Functionalized graphene and graphene oxide solution via polyacrylate coating

Degradation of phenol by ball-milled activated carbon (ACBM) activated dual oxidant (persulfate/calcium peroxide) system: Effect of preadsorption and sequential injection

This study explored pre-adsorption and sequential injection of dual oxidant (DuOx) of persulfate (PS) and calcium peroxide (CP) for phenol degradation in an aqueous solution. Ball-milled activated carbon (AC_BM) was used as the catalyst in the following systems: pre-adsorption and sequential injection of PS and CP (AC_BM + PS + CP), pre-adsorption and simultaneous injection of PS and CP (AC_BM + PS/CP), simultaneous injection of AC_BM, PS, and CP (AC_BM/PS/CP), simultaneous injection of AC_BM and PS (AC_BM/PS), and simultaneous injection of AC_BM and CP (AC_BM/CP). The AC_BM had a larger specific surface area, more graphitic structures, and more defects. Moreover, it showed better phenol removal when introduced simultaneously with PS and CP. The phenol removal was most the efficient in AC_BM + PS + CP (98.8%) with a near-neutral final pH, followed by AC_BM + PS/CP, AC_BM/PS, AC_BM/PS/CP, and AC_BM/CP. This indicates that pre-adsorption and separate injection of PS and CP were the key strategy for improved performance and maintained favorable pH for the activation of PS and CP. The dual oxidant system (PS/CP) is superior to single oxidant systems (PS or CP). Scavenger experiments and the electron spin resonance spectra (ESR) demonstrated that non-radical species (¹O₂) were dominantly involved in AC_BM + PS + CP, but radical species (HO^•, SO₄^•-) also contributed. HCO₃^- and HPO₄^2- inhibited phenol degradation in AC_BM + PS + CP, whereas Cl^- and HA had negligible effects. The AC_BM + PS + CP showed high total organic carbon removal and AC_BM was recyclable with a slight decrease in activity. This work is important as it provides a detailed insight into the strategy of pre-adsorption and sequential injection of dual oxidants for a practical and cost-effective method of groundwater remediation.

A nonenzymatic reduced graphene oxide-based nanosensor for parathion

Organophosphate-based pesticides (e.g., parathion (PT)) have toxic effects on human health through their residues. Therefore, cost-effective and rapid detection strategies need to be developed to ensure the consuming food is free of any organophosphate-residue. This work proposed the fabrication of a robust, nonenzymatic electrochemical-sensing electrode modified with electrochemically reduced graphene oxide (ERGO) to detect PT residues in environmental samples (e.g., soil, water) as well as in vegetables and cereals. The ERGO sensor shows a significantly affected electrocatalytic reduction peak at -0.58 V (vs Ag/AgCl) for rapid quantification of PT due to the amplified electroactive surface area of the modified electrode. At optimized experimental conditions, square-wave voltammetric analysis exhibits higher sensitivity (50.5 μA·μM^-1·cm^-2), excellent selectivity, excellent stability (≈180 days), good reproducibility, and repeatability for interference-free detection of PT residues in actual samples. This electrochemical nanosensor is suitable for point-of-care detection of PT in a wide dynamic range of 3 × 10^-11-11 × 10^-6 M with a lower detection limit of 10.9 pM. The performance of the nanosensor was validated by adding PT to natural samples and comparing the data via absorption spectroscopy. PT detection results encourage the design of easy-to-use nanosensor-based analytical tools for rapidly monitoring other environmental samples.

Enhanced nonlinear optical properties of a π-conjugated porphyrin dimer–graphene nanocomposite

A more conjugated nanocomposite and a potential NLO candidate with a strong intrasystem interaction were constructed using a rarely mentioned porphyrin dimer and graphene.

