A new mode to light up an adjacent DNA-scaffolded silver probe pair and its application for specific DNA detection

Recent Advances of Strategies and Applications in Aptamer-Combined Metal Nanocluster Biosensing Systems

Metal nanoclusters (NCs) are promising alternatives to organic dyes and quantum dots. These NCs exhibit unique physical and chemical properties, such as fluorescence, chirality, magnetism and catalysis, which contribute to significant advancements in biosensing, biomedical diagnostics and therapy. Through adjustments in composition, size, chemical environments and surface ligands, it is possible to create NCs with tunable optoelectronic and catalytic activity. This review focuses on the integration of aptamers with metal NCs, detailing molecular detection strategies that utilise the effect of aptamers on optical signal emission of metal NC-based biosensing systems. This review also highlights recent advancements in biosensing and biomedical applications, as well as illustrative case studies. To conclude, the strengths, limitations, current challenges and prospects for metal NC-based systems were examined.

A Fluorescence Enhancement Sensor Based on Silver Nanoclusters Protected by Rich-G-DNA for ATP Detection

In this study, a turn-on fluorescence sensor for the detection of adenosine 5'-triphosphate (ATP) was developed and tested using ATP-DNA2-Ag NCs. The results showed that the fluorescence of ATP-DNA2-Ag NCs was significantly enhanced with the addition of ATP. The fluorescence enhancement was a result of the specific binding activity of the ATP aptamer and ATP, which caused G-rich sequences to approach the dark DNA-Ag NCs, owing to the alteration in ATP aptamer conformation. The proposed sensor demonstrated a good linear range of 18-42 mM and a limit of detection (LOD) of 2.8 μM. The sensor's features include sensitivity, selectivity, and simple operation. In addition, the proposed sensor successfully measured ATP in 100-fold diluted fetal bovine serum.

Fluorescent DNA-Silver nanoclusters in food safety detection: From synthesis to application

In recent years, the conventional preparation of silver nanoclusters (AgNCs) has attracted much attention due to their ultra-small size, tunable fluorescence, easy-to-engineer, as well as biocompatible material. Moreover, its great affinity towards cytosine bases on single-stranded DNA has led to the construction of biosensors, especially aptamers, for a broad variety of applications in food safety and environmental protection. In past years, numerous researchers paid attention to the construction of AgNCs aptasensor. Therefore, this review will be an effort to summarize the synthetic strategy along with the influences of factors on synthesis, categorize the sensing mechanism of aptamer-functionalized AgNCs biosensors, as well as their specific applications in food safety detection including heavy metal, toxin, and foodborne pathogenic bacteria. Furthermore, a brief conclusion and outlook regarding the prospects and challenges of their applications in food safety were drawn in line with the developments in DNA-AgNCs.

Turn-on fluorescent nanoprobe for ATP detection based on DNA-templated silver nanoclusters

A turn-on fluorescence nanoprobe was constructed for the determination of adenosine 5'-triphosphate (ATP) based on DNA-templated silver nanoclusters (DNA-AgNCs). The significant enhancement fluorescence intensity of DNA-AgNCs in the presence of ATP is due to the high special binding affinity between ATP and the aptamer, resulting in the environment of DNA-AgNCs with darkish fluorescence lying at one terminus of DNA slightly altering owing to the change of ATP aptamer conformation. A good linear range runs from 9 to 24 mM with a satisfactory detection limit of 3 μM. Furthermore, the proposed nanoprobe exhibited good performance for ATP detection in diluted fetal bovine serum.

An amplified logic gate driven by in situ synthesis of silver nanoclusters for identification of biomarkers

An amplified DNA logic sensor was constructed for the identification of multiple biomarkers, in which the inputs of targets triggered the disassembly of a V-shaped probe (VSP) structure by a strand displacement reaction, leading to the synthesis of silver nanoclusters (AgNCs) for electrocatalytic reduction of H₂O₂. The sensing platform achieved sensitive detection of methylated DNA and microRNA 122 with detection limits down to 3.4 and 4.1 fM, respectively, and can be used for the assay of clinical serum samples from healthy volunteers and liver injury patients with satisfactory results. The DNA logic sensor exhibited the advantages of convenience, low cost, and versatility without the involvement of electroactive label modification, which is helpful for disease diagnosis as well as the fundamental investigation of interfacial electrochemistry and molecular biology.

