Aptamer-mediated 'turn-off/turn-on' nanozyme activity of gold nanoparticles for kanamycin detection

Prospects for the use of nanozyme-based electrochemical and colorimetric sensors for antibiotic detection

Rapid and accurate monitoring of residual antibiotic concentrations is of great importance in environmental monitoring. Therefore, research is active to develop new methods for analyzing antibiotics. Biosensors, including those based on nanozymes, are very successful for antibiotic analysis. Nanozymes (nanomaterials with enzymelike activity) have emerged as a promising solution offering improved stability, cost-effectiveness, and versatility, as compared with natural enzymes. The use of nanozyme-based electrochemical and colorimetric sensors for detecting antibiotics remains underexplored. This review presents the main prospects for the use of electrochemical and colorimetric nanozyme sensor systems to detect antibiotics. It identifies major shortcomings of these platforms and ways to deal with them. Finally, it highlights the advantages of these sensors over other systems and explains the main mechanisms of signal generation for antibiotic detection.

Dual-Nanozyme Cascade for System-Wide Specific Colorimetric Detection of Aminoglycoside Antibiotics

Antibiotic contamination has been a significant concern in environmental monitoring. Nanozyme-based colorimetric sensors can provide valuable support for in-field detection. However, the development of sensing elements capable of identifying an entire class of specific antibiotics using a single material poses a considerable challenge. In this work, we present a compartmentalized dual-nanozyme cascade composite (Au@mPDA/PAA-Cu2MI, AmPC) designed for the colorimetric detection of aminoglycoside antibiotics (AGs), and we analyze the catalytic mechanisms of the dual-enzyme system in detail. The AmPC composite possesses both analogue glucose oxidase-like (aGOx-like) and peroxidase-like (POD-like) activities. In this process, AGs with a sugar structure can serve as the initial substrate of the reaction, while the resulting H2O2 acts as the second substrate for colorimetric detection. Using gentamicin (GMC) as a proof of concept, we established a detection range of 0.1-10 μg/mL, with a detection limit (LOD) of 91 ng/mL. In addition, we validated the colorimetric response for other AGs and employed principal component analysis (PCA) for differentiating among various AGs. This approach enables nanozymes to selectively recognize their targets through a cascade mechanism. Furthermore, it facilitates the simultaneous detection and identification of antibiotics, highlighting its potential for in-field applications.

Amino acid modified copper-based metal organic polyhedral with higher peroxidase activity for potassium guaiacol sulfonate detection

It has been reported some nanozymes could be used as a substitute for natural enzyme to detect H2O2 to some extent. However, the low catalytic effect of these materials limited their further application fields. Hence, to increase the catalytic activity of nanozymes was a hot research topic and many methods have been reported. Among them, surface modification was an important and efficient approach due to the surface of nanomaterials could affect their properties. In this article, three amino acid modified Cu-MOPs: H-Cu-MOP-Glutamine, H-Cu-MOP-Leucine and H-Cu-MOP-Isoleucine were obtained by further coordination interactions of carboxyl group with copper ions. Compared with H-Cu-MOP, the modified Cu-MOP exhibited a higher catalytic activity and a more stable color change, which could broaden its potential application field. Due to its excellent peroxidase activity, H-Cu-MOP-Leucine can be used to detect potassium guaiacol sulfonate with good anti-interference properties. It exhibits a favorable linear range of 5.0 × 10- 5-1.0 × 10- 3 M, and the limit of detection is 1.28 × 10- 5 M, making it suitable for practical applications. The above results indicate that post-modification of MOP can effectively improve its performance, providing a viable strategy for broadening the practical application of MOP in the detection field.

