Two-dimensional hydrophilic imprinted resin-graphene oxide composite for selective extraction and rapid determination of gibberellin traces in licorice samples

This study presents novel methodologies and materials for selectively and sensitively determining gibberellin traces in licorice to address food safety concerns. A novel hydrophilic imprinted resin-graphene oxide composite (HMIR-GO) was developed with fast mass transfer, high adsorption capacity, and exceptional aqueous recognition performance for gibberellin. Leveraging the advantages of molecular imprinting, hydrophilic resin synthesis, and rapid mass transfer characteristics of GO, HMIR-GO was employed as an adsorbent, showing resistance to matrix interference. Coupled with HPLC, a rapid and selective method for determining gibberellin was established. Under optimal conditions, the method exhibited a wide linear range (0.02-5.00 μg g-1, r = 0.9999), low detection limits (3.3 ng g-1), and satisfactory recoveries (92.0-98.4%), enabling the accurate and rapid detection of gibberellin in licorice. This study introduces a pioneering strategy for the selective extraction and determination of trace gibberellin levels, offering insights for similar applications in functional foods.

Recent advances in emerging application of functional materials in sample pretreatment methods for liquid chromatography-mass spectrometry analysis of plant growth regulators: A mini-review

Plant growth regulators (PGRs) are a class of small molecular compounds, which can remarkably affect the physiological process of plants. The complex plant matrix along with a wide polarity range and unstable chemical properties of PGRs hinder their trace analysis. In order to obtain a reliable and accurate result, a sample pretreatment process must be carried out, including eliminating the interference of the matrix effect and pre-concentrating the analytes. In recent years, the research of functional materials in sample pretreatment has experienced rapid growth. This review comprehensively overviews recent development in functional materials covering one-dimensional materials, two-dimensional materials, and three-dimensional materials applied in the pretreatment of PGRs before liquid chromatography-mass spectrometry (LC-MS) analysis. Besides, the advantages and limitations of the above functionalized enrichment materials are discussed, and their future trends have been prospected. The work could be helpful to bring new insights for researchers engaged in functional materials in sample pretreatment of PGRs based on LC-MS.

Preparation and Application Progress of Imprinted Polymers

Due to the specific recognition performance, imprinted polymers have been widely investigated and applied in the field of separation and detection. Based on the introduction of the imprinting principles, the classification of imprinted polymers (bulk imprinting, surface imprinting, and epitope imprinting) are summarized according to their structure first. Secondly, the preparation methods of imprinted polymers are summarized in detail, including traditional thermal polymerization, novel radiation polymerization, and green polymerization. Then, the practical applications of imprinted polymers for the selective recognition of different substrates, such as metal ions, organic molecules, and biological macromolecules, are systematically summarized. Finally, the existing problems in its preparation and application are summarized, and its prospects have been prospected.

An ultrasensitive probe-free electrochemical immunosensor for gibberellins employing polydopamine-antibody nanoparticles modified electrode

Gibberellins (GA₃) is an ubiquitous plant hormone, which plays a regulatory role in different growth stages of plants, so it is of great significance to develop a sensitive quantitative analysis method for GA₃. In this study, carboxylated graphene oxide- carboxylated multi-walled carbon nanotubes-Fc (GO-MWNT-Fc) composite material and PDANPs-antibody (PDANPs-Ab) were sequentially modified to screen-printed electrodes (SPEs), and an ultrasensitive probe-free immunosensor for GA₃ was developed. Fc was applied to generate electrochemical signals. GO-COOH and MWNT-COOH can increase the catalytic ability of the sensor and bind the PDANPs-Ab nanoparticles. PDANPs nanomaterial were synthetized by a facile self-polymerization and used to bind with antibody, so as to increase the antibody loading of the sensor. The as-prepared immunosensor has the widest detection range (100 aM-1 mM) and lowest detection limit (17.4 aM) for GA₃ up to date. To our knowledge, it is the first electrochemical immunosensor for GA₃. By changing the GA₃ antibody to ABA antibody, a sensitive and selective immunosensor for ABA was also fabricated. This immunosensor platform is simple, sensitive, and low cost. It opens broad prospect in on-site applications for biosensors in detecting of various biomolecules in precision agriculture.