Fluorescence Enhancement Method for Aptamer-Templated Silver Nanoclusters and Its Application in the Construction of a β-Amyloid Oligomer Sensor

DNA-templated silver nanoclusters (DNA-AgNCs) have attracted significant attention due to their unique fluorescence properties. However, so far, the relatively low quantum yields of the DNA-AgNCs and the complex design of DNA-AgNC-based sensors have limited their application in biosensing or bioimaging. Herein, we report a novel fluorescence enhancement method. The β-Amyloid Oligomer (AβO) aptamer (Apt_AβO) with A₁₀/T₁₀ at its 3' end can be directly used as the template to fabricate the AgNCs. When the AgNCs were hybridized with the complementary strand that has 12 bases suspended at its 3' terminal, being the same or complementary to the A/T at the 3' end of the Apt_AβO, and two-base mismatches in the complementary region of the aptamer excluded A₁₀/T₁₀, a dramatic fluorescence enhancement (maximum: ∼500-fold; maximum quantum yield: 31.5%) can be realized. The fluorescence enhancement should result from the aggregation-induced emission of the AgNCs, which can be attributed to forming the reticular structure of the hybridized product. To some extent, the method developed in this work is extendable. The fluorescence enhancement was also realized from the thrombin aptamer-templated AgNCs through designing the aptamer and the corresponding complementary strand according to the method. Based on the fluorescence enhancement of the Apt_AβO-templated AgNCs, an "on-off" fluorescence sensor was constructed for the sensitive and selective detection of AβO. This work provides a rational strategy to realize fluorescence enhancement for the aptamer-templated AgNCs and design an aptamer-based fluorescence sensor.

A label-free aptasensor for the detection of ATP based on turn-on fluorescence DNA-templated silver nanoclusters

A label-free aptasensor has been fabricated in order to detect adenosine triphosphate (ATP) using turn-on fluorescence DNA-Ag NCs. The fluorescence of the DNA-Ag NCs could increase remarkably with the addition of ATP mainly because ATP specifically interacts with its aptamer to change the microenvironment of the darkish DNA-Ag NCs located at one terminus or two termini due to the conformational alteration of the aptamer structure. The proposed sensor can detect ATP in a linear range of 6-27 mM with a good detection limit of 5.0 μM. Additionally, the proposed method succeeded in detecting ATP in fetal bovine serum.

Progress of metal nanoclusters in nucleic acid detection

The development and application of metal nanoclusters (MNCs) in nucleic acid testing in the past 10 years have been summarized. Fluorescence enhancement and red shift can occur when the G-rich sequence gets close to Ag NCs or the complementary DNA strand hybridizes with Ag NCs tail strand, which can be used to identify the nucleic acid. Ag NCs with the abasic site in DNA duplex can distinguish mutant genes such as cancer suppression gene p53. Ag NCs with auxiliary DNA can be used to detect miR-21, miR-16-5p, miR-19b-3p, and miR-141. Cu NCs/Cu NPs can recognize miRNA-155, miR-21, and miR-let-7d without auxiliary DNA. Au NCs can identify H1N1 gene fragments by fluorescence quenching caused by proximity to the G-rich sequence. Besides, Au NCs can recognize miRNA-21 and let-7a. SsDNA MNCs adsorbed on the surface of GO and CNPs oxide can be used to identify HBV and HIV gene fragments. The addition of enzymes or auxiliary amplification technologies is a popular way to improve probe sensitivity. Ag NCs combined with TAIEA has the best performance and can obtain LOD as low as aM for miRNA.

Recent Advances on Functional Nucleic-Acid Biosensors

In the past few decades, biosensors have been gradually developed for the rapid detection and monitoring of human diseases. Recently, functional nucleic-acid (FNA) biosensors have attracted the attention of scholars due to a series of advantages such as high stability and strong specificity, as well as the significant progress they have made in terms of biomedical applications. However, there are few reports that systematically and comprehensively summarize its working principles, classification and application. In this review, we primarily introduce functional modes of biosensors that combine functional nucleic acids with different signal output modes. In addition, the mechanisms of action of several media of the FNA biosensor are introduced. Finally, the practical application and existing problems of FNA sensors are discussed, and the future development directions and application prospects of functional nucleic acid sensors are prospected.

