Solid-State Electrochemistry and Solid Oxide Fuel Cells: Status and Future Prospects

Solid-state electrochemistry (SSE) is an interdisciplinary field bridging electrochemistry and solid-state ionics and deals primarily with the properties of solids that conduct ions in the case of ionic conducting solid electrolytes and electrons and/or electron holes in the case of mixed ionic and electronic conducting materials. However, in solid-state devices such as solid oxide fuel cells (SOFCs), there are unique electrochemical features due to the high operating temperature (600–1 000 °C) and solid electrolytes and electrodes. The solid-to-solid contact at the electrode/electrolyte interface is one of the most distinguished features of SOFCs and is one of the fundamental reasons for the occurance of most importance phenomena such as shift of the equipotential lines, the constriction effect, polarization-induced interface formation, etc. in SOFCs. The restriction in placing the reference electrode in solid electrolyte cells further complicates the SSE in SOFCs. In addition, the migration species at the solid electrode/electrolyte interface is oxygen ions, while in the case of the liquid electrolyte system, the migration species is electrons. The increased knowledge and understanding of SSE phenomena have guided the development of SOFC technologies in the last 30–40 years, but thus far, no up-to-date reviews on this important topic have appeared. The purpose of the current article is to review and update the progress and achievements in the SSE in SOFCs, largely based on the author’s past few decades of research and understanding in the field, and to serve as an introduction to the basics of the SSE in solid electrolyte devices such as SOFCs.

Graphical abstract

Oxygen activation on Ba-containing perovskite materials

Oxygen activation, including oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), is at the heart of many important energy conversion processes. However, the activation mechanism of Ba-containing perovskite materials is still ambiguous, because of the complex four-electron transfer process on the gas-solid interfaces. Here, we directly observe that BaO and BaO₂ segregated on Ba-containing material surface participate in the oxygen activation process via the formation and decomposition of BaO₂. Tens of times of increase in catalytic activities was achieved by introducing barium oxides in the traditional perovskite and inert Au electrodes, indicating that barium oxides are critical for oxygen activation. We find that BaO and BaO₂ are more active than the B-site of perovskite for ORR and OER, respectively, and closely related to the high activity of Ba-containing perovskite.

Solid-Solid Interfaces in Protonic Ceramic Devices: A Critical Review

The literature concerning protonic ceramic devices is critically reviewed focusing the reader's attention on the structure, composition, and phenomena taking place at solid-solid interfaces. These interfaces play a crucial role in the overall device performance, and the relevance of understanding the phenomena taking place at the interfaces for the further improvement of electrochemical protonic ceramic devices is therefore stressed. The grain boundaries and heterostructures in electrolytic membranes, the electrode-electrolyte contacts, and the interfaces within composite anode and cathode materials are all considered, with specific concern to advanced techniques of characterization and to computational modeling by ab initio approaches. An outlook about future developments and improvements highlights the necessity of a deeper insight into the advanced analysis of what happens at the solid-solid interfaces and of in situ/operando investigations that are presently sporadic in the literature on protonic ceramic devices.

Surface Segregation in Solid Oxide Cell Oxygen Electrodes: Phenomena, Mitigation Strategies and Electrochemical Properties

Abstract

Solid oxide cells (SOCs) are highly efficient and environmentally benign devices that can be used to store renewable electrical energy in the form of fuels such as hydrogen in the solid oxide electrolysis cell mode and regenerate electrical power using stored fuels in the solid oxide fuel cell mode. Despite this, insufficient long-term durability over 5–10 years in terms of lifespan remains a critical issue in the development of reliable SOC technologies in which the surface segregation of cations, particularly strontium (Sr) on oxygen electrodes, plays a critical role in the surface chemistry of oxygen electrodes and is integral to the overall performance and durability of SOCs. Due to this, this review will provide a critical overview of the surface segregation phenomenon, including influential factors, driving forces, reactivity with volatile impurities such as chromium, boron, sulphur and carbon dioxide, interactions at electrode/electrolyte interfaces and influences on the electrochemical performance and stability of SOCs with an emphasis on Sr segregation in widely investigated (La,Sr)MnO3 and (La,Sr)(Co,Fe)O3−δ. In addition, this review will present strategies for the mitigation of Sr surface segregation.