Hepatotoxicity of graphene oxide in Wistar rats

Graphene oxide (GO) has a multitude of applications in areas of nanomedicine, electronics, textile, water purification, and catalysis among others. GO is relatively easier to manufacture and customize as compared with other carbon-based nanomaterials. In the present work, GO was administered intraperitoneally to adult Wistar rats in four incremental doses, i.e., 0.0 mg/kg (control), 0.4 mg/kg (low dose), 2.0 mg/kg (mid-dose), and 10.0 mg/kg (high dose). After 15 repeated doses over a period of 30 days, biochemical assays for alanine transaminase (ALT), aspartate transaminase (AST), alkaline phosphatase (ALP), catalase (CAT), and malondialdehyde (MDA) were carried out. Histopathological and morphometric analyses of liver and kidney were also performed. Results demonstrated dose-dependent toxicity of GO. General behavior and liver indices remained unaffected in the study. Serum levels of ALT, ALP, and AST were altered significantly in high-dose treated animals. Changes were found insignificant in the low- and mid-dose groups. Catalase activity in liver tissue homogenates was decreased in the high-dose group. MDA levels were found elevated in treated rats. Unlike control and low dose, mid- and high-dose treated rats exhibited varying degrees of histopathological changes like inflammation around the central vein and portal veins, vacuolations, hepatocytic injury, and near normal to abnormal hepatic sinusoids. These findings show that GO has considerable toxic potential to mammalian liver and thorough toxicity studies are needed before these nanosheets are used in biomedicine.

An ultrasensitive, homogeneous fluorescence quenching immunoassay integrating separation and detection of aflatoxin M1 based on magnetic graphene composites

A homogeneous fluorescence quenching immunoassay is described for simultaneous separation and detection of aflatoxin M₁ (AFM₁) in milk. The novel assay relies on monoclonal antibody (mAb) functionalized Fe₃O₄ decorated reduced-graphene oxide (rGO-Fe₃O₄-mAb) as both capture probe and energy acceptor, combined with tetramethylrhodamine cadaverine-labeled aflatoxin B₁ (AFB₁-TRCA) as the energy donor. In the assay, AFB₁-TRCA binds to rGO-Fe₃O₄-mAb in the absence of AFM₁, quenching the fluorescence of TRCA by resonance energy transfer. Significantly, the immunoassay integrates sample preparation and detection into a single step, by using magnetic graphene composites to avoid washing and centrifugation steps, and the assay can be completed within 10 min. Under optimized conditions, the visual and quantitative detection limits of the assay for AFM₁ were 50 and 3.8 ng L^-1, respectively, which were significantly lower than those obtained by fluorescence polarization immunoassay using the same immunoreagents. Owing to its operation and highly sensitivity, the proposed assay provides a powerful tool for the detection of AFM₁.

Phosphorus adsorption behavior of industrial waste biomass-based adsorbent, esterified polyethylenimine-coated polysulfone-Escherichia coli biomass composite fibers in aqueous solution

This study sought to develop a highly efficient adsorbent material for phosphorus (P) removal via valorization of industrial Escherichia coli biomass waste. To ensure an easy and fast recovery after the sorption process, the E. coli biomass waste was immobilized into polysulfone matrix. Additionally, to improve P sorption capacity, the sorbent surface was coated with polyethylenimine (PEI) and further chemically modified. The P uptakes of the developed sorbent (decarboxylated PEI-modified polysulfone-biomass composite fiber, DC-PEI-PEF) were significantly affected by pH. Moreover, the maximum sorption capacity (q_max) of DC-PEI-PEF was estimated as 30.46 ± 1.09 mg/g at neutral pH, as determined by a Langmuir isotherm model. Furthermore, DC-PEI-PEF could reach sorption equilibrium within 5 min and exhibited reusability potential. The partition coefficient of the newly developed material (DC-PEI-PEF) was calculated as 0.387 mg/g⋅μM at 4 mg/L of initial P concentration and decreased as initial P concentrations increased. Therefore, DC-PEI-PEF could be suggested as a promising adsorbent for application in direct phosphorus removal from natural aquatic environments.

Ferrocene-Incorporated Cobalt Sulfide Nanoarchitecture for Superior Oxygen Evolution Reaction

Here, ferrocene(Fc)-incorporated cobalt sulfide (Co_x S_y ) nanostructures directly grown on carbon nanotube (CNT) or carbon fiber (CF) networks for electrochemical oxygen evolution reaction (OER) using a facile one-step solvothermal method are reported. The strong synergistic interaction between Fc-Co_x S_y nanostructures and electrically conductive CNTs results in the superior electrocatalytic activity with a very small overpotential of ≈304 mV at 10 mA cm^-2 and a low Tafel slope of 54.2 mV dec^-1 in 1 m KOH electrolyte. Furthermore, the Fc-incorporated Co_x S_y (FCoS) nanostructures are directly grown on the acid pretreated carbon fiber (ACF), and the resulting fabricated electrode delivers excellent OER performance with a low overpotential of ≈315 mV at 10 mA cm^-2 . Such superior OER catalytic activity can be attributed to 3D Fc-Co_x S_y nanoarchitectures that consist of a high concentration of vertical nanosheets with uniform distribution of nanoparticles that afford a large number of active surface areas and edge sites. Besides, the tight contact interface between ACF substrate and Fc-Co_x S_y nanostructures could effectively facilitate the electron transfer rate in the OER. This study provides valuable insights for the rational design of energy storage and conversion materials by the incorporation of other transition metal into metal sulfide/oxide nanostructures utilizing metallocene.