Chemiluminescence detection of kanamycin by DNA aptamer regulating peroxidase-like activity of Co3O4 nanoparticles

Kanamycin (KAN) is widely used as a growth hormone analog and an antibacterial agent. However, abuse of this substance has resulted in the accumulation of excessive residue levels in foods of animal origin, which presents a significant risk to human health. A chemiluminescent aptasensor was constructed for the rapid quantitative detection of KAN by combining the properties of Co3O4 nanoparticles (Co3O4 NPs) nanozyme activity and DNA aptamer with high specificity. The DNA aptamer/Co3O4 NPs nanozyme regulated the chemiluminescence signal by exploiting the chemiluminescent properties of luminol oxidation by H2O2. Specific binding of KAN to the aptamer led to the formation of a steric hindrance block in the solution, which inhibited the activity of nanozyme and reduced signal intensity. The degree of signal reduction is related to the concentration of KAN. Under optimal conditions, there was good linearity between KAN concentration and chemiluminescence signal intensity in the range of 0.5-8.0 μΜ, with a detection limit of 0.26 μΜ. The detection system performed well in the presence of competing antibiotics and was virtually unaffected. The method was also suitable for the detection of KAN in milk samples with sample recoveries of 97.8%-99.1%. The chemiluminescence sensor has the advantages of low cost, specificity, and sensitivity, and does not require an external light source or modification of the nucleic acid aptamer which makes it a promising candidate for applications in the field of food detection.

Silver-based bimetallic nanozyme fabrics with peroxidase-mimic activity for urinary glucose detection

The enhanced catalytic properties of bimetallic nanoparticles have been extensively investigated. In this study, bimetallic Ag-M (M = Au, Pt, or Pd) cotton fabrics were fabricated using a combination of electroless deposition and galvanic replacement reactions, and improvement in their peroxidase-mimicking catalytic activity compared to that of the parent Ag fabric was studied. The Ag-Pt bimetallic nanozyme fabric, which showed the highest catalytic activity and ability to simultaneously generate hydroxyl (•OH) and superoxide (O2•-) radicals, was assessed as a urine glucose sensor. This nanozyme fabric sensor could directly detect urinary glucose in the pathophysiologically relevant high millimolar range without requiring sample predilution. The sensor could achieve performance on par with that of the current clinical gold standard assay. These features of the Ag-Pt nanozyme sensor, particularly its ability to avoid interference effects from complex urinary matrices, position it as a viable candidate for point-of-care urinary glucose monitoring.

Gold/DNA-Cu2+ Complex Nanozyme-Based Aptamer Lateral Flow Assay for Highly Sensitive Detection of Kanamycin

Aptamer-based lateral flow analysis (Apt-LFAs) has promising applications in many fields. Nanozymes have demonstrated high potential in improving the performance of Apt-LFAs and have been increasingly utilized in recent studies. In this study, we developed a nanozyme-based Apt-LFA for the rapid and sensitive detection of kanamycin by using a novel dual-functionalized AuNPs@polyA-DNA/GpG-Cu2+ nanozyme as a nanoprobe. In the nanoprobe design, the polyA-cDNA strand can discriminate a kanamycin aptamer from the kanamycin/aptamer complex, and the GpG-Cu2+ complex can amplify the detection signal by catalyzing the chromogenic reaction. The nanozyme Apt-LFA can quantify kanamycin in the range of 1-250 ng/mL with an LOD of 0.08 ng/mL, which demonstrated a 4-fold sensitivity improvement and had a wider linear range than the conventional AuNP-based LFA. The Apt-LFA was successfully applied to the detection of kanamycin in honey with good recoveries. Our dual-functionalized AuNP nanoprobe is easily prepared and can be highly compatible with the conventional AuNP-DNA-based LFA platform; thus, it can be extended to the application of Apt-LFAs for other small molecules.

