promoted three-component cascade reaction of alkynes, sulfonyl azides, and simple aldehydes or ketones is described, which delivers polysubstituted olefins expeditiously in one pot under mild conditions.

Copper(I)-Y Zeolite-Catalyzed Regio- and Stereoselective [2 + 2 + 2] Cyclotrimerization Cascade: An Atom- and Step-Economical Synthesis of Pyrimido[1,6-a]quinoline

An elegant copper(I)-Y zeolite-catalyzed tandem process, involving ketenimine-based termolecular [2 + 2 + 2]/[NC + CC + NC] cycloaddition, using sulfonyl azide, alkyne, and quinoline, to prepare pyrimido[1,6-a]quinolines is reported. In this straightforward, highly atom- and step-economical protocol, copper(I) promotes for azide-alkyne [3 + 2] cycloaddition which is followed by ring-rearrangement/ketenimine formation/regio- and stereoselective [2 + 2 + 2] termolecular cycloaddition and dehydrogenation cascade to yield selectively the E-isomer of pyrimido[1,6-a]quinoline.

One-pot synthesis of hydrazono-sulfonamide adducts using Cu(BTC) MOF catalyst and their remarkable AIEE properties: unprecedented copper(ii)-catalyzed generation of ketenimine

One pot & simple operation; short reaction time; no column purification; very less catalyst loading; scalable.

Cyclization of sulfide, ether or tertiary amine-tethered N-sulfonyl-1,2,3-triazoles: a facile synthetic protocol for 3-substituted isoquinolines or dihydroisoquinolines

A novel cyclization reaction of sulfide, ether or tertiary amine-tethered N-sulfonyl-1,2,3-triazoles, has been developed, efficiently affording 3-substituted isoquinoline or dihydroisoquinoline derivatives.

An efficient approach for the construction of benzazepine and benzoxepine derivatives

A novel and facile synthetic protocol for the construction of benzazepine and benzoxepine derivatives through a copper(I)-catalyzed reaction of 2-(2-ethynylphenyl)-1-tosylaziridine or 2-(2-ethynylphenyl)oxirane with sulfonyl azides is disclosed. A ketenimine is the key intermediate during the reaction process.

Sulfonyl and phosphoryl azides: going further beyond the click realm of alkyl and aryl azides

Whereas alkyl and aryl azides readily react with terminal alkynes to afford 1,4-disubstituted-1,2,3-triazoles in excellent yields and selectivity in the presence of a copper catalyst, sulfonyl, phosphoryl, and certain acyl azides allow additional chemistry upon ring-opening of the corresponding copper-triazole intermediates. The amazingly versatile new chemistry stems from the high reactivity of a ring-opened ketenimine intermediate, with which a wide range of nucleophiles react to give multicomponent products. Among those nucleophiles, amines, alcohols, water, and heterocyclic compounds are especially capable of being involved in this new chemistry.

Diversity-oriented approach to 1,2-dihydroisoquinolin-3(4H)-imines viacopper(i)-catalyzed reaction of (E)-2-ethynylphenylchalcone, sulfonyl azide and amine

A three-component reaction of (E)-2-ethynylphenylchalcone, sulfonyl azide, and amine catalyzed by copper(i) chloride generates 1,2-dihydroisoquinolin-3(4H)-imines in good to excellent yields.