Solute Diffusion into Polymer Swollen by Supercritical CO2 by High-Pressure Electron Paramagnetic Resonance Spectroscopy and Chromatography

High-pressure electron paramagnetic resonance (EPR) was used to measure translational diffusion coefficients (D_tr) of a TEMPONE spin probe in poly(D,L-lactide) (PDLLA) and swollen in supercritical CO₂. D_tr was measured on two scales: macroscopic scale (>1 μm), by measuring spin probe uptake by the sample; and microscopic scale (<10 nm), by using concentration-dependent spectrum broadening. Both methods yield similar translational diffusion coefficients (in the range 5-10 × 10^-12 m²/s at 40-60 °C and 8-10 MPa). Swollen PDLLA was found to be homogeneous on the nanometer scale, although the TEMPONE spin probe in the polymer exhibited higher rotational mobility (τ_corr = 6 × 10^-11 s) than expected, based on its D_tr. To measure distribution coefficients of the solute between the swollen polymer and the supercritical medium, supercritical chromatography with sampling directly from the high-pressure vessel was used. A distinct difference between powder and bulk polymer samples was only observed at the start of the impregnation process.

Formation of low melting point binary systems comprising ketoprofen and an amide local anaesthetic

Liquid forms of active pharmaceutical ingredients, ionic liquids (ILs) and deep eutectic mixtures (DEMs), offer several potential benefits in respect to advancing pharmaceutical formulations. The aim of this study was to develop and characterise ILs/DEMs composed of two active molecules: ketoprofen (KET), as the acidic component, and a local anaesthetics (LA), lidocaine (LID), mepivacaine (MEP) or bupivacaine (BUP), which constituted the basic component. A mechanosynthetic approach was successfully applied to obtain LA-KET low melting systems. Composition/temperature phase diagrams were determined by differential scanning calorimetry. The amide LA-KET mixtures showed a eutectic behaviour during heating and formed viscous liquids upon quench cooling. Considering the quench cooled LA-KET mixtures, LA crystallisation was observed only in the LA-rich mixtures. LID, MEP and BUP formed disordered complexes with KET at an approximate 1:2 stoichiometry. Infrared spectroscopy studies revealed that the mixtures were composed mainly of hydrogen bonded acid and base molecules, but small amounts of carboxylate anions were detected. The formation of LA-KET complex not only suppressed the high crystallisation tendency of the LA molecules in the dry state, but also eliminated the crystallisation of KET and LA molecules induced by moisture, as revealed by dynamic vapour sorption studies.

Anticrystal Engineering of Ketoprofen and Ester Local Anesthetics: Ionic Liquids or Deep Eutectic Mixtures?

Ionic liquids (ILs) and deep eutectic mixtures (DEMs) are potential solutions to the problems of low solubility, polymorphism, and low bioavailability of drugs. The aim of this work was to develop and investigate ketoprofen (KET)-based ILs/DEMs containing an ester local anesthetic (LA): benzocaine (BEN), procaine (PRO) and tetracaine (TET) as the second component. ILs/DEMs were prepared via a mechanosynthetic process that involved the mixing of KET with an LA in a range of molar ratios and applying a thermal treatment. After heating above the melting point and quench cooling, the formation of supercooled liquids with Tgs that were dependent on the composition was observed for all KET-LA mixtures with exception of that containing 95 mol% of BEN. The KET-LA mixtures containing either ≥ 60 mol% BEN or 95 mol% of TET showed crystallization to BEN and TET, respectively, during either cooling or second heating. KET decreased the crystallization tendency of BEN and TET and increased their glass-forming ability. The KET-PRO systems showed good glass-forming ability and did not crystallize either during the cooling or during the second heating cycle irrespective of the composition. Infrared spectroscopy and molecular modeling indicated that KET and LAs formed DEMs, but in the KET-PRO systems small quantities of carboxylate anions were present.

