Flexible electrospun nanofibrous film integrated with fluorescent carbon dots for smartphone-based detection and cellular imaging application

The dose of administered chemotherapy drugs is crucial to determine due to the potential for efficient or adverse outcomes for cancer patients. To date, no user-friendly and low-cost method of doxorubicin (DOX) detection using nontoxic and biodegradable materials has been reported. For this reason, in this work, we have developed for the first time a nanofiber-based sensing platform for sensitive and on-site DOX assay in just 10 min. This is obtained thanks to printable, porosity and embeddability features of electrospun nanofibrous films (ENFFs) combined with nitrogen and sulfur co-doped carbon dots (NS-CDs) as sensing probes. The assay was done by just pipetting analyte on the hydrophilic spots of the fabricated photoluminescence water-stable ENFFs where the color intensity was being darkened. DOX quenched NS-CDs fluorescence onto ENFFs through inner filter effect. The developed sensor was either coupled with smartphone technology to provide miniaturized, portable and easy-to-use device or an ordinary spectrofluorimeter for solid-state sensing applications (detection limit of 5.4 nM). Moreover, applicability of the designed sensor was evaluated in human serum with satisfactory recoveries. It is more interesting that the fabricated NS-CDs/ENF scaffolds have a high potential to detect the intracellular DOX to enhance cell proliferation leading to be considered as a multimodal tool in biomedical research and clinical diagnostics.

Fluorescence detection and removal of copper from water using a biobased and biodegradable 2D soft material

We have developed a green and robust fluorogenic (λ_ex = 410 nm, λ_em = 510 nm) cellulose membrane using graphene oxide (GO) as a construct for simultaneous copper ion recognition and filtration at environmentally relevant levels.

Fluorescence Sensing with Cellulose-Based Materials

Cellulose-based materials functionalized with fluorescence sensors are highly topical and are employed in many areas of functional materials, including the sensing of heavy-metal ions and anions as well as being widely used as chemical sensors and tools for environmental applications. In this Review, we cover recent progress in the development of cellulose-based fluorescence sensors as parts of membranes and nanoscale materials for the detection of biological analytes. We believe that this Review will be of interest to chemists, chemical engineers, and biochemists in the sensor community as well as researchers working with biological material systems.

Penicillamine-protected Ag20 nanoclusters and fluorescence chemosensing for trace detection of copper ions

We report the synthesis of penicillamine-protected Ag₂₀ nanoclusters (NCs), with properties of high monodispersity, red fluorescence and water solubility. Full characterization of the Ag₂₀ NCs is addressed, along with first-principles optimization calculations, revealing the chemical composition and structure of the as-prepared Ag NCs within a molecular formula [Ag₂₀(DPA)₁₈-H]^-. Moreover, natural bond orbital (NBO) analysis demonstrates the charge-transfer interactions between the ligand and Ag atoms, and helps in understanding the origins of fluorescence of Ag₂₀ NCs related to the ligand-to-metal charge transfer (LMCT) mechanism. Further, fluorescence chemosensing of the Ag₂₀ NCs is demonstrated for tracing copper ions with high sensitivity and selectivity in aqueous solution.

Immobilization of gold nanoclusters inside porous electrospun fibers for selective detection of Cu(II): A strategic approach to shielding pristine performance

Here, a distinct demonstration of highly sensitive and selective detection of copper (Cu²⁺) in a vastly porous cellulose acetate fibers (pCAF) has been carried out using dithiothreitol capped gold nanocluster (DTT.AuNC) as fluorescent probe. A careful optimization of all potential factors affecting the performance of the probe for effective detection of Cu²⁺ were studied and the resultant sensor strip exhibiting unique features including high stability, retained parent fluorescence nature and reproducibility. The visual colorimetric detection of Cu²⁺ in water, presenting the selective sensing performance towards Cu²⁺ ions over Zn²⁺, Cd²⁺ and Hg²⁺ under UV light in naked eye, contrast to other metal ions that didn’t significantly produce such a change. The comparative sensing performance of DTT.AuNC@pCAF, keeping the nonporous CA fiber (DTT.AuNC@nCAF) as a support matrix has been demonstrated. The resulting weak response of DTT.AuNC@nCAF denotes the lack of ligand protection leading to the poor coordination ability with Cu²⁺. The determined detection limit (50 ppb) is far lower than the maximum level of Cu²⁺ in drinking water (1.3 ppm) set by U.S. Environmental Protection Agency (EPA). An interesting find from this study has been the specific oxidation nature between Cu²⁺ and DTT.AuNC, offering solid evidence for selective sensors.