A enzyme-free fluorescence quenching sensor for amplified detection of kanamycin in milk based on competitive triggering strategies

In this work, we constructed a FAM fluorescence quenching biosensor based on an aptamer competition recognition and enzyme-free amplification strategy. We design a competing unit consisting of an aptamer chain and a complementary chain, and a catalytic hairpin self-assembly (CHA) unit consisting of two hairpins in which the complementary chain can trigger the catalytic hairpin self-assembly. In the initial state, the aptamer chain is combined with the complementary chain, the catalytic hairpin self-assembly unit is inhibited, the FAM fluorescence group was far away from the BHQ1 quenching group, and the fluorescence is turn-on. In the presence of kanamycin, the aptamer chain recognizes kanamycin and doesn't form double chains, resulting in the free complementary chain triggering hairpin 1 (H1), and then H1 triggering hairpin 2 (H2), FAM fluorophore is close to the BHQ1 quenching group, and the fluorescence is off-on. When H1 and H2 form a cyclic reaction, enzyme-free amplification is achieved and there is significant output of the fluorescence signal. Therefore, the biosensor has good performance in detecting kanamycin, the detection line is 54 nM, the linear range is 54 nM-0.9 μM, and it can achieve highly selective detection of kanamycin. Kanamycin residue may cause serious harm to human health. The high sensitivity detection of kanamycin is urgent, so this project has a great application potential for food detection.

Amplified Assembly of G-Quadruplex-Decorated DNA Network Nanostructure toward AIE Signaling-Based Sensitive Biosensing

Aggregation-induced emission (AIE) has offered a promising approach for developing low-background fluorescent methods; however, its applications often suffer from complex probe synthesis and poor biocompatibility. Herein, a novel AIE biosensing method for kanamycin antibiotic assays was developed by utilizing a DNA network nanostructure assembled from an aptamer recognition reaction to capture a large number of tetraphenylethylene fluorogen-labeled signal DNA (DTPE) probes. Due to the excellent hydrophilicity of the oligonucleotides, DTPE exhibited excellent water solubility without obvious background signal emission. Based on an ingenious nucleotide design, an abundance of G-quadruplex blocks neighboring the captured DTPE were formed on the DNA nanostructure. Because of the greatly restricted free motion of DTPE by this unique nanostructure, a strong AIE fluorescence signal response was produced to construct the signal transduction strategy. Together with target recycling and rolling circle amplification-based cascade nucleic acid amplification, this method exhibited a wide linear range from 75 fg mL-1 to 1 ng mL-1 and a detection limit down to 24 fg mL-1. The excellent analytical performance and effective manipulation improvement of the method over previous approaches determine its promising potential for various applications.

Exonuclease-catalyzed recycling and annular four-footed DNA walking amplification-assisted "on-off-super on" signal transitions for photoelectrochemical biosensing of kanamycin

Photoelectrochemical (PEC) biosensors have exhibited a promising potential for assays of a large variety of analytes; however, how to realize their low background-based "super on" signal output is still a great challenge. Herein, we report a novel multiple nucleic acid amplification-assisted "on-off-super on" signal transition mechanism for the PEC biosensing of kanamycin antibiotics. The biosensing platform was constructed on a perylene-3,4,9,10-tetracarboxylic dianhydride-based photoelectrode, and its strong photocurrent could be well inhibited by an anchored ferrocene (Fc)-labeled hairpin DNA to produce a low background signal. Two target biorecognition-triggered exonuclease III-catalytic reactions were adopted to produce an annular four-footed DNA walker (AFW) and a methylene blue (MB)-labeled DNA strand. By using their synergistic effect to release Fc quenchers and simultaneously capture MB sensitizers, a "super on" signal output was realized. As a result, a very wide linear range from 10 fg mL-1 to 10 ng mL-1 and an ultra-low detection limit of 7.8 fg mL-1 were obtained. Meanwhile, the aptamer recognition-based homogeneous reaction and AFW-based multiple nucleic acid amplification effectively simplified the assay manipulation and well ensured the repeatability of the method. The satisfactory sample experiment results indicated its good reliability and accuracy for the antibiotic residue analysis application.