Recent advances in templated synthesis of metal nanoclusters and their applications in biosensing, bioimaging and theranostics

As a kind of promising nanomaterials, metal nanoclusters (MNCs) generally composed of several to hundreds of metal atoms have received increasing interest owing to their unique properties, such as ultrasmall size (<2 nm), fascinating physical and chemical properties, and so on. Recently, template-assisted synthesis of MNCs (e.g., Au, Ag, Cu, Pt and Cd) has attracted extensive attention in biological fields. Up to now, various templates (e.g., dendrimers, polymers, DNAs, proteins and peptides) with different configurations and spaces have been applied to prepare MNCs with the advantages of facile preparation, controllable size, good water-solubility and biocompatibility. Herein, we focus on the recent advances in the template-assisted synthesis of MNCs, including the templates used to synthesize MNCs, and their applications in biosensing, bioimaging, and disease theranostics. Finally, the challenges and future perspectives of template-assisted synthesized MNCs are highlighted. We believe that this review could not only arouse more interest in MNCs but also promote their further development and applications by presenting the recent advances in this area to researchers from various fields, such as chemistry, material science, physiology, biomedicine, and so on.

An enzyme-free probe based on G-triplex assisted by silver nanocluster pairs for sensitive detection of microRNA-21

A sensitive ratiometric fluorescence probe based on hybridization chain reaction (HCR) was constructed for sensitive detection of miRNA-21 by using G-triplex and silver nanocluster pairs (AgNC pairs) as an enzyme-free and label-free signal output group. miRNA-21 was used as the primer for the hybridization chain reaction of molecular beacon 1 (MB1) containing the locked G-triplex sequence and molecular beacon 2 (MB2) with intact AgNC pairs at the 5' and 3' end activation. The double-stranded product was obtained along with the opening of the G-triplex and the separation of the AgNC pairs. A detection limit of 67 pM and a linear detection range of 0.1-300 nM were obtained for miRNA-21 determination. The proposed strategy enabled the monitoring of miRNA-21 levels in at least three cell lines, indicating that it provided new ideas for detecting miRNA in real samples. MB1 and MB2 contained the locked G-triplex sequence and silver nanocluster pairs (AgNC pairs), respectively. In the presence of target, the hybridization chain reaction (HCR) between MB1 and MB2 was initiated. At the same time, the locked G-triplex was released and combined to the dye thioflavin T (THT) to increase fluorescence, while the separation of the AgNC pairs caused the fluorescence to decrease. The double-stranded (ds) DNA product was generated to form a ratiometric signal to be detected.

The spatial organization of trace silver atoms on a DNA template

DNA with programmable information can be used to encode the spatial organization of silver atoms. Based on the primary structures of a DNA template containing a controllable base arrangement and number, the surrounding environment and cluster together can induce the folding of the DNA template into an appropriate secondary structure for forming AgNCs with different fluorescence emissions, such as i-motif, G-quadruplex, dimeric template, triplex, monomeric or dimeric C-loop, emitter pair, and G-enhancer/template conjugate. Stimuli can induce the dynamic structural transformation of the DNA template with a recognition site for favourably or unfavourably forming AgNCs, along with varied fluorescence intensities and colours. The array of several or more of the same and different clusters can be performed on simple and complex nanostructures, while maintaining their original properties. By sorting out this review, we systematically conclude the link between the performance of AgNCs and the secondary structure of the DNA template, and summarize the precise arrangement of nanoclusters on DNA nanotechnology. This clear review on the origin and controllability of AgNCs based on the secondary structure of the DNA template is beneficial for exploring the new probe and optical devices.

The sensitive detection of ATP and ADA based on turn-on fluorescent copper/silver nanoclusters

A simple turn-on fluorescence strategy is proposed for the detection of ATP based on DNA-stabilized copper/silver nanoclusters (DNA-Cu/Ag NCs). The fluorescence intensity of DNA-Cu/Ag NCs increases significantly in the presence of ATP, because the specific interaction between ATP and its aptamer causes two darkish Cu/Ag NCs to be situated at the 5' and 3' termini close to each other. A limit of detection (LOD) of 7.0 μM is found, in a linear range of 2-18 mM, and the proposed sensor is simple, sensitive, and selective. Additionally, the DNA-Cu/Ag NCs/ATP system is further developed into a sensor for ADA detection and demonstrates a linear response to ADA from 5 to 50 U/L with a LOD of 5 U/L. The proposed method is also shown to be successful in detecting ATP and ADA in a solution of fetal bovine serum.

