Formation of nanostructured porous Cu-Au surfaces: the influence of cationic sites on (electro)-catalysis

Nitrate electroreduction to ammonia catalysed by atomically precise Au28Cu12 clusters

A novel bimetal cluster [Au28Cu12(SR)24](PPh4)4 (SR = 2,4-dichlorothiophenol) has been successfully synthesized, which can be viewed as a Au4@Au24 core and four trimeric Cu3(SR)6 staples. Compared to monometallic Au28(TBBT)20 and Cu28(CHT)18(PPh3)3 clusters, the [Au28Cu12(C6H4Cl2S)24](PPh4)4 cluster has much higher catalytic efficiency for nitrate electroreduction to ammonia.

Self-Supporting Nanoporous Copper Film with High Porosity and Broadband Light Absorption for Efficient Solar Steam Generation

Solar steam generation (SSG) is a potential technology for freshwater production, which is expected to address the global water shortage problem. Some noble metals with good photothermal conversion performance have received wide concerns in SSG, while high cost limits their practical applications for water purification. Herein, a self-supporting nanoporous copper (NP-Cu) film was fabricated by one-step dealloying of a specially designed Al98Cu2 precursor with a dilute solid solution structure. In-situ and ex-situ characterizations were performed to reveal the phase and microstructure evolutions during dealloying. The NP-Cu film shows a unique three-dimensional bicontinuous ligament-channel structure with high porosity (94.8%), multi scale-channels and nanoscale ligaments (24.2 ± 4.4 nm), leading to its strong broadband absorption over the 200-2500 nm wavelength More importantly, the NP-Cu film exhibits excellent SSG performance with high evaporation rate, superior efficiency and good stability. The strong desalination ability of NP-Cu also manifests its potential applications in seawater desalination. The related mechanism has been rationalized based upon the nanoporous network, localized surface plasmon resonance effect and hydrophilicity.

3D-Structured Au(NiMo)/Ti Catalysts for the Electrooxidation of Glucose

In this study, 3D-structured NiMo coatings have been constructed via the widely used electrodeposition method on a Ti surface and decorated with very small Au crystallites by galvanic displacement (Au(NiMo)/Ti). The catalysts have been characterized using scanning electron microscopy, energy dispersive X-ray analysis, and inductively coupled plasma optical emission spectroscopy. Different Au(NiMo)/Ti catalysts, which had Au loadings of 1.8, 2.3, and 3.9 µgAu cm−2, were prepared. The electrocatalytic activity of the Au(NiMo)/Ti catalysts was examined with respect to the oxidation of glucose in alkaline media by cyclic voltammetry. It was found that the Au(NiMo)/Ti catalysts with Au loadings in the range of 1.8 up to 3.9 µgAu cm−2 had a higher activity compared to that of NiMo/Ti. A direct glucose-hydrogen peroxide (C6H12O6-H2O2) single fuel cell was constructed with the different Au-loading-containing Au(NiMo)/Ti catalysts as the anode and Pt as the cathode. The fuel cells exhibited an open circuit voltage of ca. 1.0 V and peak power densities up to 8.75 mW cm−2 at 25 °C. The highest specific peak power densities of 2.24 mW µgAu−1 at 25 °C were attained using the Au(NiMo)/Ti catalyst with the Au loading of 3.9 µg cm−2 as the anode.

Covalent Modification of Iron Phthalocyanine into Skeleton of Graphitic Carbon Nitride and Its Visible-Light-Driven Photocatalytic Reduction of Nitroaromatic Compounds

It is of great urgency to eliminate nitroaromatic compounds (NACs) in wastewater due to their high residue and toxicity. Photocatalysis reduction is considered to be an efficient technology for converting NACs to their corresponding aromatic amines. In this work, a visible-light-driven hybrid photocatalyst was synthesized by covalently doping Fe phthalocyanine (FePc) into graphitic carbon nitride skeleton. Compared to the pristine gCN, the optimized gCN-FePc-1 photocatalyst showed enhanced absorption in visible light region, which promoted photogenerated charge transfer and separation. Using p-nitrophenol (p-NP) as the model pollutant, the CN-FePc-1 effectively reduced it to p-aminophenol (p-AP), with the photocatalytic reaction rate being 18 and 3 times higher, respectively, than those of the pristine gCN and the mechanically mixed photocatalyst of gCN/FePc. Moreover, excellent photocatalytic universality for other NACs, high stability, and good reusability also were confirmed. Based on the band structure of the gCN-FePc-1 photocatalyst, a plausible mechanism was proposed to illustrate the photocatalytic reduction process of p-NP to p-AP. This study demonstrates that the covalent modification of FePc into gCN skeleton is an effective strategy to modulate the electronic structure, and the hybrid gCN-FePc is a potential visible-light-driven photocatalyst that potentially can be used for eliminating NAC contamination in wastewater.

