Polydopamine Coating of Graphitic Carbon Nitride, g-C3N4, Improves Biomedical Application

Graphitic carbon nitride (g-C3N4) is an intriguing nanomaterial that exhibits photoconductive fluorescence properties under UV-visible light. Dopamine (DA) coating of g-C3N4 prepared from melamine was accomplished via self-polymerization of DA as polydopamine (PDA). The g-C3N4 was coated with PDA 1, 3, and 5 times repeatedly as (PDA@g-C3N4) in tris buffer at pH 8.5. As the number of PDA coatings was increased on g-C3N4, the peak intensity at 1512 cm-1 for N-H bending increased. In addition, the increased weight loss values of PDA@g-C3N4 structures at 600 °C from TGA thermograms confirmed that the coating was accomplished. The band gap of g-C3N4, 2.72 eV, was reduced to 0.87 eV after five coatings with PDA. A pristine g-C3N4 was found to have an isoelectric point (IEP) of 4.0, whereas the isoelectric points of 1PDA@g-C3N4 and 3PDA@g-C3N4 are close to each other at 3.94 and 3.91, respectively. On the other hand, the IEP of 5PDA@g-C3N4 was determined at pH 5.75 assuming complete coating with g-C3N4. The biocompatibility of g-C3N4 and PDA@g-C3N4 against L929 fibroblast cell lines revealed that all PDA@g-C3N4 coatings were found to be biocompatible up to a 1000 mg/mL concentration, establishing that PDA coatings did not adversely affect the biocompatibility of the composite materials. In addition, PDA@g-C3N4 was screened for antioxidant potential via total phenol content (TPC) and total flavonoid content assays and it was found that PDA@g-C3N4 has recognizable TPC values and increased linearly with an increased number of PDA coatings. Furthermore, blood compatibility of pristine g-C3N4 is enhanced considerably upon PDA coating, affirmed by hemolysis and the blood clotting index%. Additionally, α-glucosidase inhibitory properties of PDA@g-C3N4 structures revealed that 67.6 + 9.8% of this enzyme was evenly inhibited by 3PDA@g-C3N4 structure.

Carbon nanotubes as neuroprotective agents

Carbon nanotubes, an emerging class of carbon nanomaterials, possess tremendous potential for application in biotechnology and biomedicine particularly in neurological disorders. Carbon nanotubes owing to their fascinating properties have the potential to revolutionize medicine and technology, particularly in the realm of drug delivery, biosensing, bioimaging, and as therapeutic agents to tackle complex neurological disorders such as Alzheimer's and Parkinson's disease. In this review, a summary of the use of carbon nanotubes for neuropathological outcomes such as alleviating oxidative stress and amyloid formation, which are well-studied molecular outcomes associated with Alzheimer's and Parkinson's disease. In the end, challenges associated with the clinical testing of carbon nanotubes and possible ways to overcome them are highlighted.

The sp3 Defect Decreases Charge Carrier Lifetime in (8,3) Single-Walled Carbon Nanotubes

A recent experimental approach introduces sp3 defects into single-walled carbon nanotubes (SWNTs) through controlled functionalization with guanine, resulting in a decrease in charge carrier lifetime. However, the physical mechanism behind this phenomenon remains unclear. We employ nonadiabatic molecular dynamics to systematically model the nonradiative recombination process of electron-hole pairs in SWNTs with sp3 defects generated by a guanine molecule. We demonstrate that the introduction of sp3 defects creates an overlapping channel between the highest occupied (HOMO) and lowest unoccupied molecular orbital (LUMO), significantly enhancing the nonadiabatic (NA) coupling and leading to a 4.7-fold acceleration in charge carrier recombination compared to defect-free SWNTs. The charge carrier recombination slows significantly at a lower temperature (50 K) due to the weakening of the NA coupling. Our results rationalize the accelerated recombination of charge carriers in SWNTs with sp3 defects in experiments and contribute to a deeper understanding of the carrier dynamics in SWNTs.

