Fabrication of Sacha Inchi Oil-Loaded Microcapsules Employing Natural-Templated Lycopodium clavatum Spores and Their Pressure-Stimuli Release Behavior

Polymeric particles have attracted vast attention for use in various fields, especially as drug carriers and cosmetics, due to their excellent ability to protect active ingredients from the environment until reaching a target site. However, these materials are commonly produced from conventional synthetic polymers, which impose adverse effects on the environment due to their non-degradable nature, leading to waste accumulation and pollution in the ecosystem. This work aims to utilize naturally occurring Lycopodium clavatum spores to encapsulate sacha inchi oil (SIO), which contains active compounds with antioxidant activity, by applying a facile passive loading/solvent diffusion-assisted method. Sequential chemical treatments by acetone, potassium hydroxide, and phosphoric acid were employed to remove native biomolecules from the spores before encapsulation effectively. These are mild and facile processes compared to other synthetic polymeric materials. Scanning electron microscopy and Fourier-transform infrared spectroscopy revealed the clean, intact, and ready-to-use microcapsule spores. After the treatments, the structural morphology of the treated spores remained significantly unchanged compared to the untreated counterparts. With an oil/spore ratio of 0.75:1.00 (SIO@spore-0.75), high encapsulation efficiency and capacity loading values of 51.2 and 29.3%, respectively, were obtained. Using antioxidant assay (DPPH), the IC₅₀ of SIO@spore-0.75 was 5.25 ± 3.04 mg/mL, similar to that of pure SIO (5.51 ± 0.31 mg/mL). Under pressure stimuli (1990 N/cm³, equivalent to a gentle press), a high amount of SIO was released (82%) from the microcapsules within 3 min. At an incubation time of 24 h, cytotoxicity tests showed a high cell viability of 88% at the highest concentration of the microcapsules (10 mg/mL), reflecting biocompatibility. The prepared microcapsules have a high potential for cosmetic applications, especially as functional scrub beads in facial washing products.

Sporopollenin-inspired design and synthesis of robust polymeric materials

Sporopollenin is a mechanically robust and chemically inert biopolymer that constitutes the outer protective exine layer of plant spores and pollen grains. Recent investigation of the molecular structure of pine sporopollenin revealed unique monomeric units and inter-unit linkages distinct from other previously known biopolymers, which could be harnessed for new material design. Herein, we report the bioinspired synthesis of a series of sporopollenin analogues. This exercise confirms large portions of our previously proposed pine sporopollenin structural model, while the measured chemical, thermal, and mechanical properties of the synthetic sporopollenins constitute favorable attributes of a new kind of robust material. This study explores a new design framework of robust materials inspired by natural sporopollenins, and provides insights and reagents for future elucidation and engineering of sporopollenin biosynthesis in plants.

Different Plant Sporopollenin Exine Capsules and Their Multifunctional Usage

Sporopollenin exine capsules (SECs) are highly resistant to heat and various acids and bases. They are also cheap, highly porous, eco-friendly polymer biomaterials with stable microencapsulation capacity. Due to their strong and uniquely shaped exine layers, they can allow growth on metal oxide materials, as a biotemplate for use in different applications. In this study, first, a single SEC extraction method was applied to three different pollens from Pinus, Fraxinus excelsior, and Tilia. Scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) analysis, and thermogravimetric/differential thermal analysis (TGA/DTA) measurements both before and after the extraction process were performed to observe changes in surface area, morphology, porous structure, and degradation properties. The protein content and removal were analyzed by elemental and spectrophotometric analyses. Then, SECs were loaded by passive and centrifuge loading for drug delivery, and the loading capacities were analyzed by Fourier transform infrared spectroscopy and spectrophotometry. The method was successful in opening the pores and maintaining the structural integrity of SECs. It was determined that the morphology and porosity affected the encapsulation efficiency. According to the loading capacities, Tilia SECs were the most efficient SECs for both loading methods. In addition, three different SECs were hydrothermally coated with cobalt and then heat-treated to obtain a metal oxide structure. A CO₃O₄ supercapacitor electrode constructed using CO₃O₄-F. excelsior SEC powder had the best surface area parameters. The electrode showed a maximum specific capacity of 473 F/g for over 3000 continuous cycles of galvanostatic charge-discharge (GCD).

57Fe-Enrichment effect on the composition and performance of Fe-based O2-reduction electrocatalysts

In this work, we study how the performance and composition of platinum-group metal free catalysts of the Fe–N–C type are affected upon employing ⁵⁷Fe-enriched precursors in their synthesis.

Carboxymethylpachymaran entrapped plant-based hollow microcapsules for delivery and stabilization of β-galactosidase

β-Galactosidase (β-Gal) as a dietary supplement can alleviate symptoms of lactose intolerance. However, β-Gal is deactivated due to the highly acidic conditions and proteases in the digestive tract. In this work, β-Gal was encapsulated into L. clavatum sporopollenin exine capsules (SECs) to fabricate an oral-controlled release system and increase the stability of β-Gal in the digestive tract. The SEC extraction process was optimized. A 3-hour vacuum loading was determined as the optimal loading time. Five different initial ratios of SECs : β-Gal were optimized with the maximum enzyme retention rate reaching 79.40 ± 1.96%. Furthermore, β-Gal-loaded SECs entrapped in carboxymethylpachymaran (CMP) could control the release of β-Gal under simulated gastrointestinal conditions (SGC). The optimal enzyme retention rate reached 65.33 ± 1.46% within 24 h under SGC. Collectively, these results indicated that the entrapped SECs could be used as an effective oral delivery vehicle of β-Gal to improve its performance as a dietary supplement in the digestion of lactose.

New insights and perspectives into biological materials for flexible electronics

Materials based on biological materials are becoming increasingly competitive and are likely to be critical components in flexible electronic devices.

Natural Sunflower Pollen as a Drug Delivery Vehicle

In nature, pollen grains play a vital role for encapsulation. Many pollen species exist which are often used as human food supplements. Dynamic image particle analysis, scanning electron microscopy, and confocal microscopy analysis confirmed the size, structural uniformity, and macromolecular encapsulation in sunflower pollen, paving the way to explore natural pollen grains for the encapsulation of therapeutic molecules.

Eco-friendly streamlined process for sporopollenin exine capsule extraction

Sporopollenin exine capsules (SECs) extracted from Lycopodium clavatum spores are an attractive biomaterial possessing a highly robust structure suitable for microencapsulation strategies. Despite several decades of research into SEC extraction methods, the protocols commonly used for L. clavatum still entail processing with both alkaline and acidolysis steps at temperatures up to 180 °C and lasting up to 7 days. Herein, we demonstrate a significantly streamlined processing regimen, which indicates that much lower temperatures and processing durations can be used without alkaline lysis. By employing CHN elemental analysis, scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), and dynamic image particle analysis (DIPA), the optimum conditions for L. clavatum SEC processing were determined to include 30 hours acidolysis at 70 °C without alkaline lysis. Extending these findings to proof-of-concept encapsulation studies, we further demonstrate that our SECs are able to achieve a loading of 0.170 ± 0.01 g BSA per 1 g SECs by vacuum-assisted loading. Taken together, our streamlined processing method and corresponding characterization of SECs provides important insights for the development of applications including drug delivery, cosmetics, personal care products, and foods.

The removal of organophosphorus pesticides from water using a new amino-substituted calixarene-based magnetic sporopollenin

This study describes the synthesis, characterization and application of a new amino-substituted p-tert-butylcalix[4]arene-based magnetic sporopollenin, Calix-EPPTMS-MS (4), for the removal of two toxic organophosphorus pesticides from water.