Hierarchically Structured Black Gold Film with Ultrahigh Porosity for Solar Steam Generation

Plasmonic metals demonstrate significant potential for solar steam generation (SSG) because of their localized surface plasmon resonance effect. However, the inherently narrow absorption spectra of plasmonic metals significantly limit their applications. The fabrication of nanostructures is essential to achieve broadband solar absorption for high-efficiency vapor generation. Herein, a self-supporting black gold (Au) film with an ultrahigh porosity and a hierarchically porous structure is fabricated by formulating an extremely dilute Cu₉₉ Au₁ precursor and controlling the dealloying process. In situ and ex situ characterizations reveal the dealloying mechanism of Cu₉₉ Au₁ in a 1 m HNO₃ solution as that involving the phase transformation of Cu(Au) → Au(Cu) → Au, giant volume shrinkage (≈87%), structural evolution/coarsening of ligaments, and development of ultrahigh porosity (86.2%). The multiscale structure, consisting of ultrafine nanoporous nanowires, aligned nanogaps, and various microgaps, provide efficient broadband absorption over 300-2500 nm, excellent hydrophilicity, and continuous water transport. In particular, the nanoporous black Au film shows high SSG performance with an evaporation rate of 1.51 kg m^-2 h^-1 and a photothermal conversion efficiency of 94.5% under a light intensity of 1 kW m^-2 . These findings demonstrate that the nanoporous Au film has great potential for clean water production and seawater desalination.

Phenanthroline bridging graphitic carbon nitride framework and Fe (II) ions to promote transfer of photogenerated electrons for selective photocatalytic reduction of Nitrophenols

Nitrophenols (NPs) are widely used in industries and highly toxic to ecological environment and human health. Because aminophenols (APs) are important chemicals, catalytic reduction of NPs via efficient and environment-friendly strategies is of great importance. Herein, we developed a green photocatalysis route to efficiently convert NPs to APs using a Fe (II) modified graphitic carbon nitride (g-C₃N₄) photocatalyst, where phenanthroline units were employed to bridge Fe (II) and carbon nitride framework. The optimized sample P-CN-8-Fe presented significantly improved absorption of visible light, separation of photogenerated charges and carrier transportation in comparison with the pristine g-C₃N₄ and the modified samples of CN-Fe and P-CN-8. Accordingly, the P-CN-8-Fe showed a high conversion (97%) of p-nitrophenol (p-NP) to p-aminophenol (p-AP) under 2 h visible light irradiation, and meanwhile possessed high photocatalytic durability. Its high activity was also demonstrated through photocatalytic reduction of other NPs and nitrobenzene compounds. Finally, a possible mechanism was proposed for the photocatalytic reduction of p-NP by P-CN-8-Fe. This work provides an effective approach to prepare Fe (II) modified g-C₃N₄ through the bridging effect of phenanthroline group, which is a potential visible light driven photocatalyst for reduction of nitrobenzene derivatives.

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe-Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm^-2 at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec^-1 for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm^-2 due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂ O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.

Gas Bubbles in Electrochemical Gas Evolution Reactions

Electrochemical gas evolution reactions are of vital importance in numerous electrochemical processes including water splitting, chloralkaline process, and fuel cells. During gas evolution reactions, gas bubbles are vigorously and constantly forming and influencing these processes. In the past few decades, extensive studies have been performed to understand the evolution of gas bubbles, elucidate the mechanisms of how gas bubbles impact gas evolution reactions, and exploit new bubble-based strategies to improve the efficiency of gas evolution reactions. In this feature article, we summarize the classical theories as well as recent advancements in this field and provide an outlook on future research topics.

Synergistic effects of multi-active sites in silver modified Bi°-BiVO4 toward efficient reduction of aromatic nitrobenzene

In this work, we report on the preparation of silver nanoparticles modified bismuth/bismuth vanadate (Bi°-BiVO₄) catalyst with multi-active sites toward efficient reduction of aromatic nitrobenzene, aiming to tailor the synergistic effects of multi-active sites and specify the underlying catalytic mechanism. The as-prepared catalysts were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray and X-ray photoelectron spectroscopy. It is observed that Ag nanoparticles with diameter of ˜30 nm were anchored evenly on the surface of rod-shaped BiVO₄, which offered multi-active sites to contact with the reactants effectively and transfer interfacial electron to 4-nitrophenol (4-NP) rapidly. The activity factor k of Ag/Bi°-BiVO₄ for 4-NP reduction is estimated to ˜3933.4 min^-1 g^-1, which is much higher than that obtained from pristine BiVO₄ catalyst, Bi° and noble metal Ag nanoparticles. According to the experimental results, the reaction mechanism and reaction path of 4-NP reduction for BiVO₄, Bi and Ag were studied through the density functional theory (DFT) theoretical calculation, which suggested that they exhibit synergistic catalytic effect in the reaction process. This work may provide a feasible foundation for the mechanism research of semiconductor reduction to 4-nitrophenol.