A Strategy of Killing Three Birds with One Stone for Cancer Therapy through Regulating the Tumor Microenvironment by H2O2-Responsive Gene Delivery System

Constructing an efficient in vivo gene delivery system has always been extremely challenging. Herein, a highly efficient H₂O₂-responsive in vivo polycationic gene delivery system is developed for the first time. The efficient vector PLL-RT (i.e., polylysine grafted with p-tosyl-l-arginine) is used to mediate plasmid DNA (pDNA) delivery, and H₂O₂-responsive thioketal dipropanedioic acid-modified dextran (TDPAD) is used as a shielding system for effectively coating vector/pDNA polyplexes. The constructed gene delivery system exhibits a prolonged circulatory half-life in vivo and accelerates the accumulation of vector/DNA polyplexes in tumor tissue by the enhanced permeability and retention (EPR) effect. Moreover, this gene delivery system exhibits highly efficient and synergistic antitumor effects through a strategy of killing three birds with one stone. First, upon the arrival of TDPAD/PLL-RT/pDNA [abbreviated as T(PD)] at the tumor site by the EPR effect, TDPAD reacts with excess H₂O₂ in tumor tissue, contributing to the detachment of TDPAD, and PLL-RT then mediates the enhanced endocytosis of pDNA encoding shVEGF and significantly downregulates the expression of vascular endothelial growth factor (VEGF) in tumor tissue, exhibiting an outstanding antitumor effect. Second, the H₂O₂ consumption by TDPAD significantly decreases the H₂O₂ level in tumor tissue, which synergistically suppresses tumor growth. Third, small-molecule product mercaptopropionic acid, generated by the reaction of TDPAD with H₂O₂, can induce cancer cell apoptosis and exert pronounced antitumor efficacy. This polycationic gene delivery system shows negligible toxicity in vitro and in vivo. This strategy provides an ideal platform for constructing an efficient in vivo gene delivery system and has bright prospects for cancer therapy.

Supercritical impregnation for food applications: a review of the effect of the operational variables on the active compound loading

The scCO₂-assisted impregnation process has arisen as an effective method to impregnate solid materials. Its multiple advantages include high diffusion, it allows to obtain free-solvent materials and to operate under low temperatures, which permits to process thermolabile solutes. These characteristics have allowed its application at industrial scale for the impregnation of wood with fungicides and in the last years for textile dyeing. Meanwhile, other numerous applications are still being studied at laboratory scale. One potential field of application corresponds to the food-related industry, which includes the use of scCO₂-assisted impregnation process to develop active materials for food packaging and to generate food-grade materials loaded with nutraceuticals for functional food applications. In this framework, this article summarizes the advantages and the main drawbacks with the scCO₂-assisted impregnation process. The effect of the processing variables of the scCO₂-assisted impregnation process is discussed in terms of the incorporation of active compounds within polymer structures. Including the principles and description of the process and a review of the investigated systems for a better understanding.

An assembly and interaction of upconversion and plasmonic nanoparticles on organometallic nanofibers: enhanced multicolor upconversion, downshifting emission and the plasmonic effect

We present novel inorganic-organic hybrid nanoparticles (HNPs) constituting inorganic NPs, NaY_0.78Er_0.02Yb_0.2F₄, and organometallic nanofiber, Tb(ASA)₃Phen (TAP). X-ray diffraction, Fourier transform infrared absorption and transmission electron microscopy analyses reveal that prepared ultrafine upconversion NPs (UCNPs (5-8 nm)) are dispersed on the surface of the TAP nanofibers. We observe that the addition of TAP in UCNPs effectively limits the surface quenching to boost the upconversion (UC) intensity and enables tuning of UC emission from the green to the red region by controlling the phonon frequency around the Er³⁺ ion. On the other hand, TAP is an excellent source of green emission under ultraviolet exposure. Therefore prepared HNPs not only give enhanced and tunable UC but also emit a strong green color in the downshifting (DS) process. To further enhance the dual-mode emission of HNPs, silver NPs (AgNPs) are introduced. The emission intensity of UC as well as DS emission is found to be strongly modulated in the presence of AgNPs. It is found that AgNPs enhance red UC emission. The possible mechanism involved in enhanced emission intensity and color output is investigated in detail. The important optical properties of these nano-hybrid materials provide a great opportunity in the fields of biological imaging, drug delivery and energy devices.