Synthesis, characterization and absorption evaluation of bifunctional monomer magnetic molecularly imprinted polymers nanoparticles for the extraction of 6-benzylaminopurine from vegetables

An adsorbent-magnetic molecularly imprinted polymers nanoparticles (MMIPs NPs) were synthesized for the extraction of 6-benzylaminopurine (6-BA) using Fe₃O₄ as magnetic core. The MIPs were prepared with methacrylic acid and sodium p-styrene sulfonate as bifunctional monomers. The adsorbents were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffractometer, thermogravimetric analysis and vibrating sample magnetometer. The adsorption properties were evaluated by static, kinetic and selective adsorption experiments. The MMIPs NPs exhibit a high adsorption capacity (37.63 mg g^-1) and favorable imprinting factor (2.88) toward 6-BA. The chromatogram of 6-BA extraction using the MMIPs NPs as the adsorbent demonstrates that the matrix interference has been minimized. More importantly, MMIPs NPs can be applied to extracting 6-BA from mung bean sprout and cucumber with satisfactory recoveries (91.14-104.52%), and can be reused for at least five times. This work provides a new strategy to efficiently extract 6-BA from vegetables.

[Novel adsorption material for solid phase extraction in sample pretreatment of plant hormones]

Plant hormones (PHs) are of significance in plant growth, as they regulate the various processes related to plant growth, development, and resistance. Sensitive and precise quantitative analysis of PHs is a bottleneck in plant science research. Currently, liquid chromatography-tandem mass spectrometry is used for the accurate and efficient detection of PHs. Sample pretreatment is an indispensable step in the chromatography-mass spectrometry analysis of PHs because it directly affects the sensitivity and accuracy of subsequent detection methods. Among various pretreatment methods for PHs, solid phase extraction (SPE) is the most widely used. Various new types of SPE, such as dispersive SPE, magnetic SPE, and solid phase microextraction, have been developed by modifying the extraction cartridge. The choice of adsorption material is the key factor in the abovementioned SPE methods, which has a decisive effect on the extraction, purification, and enrichment effects of the target substance in the sample pretreatment process. Carbon-based materials, including carbon nanotubes, graphene, carbon and nitrogen compounds, as well as organic frameworks, including metal organic frameworks and covalent organic materials, are suitable adsorption materials because of their designable structure, large specific surface area, and good stability. Molecularly imprinted polymers and supramolecular compounds show specific molecular recognition based on host-guest interactions, which can significantly improve the selectivity of sample pretreatment methods. In this paper, SPE-related technology and the abovementioned types of functionalized adsorption materials in the pretreatment of PHs prevalent in the past five years have been reviewed. The related development trends are also summarized.

Dummy template based molecularly imprinted solid-phase microextraction coating for analysis of trace disinfection by-product of 2,6-dichloro-1,4-benzoquinone using high-performance liquid chromatography

Trace disinfection by-products (DBPs) produced during the disinfection of drinking water are potentially carcinogenic, teratogenic and mutagenic, which has aroused much attention recently. In this study, a molecularly imprinted (MIP) solid -phase microextraction (SPME) fiber coating was prepared by an in-situ polymerization method using a dummy template molecule for the analysis of trace 2,6-dichloroindole-1,4-benzoquinone (2,6-DCBQ), a typical DBP. The characterization results suggested that this monolithic SPME fiber under the optimized conditions had the porous structure, large surface area and good thermal stability. Due to the strong structural recognition and molecular interaction between MIP SPME coating and target molecule, it showed good extraction selectivity and capacity to trace 2,6-DCBQ with an imprinting factor of 4.7. Then, coupling with high-performance liquid chromatography (HPLC)-ultraviolet (UV) detection, a sensitive analytical method for trace 2,6-DCBQ in water samples was successfully established with a detection limit down to 2.3 ng/mL. The recoveries of the proposed method were in range of 84.4-122% with the relative standard deviations of 1.0-13% (n = 3). The results showed that this MIP SPME-HPLC-UV method possessed high analytical selectivity and sensitivity for trace 2,6-DCBQ in water, which would benefit the improvement of the practicability of DBPs monitoring and detection methodology.

Determination of thirteen acidic phytohormones and their analogues in tea (Camellia sinensis) leaves using ultra high performance liquid chromatography tandem mass spectrometry