Enhancement of telomerase extension via quadruple nucleic acid recycling to develop a novel colorimetric biosensing method for kanamycin assay

BACKGROUND

Colorimetric biosensors have important value for antibiotic residue testing. However, many previous methods were constructed based on the optical density change of certain unstable single-colored products with poor discrimination for visual measurements. Moreover, their low extinction coefficients usually result in low sensitivity of biosensors. In addition, many conventional signal amplification strategies often involve sophisticated nanomaterial preparation, inconvenient multi-step assay manipulation and limited signal amplification ability. Therefore, the development of new colorimetric biosensing strategies with excellent visual discrimination, high sensitivity and convenient manipulation is highly desirable.

RESULTS

We designed a target recycling accelerated cascade DNA walking amplification mechanism to trigger a telomerase extension-related enzymatic reaction, and developed a novel colorimetric biosensing strategy for kanamycin (Kana) assay. The target recycling was induced by an exonuclease III-assisted aptamer recognition reaction, which could also trigger the successive DNA walking at the streptavidin (SA)- and magnetic bead (MB)-based tracks. This not only caused the quantitative exposure of the telomeric substrate primers on MB surfaces but also released another strand to accelerate the SA-based DNA walking. By using the telomerase extension product to link numerous alkaline phosphatases and induce the plasmonic property change of gold nanobipyramids (Au NBPs), a colorimetric signal output strategy was constructed. This method could be applied for the high-resolution visual screening of Kana, and it also showed a very low detection limit of 17.6 fg mL-1 for assaying Kana over a wide, five-order-magnitude linear range.

SIGNIFICANCE

The quadruple nucleic acid recycling-enhanced telomerase extension resulted in the ultrahigh sensitivity of the method and also excluded the sophisticated manipulations involved in conventional biosensing strategies. The multiple enzyme catalysis-induced plasmonic property change of Au NBPs realized the stable and multicolor visual signal transduction. Together with its low cost, simple operation, high selectivity, excellent repeatability, and reliable performances, this method exhibits great potential for use in practical applications.

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

Aptasensors Based on Non-Enzymatic Peroxidase Mimics: Current Progress and Challenges

Immunoassays based on antibodies as recognizing elements and enzymes as signal-generating modules are extensively used now in clinical lab diagnostics, food, and environmental analyses. However, the application of natural enzymes and antibodies has some drawbacks, such as relatively high manufacturing costs, thermal instability, and lot-to-lot variations that lower the reproducibility of results. Oligonucleotide aptamers are able to specifically bind their targets with high affinity and selectivity, so they represent a prospective alternative to protein antibodies for analyte recognition. Their main advantages include thermal stability and long shelf life, cost-efficient chemical synthesis, and negligible batch-to-batch variations. At the same time, a wide variety of non-protein peroxidase mimics are now available that show strong potential to replace protein enzymes. Here, we review and analyze non-protein biosensors that represent a nexus of these two concepts: aptamer-based sensors (aptasensors) with optical detection (colorimetric, luminescent, or fluorescent) based on different peroxidase mimics, such as DNAzymes, nanoparticles, or metal-organic frameworks.

A robust and facile label-free method for highly sensitive colorimetric detection of ascorbic acid in fresh fruits based on peroxidase-like activity of modified FeCo-LDH@WO3 nanocomposite

Many compounds such as amino acids and oligonucleotides have been shown to effectively change peroxidase-like activity of nanoparticles. While a few studies have focused on mimicking the active site of natural enzymes on nanozymes and thus increasing their substrate affinity. Therefore, in this work, the surface of FeCo@WO3 nanocomposite was modified using guanosine triphosphate (GTP) to mimic the histidine of peroxidase enzyme's active site and its modification was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FT-IR). Then, the peroxidase-mimicking activity of the modified nanocomposite was tested using a colorimetric method, based on the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). It was found that GTP improves the activity of FeCo@WO3 as a natural peroxidase active site's distal histidine residue. Ascorbic acid (AA) is a powerful antioxidant that induces the reduction of blue color (oxidized TMB) ox-TMB to colorless TMB. The colorimetric method was applied for the sensitive detection of AA in common fruits. The linear range of AA was 10-100 μM with a limit of detection (LOD) of 0.27 μM, which provides a rapid and sensitive method for testing AA in the field of food analysis.