Precision Covalent Chemistry for Fine-Size Tuning of Sandwiched Nanoparticles between Graphene Nanoplatelets

The covalent functionalization of graphene for enhancing their stability, improving their electrical or optical properties, or creating hybrid structures has continued to attract extensive attention; however, a fine control of nanoparticle (NP) size between graphene layers via covalent-bridging chemistry has not yet been explored. Herein, precision covalent chemistry-assisted sandwiching of ultrasmall gold nanoparticles (US-AuNP) between graphene layers is described for the first time. Covalently interconnected graphene (CIG) nanoscaffolds with a preadjusted finely tuned graphene layer-layer distance facilitated the formation of sandwiched US-AuNPs (∼1.94 ± 0.20 nm, 422 AuNPs). The elemental composition analysis by X-ray photoelectron spectroscopy displayed an aniline group addition per ∼55 graphene carbon atoms. It provided information on covalent interconnection via amidic linkages, while Raman spectroscopy offered evidence of covalent surface functionalization and the number of graphene layers (≤2-3 layers). High-resolution transmission electron microscopy images indicated a layer-layer distance of 2.04 nm, and low-angle X-ray diffraction peaks (2θ at 24.8 and 12.5°) supported a layer-layer distance increase compared to the characteristic (002) reflection (2θ at 26.5°). Combining covalent bridging with NP synthesis may provide precise control over the metal/metal oxide NP size and arrangement between 2D layered materials, unlocking new possibilities for advanced applications in energy storage, electrochemical shielding, and membranes.

Nanoantibiotic effect of carbon-based nanocomposites: epicentric on graphene, carbon nanotubes and fullerene composites: a review

Carbon in many different forms especially, Graphene, Carbon nanotubes (CNTs), and Fullerene is emerging as an important material in the areas of the biomedical field for various applications. This review comprehensively describes the nano antibiotic effect of carbon-based nanocomposites: epicenter on graphene, carbon nanotubes, and fullerene Composites. It summarises the studies conducted to evaluate their antimicrobial applications as they can disrupt the cell membrane of bacteria resulting in cell death. The initial section gives a glimpse of both "Gram"-positive and negative bacteria, which have been affected by Graphene, CNTs, and Fullerene-based nanocomposites. These bacteria include Staphylococcus Aureus, Bacillus Thuringiensis, Enterococcus faecalis, Enterococcus faecium, Bacillus subtilis, Escherichia coli, Klebseilla pneumoniae, Pseudomonas aeroginosa, Pseudomonas syringae , Shigella flexneri,Candida Albicans, Mucor. Another section is dedicated to the insight of Graphene, and its types such as Graphene Oxide (GO), Reduced graphene oxide (rGO), Graphene Nanoplatelets (GNPs), Graphene Nanoribbons (GNRs), and Graphene Quantum Dots (GQDs). Insight into CNT, including both the types SWCNT and MWCNT, studied, followed by understanding fullerene is also reported. Another section is dedicated to the antibacterial mechanism of Graphene, CNT, and Fullerene-based nanocomposites. Further, an additional section is dedicated to a comprehensive review of the antibacterial characteristics of Graphene, CNT, and nanocomposites based on fullerene. Future perspectives and recommendations have also been highlighted in the last section.

Azide modification forming luminescent sp2 defects on single-walled carbon nanotubes for near-infrared defect photoluminescence

Azide functionalization produced luminescent sp²-type defects on single-walled carbon nanotubes, by which defect photoluminescence appeared in near infrared regions (1116 nm). Changes in exciton properties were induced by localization effects at the defect sites, creating exciton-engineered nanomaterials based on the defect structure design.

The Effects of Physical-Chemical Evolution of High-Sulfur Petroleum Coke on Hg0 Removal from Coal-Fired Flue Gas and Exploration of Its Micro-Scale Mechanism

As the solid waste by-product from the delayed coking process, high-sulfur petroleum coke (HSPC), which is hardly used for green utilization, becomes a promising raw material for Hg⁰ removal from coal-fired flue gas. The effects of the physical-chemical evolution of HSPC on Hg⁰ removal are discussed. The improved micropores created by pyrolysis and KOH activation could lead to over 50% of Hg⁰ removal efficiency with the loss of inherent sulfur. Additional S-containing and Br-containing additives are usually introduced to enhance active surface functional groups for Hg⁰ oxidation, where the main product are HgS, HgBr, and HgBr₂. The chemical-mechanical activation method can make additives well loaded on the surface for Hg⁰ removal. The DFT method is used to sufficiently explain the micro-scale reaction mechanism of Hg⁰ oxidation on the surface of revised-HSPC. ReaxFF is usually employed for the simulation of the pyrolysis of HSPC. However, the developed mesoporous structure would be a better choice for Hg⁰ removal in that the coupled influence of pore structure and functional groups plays a comprehensive role in both adsorption and oxidation of Hg⁰. Thus, the optimal porous structure should be further explored. On the other hand, both internal and surface sulfur in HSPC should be enhanced to be exposed to saving sulfur additives or obtaining higher Hg⁰ removal capacity. For it, controllable pyrolysis with different pyrolysis parameters and the chemical-mechanical activation method is recommended to both improve pore structure and increase functional groups for Hg⁰ removal. For simulation methods, ReaxFF and DFT theory are expected to explain the micro-scale mechanisms of controllable pyrolysis, the chemical-mechanical activation of HSPC, and further Hg⁰ removal. This review work aims to provide both experimental and simulational guidance to promote the development of industrial application of Hg⁰ adsorbent based on HSPC.