Trace plant hormones play an important role in tea growth, development and quick response to biotic and abiotic stresses. However, lack of a sensitive method limits the research on plant hormone regulation for tea quality and yields. Herein, a highly sensitive method was developed using ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) for profiling and quantification of 13 acidic phytohormones and their analogues, including auxins, abscisic acid and gibberellins in fresh tea leaves. After optimizing the different C18 columns and mobile phase systematically, an Agilent Eclipse Plus C18 column combined with the mobile phase A (acetonitrile) and B (water) was employed. Target acidic phytohormones were extracted using acidified methanol, and tea matrices were cleaned up by dispersive solid phase adsorbents of polyvinylpolypyrrolidone (PVPP) and graphitized carbon black (GCB) followed by polymer-based mixed-mode cation-exchange solid phase extraction. The method showed good linearity for all 13 analytes with regression coefficients (R²) > 0.998. Satisfactory recoveries of 12 analytes spiked with three levels ranged from 71.8% to 109.9%, while intra-day and inter-day precisions were below 20%. Limits of detection (LODs) and limits of quantitation (LODs) for 12 acidic phytohormones were 0.1-4.2 μg kg^-1 and 0.3-13.9 μg kg^-1, respectively. Finally, this method was firstly employed to analyze 13 analytes in fresh tea leaves (with the treatment of dormancy, light qualities, exogenous hormones and infestation of pests), highlighting its sufficient capability for rapid analysis of multiclass phytohormones in agriculture field.

Magnetic molecularly imprinted electrochemical sensors: A review

The preparation and practical applications of molecularly imprinted electrochemical sensors (MIECSs) remain challenging due to issues involving electrode surface renewal modes, low adsorption capacities, and sample preparation speeds. To solve these issues, magnetic molecularly imprinted electrochemical sensors (MMIECSs) have been extensively explored by various groups. Recently, MMIECSs fabricated based on diverse strategies have yielded insight into the development of MIECSs, and they have provided effective paths for sample preparation, immobilization and renewal of molecularly imprinted polymers (MIPs) on the electrode surface, leading to promising performances of MIECSs. This review comprehensively describes the research advances for various types of MMIECSs and their applications in the fields of food safety, environmental monitoring, and clinical and pharmaceutical analysis. Based on our understanding of MMIECSs, the literature in this field is thoroughly explored and classified in this review. The challenges existing in this research area and some potential strategies for the rational design of high-performance MMIECS are also outlined.

A fluorescent molecularly imprinted device for the on-line analysis of AFP in human serum

MIT is a promising strategy in antibody free analysis for tumour markers. Conventional nanosized MIPs with off-line analysis are beset by tedious operation and unsatisfactory analysis performance. In this work, an on-line analytical device to directly detect AFP, which is a typical tumour marker in cancer screening, was prepared for the first time. A microscope slide was chosen to be the basis of the device. APBA-PA, a polymerizable fluorescent boronic acid monomer, was synthesised and grafted on the surface of the microscope slide to act as the signal transduction pathway between the templates and the device. Along with the hydrolysis of TEOS and the elution of the templates, a portable, stable, easy to operate and low-cost analysis device for AFP with excellent repeatability was successfully prepared. Owing to the excellent selectivity and highly sensitive fluorescence response ability of the device towards the templates, the on-line detection of AFP in human serum was realized. A series of characterizations were applied to the device, and its analysis performance and possible detection mechanism were carefully studied. Furthermore, the device exhibited appropriate application prospects by comparing its analysis results with those of the commercially available ELISA. In our perception, this work is an important step towards MIPs for clinical applications.

Rapid microwave-assisted distillation–precipitation polymerization for the synthesis of magnetic molecular imprinted polymers coupled to HPTLC determination of perphenazine in human urine

Microwave-assisted distillation–precipitation polymerization (MWDPP) for the synthesis of magnetic molecularly imprinted polymers (MMIPs) under atmospheric pressure is reported.

Magnetic molecularly imprinted polymer prepared by microwave heating for confirmatory determination of chloramphenicol in chicken feed using high-performance liquid chromatography-tandem mass spectrometry

A magnetic molecularly imprinted polymer (MMIP) for chloramphenicol was prepared using a surface-imprinted and microwave-heating-induced polymerization method. The surfaces of the magnetic particles were first double-bond functionalized with 3-(trimethoxysilyl)propyl methacrylate (γ-MPS), followed by the copolymerization of 4-vinyl pyridine (4-VP) and trimethylolpropane trimethacrylate (TRIM) in the presence of chloramphenicol as a template and 1,1-azobis(cyclohexane-carbonitrile) (ABCN) as an initiator in a mixture of dimethyl sulfoxide and water with microwave heating at 80°C. The magnetic polymer possesses supraparamagnetic properties and was used to concentrate and cleanup chicken feed extract, followed by chromatographic separation using a Lichrospher®100 RP C8 column and detection with two multi-reaction monitoring transitions at m/z 321→ 152 and m/z 321→ 257. The mean recoveries obtained at two spiking levels were in the range of 94.6-100% The relative intra- and inter-day standard deviations were in the range of 1.4-2.6% and 5.1-5.7%, respectively. The detection limit of the method was 0.12 µg kg^-1. This confirmatory method was successfully applied to determine chloramphenicol in chicken feed samples.

