Interfacial Modulation of a Self-Sacrificial Synthesized SnO2@Sn Core-Shell Heterostructure Anode toward High-Capacity Reversible Li+ Storage

Sn-based anodes are promising high-capacity anode materials for low-cost lithium ion batteries. Unfortunately, their development is generally restricted by rapid capacity fading resulting from large volume expansion and the corresponding structural failure of the solid electrolyte interphase (SEI) during the lithiation/delithiation process. Herein, heterostructural core-shell SnO2-layer-wrapped Sn nanoparticles embedded in a porous conductive nitrogen-doped carbon (SOWSH@PCNC) are proposed. In this design, the self-sacrificial Zn template from the precursors is used as the pore former, and the LiF-Li3N-rich SEI modulation layer is motivated to average uniform Li+ flux against local excessive lithiation. Meanwhile, both the chemically active nitrogen sites and the heterojunction interfaces within SnO2@Sn are implanted as electronic/ionic promoters to facilitate fast reaction kinetics. Consequently, the as-converted SOWSH@PCNC electrodes demonstrate a significantly boosted Li+ capacity of 961 mA h g-1 at 200 mA g-1 and excellent cycling stability with a low capacity decaying rate of 0.071% after 400 cycles at 500 mA g-1, suggesting their great promise as an anode material in high-performance lithium ion batteries.

Synthesis of hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres as anode materials for lithium/sodium ion batteries

Tin-based anode materials have aroused interest due to their high capacities. Nevertheless, the volume expansion problem during lithium insertion/extraction processes has severely hindered their practical application. In particular, nano–micro hierarchical structure is attractive with the integrated advantages of nano-effect and high thermal stability of the microstructure. Herein, hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres were successfully synthesized by a facile glucose-assisted hydrothermal method, in which the glucose served as both morphology-control agent and carbon source. The hierarchical Sn/SnO nanosheets exhibit excellent electrochemical performances owing to the unique configuration and carbon coating. Specifically, a reversible high capacity of 2072.2 mA h g⁻¹ was observed at 100 mA g⁻¹. Further, 964.1 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹ and 820.4 mA h g⁻¹ at 1000 mA g⁻¹ after 300 cycles could be obtained. Encouragingly, the Sn/SnO also presents certain sodium ion storage properties. This facile synthetic strategy may provide new insight into fabricating high-performance Sn-based anode materials combining the advantages of both structure and carbon coating.

Hierarchical Sn/SnO nanosheets assembled by carbon-coated hollow nanospheres with promising lithium and sodium storage performances.

Heterostructured SnO2-SnS2@C Embedded in Nitrogen-Doped Graphene as a Robust Anode Material for Lithium-Ion Batteries

Tin-based anode materials with high capacity attract wide attention of researchers and become a strong competitor for the next generation of lithium-ion battery anode materials. However, the poor electrical conductivity and severe volume expansion retard the commercialization of tin-based anode materials. Here, SnO₂-SnS₂@C nanoparticles with heterostructure embedded in a carbon matrix of nitrogen-doped graphene (SnO₂-SnS₂@C/NG) is ingeniously designed in this work. The composite was synthesized by a two-step method. Firstly, the SnO₂@C/rGO with a nano-layer structure was synthesized by hydrothermal method as the precursor, and then the SnO₂-SnS₂@C/NG composite was obtained by further vulcanizing the above precursor. It should be noted that a carbon matrix with nitrogen-doped graphene can inhibit the volume expansion of SnO₂-SnS₂ nanoparticles and promote the transport of lithium ions during continuous cycling. Benefiting from the synergistic effect between nanoparticles and carbon matrix with nitrogen-doped graphene, the heterostructured SnO₂-SnS₂@C/NG further fundamentally confer improved structural stability and reaction kinetics for lithium storage. As expected, the SnO₂-SnS₂@C/NG composite exhibited high reversible capacity (1201.2 mA h g⁻¹ at the current rate of 0.1 A g⁻¹), superior rate capability and exceptional long-life stability (944.3 mAh g⁻¹ after 950 cycles at the current rate of 1.0 A g⁻¹). The results demonstrate that the SnO₂-SnS₂@C/NG composite is a highly competitive anode material for LIBs.