Gel Chromatography for Separation of Single-Walled Carbon Nanotubes

Carbon nanotubes (CNTs), having either metallic or semiconducting properties depending on their chirality, are advanced materials that can be used for different devices and materials (e.g., fuel cells, transistors, solar cells, reinforced materials, and medical materials) due to their excellent electrical conductivity, mechanical strength, and thermal conductivity. Single-walled CNTs (SWNTs) have received special attention due to their outstanding electrical and optical properties; however, the inability to selectively synthesize specific types of CNTs has been a major obstacle for their commercialization. Therefore, researchers have studied different methods for the separation of SWNTs based on their electrical and optical properties. Gel chromatography methods enable the large-scale separation of metallic/semiconducting (m/s) SWNTs and single-chirality SWNTs with specific bandgaps. The core principle of gel chromatography-based SWNT separation is the interaction between the SWNTs and gels, which depends on the unique electrical properties of the former. Controlled pore glass, silica gel, agarose-based gel, and allyl dextran-based gel have been exploited as mediums for gel chromatography. In this paper, the interaction between SWNTs and gels and the different gel chromatography-based SWNT separation technologies are introduced. This paper can serve as a reference for researchers who plan to separate SWNTs with gel chromatography.

Growth of Semiconducting Single-Walled Carbon Nanotubes Array by Precisely Inhibiting Metallic Tubes Using ZrO2 Nanoparticles

Synthesis of high-quality single-walled carbon nanotubes arrays with pure semiconducting type is crucial for the fabrication of integrated circuits in nanoscale. However, the naturally grown carbon nanotubes usually have diverse structures and properties. Here the bicomponent catalyst using Au and ZrO₂ is designed and prepared. The Au nanoparticle serves as the catalysts for carbon feedstock cracking and facilitating the nucleation of carbon nanotubes, whereas the close-connected ZrO₂ forms a localized etching zone around Au by releasing lattice oxygen and to inhibit the nucleation of metallic carbon nanotubes precisely. The obtained single-walled carbon nanotubes array show a high semiconducting content of >96%, on the basis of good performance of field-effect transistor devices. And such building of localized etching zone is compatible with other catalyst systems as a universal and efficient method for the scalable production of semiconducting carbon nanotubes.

Tuning Electrostatic Gating of Semiconducting Carbon Nanotubes by Controlling Protein Orientation in Biosensing Devices

The ability to detect proteins through gating conductance by their unique surface electrostatic signature holds great potential for improving biosensing sensitivity and precision. Two challenges are: (1) defining the electrostatic surface of the incoming ligand protein presented to the conductive surface; (2) bridging the Debye gap to generate a measurable response. Herein, we report the construction of nanoscale protein-based sensing devices designed to present proteins in defined orientations; this allowed us to control the local electrostatic surface presented within the Debye length, and thus modulate the conductance gating effect upon binding incoming protein targets. Using a β-lactamase binding protein (BLIP2) as the capture protein attached to carbon nanotube field effect transistors in different defined orientations. Device conductance had influence on binding TEM-1, an important β-lactamase involved in antimicrobial resistance (AMR). Conductance increased or decreased depending on TEM-1 presenting either negative or positive local charge patches, demonstrating that local electrostatic properties, as opposed to protein net charge, act as the key driving force for electrostatic gating. This, in turn can, improve our ability to tune the gating of electrical biosensors toward optimized detection, including for AMR as outlined herein.

Tuning Electrostatic Gating of Semiconducting Carbon Nanotubes by Controlling Protein Orientation in Biosensing Devices

The ability to detect proteins through gating conductance by their unique surface electrostatic signature holds great potential for improving biosensing sensitivity and precision. Two challenges are: (1) defining the electrostatic surface of the incoming ligand protein presented to the conductive surface; (2) bridging the Debye gap to generate a measurable response. Herein, we report the construction of nanoscale protein-based sensing devices designed to present proteins in defined orientations; this allowed us to control the local electrostatic surface presented within the Debye length, and thus modulate the conductance gating effect upon binding incoming protein targets. Using a β-lactamase binding protein (BLIP2) as the capture protein attached to carbon nanotube field effect transistors in different defined orientations. Device conductance had influence on binding TEM-1, an important β-lactamase involved in antimicrobial resistance (AMR). Conductance increased or decreased depending on TEM-1 presenting either negative or positive local charge patches, demonstrating that local electrostatic properties, as opposed to protein net charge, act as the key driving force for electrostatic gating. This, in turn can, improve our ability to tune the gating of electrical biosensors toward optimized detection, including for AMR as outlined herein.