Graphic Abstract

Study on Ca Segregation toward an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate

Segregation is a crucial phenomenon, which has to be considered in functional material design. Segregation processes in perovskite oxides have been the subject of ongoing scientific interest, since they can lead to a modification of properties and a loss of functionality. Many studies in oxide thin films have focused on segregation toward the surface using a variety of surface-sensitive analysis techniques. In contrast, here we report a Ca segregation toward an in-plane compressively strained heterostructure interface in a Ca- and Mn-codoped bismuth ferrite film. We are using advanced transmission electron microscopy techniques, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. Ca segregation is found to trigger atomic and electronic structure changes at the interface. This includes the reduction of the interface strain according to the Ca concentration gradient, interplanar spacing variations, and oxygen vacancies at the interface. The experimental results are supported by DFT calculations, which explore two segregation scenarios, i.e., one without oxygen vacancies and Fe oxidation from 3+ to 4+ and one with vacancies for charge compensation. Comparison with electron energy loss spectroscopy (EELS) measurements confirms the second segregation scenario with vacancy formation. The findings contribute to the understanding of segregation and indicate promising effects of a Ca-rich buffer layer in this heterostructure system.

Electrochemical Polarization Dependence of the Elastic and Electrostatic Driving Forces to Aliovalent Dopant Segregation on LaMnO3

Segregation of aliovalent dopant cations is a common degradation pathway on perovskite oxide surfaces in energy conversion and catalysis applications. Here we focus on resolving quantitatively how dopant segregation is affected by oxygen chemical potential, which varies over a wide range in electrochemical and thermochemical energy conversion reactions. We employ electrochemical polarization to tune the oxygen chemical potential over many orders of magnitude. Altering the effective oxygen chemical potential causes the oxygen nonstoichiometry to change in the electrode. This then influences the mechanisms underlying the segregation of aliovalent dopants. These mechanisms are (i) the formation of oxygen vacancies that couples to the electrostatic energy of the dopant in the perovskite lattice and (ii) the elastic energy of the dopant due to cation size mismatch, which also promotes the reaction of the dopant with O₂ from the gas phase. The present study resolves these two contributions over a wide range of effective oxygen pressures. Ca-, Sr-, and Ba-doped LaMnO₃ are selected as model systems, where the dopants have the same charge but different ionic sizes. We found that there is a transition between the electrostatically and elastically dominated segregation regimes, and the transition shifted to a lower oxygen pressure with increasing cation size. This behavior is consistent with the results of our ab initio thermodynamics calculations. The present study provides quantitative insights into how the elastic energy and the electrostatic energy determine the extent of segregation for a given overpotential and atmosphere relevant to the operating conditions of perovskite oxides in energy conversion applications.

Spatially Resolved XPS Characterization of Electrochemical Surfaces

Synchrotron-based scanning photoelectron microscopy (SPEM) has opened unique opportunities for exploiting processes occurring at surfaces and interfaces, which control the properties of materials for electrochemical devices, where issues of chemical and morphological complexity at microscopic length scales should be faced and understood. The present article aims to demonstrate the present capabilities of SPEM to explore the surface composition of micro- and nano-structured materials, focusing on cases relevant to electrochemical technologies. We report and discuss a selection of recent results about three different systems, targeting hot topics in the fields of electrochemical energy storage and electrochemical fabrication: (i) an in-depth analysis of Ag-In electrodeposited alloys exhibiting dynamic pattern formation, (ii) the analysis of electrochemical processes at the electrodes of a self-driven solid oxide fuel cell and (iii) an operando characterization of a single-chamber solid oxide fuel cell. The last example has been performed at near-ambient pressure conditions using a unique specially designed setup which extends the traditional capabilities of scanning photoemission microscopes in the ultra-high and high-vacuum regimes to operating conditions that are closer to realistic ones, contributing to overcome the so-called “pressure gap”.

Factors controlling surface oxygen exchange in oxides

Reducing the working temperature of solid oxide fuel cells is critical to their increased commercialization but is inhibited by the slow oxygen exchange kinetics at the cathode, which limits the overall rate of the oxygen reduction reaction. We use ab initio methods to develop a quantitative elementary reaction model of oxygen exchange in a representative cathode material, La_0.5Sr_0.5CoO_3-δ, and predict that under operating conditions the rate-limiting step for oxygen incorporation from O₂ gas on the stable, (001)-SrO surface is lateral (surface) diffusion of O-adatoms and oxygen surface vacancies. We predict that a high vacancy concentration on the metastable CoO₂ termination enables a vacancy-assisted O₂ dissociation that is 10²-10³ times faster than the rate limiting step on the Sr-rich (La,Sr)O termination. This result implies that dramatically enhanced oxygen exchange performance could potentially be obtained by suppressing the (La,Sr)O termination and stabilizing highly active CoO₂ termination.