An aptasensor for the label-free detection of thrombin based on turn-on fluorescent DNA-templated Cu/Ag nanoclusters

A highly sensitive thrombin aptasensor was constructed based on the alteration of the aptamer conformation induced by the target recognition and the turn-on fluorescence due to the proximity of two darkish DNA-templated copper/silver nanoclusters (DNA-Cu/Ag NCs). Two DNA templates were designed as the functional structures consisting of the Cu/Ag NC-nucleation segment located at two termini or one terminus and the aptamer segment in the middle of a DNA template. Two darkish DNA-Cu/Ag NCs came close to each other when the aptamer combined with the target due to the conformational alteration of the aptamer structure, resulting in an increased fluorescence signal readout. Thrombin was sensitively determined as low as 1.6 nM in the range of 1.6–8.0 nM with a high selectivity. Finally, this sensor succeeded in detecting thrombin in a real fetal bovine serum.

A highly sensitive thrombin aptasensor was constructed based on the alteration of the aptamer conformation induced by the target recognition and the turn-on fluorescence due to the proximity of two darkish DNA-templated copper/silver nanoclusters (DNA-Cu/Ag NCs).

Fluorometric determination of ssDNA based on functionalized magnetic microparticles and DNA supersandwich self-assemblies

A method is described for the determination of DNA via nucleic acid amplification by using nucleic acid concatemers that result from DNA supersandwich self-assemblies (SSAs). The method employs two auxiliary probes to form self-assembled biotin SSAs. These exhibit strong fluorescence if labeled with intercalator SYBR Green I. In the presence of the target (as exemplified for a 30-mer), streptavidin is released from the surface of the functionalized magnetic microparticles (FMMPs) by competitive hybridization on the surface. However, the SSA products do not conjugate to the FMMPs. This leads to a large amount of SYBR Green I intercalated into the concatemers and eventually results in amplified fluorescence in the supernate. The SSA products can be prepared beforehand, and amplification therefore can be completed within 50 min. The method is more efficient than any other conventional amplification. The detection limit for the 30-mer is 26.4 fM which is better by a factor of 10 compared to other amplification methods. Conceivably, the method can be further extended to the determination of a wide variety of targets simply by replacing the sequences of the probes. Finally, this rapid and highly sensitive method was employed for detection of Ebola virus gene (≈30-mer) and ATP in spiked serum with satisfactory results. Graphical abstract A high sensitivity and efficiency bioassay is described based on functionalized magnetic microparticles and DNA supersandwich self-assemblies.

Bio-Recognition in Spectroscopy-Based Biosensors for *Heavy Metals-Water and Waterborne Contamination Analysis

: Microsystems and biomolecules integration as well multiplexing determinations are key aspects of sensing devices in the field of heavy metal contamination monitoring. The present review collects the most relevant information about optical biosensors development in the last decade. Focus is put on analytical characteristics and applications that are dependent on: (i) Signal transduction method (luminescence, colorimetry, evanescent wave (EW), surface-enhanced Raman spectroscopy (SERS), Förster resonance energy transfer (FRET), surface plasmon resonance (SPR)); (ii) biorecognition molecules employed (proteins, nucleic acids, aptamers, and enzymes). The biosensing systems applied (or applicable) to water and milk samples will be considered for a comparative analysis, with an emphasis on water as the primary source of possible contamination along the food chain.