Protonation of Cytosine-Rich Telomeric DNA Fragments by Carboxylated Carbon Nanotubes: Insights from Computational Studies

In this work, we studied, using computational methods, the protonation reactions of telomeric DNA fragments being due to interaction with carboxylated carbon nanotubes. The applied computational methodology is divided into two stages. (i) Using classical molecular dynamics, we generated states in which carboxyl groups are brought to the vicinity of nitrogen atoms within the cytosine rings belonging to the DNA duplex. (ii) From these states, we selected two systems for systematic quantum chemical studies aimed at the analysis of proton-transfer reactions between the carboxyl groups and nitrogen atoms within the cytosine rings. Results of molecular dynamics calculations led to the conclusion that sidewall-functionalized carbon nanotubes deliver carboxyl groups slightly more effectively than the on-tip-functionalized ones. The latter can provide carboxyl groups in various arrangements and more diverse quality of approach of carboxyl groups to the cytosines; however, the differences between various arrangements of carboxyl groups are still not big. It was generally observed that narrow nanotubes can access the cytosine pocket easier than wider ones. Quantum chemical calculations led however to the conclusion that a direct proton transfer from the carboxyl group to the nitrogen atom within the cytosine ring is impossible under normal conditions. Precisely, we detected either very high activation barrier for the proton-transfer reaction or instability of the reaction product, i.e., its spontaneous decomposition toward reaction substrates.

An ecologically friendly process for graphene exfoliation based on the "hydrodynamic cavitation on a chip" concept

Tremendous research efforts have recently focused on the synthesis of graphene from graphitic materials, while environmental issues, scalability, and cost are some of the major challenges to be surmounted. Liquid phase exfoliation (LPE) of graphene is one of the principal methods for this synthesis. Nevertheless, sufficient information about the mechanisms of exfoliation has yet to emerge. Here, a microreactor based on the hydrodynamic cavitation (HC) on a chip concept is introduced to exfoliate graphite in a totally green process which involves only natural graphite flakes and water. HC-treated graphitic materials were characterized by UV-Vis and Raman spectroscopy, DLS (Dynamic Light Scattering), AFM (Atomic Force Microscopy), and SEM (Scanning Electron Microscopy) analyses. The present sustainable reactor system was found to exfoliate thick and large graphite particles to nano-sized sheets (∼1.2 nm) with a lateral size of ∼500 nm to 5 μm.

LPE of graphene with a hydrodynamic cavitation microreactor is a totally green process which involves only natural graphite flakes and water.

Versatile Functionalization of Carbon Nanomaterials by Ferrate(VI)

As a high-valent iron compound with Fe in the highest accessible oxidation state, ferrate(VI) brings unique opportunities for a number of areas where chemical oxidation is essential. Recently, it is emerging as a novel oxidizing agent for materials chemistry, especially for the oxidation of carbon materials. However, the reported reactivity in liquid phase (H2SO4 medium) is confusing, which ranges from aggressive to moderate, and even incompetent. Meanwhile, the solid-state reactivity underlying the "dry" chemistry of ferrate(VI) remains poorly understood. Herein, we scrutinize the reactivity of K2FeO4 using fullerene C60 and various nanocarbons as substrates. The results unravel a modest reactivity in liquid phase that only oxidizes the active defects on carbon surface and a powerful oxidizing ability in solid state that can open the inert C=C bonds in carbon lattice. We also discuss respective benefit and limitation of the wet and dry approaches. Our work provides a rational understanding on the oxidizing ability of ferrate(VI) and can guide its application in functionalization/transformation of carbons and also other kinds of materials.

Nanoscale Patterning of Carbon Nanotubes: Techniques, Applications, and Future

Carbon nanotube (CNT) devices and electronics are achieving maturity and directly competing or surpassing devices that use conventional materials. CNTs have demonstrated ballistic conduction, minimal scaling effects, high current capacity, low power requirements, and excellent optical/photonic properties; making them the ideal candidate for a new material to replace conventional materials in next-generation electronic and photonic systems. CNTs also demonstrate high stability and flexibility, allowing them to be used in flexible, printable, and/or biocompatible electronics. However, a major challenge to fully commercialize these devices is the scalable placement of CNTs into desired micro/nanopatterns and architectures to translate the superior properties of CNTs into macroscale devices. Precise and high throughput patterning becomes increasingly difficult at nanoscale resolution, but it is essential to fully realize the benefits of CNTs. The relatively long, high aspect ratio structures of CNTs must be preserved to maintain their functionalities, consequently making them more difficult to pattern than conventional materials like metals and polymers. This review comprehensively explores the recent development of innovative CNT patterning techniques with nanoscale lateral resolution. Each technique is critically analyzed and applications for the nanoscale-resolution approaches are demonstrated. Promising techniques and the challenges ahead for future devices and applications are discussed.