Surface Cation Segregation and Chromium Deposition on the Double-Perovskite Oxide PrBaCo2O5+δ

The surface chemistry and the Cr tolerance ability of oxygen electrodes play a vital role in the performance and long-term stability of solid oxide cells (SOCs). In this paper, the surface cation segregations on the double-perovskite oxide PrBaCo₂O_5+δ (PBCO) and its relationship with Cr deposition are reported. During high-temperature annealing in an O₂ atmosphere, the elements Ba and Co diffuse out of the lattice and form many BaO and Co₃O₄ precipitates on the surface, mainly located at grain boundaries. In the presence of volatile Cr species, the observation of BaCrO₄, but not CoCr₂O₄, on a segregated PBCO surface reveals that the Cr deposition preferentially takes place on segregated BaO rather than on Co₃O₄ precipitates. Our results show that segregated BaO precipitates are very active toward Cr vapor and PBCO is not a Cr-tolerant oxygen electrode for SOCs operating at high temperatures, despite its superior electrochemical performance.

Controlling cation segregation in perovskite-based electrodes for high electro-catalytic activity and durability

Solid oxide cell (SOC) based energy conversion systems have the potential to become the cleanest and most efficient systems for reversible conversion between electricity and chemical fuels due to their high efficiency, low emission, and excellent fuel flexibility. Broad implementation of this technology is however hindered by the lack of high-performance electrode materials. While many perovskite-based materials have shown remarkable promise as electrodes for SOCs, cation enrichment or segregation near the surface or interfaces is often observed, which greatly impacts not only electrode kinetics but also their durability and operational lifespan. Since the chemical and structural variations associated with surface enrichment or segregation are typically confined to the nanoscale, advanced experimental and computational tools are required to probe the detailed composition, structure, and nanostructure of these near-surface regions in real time with high spatial and temporal resolutions. In this review article, an overview of the recent progress made in this area is presented, highlighting the thermodynamic driving forces, kinetics, and various configurations of surface enrichment and segregation in several widely studied perovskite-based material systems. A profound understanding of the correlation between the surface nanostructure and the electro-catalytic activity and stability of the electrodes is then emphasized, which is vital to achieving the rational design of more efficient SOC electrode materials with excellent durability. Furthermore, the methodology and mechanistic understanding of the surface processes are applicable to other materials systems in a wide range of applications, including thermo-chemical photo-assisted splitting of H₂O/CO₂ and metal-air batteries.

Insights into the Surface Reactivity of Cermet and Perovskite Electrodes in Oxidizing, Reducing, and Humid Environments

Understanding the surface chemistry of electrode materials under gas environments is important in order to control their performance during electrochemical and catalytic applications. This work compares the surface reactivity of Ni/YSZ and La_0.75Sr_0.25Cr_0.9Fe_0.1O₃, which are commonly used types of electrodes in solid oxide electrochemical devices. In situ synchrotron-based near-ambient pressure photoemission and absorption spectroscopy experiments, assisted by theoretical spectral simulations and combined with microscopy and electrochemical measurements, are used to monitor the effect of the gas atmosphere on the chemical state, the morphology, and the electrical conductivity of the electrodes. It is shown that the surface of both electrode types readjusts fast to the reactive gas atmosphere and their surface composition is notably modified. In the case of Ni/YSZ, this is followed by evident changes in the oxidation state of nickel, while for La_0.75Sr_0.25Cr_0.9Fe_0.1O₃, a fine adjustment of the Cr valence and strong Sr segregation is observed. An important difference between the two electrodes is their capacity to maintain adsorbed hydroxyl groups on their surface, which is expected to be critical for the electrocatalytic properties of the materials. The insight gained from the surface analysis may serve as a paradigm for understanding the effect of the gas environment on the electrochemical performance and the electrical conductivity of the electrodes.