A "turn-on" fluorometric assay for kanamycin detection by using silver nanoclusters and surface plasmon enhanced energy transfer

A rapid method is described for the determination of the antibiotic kanamycin. It integrates a kanamycin-binding aptamer and surface plasmon enhanced energy transfer (SPEET) between DNA-templated silver nanoclusters (AgNCs) and gold nanoparticles (AuNPs). The AgNCs and AuNPs were selected as energy donor and energy acceptor, respectively. The aptamer was designed to regulate the energy transfer between AgNCs and AuNPs. The aptamer was adsorbed on the AuNPs. Upon addition of kanamycin, the aptamer-kanamycin complex is formed, and this results in the aggregation of the AuNPs in high salt concentration, the formation of a blue coloration, and in the suppression of the SPEET process. The fluorescence of the AgNCs (with excitation/emission peaks at 560/600 nm) is quenched by the aptamer protected AuNPs in absence of kanamycin. The fluorescence on addition of kanamycin increases linearly in the 5 to 50 nM concentration range, with a lower detection limit of 1.0 nM (at S/N = 3). The assay can be performed within 30 min. It was successfully applied to the determination of kanamycin in spiked milk samples, and recoveries ranged between 90.2 and 95.4%. Conceivably, the strategy has a wide potential for screening by simply changing the aptamer. Graphical abstract Schematic presentation of the aptamer regulated surface plasmon enhance energy transfer (SPEET) between silver nanoclusters (Ag NCs) and gold nanoparticles (Au NCs) in high salt concentration buffer, and of the procedure for the detection of kanamycin.

A new label-free fluorescent sensor for human immunodeficiency virus detection based on exonuclease III-assisted quadratic recycling amplification and DNA-scaffolded silver nanoclusters

A label-free and sensitive fluorescence biosensing platform for human immunodeficiency virus gene (HIV-DNA) detection has been fabricated based on luminescent DNA-scaffolded silver nanoclusters (DNA/AgNCs) and autonomous exonuclease III (Exo III)-assisted recycling signal amplification. One long-chain DNA (X-DNA) molecule can hybridize with two assistant DNA (F-DNA) molecules and one HIV-DNA molecule; after Exo III digests X-DNA to liberate F-DNA and HIV-DNA. F-DNA combines with P-DNA (template of DNA/AgNCs), accordingly, P-DNA is cut and the fluorescence of the system is quenched. This assay can finish in one-step without any labelling of the DNA chain or complex construction, and the strategy is sensitive with the detection limit as low as 35 pM. At the same time, the approach exhibits good selectivity even against a single base mismatch. What's more, the method is able to monitor HIV-DNA in real human serum samples; it holds great potential for early diagnosis in gene-related diseases.

Highly sensitive and selective detection of Pb2+ using a turn-on fluorescent aptamer DNA silver nanoclusters sensor

A novel turn-on fluorescent biosensor has been constructed using C-PS2.M-DNA-templated silver nanoclusters (Ag NCs) with an average diameter of about 1 nm. The proposed approach presents a low-toxic, simple, sensitive, and selective detection for Pb²⁺. The fluorescence intensity of C-PS2.M-DNA-Ag NCs enhances significantly in the presence of Pb²⁺, which is attributed to the special interaction between Pb²⁺ and its aptamer DNA PS2.M. Pb²⁺ induces the aptamer to form G-quadruplex and makes two darkish DNA/Ag NCs located at the 3' and 5' terminus close, resulting in the fluorescence light-up. Moreover, Pb²⁺ can be detected as low as 3.0 nM within a good linear range from 5 to 50 nM (R = 0.9862). Furthermore, the application for detection of Pb²⁺ in real water samples further demonstrates the reliability of the sensor. Thus, this sensor system shows a potential application for monitoring Pb²⁺ in environmental samples.

DNA metallization: principles, methods, structures, and applications

This review summarizes the research activities on DNA metallization since the concept was first proposed in 1998, covering the principles, methods, structures, and applications.

Constructing a Robust Fluorescent DNA-Stabilized Silver Nanocluster Probe Module by Attaching a Duplex Moiety

Fluorescent DNA-templated silver nanoclusters (DNA-Ag NCs) have served as excellent luminescent probes and operation units in various applications. However, the fluorescence property of DNA-Ag NCs is very sensitive to elongation or modification of the DNA template, limiting the breadth of applications. In this work, we propose a strategy for constructing a robust fluorescent DNA-Ag NCs probe module by attaching a duplex moiety to the nanocluster-bearing sequence. The fluorescence intensity of the DNA-Ag NCs can be enhanced 90-fold upon hybridization of the elongated moiety. Adenine in the linker sequence has a further enhancing effect on the fluorescence intensity, whereas thymine has a quenching effect. The transformation from a non-fluorescent species to fluorescent nanoclusters is responsible for the fluorescence enhancement with duplex formation of the elongated moiety. We hope that this design will aid future diversification of experimental designs to facilitate more applications that are currently limited by the aforementioned problems.