In situ growth of heterostructured Sn/SnO nanospheres embedded in crumpled graphene as an anode material for lithium ion batteries

Heterostructured Sn/SnO core–shell nanospheres embedded in graphene have been prepared by heating tin oleate coated on the surface of sodium carbonate crystals, and they exhibit excellent electrochemical performance for LIBs.

Metallic Sn-Based Anode Materials: Application in High-Performance Lithium-Ion and Sodium-Ion Batteries

With the fast-growing demand for green and safe energy sources, rechargeable ion batteries have gradually occupied the major current market of energy storage devices due to their advantages of high capacities, long cycling life, superior rate ability, and so on. Metallic Sn-based anodes are perceived as one of the most promising alternatives to the conventional graphite anode and have attracted great attention due to the high theoretical capacities of Sn in both lithium-ion batteries (LIBs) (994 mA h g-1) and sodium-ion batteries (847 mA h g-1). Though Sony has used Sn-Co-C nanocomposites as its commercial LIB anodes, to develop even better batteries using metallic Sn-based anodes there are still two main obstacles that must be overcome: poor cycling stability and low coulombic efficiency. In this review, the latest and most outstanding developments in metallic Sn-based anodes for LIBs and SIBs are summarized. And it covers the modification strategies including size control, alloying, and structure design to effectually improve the electrochemical properties. The superiorities and limitations are analyzed and discussed, aiming to provide an in-depth understanding of the theoretical works and practical developments of metallic Sn-based anode materials.

Green Fabrication of Silkworm Cocoon-like Silicon-Based Composite for High-Performance Li-Ion Batteries

Designing yolk-shell nanostructures is an effective way of addressing the huge volume expansion issue for large-capacity anode and cathode materials in Li-ion batteries (LIBs). Previous studies mainly focused on adopting a SiO₂ template through HF etching to create yolk-shell nanostructures. However, HF etching is highly corrosive and may result in a significant reduction of Si content in the composite. Herein, a silkworm cocoon-like silicon-based composite is prepared through a green approach in which Al₂O₃ was selected as a sacrificial template. The void space between the outer nitrogen-doped carbon (NC) shell formed by chemical vapor deposition using a pyridine precursor and the inside porous silicon nanorods (p-Si NRs) synthesized by magnesiothermic reduction of ordered mesoporous silica nanorods can be generated by etching Al₂O₃ with diluted HCl. The obtained p-Si NRs@void@NC composite is utilized as an anode material for LIBs, which exhibits a large initial discharge capacity of 3161 mAh g^-1 at 0.5 A g^-1, excellent cycling behavior up to 300 cycles, and super rate performance. Furthermore, a deep understanding of the mechanism for the yolk-shell nanostructure during the Li-alloying process is revealed by in situ transmission electron microscopy and finite element simulation.

Tin-based materials supported on nitrogen-doped reduced graphene oxide towards their application in lithium-ion batteries

Recently, nitrogen-doped graphene has attracted significant attention for application as an anode in lithium-ion batteries due to effective modulation of the electronic properties of graphene.

An enhanced oxygen electrode catalyst by incorporating CoO/SnO2 nanoparticles in crumpled nitrogen-doped graphene in alkaline media

An advanced and highly efficient oxygen electrode catalyst was fabricated by anchoring CoO/SnO₂ nanocrystals on nitrogen-doped graphene.

Controllable synthesis of rod-like SnO2 nanoparticles with tunable length anchored onto graphene nanosheets for improved lithium storage capability

Rod-like SnO₂ nanoparticles with tunable length have been anchored onto graphene nanosheets as high performance lithium-ion battery anodes.

Electrochemical properties of SnO2 nanoparticles immobilized within a metal–organic framework as an anode material for lithium-ion batteries

SnO₂ nanoparticles have been immobilized within MIL-101(Cr) crystals through a post-synthesis method for a lithium-ion battery anode.