A tool box to ascertain the nature of doping and photoresponse in single-walled carbon nanotubes

The effect of doping on the electronic properties in bulk single-walled carbon nanotube (SWCNT) samples is studied for the first time using a new in situ Raman spectroelectrochemical method, and further verified by DFT calculations and photoresponse. We use p-/n-doped SWCNTs prepared by diazonium reactions as a versatile chemical strategy to control the SWCNT behavior. The measured and calculated data testify an acceptor effect of 4-aminobenzenesulfonic acid (p-doping), and a donor effect (n-doping) in the case of benzyl alcohol. In addition, pristine and covalently functionalized SWCNTs were used for the preparation of photoactive film electrodes. The photocathodic current in the photoelectrochemical cell is consistently modulated by the doping group. These results validate the in situ Raman spectroelectrochemistry as a unique tool box for predicting the electronic properties of functionalized SWCNTs in the form of thin films and their operational functionality in thin film devices for future optoelectronic applications.

Biaryl synthesis with arenediazonium salts: cross-coupling, CH-arylation and annulation reactions

The rich legacy of arenediazonium salts in the synthesis of unsymmetrical biaryls, built around the seminal works of Pschorr, Gomberg and Bachmann more than a century ago, continues to make important contributions at various evolutionary stages of modern biaryl synthesis. Based on in-depth mechanistic analysis and design of novel pathways and reaction conditions, the scope of biaryl synthesis with arenediazonium salts has enormously expanded in recent years through applications of transition metal/photoredox-catalysed cross-coupling, thermal/photosensitized radical chain CH-arylation of (hetero)arenes and arylative radical annulation reactions with alkynes. These recent developments have provided facile synthetic access to a wide variety of unsymmetrical biaryls of pharmaceutical, agrochemical and optoelectronic importance with green scale-up options and created opportunities for late-stage modification of peptides, nucleosides, carbon nanotubes and electrodes, the details of which are captured in this review.

Depleting Depletion: Maintaining Single-Walled Carbon Nanotube Dispersions after Graft-To Polymer Functionalization

Grafting polymers onto single-walled carbon nanotubes (SWCNTs) usefully alters properties but does not typically yield stable, solvated species directly. Despite the expectation of steric stabilization, a damaging (re)dispersion step is usually necessary. Here, poly(vinyl acetate)s (PVAc's) of varying molecular weights are grafted to individualized, reduced SWCNTs at different concentrations to examine the extent of reaction and degree of solvation. The use of higher polymer concentrations leads to an increase in grafting ratio (weight fraction of grafted polymer relative to the SWCNT framework), approaching the limit of random sequentially adsorbed Flory "mushrooms" on the surface. However, at higher polymer concentrations, a larger percentage of SWCNTs precipitate during the reaction; an effect which is more significant for larger weight polymers. The precipitation is attributed to depletion interactions generated by ungrafted homopolymer overcoming Coulombic repulsion of adjacent like-charged SWCNTs; a simple model is proposed. Larger polymers and greater degrees of functionalization favor stable solvation, but larger and more concentrated homopolymers increase depletion aggregation. By using low concentrations (25 μM) of larger molecular weight PVAc (10 kDa), up to 65% of grafted SWCNTs were retained in solution (at 65 μg mL^-1) directly after the reaction.

Reversible dispersion and precipitation of single-walled carbon nanotubes using a pH-responsive rigid surfactant

Sonication is not required to re-disperse the precipitated SWNTs in a pH-responsive SWNTs dispersion using a rigid surfactant.

Reductive dissolution of supergrowth carbon nanotubes for tougher nanocomposites by reactive coagulation spinning

Long single-walled carbon nanotubes, with lengths >10 μm, can be spontaneously dissolved by stirring in a sodium naphthalide N,N-dimethylacetamide solution, yielding solutions of individualised nanotubide ions at concentrations up to 0.74 mg mL^-1. This process was directly compared to ultrasonication and found to be less damaging while maintaining greater intrinsic length, with increased individualisation, yield, and concentration. Nanotubide solutions were spun into fibres using a new reactive coagulation process, which covalently grafts a poly(vinyl chloride) matrix to the nanotubes directly at the point of fibre formation. The grafting process insulated the nanotubes electrically, significantly enhancing the dielectric constant to 340% of the bulk polymer. For comparison, samples were prepared using both Supergrowth nanotubes and conventional shorter commercial single-walled carbon nanotubes. The resulting nanocomposites showed similar, high loadings (ca. 20 wt%), but the fibres formed with Supergrowth nanotubes showed significantly greater failure strain (up to ∼25%), and hence more than double the toughness (30.8 MJ m^-3), compared to composites containing typical ∼1 μm SWCNTs.