High Redox Capacity of Al-Doped La1-x Srx MnO3-δ Perovskites for Splitting CO2 and H2 O at Mn-Enriched Surfaces

Perovskites are attractive candidates for the solar-driven thermochemical redox splitting of CO₂ and H₂ O into CO and H₂ (syngas) and O₂ . This work investigates the surface activity of La_1-x Sr_x Mn_1-y Al_y O_3-δ (0≤x≤1, 0≤y≤1) and La_0.6 Ca_0.4 Mn_0.6 Al_0.4 O_3-δ . At 1623 K and 15 mbar O₂ , the oxygen non-stoichiometry of La_0.2 Sr_0.8 Mn_0.8 Al_0.2 O_3-δ increases with the strontium content and reaches a maximum of δ=0.351. X-ray photoelectron spectroscopy analysis indicates that manganese is the only redox-active metal at the surface. All La_1-x Sr_x Mn_1-y Al_y O_3-δ compositions exhibit surfaces enriched in manganese and depleted in strontium. We discuss how these compositional differences of the surface from the bulk lead to the beneficially higher reduction extents and lower strontium carbonate concentrations at the aluminum-doped surfaces. Using first principles calculations, we validate the experimental reduction trends and elucidate the mechanism of the partial electronic charge redistribution upon perovskite reduction.

Polarization-Induced Interface and Sr Segregation of in Situ Assembled La0.6Sr0.4Co0.2Fe0.8O3-δ Electrodes on Y2O3-ZrO2 Electrolyte of Solid Oxide Fuel Cells

Application of cobaltite-based electrodes such as La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF) on Y₂O₃-ZrO₂ (YSZ) electrolyte in solid oxide fuel cells (SOFCs) generally requires the use of a doped ceria barrier layer to prevent the interaction between LSCF and YSZ during sintering at high temperatures. In this paper, we report for the first time an in situ assembly approach to directly incorporate LSCF cathode to YSZ electrolyte without the use of a doped ceria barrier layer and without presintering at high temperatures. A Ni-YSZ anode-supported YSZ electrolyte cell with an in situ assembled LSCF electrode exhibits a peak power density of 1.72 W cm^-2 at 750 °C. However, the cell performance degrades significantly at 500 mAcm^-2 and 750 °C. The results indicate that cathodic polarization not only induces the formation of the interface but also accelerates the Sr segregation. The segregated Sr migrates to the LSCF electrode/YSZ electrolyte surface and forms an SrO layer. Using a Sr-free LaCoO_3-δ composite cathode overcomes the Sr segregation problem, showing an excellent peak power density of 1.2 Wcm^-2 and good stability at 750 °C for over 100 h. The present study shows that cobaltite-based perovskites can be directly used on YSZ-based electrolyte via the in situ assembly providing an effective means to advance the application of highly active mixed ionic/electronic conducting cathodes to YSZ electrolyte-based SOFCs.

Electrochemically Driven Deactivation and Recovery in PrBaCo2 O5+δ Oxygen Electrodes for Reversible Solid Oxide Fuel Cells

The understanding of surface chemistry changes on oxygen electrodes is critical for the development of reversible solid oxide fuel cell (RSOFC). Here, we report for the first time that the electrochemical potentials can drastically affect the surface composition and hence the electrochemical activity and stability of PrBaCo2 O5+δ (PBCO) electrodes. Anodic polarization degrades the activity of the PBCO electrode, whereas the cathodic bias could recover its performance. Alternating anodic/cathodic polarization for 180 h confirms this behavior. Microstructure and chemical analysis clearly show that anodic bias leads to the accumulation and segregation of insulating nanosized BaO on the electrode surface, whereas cathodic polarization depletes the surface species. Therefore, a mechanism based on the segregation and incorporation of BaO species under electrochemical potentials is considered to be responsible for the observed deactivation and recovery process, respectively.

Catalytic Activity and Stability of Oxides: The Role of Near-Surface Atomic Structures and Compositions