Near-infrared stimulated hydrogel patch for photothermal therapeutics and thermoresponsive drug delivery

Nanotechnology driven cancer theranostics hold potential as promising future clinical modalities. Currently, there is a strong emphasis on the development of combinational modalities, especially for cancer treatment. In this study, we present a topical hydrogel patch for nanomaterial-assisted photothermal therapeutics as well as for on-demand drug delivery application. The patch was derived from interpenetrating networks (IPNs) of alginate (Alg) and polyacrylamide (PAAm) in weight ratio 8:1 by free radical polymerization. The patch interiors were composed of hybrid nanostructures derived from gold nanorods (AuNRs) anchored onto polyvinylpyrrolidone (PVP) functionalized graphene oxide (PVP-nGO) to form PVP-nGO@AuNRs hybrids. Field emission scanning electron microscopy (FE-SEM) images revealed the porous nature of the hybrid hydrogel patch with an average pore size of ~28.60 ± 3.10 μm. Besides, functional characteristics of the hybrid patch, such as mechanical strength, viscoelastic and swelling behavior, were investigated. Under near-infrared (NIR) radiation exposure, the hybrid patch exhibited photothermal properties such as surface temperature rise to 75.16 ± 0.32 °C, sufficient to ablate cancer cells thermally. Besides, the heat generated in the hybrid patch could be transmitted to an underlying hydrogel (mimicking skin tissue) when stacked together without much loss. Under cyclic photothermal heating, the patch could retain its photothermal stability for four cycles. Furthermore, the hybrid patch demonstrated NIR stimulated drug release, which was evaluated using methotrexate (MTX, water-insoluble anticancer drug) and rhodamine B (RhB, water-soluble dye). Taken together, this work provides a new dimension towards the development of externally placed hydrogel patches for thermal destruction of localized solid tumors and tunable delivery of chemotherapeutic drugs at the target site.

Dopamine-derived nitrogen-doped carboxyl multiwalled carbon nanotube-modified graphite felt with improved electrochemical activity for vanadium redox flow batteries

Improving the electrochemical activity of electrodes is essential to the development of vanadium redox flow battery (VRFB). In this work, we prepared a novel electrode with the modification of nitrogen-doped carboxyl multiwalled carbon nanotubes using dopamine as an eco-friendly nitrogen source (carboxyl MWCNT@PDAt). Characterization and electrochemical measurements reveal that the synthesized carboxyl MWCNT@PDAt-modified graphite felt electrode (carboxyl MWCNT@PDAt/GF) exhibits excellent electrochemical performance toward VO²⁺/ V O 2 + reaction. Superior battery performance was obtained with the energy efficiency of 80.54% at a current density of 80 mA cm^-2. Excellent durability of the carboxyl MWCNT@PDAt/GF electrode was confirmed by long-term charge/discharge tests. The enhanced reaction kinetics of VO²⁺/ V O 2 + is ascribed to the synergetic effect of oxygen and nitrogen containing groups on graphite felt surface and the presence of nitrogen-doped carboxyl multiwalled carbon nanotubes (MWCNT). The facile approach proposed in this paper provides a new route to the fabrication of electrode with excellent performance for VRFB.

SiOC functionalization of MoS2 as a means to improve stability as sodium-ion battery anode

The development of feasible, scalable, and environmentally-safe electrode materials that provide stable cycling performance are critical for success of beyond lithium rechargeable batteries and supercapacitors. With respect to the sodium-ion battery (SIB) anodes constituting of transition metal dichalcogenides such as molybdenum disulfide (MoS₂), poor cycle stability and fast capacity degradation, due to low electronic conductivity and dissolution of chemical species in the electrolyte, hinders use of these promising layered materials as SIB anodes. Herein we report chemical functionalization in MoS₂ nanosheets with polymer-derived silicon oxycarbide or SiOC with the aim to preserve MoS₂ from dissolution in the SIB organic electrolyte, without compromising its role in sodiation and desodiation processes. Our results suggest that a MoS₂-SiOC composite electrode is effective in bringing improved cycle stability to sodium-ion cycling over neat MoS₂ even after 100 cycles.

