Spherical Attapulgite/Silica Aerogels Fabricated via Different Drying Methods with Excellent Adsorption Performance

Dye wastewater has caused great harm to the environment, which is an urgent problem to be solved. As typical three-dimensional porous materials, aerogels have attracted great interest in dye wastewater treatment. In this work, spherical attapulgite/silica (ATP/SiO₂) gels were initially prepared by easily scalable sol-gel dripping methods and then dried to aerogels with three drying techniques, namely, supercritical CO₂ drying (SCD), freeze-drying (FD), and ambient pressure drying (APD). The effect of the drying techniques and heat-treated temperature on the physical characteristic, morphological properties, microstructure, and chemical structure of the spherical ATP/SiO₂ aerogels were investigated. The macroscopic morphology of the spherical ATP/SiO₂ aerogels was homogeneous and integrated without local cracking. The average pore diameter and specific surface area of the spherical ATP/SiO₂ aerogels prepared by the three drying techniques were in the range of 6.8-8.6 nm and 218.5-267.4 m²/g, respectively. The heat treatment temperature had a significant effect on the pore structure and the wetting properties of the aerogels. The 600 °C heat-treated aerogels were subjected to adsorption tests in methylene blue (MB) solution (60 mg/g, 100 mL), which exhibited a great adsorption capacity of 102.50 mg/g. Therefore, the resulting spherical ATP/SiO₂ aerogels possessed multipath preparation and exhibited an efficient adsorption performance, with the potential to be applied as an adsorbent for dye wastewater.

Comparison of Mannose, Ethylene Glycol, and Methoxy-Terminated Diluents on Specificity and Selectivity of Electrochemical Peptide-Based Sensors

We report the synthesis and application of three new antifouling diluents for the fabrication of an E-PB HIV sensor. Among the three thiolated antifouling diluents used in this study, the methoxy-terminated diluent (C6-MEG) is the most effective in alleviating both nonspecific binding and adsorption of matrix contaminants onto the sensor surface, especially when compared to the mannose- (C6-MAN) and ethylene-glycol-terminated (C6-EG) diluents. The sensor fabricated with C6-MEG has a specificity factor (∼13.5) substantially higher than the sensor passivated with only 6-mercapto-1-hexanol (∼1.5). It is functional even when employed directly in 25% serum, an achievement that has not been observed with this class of E-PB sensors. More importantly, incorporation of these antifouling diluents has negligible impact on other important sensor properties such as sensitivity and binding kinetics. This sensor passivation strategy is versatile and can potentially be used with other E-PB sensors, as well as surface-based sensors that utilize thiol-gold self-assembled monolayer chemistry.

Use of thiolated oligonucleotides as anti-fouling diluents in electrochemical peptide-based sensors

We incorporated short thiolated oligonucleotides as passivating diluents in the fabrication of electrochemical peptide-based (E-PB) sensors, with the goal of creating a negatively charged layer capable of resisting non-specific adsorption of matrix contaminants. The E-PB HIV sensors fabricated using these diluents were found to be more specific and selective, while retaining attributes similar to the sensor fabricated without these diluents. Overall, these results highlight the advantages of using oligonucleotides as anti-fouling diluents in self-assembled monolayer-based sensors.

Methylene blue-mediated electrocatalytic detection of hexavalent chromium

We report, for the first time, the design and fabrication of an electrochemical ion (E-ION) sensor for highly specific detection of hexavalent chromium (Cr(VI)). Unlike previously developed electrochemical Cr(VI) sensors, the sensing mechanism relies on the previously unexplored electrocatalytic reaction between Cr(VI) and surface-immobilized methylene blue (MB). The sensor is sensitive, specific, and selective enough to be used in a synthetic aquifer sample. Like many sensors of this class, it is also reagentless, reusable, and compatible with gold-plated screen-printed carbon electrodes. Despite the difference in the sensing mechanism, this E-ION Cr(VI) sensor possesses attributes similar to other MB-based electrochemical sensors, sensors with potential for real world applications.

Reversible control over molecular recognition in surface-bound photoswitchable hydrogen-bonding receptors: towards read-write-erase molecular printboards

The synthesis of an anthracene-bearing photoactive barbituric acid receptor and its subsequent grafting onto azide-terminated alkanethiol/Au self-assembled monolayers by using an Cu(I) -catalyzed azide-alkyne reaction is reported. Monolayer characterization using contact-angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open-to-closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization-modulated IR reflection-absorption spectroscopy indicates that photochemical closure and thermal opening of the surface-bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface-bound receptor was characterized by using force spectroscopy with a barbituric-acid-modified atomic force microscope tip.