Green Strategies for Molecularly Imprinted Polymer Development

Molecular imprinting is a powerful technology to create artificial receptors within polymeric matrices. Although it was reported for the first time by Polyakov, eighty-four years ago, it remains, nowadays, a very challenging research area. Molecularly imprinted polymers (MIPs) have been successfully used in several applications where selective binding is a requirement, such as immunoassays, affinity separation, sensors, and catalysis. Conventional methods used on MIP production still use large amounts of organic solvents which, allied with stricter legislation on the use and release of chemicals to the environment and the presence of impurities on final materials, will boost, in our opinion, the use of new cleaner synthetic strategies, in particular, with the application of the principles of green chemistry and engineering. Supercritical carbon dioxide, microwave, ionic liquids, and ultrasound technology are some of the green strategies which have already been applied in MIP production. These strategies can improve MIP properties, such as controlled morphology, homogeneity of the binding sites, and the absence of organic solvents. This review intends to give examples reported in literature on green approaches to MIP development, from nano- to micron-scale applications.

Progress and development of analytical methods for gibberellins

Gibberellins, as a group of phytohormones, exhibit a wide variety of bio-functions within plant growth and development, which have been used to increase crop yields. Many analytical procedures, therefore, have been developed for the determination of the types and levels of endogenous and exogenous gibberellins. As plant tissues contain gibberellins in trace amounts (usually at the level of nanogram per gram fresh weight or even lower), the sample pre-treatment steps (extraction, pre-concentration, and purification) for gibberellins are reviewed in details. The primary focus of this comprehensive review is on the various analytical methods designed to meet the requirements for gibberellins analyses in complex matrices with particular emphasis on high-throughput analytical methods, such as gas chromatography, liquid chromatography, and capillary electrophoresis, mostly combined with mass spectrometry. The advantages and drawbacks of the each described analytical method are discussed. The overall aim of this review is to provide a comprehensive and critical view on the different analytical methods nowadays employed to analyze gibberellins in complex sample matrices and their foreseeable trends.

Selective extraction and determination of fluoroquinolones in bovine milk samples with montmorillonite magnetic molecularly imprinted polymers and capillary electrophoresis

A sensitive and selective method for separating fluoroquinolones (FQs) from bovine milk samples was successfully developed using montmorillonite magnetic molecularly imprinted polymers (MMMIPs) as adsorbents. MMMIPs were prepared using montmorillonite as carrier, fleroxacin (FLE) as template molecule, and Fe3O4 magnetite as magnetic component. MMMIPs possessed high adsorption capacity of 46.3 mg g(-1) for FLE. A rapid and convenient magnetic solid-phase extraction procedure coupled with capillary electrophoresis was established with MMMIPs as adsorbents for simultaneous and selective extraction of four FQs in bovine milk samples. Limits of detection ranged between 12.9 and 18.8 μg L(-1), and the RSDs were between 1.8% and 8.6%. The proposed method was successfully applied to spike bovine milk samples with recoveries of 92.7%-108.6%.

Rapid preparation of molecularly imprinted polymers by microwave-assisted emulsion polymerization for the extraction of florfenicol in milk

In this study, we proposed a rapid and simple method for the preparation of molecularly imprinted polymers (MIPs) by emulsion polymerization. The polymerization process was accelerated by microwave heating, and the reaction time was greatly shortened. The obtained MIPs were spherical in shape and exhibited a uniform morphology. The MIPs with selectivity and high affinity to florfenicol were successfully applied as solid-phase extraction materials to extract and clean up the florfenicol in milk, followed by liquid chromatography-tandem mass spectrometry (LC-MS) analysis. The parameters affecting the performance of extraction and LC-MS analysis were evaluated. The detection limit of the method was 4.1ngmL(-1). The relative standard deviations of intra- and inter-day were in the range of 3.5-4.7% and 3.9-7.5%, respectively.

Magnetic beads as an extraction medium for simultaneous quantification of acetaminophen and structurally related compounds in human serum