Detection of residual rifampicin in urine via fluorescence quenching of gold nanoclusters on paper

Background

Rifampicin or rifampin (R) is a common drug used to treat inactive meningitis, cholestatic pruritus and tuberculosis (TB), and it is generally prescribed for long-term administration under regulated dosages. Constant monitoring of rifampicin is important for controlling the side effects and preventing overdose caused by chronic medication. In this study, we present an easy to use, effective and less costly method for detecting residual rifampicin in urine samples using protein (bovine serum albumin, BSA)-stabilized gold nanoclusters (BSA-Au NCs) adsorbed on a paper substrate in which the concentration of rifampicin in urine can be detected via fluorescence quenching. The intensity of the colorimetric assay performed on the paper-based platforms can be easily captured using a digital camera and subsequently analyzed.

Results

The decreased fluorescence intensity of BSA-Au NCs in the presence of rifampicin allows for the sensitive detection of rifampicin in a range from 0.5 to 823 µg/mL. The detection limit for rifampicin was measured as 70 ng/mL. The BSA-Au NCs were immobilized on a wax-printed paper-based platform and used to conduct real-time monitoring of rifampicin in urine.

Conclusion

We have developed a robust, cost-effective, and portable point-of-care medical diagnostic platform for the detection of rifampicin in urine based on the ability of rifampicin to quench the fluorescence of immobilized BSA-Au NCs on wax-printed papers. The paper-based assay can be further used for the detection of other specific analytes via surface modification of the BSA in BSA-Au NCs and offers a useful tool for monitoring other diseases.

Electronic supplementary material

The online version of this article (doi:10.1186/s12951-015-0105-5) contains supplementary material, which is available to authorized users.

In-solution multiplex miRNA detection using DNA-templated silver nanocluster probes

MicroRNAs (miRNAs) are small regulatory RNAs (size ∼21nt to ∼25nt) that can be used as biomarkers of disease diagnosis, and efforts have been directed towards the invention of a rapid, simple and sequence-selective detection method for miRNAs. We recently developed a DNA/silver nanoclusters (AgNCs)-based turn-off fluorescence method in the presence of target miRNA. To further advance our method toward multiplex miRNA detection in solution, the design of various fluorescent DNA/AgNCs probes was essential. Therefore, tethering of DNA-12nt scaffolds with 9 different AgNCs emitters to target-sensing DNA sequences was investigated. Interestingly, for the creation of spectrally different DNA/AgNCs probes, not only were the emitters encapsulated in 9 different DNA-12nt scaffolds necessary but the tethered target-sensing DNA sequences are also crucial to tune the fluorescence across the visible to infra-red region. In this study, we obtained three spectrally distinctive emitters of each DNA/AgNCs probes such as green, red, and near-infrared (NIR) fluorescence. Using these DNA/AgNCs probes, we here show a proof of concept for a rapid, one-step, in-solution multiplex miRNA detection method.

Clinical chemistry measurements with commercially available test slides on a smartphone platform: Colorimetric determination of glucose and urea

BACKGKROUND

Rapidly increasing healthcare costs in economically advantaged countries are currently unsustainable, while in many developing nations, even 50-year-old technologies are too expensive to implement. New and unconventional technologies are being explored as solutions to this problem. In this study, we examined the use of a smartphone as the detection platform for 2 well-developed, relatively inexpensive, commercially available clinical chemistry assays as a model for rapid and inexpensive clinical diagnostic testing.

METHODS

An Apple iPhone 4 camera phone equipped with a color analysis application (ColorAssist) was combined with Vitros® glucose and urea colorimetric assays. Color images of assay slides at various concentrations of glucose or urea were collected with the iPhone 4 and quantitated in three different spectral ranges (red/green/blue or RGB) using the ColorAssist app. When the diffuse reflectance data was converted into absorbance, it was possible to quantitate glucose or blood urea nitrogen (BUN) over their clinically important concentration ranges (30-515mg/dl for glucose or 2-190mg/dl for BUN), with good linearity (R(2)=0.9994 or 0.9996, respectively [n=5]).

RESULTS

Data collected using the iPhone 4 and canine serum samples were in agreement with results from the instrumental "gold standard" (Beckman Coulter AU480 Chemistry System) (R(2)=0.9966 and slope=1.0001 for glucose; R(2)=0.9958 and slope=0.9454 for BUN). Glucose determinations of serum samples made using this smartphone method were as accurate as or more accurate than a commercial colorimetric dry slide analyzer (Heska® Element DC Chemistry Analyzer, Loveland, CO) and 2 glucometers: ReliOn® Ultima (Abbott Diabetes Care Inc) and Presto® (AgaMatrix Inc.H). BUN determinations made using the smartphone approach were comparable in accuracy to the Heska instrument.