Electrocatalysts play an important role in catalyzing the kinetics for oxygen reduction and oxygen evolution reactions for many air-based energy storage and conversion devices, such as metal-air batteries and fuel cells. Although noble metals have been extensively used as electrocatalysts, their limited natural abundance and high costs have motivated the search for more cost-effective catalysts. Oxides are suitable candidates since they are relatively inexpensive and have shown reasonably high activity for various electrochemical reactions. However, a lack of fundamental understanding of the reaction mechanisms has been a major hurdle toward improving electrocatalytic activity. Detailed studies of the oxide surface atomic structure and chemistry (e.g., cation migration) can provide much needed insights for the design of highly efficient and stable oxide electrocatalysts. In this Account, we focus on recent advances in characterizing strontium (Sr) cation segregation and enrichment near the surface of Sr-substituted perovskite oxides under different operating conditions (e.g., high temperature, applied potential), as well as their influence on the surface oxygen exchange kinetics at elevated temperatures. We contrast Sr segregation, which is associated with Sr redistribution in the crystal lattice near the surface, with Sr enrichment, which involves Sr redistribution via the formation of secondary phases. The newly developed coherent Bragg rod analysis (COBRA) and energy-modulated differential COBRA are uniquely powerful ways of providing information about surface and interfacial cation segregation at the atomic scale for these thin film electrocatalysts. In situ ambient pressure X-ray photoelectron spectroscopy (APXPS) studies under electrochemical operating conditions give additional insights into cation migration. Direct COBRA and APXPS evidence for surface Sr segregation was found for La1-xSrxCoO3-δ and (La1-ySry)2CoO4±δ/La1-xSrxCoO3-δ oxide thin films, and the physical origin of segregation is discussed in comparison with (La1-ySry)2CoO4±δ/La1-xSrxCo0.2Fe0.8O3-δ. Sr enrichment in many electrocatalysts, such as La1-xSrxMO3-δ (M = Cr, Co, Mn, or Co and Fe) and Sm1-xSrxCoO3, has been probed using alternative techniques, including low energy ion scattering, secondary ion mass spectrometry, and X-ray fluorescence-based methods for depth-dependent, element-specific analysis. We highlight a strong connection between cation segregation and electrocatalytic properties, because cation segregation enhances oxygen transport and surface oxygen exchange kinetics. On the other hand, the formation of cation-enriched secondary phases can lead to the blocking of active sites, inhibiting oxygen exchange. With help from density functional theory, the links between cation migration, catalyst stability, and catalytic activity are provided, and the oxygen p-band center relative to the Fermi level can be identified as an activity descriptor. Based on these findings, we discuss strategies to increase a catalyst's activity while maintaining stability to design efficient, cost-effective electrocatalysts.

Suppressing cation segregation on lanthanum-based perovskite oxides to enhance the stability of solid oxide fuel cell cathodes

Relieving the elastic interaction, which is a key origin of dopant segregation on the surface of LaBO₃-type perovskites, by using the proper A- and B-site cations is a way to suppress the dopant segregation which often degrades SOFC performance.

Oxygen sorption and desorption properties of selected lanthanum manganites and lanthanum ferrite manganites

Temperature-programmed desorption (TPD) with a carrier gas was used to study the oxygen sorption and desorption properties of oxidation catalysts and solid-oxide fuel cell (SOFC) cathode materials (La(0.85) Sr(0.15)0.95 MnO(3+δ) (LSM) and La(0.60) Sr(0.40) Fe(0.80) Mn(0.20) O(3-δ) (LSFM). The powders were characterized by X-ray diffractometry, atomic force microscopy (AFM), and BET surface adsorption. Sorbed oxygen could be distinguished from oxygen originating from stoichiometry changes. The results indicated that there is one main site for oxygen sorption/desorption. The amount of sorbed oxygen was monitored over time at different temperatures. Furthermore, through data analysis it was shown that the desorption peak associated with oxygen sorption is described well by second-order desorption kinetics. This indicates that oxygen molecules dissociate upon adsorption and that the rate-determining step for the desorption reaction is a recombination of monatomic oxygen. Typical problems with re-adsorption in this kind of TPD setup were revealed to be insignificant by using simulations. Finally, different key parameters of sorption and desorption were determined, such as desorption activation energies, density of sorption sites, and adsorption and desorption reaction order.

Enhancing electrochemical water-splitting kinetics by polarization-driven formation of near-surface iron(0): an in situ XPS study on perovskite-type electrodes

In the search for optimized cathode materials for high-temperature electrolysis, mixed conducting oxides are highly promising candidates. This study deals with fundamentally novel insights into the relation between surface chemistry and electrocatalytic activity of lanthanum ferrite based electrolysis cathodes. For this means, near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and impedance spectroscopy experiments were performed simultaneously on electrochemically polarized La0.6 Sr0.4 FeO3-δ (LSF) thin film electrodes. Under cathodic polarization the formation of Fe(0) on the LSF surface could be observed, which was accompanied by a strong improvement of the electrochemical water splitting activity of the electrodes. This correlation suggests a fundamentally different water splitting mechanism in presence of the metallic iron species and may open novel paths in the search for electrodes with increased water splitting activity.