Highly Efficient Clean Water Production from Contaminated Air with a Wide Humidity Range

The huge amount of moisture in the air is an unexplored and overlooked water resource in nature, which can be useful to solve the worldwide water shortage. However, direct water condensation from natural or even hazy air is always inefficient and inevitably contaminated by numerous impurities of dust, toxic gas, and microorganisms. In this regard, a drinkable and clean water harvester from complex contaminated air with a wide humidity range based on porous sodium polyacrylate/graphene framework (PGF), which can actively sorb moisture from common or even smoggy environments, efficiently grabs impurities, and then releases clean water with a high rejection rate of impurities under solar irradiation, is proposed. This PGF shows a superhigh equilibrium uptake of 5.20 g of water per gram of PGF at a relative humidity (RH) of 100% and 0.14 g g^-1 at a low RH of 15%. The rejection rate of impurities is up to 97% for the collected clean water. Moreover, a water harvesting system is established to produce over 25 L clean water per kilogram of PGF one day, enough to meet several people's drinking water demand. This work provides a new strategy for effective production of clean water from the atmosphere of practical significance.

Graphene quantum dot-sensitized Zn-MOFs for efficient visible-light-driven carbon dioxide reduction

A new hybrid Zn-Bim-His-1@GQD nanoparticle has been successfully developed for high selectivity of CO₂ reduction to yield CH₄.

High-Energy Flexible Supercapacitor-Synergistic Effects of Polyhydroquinone and RuO2· xH2O with Microsized, Few-Layered, Self-Supportive Exfoliated-Graphite Sheets

An effective and straightforward route for tailoring the self-supporting, exfoliated flexible graphite substrate (E-FGS) using electrochemical anodization is proposed. E-FGS has essential features of highly exfoliated, few-layered, two-dimensional graphite sheets with the size of several tens of micrometers, interconnected along the axis of the substrate surface. The novel hierarchical porous structural morphology of E-FGS enables large active sites for efficient electrolyte ion and charge transport when used as electrode material for a supercapacitor. In order to effectively utilize this promising E-FGS electrode for energy storage purpose, a ternary composite is further synthesized with pseudocapacitive polyhydroquinone (PHQ) and hydrous RuO₂ (hRO). hRO is synthesized via a sol-gel route, while electropolymerization is utilized for the electrodeposition of PHQ over E-FGS. Ultimately, the fabricated self-supporting E-FGS-based flexible supercapacitor is capable of delivering areal specific capacitance values as high as 378 mF cm^-2 at a current density of 1 mA cm^-2. Addition of the pseudocapacitive component to the E-FGS texture leads to ∼10 times increase of the electrochemical charge storage capability. The imposition of mechanical forces to this flexible supercapacitor device results in trivial changes in electrochemical properties and is still capable of retaining 91% of the initial specific capacitance after 10 000 cycles. Alongside, the fabricated symmetrical solid-state flexible device exhibited a high energy density of 8.4 μWh cm^-2. The excellent performance along with the ease of synthesis and fabrication process of the flexible solid-state supercapacitor device using PHQ/hRO/E-FGS holds promise for large-scale production.

Colloidal Nanobioconjugate with Complementary Surface Chemistry for Cellular and Subcellular Targeting

Chemically and biochemically functionalized colloidal nanoparticles with appropriate surface chemistry are essential for various biomedical applications. Although a variety of approaches are now available in making such functional nanoparticles and nanobioconjugates, the lack of complementary surface chemistry often leads to poor performance with respect to intended biomedical applications. This feature article will focus on our efforts to make colloidal nanobioconjugates with appropriate/complementary surface chemistry for better performance of a designed nanoprobe with respect to cellular and subcellular targeting applications. In particular, we emphasize polyacrylate-based coating chemistry followed by a conjugation strategy for transforming <10 nm inorganic nanoparticle to colloidal nanoprobe of 20-50 nm hydrodynamic size. We show that a colloidal nanoprobe can be chemically designed to control the cell-nanoparticle interaction, cellular endocytosis, and targeting/labeling of subcellular compartments. Further study should be directed to adapt this surface chemistry to different nanoparticles, fine tune the surface chemistry for targeting/imaging on the subcellular/molecular length scale, and develop a delivery nanocarrier for subcellular compartments.