CONCLUSION

This demonstration shows that smartphones have the potential to be used as simple, effective colorimetric detectors for quantitative diagnostic tests, and may be applicable for both point-of-care applications in the developed world and field deployment in developing nations.

Sensitive detection of mercury and copper ions by fluorescent DNA/Ag nanoclusters in guanine-rich DNA hybridization

In this work, we designed a new fluorescent oligonucleotides-stabilized silver nanoclusters (DNA/AgNCs) probe for sensitive detection of mercury and copper ions. This probe contains two tailored DNA sequence. One is a signal probe contains a cytosine-rich sequence template for AgNCs synthesis and link sequence at both ends. The other is a guanine-rich sequence for signal enhancement and link sequence complementary to the link sequence of the signal probe. After hybridization, the fluorescence of hybridized double-strand DNA/AgNCs is 200-fold enhanced based on the fluorescence enhancement effect of DNA/AgNCs in proximity of guanine-rich DNA sequence. The double-strand DNA/AgNCs probe is brighter and stable than that of single-strand DNA/AgNCs, and more importantly, can be used as novel fluorescent probes for detecting mercury and copper ions. Mercury and copper ions in the range of 6.0-160.0 and 6-240 nM, can be linearly detected with the detection limits of 2.1 and 3.4 nM, respectively. Our results indicated that the analytical parameters of the method for mercury and copper ions detection are much better than which using a single-strand DNA/AgNCs.

A fluorescent light-up platform with "AIE + ESIPT" characteristics for multi-target detection both in solution and on paper strip

We report a fluorescent light-up platform for multi-target detection in aqueous solution and on paper strip. The platform is based on a salicylaldazine fluorogen with aggregation-induced emission (AIE) and excited state intramolecular proton transfer (ESIPT) characteristics, which shows distinct advantages including ease of chemical modifications, free of self-quenching effect, excellent light-up ratio and large Stokes shift. To demonstrate the versatility of the platform, palladium cation and perborate anion, as well as UV light, were selected as the targets. The three representative probes, AIE-Pd, AIE-perborate and AIE-UV, light up specifically in the presence of the target both in aqueous solution and on paper strip. The immediate naked-eye response makes the probes ideal for instrument-free and power-free detection.

Colorimetric disposable paper coated with ZnO@ZnS core-shell nanoparticles for detection of copper ions in aqueous solutions

In this study, we have proposed a new nanoparticle-containing test paper sensor that could be used as an inexpensive, easy-to-use, portable, and highly selective sensor to detect Cu(2+) ions in aqueous solutions. This disposable paper sensor is based on ZnO@ZnS core-shell nanoparticles. The core-shell nanoparticles were synthesized using a chemical method and then they were used for coating the paper. The synthesis of the ZnO@ZnS core-shell nanoparticles was performed at a temperature as low as 60 °C, and so far this is the lowest temperature for the synthesis of such core-shell nanoparticles. The sensitivity of the paper sensor was investigated for different Cu(2+) ion concentrations in aqueous solutions and the results show a direct linear relation between the Cu(2+) ions concentration and the color intensity of the paper sensor with a visual detection limit as low as 15 μM (∼0.96 ppm). Testing the present paper sensor on real river turbulent water shows a maximum 5% relative error for determining the Cu(2+) ions concentration, which confirms that the presented paper sensor can successfully be used efficiently for detection in complex solutions with high selectivity. Photographs of the paper sensor taken using a regular digital camera were transferred to a computer and analyzed by ImageJ Photoshop software. This finding demonstrates the potential of the present disposable paper sensor for the development of a portable, accurate, and selective heavy metal detection technology.

Protein-templated gold nanoclusters sequestered within sol-gel thin films for the selective and ratiometric luminescence recognition of Hg2+

Sequestration of bovine serum albumin (BSA)-stabilized gold nanoclusters (AuNCs@BSA) prepared using microwave assistance within sol-gel-derived mesoporous silica films permits the selective and highly sensitive quenchometric detection of aqueous Hg(2+) (limit of detection = 600 pM) with luminescence signal arising from oxidized BSA allowing for an analytically robust and reliable ratiometric detection. Overall, this work highlights a number of important advances, including the highest luminescence quantum yield reported to date for a protein-templated luminescent noble metal nanocluster (13%) made possible using a microwave-mediated synthesis followed by cold incubation. We also demonstrate the clear advantage of exploiting the luminescence signal arising from oxidized BSA as an internal reference to generate selectivity of response to Hg(2+). A careful Stern-Volmer quenching analysis reveals the persistence of two unique quenching sites for AuNCs@BSA entrapped within a sol-gel-derived glass, a minor population of which is unquenchable. Finally, based on these AuNCs@BSA nanosensors, we advise a path forward for paper-based indicator strip detection of heavy metals in aqueous streams, the implementation of which can be performed using the unaided eye, making it a meaningful approach for routine screening and in resource-limited situations.