Chemical routes to discharging graphenides

Chemical and electrochemical reduction methods allow the dispersion, processing, and/or functionalization of discrete sp²-hybridised nanocarbons, including fullerenes, nanotubes and graphenes. Electron transfer to the nanocarbon raises the Fermi energy, creating nanocarbon anions and thereby activating an array of possible covalent reactions. The Fermi level may then be partially or fully lowered by intended functionalization reactions, but in general, techniques are required to remove excess charge without inadvertent covalent reactions that potentially degrade the nanocarbon properties of interest. Here, simple and effective chemical discharging routes are demonstrated for graphenide polyelectrolytes and are expected to apply to other systems, particularly nanotubides. The discharging process is inherently linked to the reduction potentials of such chemical discharging agents and the unusual fundamental chemistry of charged nanocarbons.

Solubility origin at the nanoscale: enthalpic and entropic contributions in polar and nonpolar environments

Nanostructures are known to be poorly soluble, irrespective of their elemental composition, shape, electronic structure, dipole moment, hydrophobicity/hydrophilicity and the employed solvent. The methods of colloid chemistry allow for preparing suspensions - metastable systems, the stabilities of which differ greatly from one another - but not real solutions. A systematic investigation of the solubility origin at the nanoscale is hereby reported in terms of its fundamental constituents: enthalpy and entropy. Slightly different one-dimensional solutes - narrow carbon nanotubes (CNTs) of different lengths - were considered in hydrophilic (water) and hydrophobic (benzene) environments. We decompose the process of solvation into the solid → gas transition (sublimation) and the gas → liquid transition (condensation). Sublimation is a thermodynamically unfavorable process under room conditions, while the condensation transition depends on the solvent-solute interactions (enthalpic contribution). Unlike solvation of small molecules, solvation of the nanostructures results in a significant alteration of entropy. This alteration is proportional to the linear dimensions of the nanostructure. If the solvent exhibits peculiar solvent-solvent interactions (such as hydrogen bonding in water), solvation is entropically forbidden, irrespective of the solute nature and its nanoscale dimensions. In the case of the hydrophobic solvent (benzene), the condensation transition can be both enthalpically and entropically favorable. The free energy of solvation is in direct proportion to the CNT length. While highlighting principal difficulties in solvating nanostructures, this paper discusses an optimal choice of solvents for solutes exhibiting hydrophobic and hydrophilic interactions with their environments. Our results allow us to predict the solvation of an arbitrary nanostructure using its small, about 2 nm, atomistic model.

Gas sensing at the nanoscale: engineering SWCNT-ITO nano-heterojunctions for the selective detection of NH3 and NO2 target molecules

The gas response of single-wall carbon nanotubes (SWCNT) functionalized with indium tin oxide (ITO) nanoparticles (NP) has been studied at room temperature and an enhanced sensitivity to ammonia and nitrogen dioxide is demonstrated. The higher sensitivity in the functionalized sample is related to the creation of nano-heterojunctions at the interface between SWCNT bundles and ITO NP. Furthermore, the different response of the two devices upon NO₂ exposure provides a way to enhance also the selectivity. This behavior is rationalized by considering a gas sensing mechanism based on the build-up of space-charge layers at the junctions. Finally, full recovery of the signal after exposure to NO₂ is achieved by UV irradiation for the functionalized sample, where the ITO NP can play a role to hinder the poisoning effects on SWCNT due to NO₂ chemisorption.

Near infrared photoluminescence modulation by defect site design using aryl isomers in locally functionalized single-walled carbon nanotubes

Unexpected near infrared photoluminescence of locally-functionalized single-walled carbon nanotubes upon introducing isomeric structures in the defect sites is reported.

Current Progress in the Chemical Vapor Deposition of Type-Selected Horizontally Aligned Single-Walled Carbon Nanotubes

Exciting electrical properties of single-walled carbon nanotubes show promise as a future class of electronic materials, yet the manufacturing challenges remain significant. The key challenges are to determine fabrication approaches for complex and flexible arrangements of nanotube devices that are reliable, rapid, and reproducible. Realizing regular array structures is an important step toward this goal. Considerable efforts have and are being made in this vein, although the progress to date is somewhat modest. However, there are reasons to be optimistic. Positive steps of being able to control not only the spatial location and diameter of the tubes but also their electronic type (chiral control) are being made. Two primary approaches are being exploited to address the challenges. Tube deposition techniques, on the one hand, and direct growth of the desired tube at the target location are being explored. While this review covers both approaches, the emphasis is on recent developments in the direct fabrication of type-selected horizontally aligned single-walled carbon nanotubes by chemical vapor deposition.