Chromium deposition and poisoning of La0.8Sr0.2MnO3 oxygen electrodes of solid oxide electrolysis cells

The effect of the presence of an Fe–Cr alloy metallic interconnect on the performance and stability of La_0.8Sr_0.2MnO₃ (LSM) oxygen electrodes is studied for the first time under solid oxide electrolysis cell (SOEC) operating conditions at 800 °C. The presence of the Fe–Cr interconnect accelerates the degradation and delamination processes of the LSM oxygen electrodes. The disintegration of LSM particles and the formation of nanoparticles at the electrode/electrolyte interface are much faster as compared to that in the absence of the interconnect. Cr deposition occurs in the bulk of the LSM oxygen electrode with a high intensity on the YSZ electrolyte surface and on the LSM electrode inner surface close to the electrode/electrolyte interface. SIMS, GI-XRD, EDS and XPS analyses clearly identify the deposition and formation of chromium oxides and strontium chromate on both the electrolyte surface and electrode inner surface. The anodic polarization promotes the surface segregation of SrO and depresses the generation of manganese species such as Mn²⁺. This is evidently supported by the observation of the deposition of SrCrO₄, rather than (Cr,Mn)₃O₄ spinels as in the case under the operating conditions of solid oxide fuel cells. The present results demonstrate that the Cr deposition is essentially a chemical process, initiated by the nucleation and grain growth reaction between the gaseous Cr species and segregated SrO on LSM oxygen electrodes under SOEC operating conditions.

Dynamic behavior of impurities and native components in model LSM microelectrodes on YSZ

Energy conversion materials exhibit complex dynamic behavior when subjected to elevated temperatures and polarization.

Recent progress on synchrotron-based in-situ soft X-ray spectroscopy for energy materials

Soft X-ray spectroscopy (SXS) techniques such as photoelectron spectroscopy, soft X-ray absorption spectroscopy and X-ray emission spectroscopy are efficient and direct tools to probe electronic structures of materials. Traditionally, these surface sensitive soft X-ray techniques that detect electrons or photons require high vacuum to operate. Many recent in situ instrument developments of these techniques have overcome this vacuum barrier. One can now study many materials and model devices under near ambient, semi-realistic, and operando conditions. Further developments of integrating the realistic sample environments with efficient and high resolution detection methods, particularly at the high brightness synchrotron light sources, are making SXS an important tool for the energy research community. In this progress report, we briefly describe the basic concept of several SXS techniques and discuss recent development of SXS instruments. We then present several recent studies, mostly in situ SXS experiments, on energy materials and devices. Using these studies, we would like to highlight that the integration of SXS and in situ environments can provide in-depth insight of material's functionality and help researchers in new energy material developments. The remaining challenges and critical research directions are discussed at the end.

Chromium deposition and poisoning at La0.6Sr0.4Co0.2Fe0.8O(3-δ) oxygen electrodes of solid oxide electrolysis cells

The degradation of solid oxide electrolysis cells (SOECs) is an issue of both scientific and technical importance. In this study, chromium deposition and poisoning at the La0.6Sr0.4Co0.2Fe0.8O(3-δ) (LSCF) anode or the oxygen electrode of SOECs are studied for the first time under a current density of 200 mA cm(-2) at 900 and 800 °C. After polarization in the presence of the Fe-Cr interconnect at 900 °C for 20 h, electrode polarization resistance and overpotential of the O2 evolution reaction (OER) on the LSCF electrode are 0.413 Ω cm(-2) and 127 mV, respectively, which is nearly 7 and 18 times the initial values of the electrode before the polarization. Significant performance degradation was also observed for the reaction at 800 °C in the presence of the Fe-Cr alloy. XRD and XPS analyses clearly identified the deposition of SrCrO4, CrO2.5 and Cr2O3 phases on the surface of LSCF oxygen electrodes and their formation is closely related to the increased segregation of the SrO species under anodic polarization conditions. Sr segregation leads to Sr deficiency at the A-site, thus deteriorating the electrocatalytic activity of the LSCF oxygen electrodes for OER. The results indicate that Cr deposition is essentially a chemical reaction and is initiated by the nucleation reaction between the gaseous Cr species and segregated SrO on the surface region of the LSCF oxygen electrode.