Biosensors for waterborne virus detection: Challenges and strategies

Waterborne viruses that can be harmful to human health pose significant challenges globally, affecting health care systems and the economy. Identifying these waterborne pathogens is essential for preventing diseases and protecting public health. However, handling complex samples such as human and wastewater can be challenging due to their dynamic and complex composition and the ultralow concentration of target analytes. This review presents a comprehensive overview of the latest breakthroughs in waterborne virus biosensors. It begins by highlighting several promising strategies that enhance the sensing performance of optical and electrochemical biosensors in human samples. These strategies include optimizing bioreceptor selection, transduction elements, signal amplification, and integrated sensing systems. Furthermore, the insights gained from biosensing waterborne viruses in human samples are applied to improve biosensing in wastewater, with a particular focus on sampling and sample pretreatment due to the dispersion characteristics of waterborne viruses in wastewater. This review suggests that implementing a comprehensive system that integrates the entire waterborne virus detection process with high-accuracy analysis could enhance virus monitoring. These findings provide valuable insights for improving the effectiveness of waterborne virus detection, which could have significant implications for public health and environmental management.

A colorimetric aptasensor for detecting ochratoxin A based on label-free aptamer and gold nanozyme

In this study, the aptamer of ochratoxin A (OTA) increased the negative charge density on the surface of gold nanoparticles (AuNPs) and promoted the release of hydroxyl radicals and Au3+ to enhance the peroxidase-like activity of the AuNPs. The OTA bound only to the aptamer and did not adsorb non-specifically to the AuNPs. Based on these two conclusions, a label-free colorimetric aptasensor was successfully developed, enabling the precise detection of OTA within the concentration range of 10-600 nM, with a remarkably low detection limit of 6.20 nM. The colorimetric aptasensor was applied to detect OTA in oats, corn, soybeans, rice, and glutinous rice.

Dual cascade DNA walking-induced "super on" photocurrent response for constructing a novel antibiotic biosensing method

The construction of effective methods for the convenient testing of antibiotic residues in real samples has attracted considerable interest. Herein, we designed a dual cascade DNA walking amplification strategy and combined it with the controllable photocurrent regulation of a photoelectrode to develop a novel photoelectrochemical (PEC) biosensing method for antibiotic detection. The photoelectrode was prepared through the surface modification of a glassy carbon electrode with the TiO₂/CdS QDs nanocomposite synthesized by an in situ hydrothermal deposition method. The strong anodic PEC response of the nanocomposite could be well inhibited by the introduction of a silver nanoclusters (Ag NCs)-labeled DNA hairpin onto its surface. Upon the target biorecognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme)-driven DNA walking was triggered to release another MNAzyme strand-linked streptavidin (SA) complex. As this SA complex could serve as a four-legged DNA walker, its cascade walking on the electrode surface not only released Ag NCs but also caused the linking of Rhodamine 123 with the electrode to realize the "super on" photocurrent output. By using kanamycin as the model analyte, this method showed a very wide linear range from 10 fg mL^-1 to 1 ng mL^-1 and a very low detection limit of 0.53 fg mL^-1. Meanwhile, the simple photoelectrode preparation and the aptamer recognition-based autonomous DNA walking resulted in the convenient manipulation and excellent repeatability. These unique performances determine the great potential of the proposed method for practical applications.