Contrast agents for molecular photoacoustic imaging

Photoacoustic imaging (PAI) is an emerging tool that bridges the traditional depth limits of ballistic optical imaging and the resolution limits of diffuse optical imaging. Using the acoustic waves generated in response to the absorption of pulsed laser light, it provides noninvasive images of absorbed optical energy density at depths of several centimeters with a resolution of ∼100 μm. This versatile and scalable imaging modality has now shown potential for molecular imaging, which enables visualization of biological processes with systemically introduced contrast agents. Understanding the relative merits of the vast range of contrast agents available, from small-molecule dyes to gold and carbon nanostructures to liposome encapsulations, is a considerable challenge. Here we critically review the physical, chemical and biochemical characteristics of the existing photoacoustic contrast agents, highlighting key applications and present challenges for molecular PAI.

Reductively PEGylated carbon nanomaterials and their use to nucleate 3D protein crystals: a comparison of dimensionality

A range of carbon nanomaterials, with varying dimensionality, were dispersed by a non-damaging and versatile chemical reduction route, and subsequently grafted by reaction with methoxy polyethylene glycol (mPEG) monobromides. The use of carbon nanomaterials with different geometries provides both a systematic comparison of surface modification chemistry and the opportunity to study factors affecting specific applications. Multi-walled carbon nanotubes, single-walled carbon nanotubes, graphite nanoplatelets, exfoliated few layer graphite and carbon black were functionalized with mPEG-Br, yielding grafting ratios relative to the nanocarbon framework between ca. 7 and 135 wt%; the products were characterised by Raman spectroscopy, TGA-MS, and electron microscopy. The functionalized materials were tested as nucleants by subjecting them to rigorous protein crystallization studies. Sparsely functionalized flat sheet geometries proved exceptionally effective at inducing crystallization of six proteins. This new class of nucleant, based on PEG grafted graphene-related materials, can be widely applied to promote the growth of 3D crystals suitable for X-ray crystallography. The association of the protein ferritin with functionalized exfoliated few layer graphite was directly visualized by transmission electron microscopy, illustrating the formation of ordered clusters of protein molecules critical to successful nucleation.

Carbon nanotube anions for the preparation of gold nanoparticle–nanocarbon hybrids

This methodology highlights the unusual chemistry of negatively charged carbon nanotubes and provides a blueprint for the generation of hybrid nanomaterials.

Near infrared photoluminescence modulation of single-walled carbon nanotubes based on a molecular recognition approach

The molecular recognition approach has achieved near infrared photoluminescence modulation on locally-functionalized single-walled carbon nanotubes.

Chemical reactions confined within carbon nanotubes

The confinement of molecules and catalysts inside carbon nanotubes affects the yield and distribution of products of preparative chemical reactions.

Imidazolium functionalized carbon nanotubes for the synthesis of cyclic carbonates: reducing the gap between homogeneous and heterogeneous catalysis

Single walled carbon nanotubes were functionalized with imidazolium based salts and successfully used as catalysts for the conversion of CO₂. The novel materials displayed excellent catalytic activity.

Carbon nanotubides: an alternative for dispersion, functionalization and composites fabrication

In this review, we systematically describe the state-of-knowledge in the area of carbon nanotubides (CNTDs). CNTDs can be used for achieving highly concentrated dispersions of SWCNTs and can also be used as an important intermediate for covalent chemical modification. In recent years, researchers have used SWCNTDs as starting materials for the functionalization of SWCNTs with functionalities such as alkyl chains, carboxylic acids, sulfide, amino, hydroxyl, silyl, bromide, ethers, ketones and polymers. Also, we discussed the observed selectivity on the covalent functionalization towards certain classes of CNTs. Finally, we describe the use of SWCNTDs in the manufacture of fibers, films and other functional materials.

Sonochemical degradation of N-methylpyrrolidone and its influence on single walled carbon nanotube dispersion

Sonicating pure N-methyl pyrrolidone (NMP) rapidly produces contaminating organic nanoparticles, at increasing concentration with time, as investigated by AFM, as well as UV-vis, IR and NMR spectroscopies. The contamination issue affects carbon nanotube, and likely other nanomaterial, dispersions processed by sonication in organic solvents.