Galvanic Replacement of Electrochemically Restructured Copper Electrodes with Gold and Its Electrocatalytic Activity for Nitrate Ion Reduction

The electrochemical formation of nanostructured materials is a cost effective route to creating substrates that can be employed in a variety of applications. In this work the surface of a copper electrode was electrochemically restructured in an alkaline solution containing ethanol as an additive to modify the surface morphology, and generate a Cu/Cu₂O surface, which is known to be active for the electrocatalytic reduction of environmentally harmful nitrate ions. To increase the activity of the nanostructured surface it was decorated with gold prisms through a facile galvanic replacement approach to create an active Cu/Cu₂O/Au layer. The surface was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, as well as electrochemical techniques. It was found that the presence of recalcitrant oxides, and Au was beneficial for the increased activity compared to unmodified copper and undecorated restructured copper and was consistent with the incipient hydrous oxide adatom mediator model of electrocatalysis. This approach to generating nanostructured metal/metal oxide surfaces that can be galvanically replaced to create these types of composites may have other applications in the area of electrocatalysis.

Promotional effect of Fe on the performance of supported Cu catalyst for ambient pressure hydrogenation of furfural

A noble-metal free FeCu based bimetallic catalyst system prepared by facile co-impregnation method was found to be a highly admirable for vapour phase selective hydrogenation of furfural to furfuryl alcohol at ambient pressure.

Ambient Filtration Method To Rapidly Prepare Highly Conductive, Paper-Based Porous Gold Films for Electrochemical Biosensing

Thin gold films offer intriguing material properties for potential applications including fuel cells, supercapacitors, and electronic and photonic devices. We describe here an ambient filtration method that provides a simple and novel way to generate rapidly porous and thin gold films without the need for sophisticated instruments, clean-room environments, and any postgrowth process or sintering steps. Using this approach, we can fabricate highly conductive gold films composed of gold nanoparticles layered atop a matrix of metallic single-walled carbon nanotubes on mixed cellulose ester filter paper within 20 min. These hybrid films (thickness ∼40 nm) exhibit fast electron transfer and excellent electrocatalytic properties that are similar to purchased gold films, but with a larger electroactive surface that lends itself to more sensitive analyte detection. We used the neurotransmitters dopamine and serotonin as benchmark analytes to demonstrate that our hybrid gold films can clearly discriminate the presence of both molecules in a mixture with resolution that greatly exceeds that of either purchased gold slides or electrodeposited gold films. Importantly, we postulate that this new approach could readily be generalized for the rapid fabrication of films from various other metals under ambient conditions, and could also be used as a prelude to transferring the resulting films onto glass or other flexible substrates.

Building with bubbles: the formation of high surface area honeycomb-like films via hydrogen bubble templated electrodeposition

While the evolution of hydrogen gas is often a troublesome process accompanying electrodeposition, this feature can be exploited to template the growth of highly porous surfaces. This process, known as the dynamic hydrogen bubble template (DHBT) method, can be utilised to create a wide range of macroporous films with nanostructured pore walls. This feature article presents an overview of the status of the DHBT technique, highlighting preparation techniques and emerging applications.

Generation of catalytically active materials from a liquid metal precursor

A facile route to prepare catalytically active materials from a liquid metal alloy is introduced. Sonication of liquid galinstan (GaInSn) in alkaline solution or treating it with reducing agents generates In : Sn rich microspheres that are catalytically active for electron transfer reactions such as potassium ferricyanide and 4-nitrophenol reduction.

Photo-synergistic promoted in situ generation of Bi0–BiSbO4 nanostructures as an efficient catalyst for nitrobenzene reduction

This work reports on the construction of Bi⁰–BiSbO₄ nanostructures to show photo-synergistic and efficient catalytic activity toward nitrobenzenes reduction.

From single crystal surfaces to single atoms: investigating active sites in electrocatalysis

Electrocatalytic processes will undoubtedly be at the heart of energising future transportation and technology with the added importance of being able to create the necessary fuels required to do so in an environmentally friendly and cost effective manner. For this to be successful two almost mutually exclusive surface properties need to be reconciled, namely producing highly active/reactive surface sites that exhibit long term stability. This article reviews the various approaches which have been undertaken to study the elusive nature of these active sites on metal surfaces which are considered as adatoms or clusters of adatoms with low coordination number. This includes the pioneering studies at extended well defined stepped single crystal surfaces using cyclic voltammetry up to the highly sophisticated in situ electrochemical imaging techniques used to study chemically synthesised nanomaterials. By combining the information attained from single crystal surfaces, individual nanoparticles of defined size and shape, density functional theory calculations and new concepts such as mesoporous multimetallic thin films and single atom electrocatalysts new insights into the design and fabrication of materials with highly active but stable active sites can be achieved. The area of electrocatalysis is therefore not only a fascinating and exciting field in terms of realistic technological and economical benefits but also from the fundamental understanding that can be acquired by studying such an array of interesting materials.