Effect of salts, solvents and buffer on miRNA detection using DNA silver nanocluster (DNA/AgNCs) probes

MicroRNAs (miRNAs) are small regulatory RNAs (size ~21 nt to ~25 nt) which regulate a variety of important cellular events in plants, animals and single cell eukaryotes. Especially because of their use in diagnostics of human diseases, efforts have been directed towards the invention of a rapid, simple and sequence selective detection method for miRNAs. Recently, we reported an innovative method for the determination of miRNA levels using the red fluorescent properties of DNA/silver nanoclusters (DNA/AgNCs). Our method is based on monitoring the emission drop of a DNA/AgNCs probe in the presence of its specific target miRNA. Accordingly, the accuracy and efficiency of the method relies on the sensitivity of hybridization between the probe and target. To gain specific and robust hybridization between probe and target, we investigated a range of diverse salts, organic solvents, and buffer to optimize target sensing conditions. Under the newly adjusted conditions, the target sensitivity and the formation of emissive DNA/AgNCs probes were significantly improved. Also, fortification of the Tris-acetate buffer with inorganic salts or organic solvents improved the sensitivity of the DNA/AgNC probes. On the basis of these optimizations, the versatility of the DNA/AgNCs-based miRNA detection method can be expanded.

Protein-directed synthesis of pH-responsive red fluorescent copper nanoclusters and their applications in cellular imaging and catalysis

The development of functional copper nanoclusters (Cu NCs) is becoming increasingly widespread in consumer technologies due to their applications in cellular imaging and catalysis. Herein, we report a simple protein-directed synthesis of stable, water-soluble and fluorescent Cu NCs, using BSA as the stabilising agent. Meanwhile, in this study, hydrazine hydrate (N₂H₄·2H₂O) was used as the reducing agent. N₂H₄·2H₂O was a mild reducing agent suggesting that all processes could be operated at room temperature. The as-prepared Cu NCs showed red fluorescence with a peaking center at 620 nm (quantum yield 4.1%). The fluorescence of the as-prepared BSA-Cu NCs was responsive to pH in that the intensity of fluorescence increased rapidly by decreasing the pH from 12 to 6. Besides, with an arresting set of features including water-dispersibility, red fluorescence, good biocompatibility, surface-bioactivity and small size, the resultant BSA-Cu NCs could be used as probes for cellular imaging and catalysis. In this study, CAL-27 cells and the reaction of oxidation of styrene are used as models to achieve fluorescence imaging and elucidate the catalytic activity of the as-prepared BSA-Cu NCs.

A sensitive dual colorimetric and fluorescence system for assaying the activity of alkaline phosphatase that relies on pyrophosphate inhibition of the peroxidase activity of copper ions

A novel and highly sensitive optical assay for the accurate determination of alkaline phosphatase activity is developed by utilizing the peroxidase activity of Cu²⁺ ions.

Quantitative Fluorescence Assays Using a Self-Powered Paper-Based Microfluidic Device and a Camera-Equipped Cellular Phone

Fluorescence assays often require specialized equipment and, therefore, are not easily implemented in resource-limited environments. Herein we describe a point-of-care assay strategy in which fluorescence in the visible region is used as a readout, while a camera-equipped cellular phone is used to capture the fluorescent response and quantify the assay. The fluorescence assay is made possible using a paper-based microfluidic device that contains an internal fluidic battery, a surface-mount LED, a 2-mm section of a clear straw as a cuvette, and an appropriately-designed small molecule reagent that transforms from weakly fluorescent to highly fluorescent when exposed to a specific enzyme biomarker. The resulting visible fluorescence is digitized by photographing the assay region using a camera-equipped cellular phone. The digital images are then quantified using image processing software to provide sensitive as well as quantitative results. In a model 30 min assay, the enzyme β-D-galactosidase was measured quantitatively down to 700 pM levels. This Communication describes the design of these types of assays in paper-based microfluidic devices and characterizes the key parameters that affect the sensitivity and reproducibility of the technique.

Colorimetric detection of copper ions in sub-micromolar concentrations using a triarylamine-linked resin bead

The triarylamine derivative ETPA reacts with Cu(2+) to give deeply colored, stable radical cations in acetonitrile solution. ETPA was immobilized on to a tentagel resin bead which was then used for the fabrication of a simple device capable of the colorimetric detection of submicromolar concentrations of Cu(2+) ions in water. The naked eye detection limit reported here for Cu(2+) is one of the lowest ever reported for small molecule sensors.