This paper describes a sample preparation method that complements a previously published liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay for acetaminophen and eight structurally-related compounds in human serum (C. Bylda, R. Thiele, U. Kobold, D.A. Volmer. Drug Test. Anal. 2014, 6, 451). The analytes (acetaminophen [APAP] + metabolites acetaminophen-glucuronide [APG], -cysteine [APC], -mercapturate [APM] and -cysteine [APC], structurally similar analogues phenacetin and p-phenetidine, as well as tricyclic antidepressants imipramine and amitryptiline) were extracted from serum using magnetized hyper-crosslinked polystyrene particles. The sample preparation protocol was developed by means of a design of experiments (DoE) statistical approach. Using three representative compounds from the analyte panel with different polarities (high, medium, and low), two screening designs were used to identify factors that exhibited significant impact on recovery of the analytes. These parameters were then optimized to permit extraction of the complete target panel exhibiting a broad range of chemical polarities. Liquid chromatographic separations were achieved by gradient elution using a pentafluorphenyl column with subsequent detection by electrospray ionization-triple quadrupole mass spectrometry in multiple reaction monitoring (MRM) mode. The method was linear over the range 0.1-100 µg/mL for APAP, APG, p-phenetidine and phenacetin, 0.03-50 µg/mL for APS, and 0.01-10 µg/mL for APM, APC, imipramine and amitriptyline, with R(2)  > 0.99. The assay exhibited good precision with CVs ranging from 2 to 9% for all analytes; the accuracy was assessed by comparing two LC-MS/MS methods using a set of 68 patient samples.

Determination of gibberellins in soybean using tertiary amine labeling and capillary electrophoresis coupled with electrochemiluminescence detection

A novel sensitive method based on tertiary amine labeling for the analysis of gibberellins (GAs) by capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection was proposed. GA3 was tagged with 2-(2-aminoethyl)-1-methylpyrrolidine (AEMP) using N, N'-dicyclohexylcarbodiimide (DCC) and 3,4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine (HOOBt) as coupling agents in acetonitrile to produce GA3-AEMP-derivative. The GA3-AEMP-derivative was injected into CE by electrokinetic injection and detected by Ru(bpy)3(2+)-based ECL. The parameters affecting derivatization, detection and separation such as concentration of reactants, detection potential, pH and concentration of separation buffer, were investigated in detail. Under optimum conditions, the linear concentration range for GA3 was from 2.0×10(-7) to 1.28×10(-4)M with a correlation coefficient of 0.9997. The detection limit was 8×10(-8)M (S/N=3). The relative standard deviations of migration time, peak intensity and peak area for nine continuous injections of 2.0×10(-5)M GA3-AEMP-derivative were 1.0%, 2.1% and 4.2%, respectively. The developed approach was successfully applied to the determination of total GAs in the stem, leaf and seed of soybean (Glycine max [L.] Merr.) with recoveries in the range from 89.6% to 99.3%.

Molecularly imprinted electrochemical luminescence sensor based on signal amplification for selective determination of trace gibberellin A3

A new molecularly imprinted electrochemical luminescence (MIP-ECL) sensor was developed for Gibberellin A3 (GA3) determination. This sensor is based on competitive binding between the GA3 and the Rhodamine B (RhB)-labeled GA3 (RhB-GA3) to the MIP film. After the competitive binding, the residual RhB-GA3 on the MIP was electro-oxidized to produce RhB oxide, which could greatly amplify the weak electrochemiluminescence (ECL) signal of luminol. The ECL intensity decreased when the RhB-GA3 was replaced by GA3 molecules in the samples. Accordingly, GA3 was determined in the concentration range from 1 × 10(-11) to 3 × 10(-9) mol/L with a detection limit of 3.45 × 10(-12) mol/L. The sensor shows high sensitivity and selectivity, wide response range, good accuracy, and fast response. Beer samples were assayed by using the sensors, and the recoveries ranging from 96.0% to 103.2% were obtained.

Microwave-assisted synthesis of carbon nanodots through an eggshell membrane and their fluorescent application

Carbon nanodots (C-Dots) as a new form of carbonaceous nanomaterials have aroused much interest and intensive research due to their inspiring properties. Compared to traditional semiconductor quantum dots, these newly emergent nanodots possess a number of advantageous characteristics, among which low-toxicity is particularly fascinating. More and more research into C-Dots have focused on synthesis methods and biology-related applications. Microwave-assisted approaches have attracted attention because microwave treatment can provide intensive and efficient energy, and as a consequence shorten the reaction time. In this article, we designed a "green", rapid, eco-friendly and waste-reused approach to synthesize fluorescent and water-soluble C-Dots from eggshell membrane (ESM) ashes according to a microwave-assisted process. ESM selected as the carbon source was a common protein-rich waste in daily life and can be obtained easily and cheaply. The C-Dots from our method showed the maximal fluorescence emission peak at 450 nm and the fluorescence quantum yield was about 14%. We further designed a sensitive probe for glutathione based on the fluorescence turn off and on of the C-Dots-Cu(2+) system, which showed a linear range of 0.5-80 μmol L(-1) and detection limit of 0.48 μmol L(-1). In general, the C-Dots prepared briefly and inexpensively from ESM revealed excellent fluorescent property with promising potential for applications such as sample detection and biotechnology.