Integration of G-quadruplex and DNA-templated Ag NCs for nonarithmetic information processing

To create sophisticated molecular logic circuits from scratch, you may not believe how common the building blocks can be and how diverse and powerful such circuits can be when scaled up. Using the two simple building blocks of G-quadruplex and silver nanoclusters (Ag NCs), we experimentally construct a series of multifunctional, label-free, and multi-output logic circuits to perform nonarithmetic functions: a 1-to-2 decoder, a 4-to-2 encoder, an 8-to-3 encoder, dual transfer gates, a 2 : 1 multiplexer, and a 1 : 2 demultiplexer. Moreover, a parity checker which is capable of identifying odd and even numbers from natural numbers is constructed conceptually. Finally, a multi-valued logic gate (ternary inhibit gate) is readily achieved by taking this DNA/Ag NC system as a universal platform. All of the above logic circuits share the same building blocks, indicating the great prospects of the assembly of nanomaterials and DNA for biochemical logic devices. Considering its biocompatibility, the novel prototypes developed here may have potential applications in the fields of biological computers and medical diagnosis and serve as a promising proof of principle in the not-too-distant future.

A versatile proximity-dependent probe based on light-up DNA-scaffolded silver nanoclusters

It is well-known that proximity-dependent probes containing an analyte recognization site and a signal formation domain could be assembled specifically into a sandwich-like structure (probe-analyte-probe) via introducing an analyte. In this work, using the design for zirconium ion (Zr(4+)) detection as the model, we develop a novel and reliable proximity-dependent DNA-scaffolded silver nanocluster (DNA/AgNC) probe for Zr(4+) detection via target-induced emitter proximity. The proposed strategy undergoes the two following processes: target-mediated emitter pair proximity as target recognition implement and the synthesis of DNA/AgNCs with fluorescence as a signal reporter. Upon combination of the rationally designed probe with Zr(4+), the intact templates were obtained according to the -PO3(2-)-Zr(4+)-PO3(2-)- pattern. The resultant structure with an emitter pair serves as a potent template to achieve highly fluorescent DNA/AgNCs. To verify the universality of the proposed proximity-dependent DNA/AgNC probe, we extend the application of the proximity-dependent probe to DNA and adenosine triphosphate (ATP) detection by virtue of a specific DNA complementary sequence and ATP aptamer as a recognition unit, respectively. The produced fluorescence enhancement of the DNA/AgNCs in response to the analyte concentration allows a quantitative evaluation of the target, including Zr(4+), DNA, and ATP with detection limits of ∼3.00 μM, ∼9.83 nM, and ∼0.81 mM, respectively. The proposed probe possesses good performance with simple operation, cost-effectiveness, good selectivity, and without separation procedures.

A new AgNC fluorescence regulation mechanism caused by coiled DNA and its applications in constructing molecular beacons with low background and large signal enhancement

A AgNC fluorescence interference strategy caused by a coiled DNA sequence (A) and its applications in target DNA detection (B).

Highly sensitive and selective fluorescence detection of Hg2+ based on turn-on aptamer DNA silver nanoclusters

A novel turn-on fluorescent biosensor based on C–Hg²⁺-aptamer-1-DNA-templated silver nanoclusters (Ag NCs) was developed for the quantitative analysis of Hg²⁺.

A novel, label-free fluorescence detection method for the formation of G-quadruplex DNA based on DNA-templated silver nanoclusters

A novel, label-free fluorescence detection method was proposed for the formation of the G-quadruplex DNAs based on placing two DNA-Ag NCs together to light-up fluorescence.

