Towards an integrated optical single aerosol particle lab

Optical trapping of mesoscale particles and atoms in hollow-core optical fibers: principle and applications

Hollow-core fiber (HCF) is a special optical waveguide type that can guide light in the air or liquid core surrounded by properly designed cladding structures. The guiding modes of the fiber can generate sufficient optical gradient forces to balance the gravity of the particles or confine the atom clouds, forming a stable optical trap in the hollow core. The levitated objects can be propelled over the fiber length along the beam axis through an imbalance of the optical scattering forces or by forming an optical lattice by the counter-propagating beams. The ability to overcome the diffraction of the laser beam in HCF can significantly increase the range of the optical manipulation compared with standard free-space optical tweezers, opening up vast ranges of applications that require long-distance optical control. Since the first demonstration of optical trapping in HCF, hollow-core-fiber-based optical trap (HCF-OT) has become an essential branch of optical tweezer that draws intense research interests. Fast progress on the fundamental principle and applied aspects of HCF-OT has been visible over the past two decades. In recent years, significant milestones in reducing the propagation loss of HCF have been achieved, making HCF an attractive topic in the field of optics and photonics. This further promotes the research and applications of HCF-OT. This review starts from the mechanism of light guidance of HCF, mainly focusing on the issues related to the optical trap in the hollow core. The basic principles and key features of HCF-OT, from optical levitation to manipulation and the detection of macroscopic particles and atoms, are summarized in detail. The key applications of HCF-OT, the challenges and future directions of the technique are also discussed.

Optical manipulation for studies of collisional dynamics of micron-sized droplets under gravity

A new experimental technique for creating and imaging collisions of micron-sized droplets settling under gravity is presented. A pair of glycerol droplets is suspended in air by means of two optical traps. The droplet relative velocities are determined by the droplet sizes. The impact parameter is precisely controlled by positioning the droplets using the two optical traps. The droplets are released by turning off the trapping light using electro-optical modulators. The motion of the sedimenting droplets is then captured by two synchronized high-speed cameras, at a frame rate of up to 63 kHz. The method allows the direct imaging of the collision of droplets without the influence of the optical confinement imposed by the trapping force. The method will facilitate efficient studies of the microphysics of neutral, as well as charged, liquid droplets and their interactions with light, electric field and thermodynamic environment, such as temperature or vapor concentration.

Aerosol droplet optical trap loading using surface acoustic wave nebulization

We demonstrate the use of surface acoustic wave nebulization (SAWN) to load optical traps. We show that the droplets sizes produced can be tuned by altering the RF frequency applied to the devices, which leads to more control over the sizes of trapped particles. Typically the size distribution of the liquid aerosols delivered using SAWN is smaller than via a standard commercial nebulization device. The ability to trap a range of liquids or small solid particles, not readily accessible using other ultrasonic devices, is also demonstrated both in optical tweezers and dual beam fiber traps.

Toward efficient optical trapping of sub-10-nm particles with coaxial plasmonic apertures

Optical trapping using focused laser beams has emerged as a powerful tool in the biological and physical sciences. However, scaling this technique to nanosized objects remains challenging due to the diffraction limit of light and the high power levels required for nanoscale trapping. In this paper, we propose plasmonic coaxial apertures as low-power optical traps for nanosized specimens. The illumination of a coaxial aperture with a linearly polarized plane wave generates a dual optical trapping potential well. We theoretically show that this potential can stably trap dielectric particles smaller than 10 nm in diameter while keeping the trapping power level below 20 mW. By tapering the thickness of the coaxial dielectric channel, trapping can be extended to sub-2-nm particles. The proposed structures may enable optical trapping and manipulation of dielectric particles ranging from single proteins to small molecules with sizes previously inaccessible.

Optically-actuated translational and rotational motion at the microscale for microfluidic manipulation and characterization

The single beam optical trap (optical tweezers), a highly focused beam, is on its way to revolutionizing not only the fields of colloidal physics and biology, but also materials science and engineering. Recently, spatially-extended three-dimensional light patterns have gained considerable usage for exerting force to alter, manipulate, organize and characterize materials. To advance the degree of manipulation, such as rotation of materials in microfluidic environments along with spatial structuring, other beam parameters such as phase and polarization have to be configured. These advances in optical tweezers' technology have enabled complex microfluidic actuation and sorting. In addition to remotely (in a non-contact way) applying force and torques in three-dimensions, which can be continuously varied unlike mechanical manipulators, optical tweezers-based methods can be used for sensing the force of interaction between microscopic objects in a microfluidic environment and for the characterization of micro-rheological properties. In this review, we place emphasis on applications of optical actuation based on novel beams in performing special functions such as rotation, transportation, sorting and characterization of the microscopic objects. Further, we have an extended discussion on optical actuation (transport and rotation) with fiber optic microbeams and spectroscopic characterization in the microfluidic environment. All these advancements in optical manipulation would further facilitate the growing use of optical tools for complex microfluidic manipulations.

Reconfigurable optothermal microparticle trap in air-filled hollow-core photonic crystal fiber

We report a novel optothermal trapping mechanism that occurs in air-filled hollow-core photonic crystal fiber. In the confined environment of the core, the motion of a laser-guided particle is strongly influenced by the thermal-gradient-driven flow of air along the core surface. Known as "thermal creep flow," this can be induced either statically by local heating, or dynamically by the absorption (at a black mark placed on the fiber surface) of light scattered by the moving particle. The optothermal force on the particle, which can be accurately measured in hollow-core fiber by balancing it against the radiation forces, turns out to exceed the conventional thermophoretic force by 2 orders of magnitude. The system makes it possible to measure pN-scale forces accurately and to explore thermally driven flow in micron-scale structures.