A one-step route to solubilised, purified or functionalised single-walled carbon nanotubes

Reductive dissolution is a promising processing route for single walled carbon nanotubes (SWCNTs) that avoids the damage caused by ultrasonication and aggressive oxidation whilst simultaneously allowing access to a wealth of SWCNT functionalisation reactions. Here, reductive dissolution has been simplified to a single one-pot reaction through the use of sodium naphthalide in dimethylacetamide allowing direct synthesis of SWCNT Na+ solutions. Gram quantities of SWCNTs can be dissolved at concentrations over 2 mg mL-1. These reduced SWCNT solutions can easily be functionalised through the addition of alkyl halides; reducing steric bulk of the grafting moiety and increasing polarisability of the leaving group increases the extent of functionalisation. An optimised absolute sodium concentration of 25 mM is shown to be more important than carbon to metal ratio in determining the maximum degree of functionalisation. This novel dissolution system can be modified for use as a non-destructive purification route for raw SWCNT powder by adjusting the degree of charging to dissolve carbonaceous impurities, catalyst particles and defective material, before processing the remaining SWCNTs.

Selective distributions of functionalized single-walled carbon nanotubes in a polymeric reverse hexagonal phase

We have investigated the distributions of individually isolated and hydrophilically functionalized single-walled carbon nanotubes (p-SWNTs) in the Pluronic L121-water system at the reverse hexagonal phase using small-angle X-ray scattering (SAXS) and contrast-matched small-angle neutron scattering (SANS) measurements. As the p-SWNT-L121-water system is transitioned from the lamellar phase to the reverse hexagonal phase with temperature, p-SWNTs which were selectively distributed in the polar layers of the lamellar structure become selectively distributed in the cylindrical polar cores of the reverse hexagonal structure, forming a hexagonal array of p-SWNTs. This was clearly confirmed by the contrast-matched SANS measurements. The selective distribution of p-SWNTs in the reverse hexagonal phase is driven by the selective affinity of p-SWNTs to the polar domains of the block copolymer system. The method demonstrated in this study provides a new route for fabricating ordered SWNT superstructures and may be applicable for inorganic 1D nanoparticles such as semiconducting, metallic and magnetic nanorods which are of great interest.

Electroactive carbon nanoforms: a comparative study via sequential arylation and click chemistry reactions

The reactivity of several carbon nanoforms (CNFs), single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs) and graphene, has been investigated through a combination of arylation and click chemistry Cu(I)-mediated azide-alkyne cycloaddition (CuAAC) reactions. The approach is based on the incorporation of electroactive π-extended tetrathiafulvalene (exTTF) units into the triazole linkers to modulate the electronic properties of the obtained conjugates. The introduction of strain, by bending the planar graphene sheet into a 3D carbon framework, is responsible for the singular reactivity observed in carbon nanotubes. The formed nanoconjugates were fully characterized by analytical, spectroscopic, and microscopic techniques (TGA, FTIR, Raman, UV-Vis-NIR, cyclic voltammetry, TEM and XPS). In the case of SWCNT conjugates, where the functionalization degree is higher, a series of steady-state and time resolved spectroscopy experiments revealed a photoinduced electron transfer from the exTTF unit to the electron-accepting SWCNT.

Sensing properties of light-emitting single walled carbon nanotubes prepared via click chemistry of ylides bound to the nanotube surface

Fluorescent single walled carbon nanotube-mediated sensors with a detection limit of ∼10⁻⁸ M for nitrophenol based chemical warfare agents and environmental pollutants.

Recent progress in theoretical and computational investigations of Li-ion battery materials and electrolytes

Advancements and progress in computational and theoretical investigations of Li-ion battery materials and electrolytes are reviewed and assessed.

A short designed semi-aromatic organic nanotube--synthesis, chiroptical characterization, and host properties

The first generation of an organic nanotube based on the enantiomerically pure bicyclo[3.3.1]nonane framework is presented. The helical tube synthesised is the longest to date having its aromatic systems oriented parallel to the axis of propagation (length ∼26 Å and inner diameter ∼11 Å according to molecular dynamics simulations in chloroform). The synthesis of the tube, a heptamer, is based on a series of Friedländer condensations and the use of pyrido[3,2-d]pyrimidine units as masked 2-amino aldehydes, as a general means to propagate organic tubular structures and the introduction of a methoxy group for modification toward solubility and functionalization are described. The electronic CD spectra of the tube and molecular intermediates are correlated with theoretical spectra calculated with time-dependent density functional theory to characterize the chirality of the tube. Both experimental (NMR-titrations) and theoretical (molecular dynamics simulations) techniques are used to investigate the use of the tube as a receptor for the acetylcholine and guanidinium cations, respectively.