DNA-templated silver nanoclusters: structural correlation and fluorescence modulation

12 years after the introduction of DNA-templated silver nanoclusters (DNA-AgNCs), exciting progress has been made and yet we are still in the midst of trying to fully understand this nanomaterial. The prominent excellence of DNA-AgNCs is undoubtedly its modulatable emission property, of which how variation in DNA templates causes emission tuning remains elusive. Based on the up-to-date DNA-AgNCs, we aim to establish the correlation between the structure/sequence of DNA templates and emission behaviour of AgNCs. Herein, we systematically present a wide-range of DNA-AgNCs based on the structural complexity of the DNA templates, including single-stranded DNA (ssDNA), double-stranded DNA (dsDNA), triple-stranded DNA (tsDNA) and DNA nanostructures. For each DNA category, we discuss the emission property, quantum yield and synthesis condition of the respective AgNCs, before cross-comparing the impact of different DNA scaffolds on the properties of AgNCs. A future outlook for this area is given as a conclusion. By putting the information together, this review may shed new light on understanding DNA-AgNCs while we are expecting continuous breakthroughs in this field.

The aptamer DNA-templated fluorescence silver nanoclusters: ATP detection and preliminary mechanism investigation

Two general and reliable fluorescence sensors were proposed in this work utilizing aptamer DNA-templated silver nanoclusters (Ag NCs). Both DNA-AgNCs could be used for label-free detecting of ATP with the limits of detection of 0.44 and 0.65mM. One of them was further applied to monitor the activity of adenosine deaminase (ADA). In our effort to elucidate the light-up mechanism, we studied a total of six Ag NCs prepared by different DNA sequences, and found that they showed different sensitivity to ATP. Both BT3T3- and BT3T3(R)-templated Ag NCs were chose to make particular studies by UV-vis, TEM, fluorescence, and TCSPC methods. The results showed that when DNA-Ag NCs was kept for 1.5h and presented a strong fluorescence, the addition of ATP failed to cause a large change of fluorescence intensity; on the contrary, after Ag NCs was kept for 24h and emitted a weak fluorescence, adding ATP was able to result in the large fluorescence enhanced of 43 and 33 times for BT3T3- and BT3T3(R)-templated Ag NCs, respectively. The possible mechanism was also suggested that ATP binding to aptamer segment of template induced the change of the DNA secondary structure, which made the aggregated Ag nanoparticles disperse into Ag NCs with an average diameter of about 2nm that were responsible for the large fluorescence increase. Moreover, ATP could protect the fluorescence intensity of BT3T3(R)-templated Ag NCs from quenching for at least 9h.

Label-Free Detection of Sequence-Specific DNA Based on Fluorescent Silver Nanoclusters-Assisted Surface Plasmon-Enhanced Energy Transfer

We have developed a label-free method for sequence-specific DNA detection based on surface plasmon enhanced energy transfer (SPEET) process between fluorescent DNA/AgNC string and gold nanoparticles (AuNPs). DNA/AgNC string, prepared by a single-stranded DNA template encoded two emitter-nucleation sequences at its termini and an oligo spacer in the middle, was rationally designed to produce bright fluorescence emission. The proposed method takes advantage of two strategies. The first one is the difference in binding properties of single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) toward AuNPs. The second one is SPEET process between fluorescent DNA/AgNC string and AuNPs, in which fluorescent DNA/AgNC string can be spontaneously adsorbed onto the surface of AuNPs and correspondingly AuNPs serve as "nanoquencher" to quench the fluorescence of DNA/AgNC string. In the presence of target DNA, the sensing probe hybridized with target DNA to form duplex DNA, leading to a salt-induced AuNP aggregation and subsequently weakened SPEET process between fluorescent DNA/AgNC string and AuNPs. A red-to-blue color change of AuNPs and a concomitant fluorescence increase were clearly observed in the sensing system, which had a concentration dependent manner with specific DNA. The proposed method achieved a detection limit of ∼2.5 nM, offering the following merits of simple design, convenient operation, and low experimental cost because of no chemical modification, organic dye, enzymatic reaction, or separation procedure involved.

A novel linear molecular beacon based on DNA-scaffolded silver nanocluster for DNA detection via exonuclease III-assisted cyclic amplification

Developing label-free molecular beacon (MB)-based methods for DNA detection has been of great significance in bioanalysis because of their simplicity, low cost, and specificity.

DNA template-regulated intergrowth of a fluorescent silver nanocluster emitter pair

We have developed a novel type of intensely fluorescent DNA-templated silver nanoclusters (DNA/AgNCs), which is in the form of the intergrowth of a Ag emitter pair.