Surface tailoring of polyacrylate-grafted graphene oxide for controlled interactions at the biointerface

The actual surface termination and lateral size of a nanomaterial is crucial in its interaction with biomolecules at the aqueous interface. Graphene oxide (GO) nanosheets have been demonstrated as promising nanoplatform for both diagnostic and therapeutic applications. To this respect, 'smart' GO nanocarriers have been obtained by the surface functionalisation with polymers sensitive, e.g., to pH, as the polyacrylate (PAA) case. In this work, hybrid GO/PAA samples prepared respectively at low (GOPAA_thin) or high (GOPAA_thick) monomer grafting ratio, were scrutinised both theoretically, by molecular dynamic calculations, and experimentally by a multitechnique approach, including spectroscopic (UV-visible, fluorescence, Raman, Attenuated-total reflectance-Fourier transformed infrared and X-ray photoelectron spectroscopies), spectrometric (time-of-flight secondary ion and electrospray ionisation mass spectrometries) and microscopic (atomic force and confocal microscopies) methods. The actual surface termination, evaluated in terms of the relative ratio between polar and dispersive groups at the surface of the GO/polymer systems, was found to correlate with the average orientation of hydrophilic/hydrophobic domains of albumin, used as model protein. Moreover, the comparison among GO, GO-PAA_thin and GO-PAA_thick in the optical response at the interface with aqueous solutions, both at acid and at physiological pH, showed that the hybrid GO-polymer platform could be suitable not only to exploit a pH-triggered drug release but also for a modulation of the GO intrinsic emission properties. Energy transfer experiments on the GO/polymer oxide/fluorescein-labelled albumin/doxorubicin assembly showed significant differences for GO and GO-PAA samples, thus demonstrating the occurrence of different electronic processes at the hybrid nano-bio-interfaces. Confocal microscopy studies of cellular uptake in neuroblastoma cells confirmed the promising potentialities of the developed nanoplatform for applications at the biointerface.

Ionic Liquid-Based Polymer Electrolytes via Surfactant-Assisted Polymerization at the Plasma-Liquid Interface

We first report an innovative method, which we refer to as interfacial liquid plasma polymerization, to chemically cross-link ionic liquids (ILs). By this method, a series of all-solid state, free-standing polymer electrolytes is successfully fabricated where ILs are used as building blocks and ethylene oxide-based surfactants are employed as an assisted-cross-linking agent. The thickness of the films is controlled by the plasma exposure time or the ratio of surfactant to ILs. The chemical structure and properties of the polymer electrolyte are characterized by scanning electron microscopy (SEM), Fourier transformation infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) spectroscopy, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), and electrochemical impedance spectroscopy (EIS). Importantly, the underlying polymerization mechanism of the cross-linked IL-based polymer electrolyte is studied to show that fluoroborate or halide anions of ILs together with the aid of a small amount of surfactants having ethylene oxide groups are necessary to form cross-linked network structures of the polymer electrolyte. The ionic conductivity of the obtained polymer electrolyte is 2.28 × 10(-3) S·cm(-1), which is a relatively high value for solid polymer electrolytes synthesized at room temperature. This study can serve as a cornerstone for developing all-solid state polymer electrolytes with promising properties for next-generation electrochemical devices.

Electrochemical probing of carbon quantum dots: not suitable for a single electrode material

We demonstrate that the easy aggregation, rapid stacking and high oxygen-functional groups of GQDs have a negative impact on the electrochemical properties. GQDs are no better than graphene as an excellent single electrode material.

Stable Ni nanoparticle-reduced graphene oxide composites for the reduction of highly toxic aqueous Cr(VI) at room temperature

Inherent properties of graphene can be experienced by integrating it with different nanomaterials to form unique composite materials. Decorating the surface of graphene sheets with nanoparticles (NPs) is one of the recent approaches taken up by scientists all over the world. This article describes a simple synthesis route to preparing stable Ni NP-reduced graphene oxide (Ni-RGO) composite material. The otherwise unstable bare Ni NPs are stabilized when embedded in the RGO sheets. This synthesized composite material has a potential application in the formic acid-induced reduction of highly toxic aqueous Cr(VI) at room temperature (25 °C). The reduction of dichromate using formic acid as a reducing agent is a well-known redox reaction. However, the rate of the reaction is very slow at room temperature, which can be enhanced very significantly in the presence of Ni-RGO by introducing an intermediate redox step with formic acid. The Ni-RGO composite material is an easy to prepare, cheap, stable, reusable material that has the potential to replace costly Pd NPs used in this context. Ni-RGO is also found to be very active in enhancing the rate of reduction of other metal ions in the presence of formic acid at room temperature.