A composite cathode based on scandium doped titanate with enhanced electrocatalytic activity towards direct carbon dioxide electrolysis

The cathode with scandium-doped titanate remarkably improves the catalytic activity for carbon dioxide electrolysis in an oxide-ion-conducting solid oxide electrolyser.

Room temperature redox reaction by oxide ion migration at carbon/Gd-doped CeO2 heterointerface probed by an in situ hard x-ray photoemission and soft x-ray absorption spectroscopies

In situ hard x-ray photoemission spectroscopy (HX-PES) and soft x-ray absorption spectroscopy (SX-XAS) have been employed to investigate a local redox reaction at the carbon/Gd-doped CeO2 (GDC) thin film heterointerface under applied dc bias. In HX-PES, Ce3d and O1s core levels show a parallel chemical shift as large as 3.2 eV, corresponding to the redox window where ionic conductivity is predominant. The window width is equal to the energy gap between donor and acceptor levels of the GDC electrolyte. The Ce M-edge SX-XAS spectra also show a considerable increase of Ce3+ satellite peak intensity, corresponding to electrochemical reduction by oxide ion migration. In addition to the reversible redox reaction, two distinct phenomena by the electrochemical transport of oxide ions are observed as an irreversible reduction of the entire oxide film by O2 evolution from the GDC film to the gas phase, as well as a vigorous precipitation of oxygen gas at the bottom electrode to lift off the GDC film. These in situ spectroscopic observations describe well the electrochemical polarization behavior of a metal/GDC/metal capacitor-like two-electrode cell at room temperature.

Solid State Ionics: from Michael Faraday to green energy-the European dimension

Solid State Ionics has its roots essentially in Europe. First foundations were laid by Michael Faraday who discovered the solid electrolytes Ag2S and PbF2 and coined terms such as cation and anion, electrode and electrolyte. In the 19th and early 20th centuries, the main lines of development toward Solid State Ionics, pursued in Europe, concerned the linear laws of transport, structural analysis, disorder and entropy and the electrochemical storage and conversion of energy. Fundamental contributions were then made by Walther Nernst, who derived the Nernst equation and detected ionic conduction in heterovalently doped zirconia, which he utilized in his Nernst lamp. Another big step forward was the discovery of the extraordinary properties of alpha silver iodide in 1914. In the late 1920s and early 1930s, the concept of point defects was established by Yakov Il'ich Frenkel, Walter Schottky and Carl Wagner, including the development of point-defect thermodynamics by Schottky and Wagner. In terms of point defects, ionic (and electronic) transport in ionic crystals became easy to visualize. In an 'evolving scheme of materials science', point disorder precedes structural disorder, as displayed by the AgI-type solid electrolytes (and other ionic crystals), by ion-conducting glasses, polymer electrolytes and nano-composites. During the last few decades, much progress has been made in finding and investigating novel solid electrolytes and in using them for the preservation of our environment, in particular in advanced solid state battery systems, fuel cells and sensors. Since 1972, international conferences have been held in the field of Solid State Ionics, and the International Society for Solid State Ionics was founded at one of them, held at Garmisch-Partenkirchen, Germany, in 1987.

Improved controlled atmosphere high temperature scanning probe microscope

To locally access electrochemical active surfaces and interfaces in operando at the sub-micron scale at high temperatures in a reactive gas atmosphere is of great importance to understand the basic mechanisms in new functional materials, for instance, for energy technologies, such as solid oxide fuel cells and electrolyzer cells. Here, we report on advanced improvements of our original controlled atmosphere high temperature scanning probe microscope, CAHT-SPM. The new microscope can employ a broad range of the scanning probe techniques including tapping mode, scanning tunneling microscopy, scanning tunneling spectroscopy, conductive atomic force microscopy, and Kelvin probe force microscopy. The temperature of the sample can be as high as 850 °C. Both reducing and oxidizing gases such as oxygen, hydrogen, and nitrogen can be added in the sample chamber and the oxygen partial pressure (pO2) is monitored by an oxygen sensor. We present here some examples of its capabilities demonstrated by high temperature topography with simultaneously ac electrical conductance measurements during atmosphere changes, electrochemical impedance spectroscopy at various temperatures, and measurements of the surface potential. The improved CAHT-SPM, therefore, holds a great potential for local sub-micron analysis of high-temperature and gas induced changes of a wide range of materials.