Synthesis of nanobioconjugates with a controlled average number of biomolecules between 1 and 100 per nanoparticle and observation of multivalency dependent interaction with proteins and cells

Multivalency of nanoparticle and associated cooperative binding with biological interface is an important aspect in the development of nanoparticle based bioimaging probes. However, the preparation of such a nanobioconjugate with a controlled number of biomolecules per nanoparticle, typically between 1 and 100, is challenging. Here we report a generalized two-step bioconjugation method to prepare nanobioconjugates with a varied average number of biomolecules between 1 to 100 per nanoparticle that can be applied to different nanoparticles and biomolecules. Following this approach we have successfully synthesized quantum dot (QD) based bioconjugates with controlled average numbers of glucose or folate and found their number-dependent interaction with proteins and cells. We propose a method for exploiting the nanoparticle multivalency effect toward various biological interactions and preparing such nanobioconjugates for best performance.

Tuning nanostructure of graphene oxide/polyelectrolyte LbL assemblies by controlling pH of GO suspension to fabricate transparent and super gas barrier films

A technique of layer-by-layer (LbL) self-assembly was used to prepare transparent multilayered gas barrier films consisting of graphene oxide (GO)/branched poly(ethylenimine) (BPEI) on a poly(ethylene terephthalate) substrate. The effect of the GO suspension pH on the nanostructure and oxygen barrier properties of the GO/BPEI film was investigated. The oxygen barrier properties of the assemblies were shown to be highly dependent on the pH. It was demonstrated that the film assemblies prepared using a GO suspension with a pH of 3.5 exhibited very dense and ordered structures and delivered very low oxygen transmission rates (the lowest was <0.05 cm(3) m(-2) day(-1)). The assemblies were characterized with ultraviolet-visible spectroscopy and ellipsometry to identify the film growth mechanism, and the result indicated a linear growth behavior. To analyze the nanostructure of the films, atomic force microscopy, transmission electronic microscopy, and grazing incidence wide-angle X-ray diffraction were used.

Optical bifunctionality of europium-complexed luminescent graphene nanosheets

Graphene is an intriguing two-dimensional material, which could be modified for achieving tunable properties with many applications. Photoluminescence of graphene due to plasmonic emission is well-known, however, attempts to develop strong luminescent graphene have been difficult. Synthesis of a graphene-based material with a dual optical functionality, namely quenching the fluorescence of organic dyes while maintaining its own self-luminescence, is an interesting and challenging proposition. Here, we demonstrate this optical bifunctionality in a lattice-modified luminescent graphene, where europium(III) cations are complexed with graphene through oxygen functionalities. After excitation at 314 nm, a hypersensitive red emission is observed at 614 and 618 nm showing the complexation of europium(III) with graphene. We demonstrate dual functionality of this graphene by the quenching of luminescence of Rhodamine-B while displaying its own hypersensitive red emission. The decay lifetime observed through the time-resolved spectroscopy confirms its potential for applications in biosensing as well as optoelectronics.

Peptide-functionalized colloidal graphene via interdigited bilayer coating and fluorescence turn-on detection of enzyme

Synthesis of colloidal functional graphene is challenging because graphene is water-insoluble and its relatively inert surface made the functionalization a difficult task. Here we report interdigited bilayer type coating that provide both colloidal stability and functionalization option for graphene. Colloidal graphene oxide is first converted into interdigited bilayer coated graphene oxide and next they are transformed into colloidal graphene by hydrazine reduction. These coated graphenes can be further transformed into colloidal functional graphene using covalent conjugation chemistry. Functional graphene has been synthesized for optical detection of enzyme where a fluorescent dye is covalently linked through a peptide so that the dye fluorescence is quenched by graphene but switches on once enzymes cleave the peptide bond. The interdigited bilayer coating reported here is unique as it provides coating thickness <3 nm, offering optically responsive graphene-fluorophore substrate with high colloidal stability.