A CRISPR/Cas12a-based fluorescence aptasensor for the rapid and sensitive detection of ampicillin

This study introduces CRISPR/Cas-based aptasensor for the highly sensitive and specific detection of the antibiotic, ampicillin. Ampicillin (AMPI) is a commonly used antibiotic for treating pathogenic bacteria and is additionally added to livestock feed in agriculture. This study can enable early detection of antibiotic residues, prevent their accumulation in the environment, and ensure compliance with food safety regulations. Herein, the aptasensor was developed with the CRISPR/Cas system by utilizing three different ampicillin-specific aptamers, each conjugated with a biotin at the 5'-end. The ssDNA activator was bound to the aptamers through complementary base pairings. The attraction of the aptamers to the ampicillin target released the bound ssDNA, causing the activation of the CRISPR/Cas system. The DNA reporter probe, labelled with Cy3 and a quencher, turns on the fluorescence signal when cleaved by the activated Cas12a through trans-cleavage measured using a fluorescence spectrophotometer at 590 nm. The fluorescence signal was linearly proportional to the ampicillin target concentration with a 0.01 nM limit of detection and a read-out time of 30 min. This aptasensor showed high sensitivity towards ampicillin even in the presence of other antibiotics. The method was also successfully implemented for ampicillin detection in spiked food samples.

In situ synthesized nanozyme for photoacoustic-imaging-guided photothermal therapy and tumor hypoxia relief

Nanozymes have attracted extensive research interest due to their ideal enzymatic catalytic performance; however, uncontrollable activities and nonspecific accumulation limit their further clinical application. To overcome these obstacles, we proposed in situ synthesized nanozyme, and realized the concept through an intelligent nanosystem (ISSzyme) based on Prussian blue (PB) precursor. PB nanozyme was synthesized at the tumor sites through the interaction of ISSzyme with glutathione, which was demonstrated by comparing with conventional PB nanozyme. ISSzyme is capable of tumor-specific photoacoustic imaging (PAI) and photothermal therapy (PTT), reducing the false-positive signals of PAI and the treatment side effects of PTT. ISSzyme has catalase-like activities, resulting in tumor hypoxia relief and metastasis inhibition. More importantly, the in situ synthesized PB nanozyme has the favorable property of minimal liver accumulation. Considering the above advantages, ISSzyme is expected to shed light on the design of the next-generation artificial enzymes, with many new biomedical applications.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Nanozyme-based pollutant sensing and environmental treatment: Trends, challenges, and perspectives

Nanozymes are defined as nanomaterials exhibiting enzyme-like properties, and they possess both catalytic functions and nanomaterial's unique physicochemical characteristics. Due to the excellent stability and improved catalytic activity in comparison to natural enzymes, nanozymes have established a wide base for applications in environmental pollutants monitoring and remediation. Nanozymes have been applied in the detection of heavy metal ions, molecules, and organic compounds, both quantitatively and qualitatively. Additionally, within the natural environment, nanozymes can be employed for the degradation of organic and persistent pollutants such as antibiotics, phenols, and textile dyes. Further, the potential sphere of applications for nanozymes traverses from indoor air purification to anti-biofouling agents, and even they show promise in combatting pathogenic bacteria. However, nanozymes may have inherent toxicity, which can restrict their widespread utility. Thus, it is important to evaluate and monitor the interaction and transformation of nanozymes towards biosphere damage when employed within the natural environment in a cradle-to-grave manner, to assure their utmost safety. In this context, various studies have concluded that the green synthesis of nanozymes can efficiently overcome the toxicity limitations in real life applications, and nanozymes can be well utilized in the sensing and degradation of several toxic pollutants including metal ions, pesticides, and chemical warfare agents. In this seminal review, we have explored the great potential of nanozymes, whilst addressing a range of concerns, which have often been overlooked and currently restrict widespread applications and commercialization of nanozymes.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Gold Nanozymes: Smart Hybrids with Outstanding Applications

Nanozymes are nanostructured artificial enzymes that have attracted great attention among researchers because of their ability to mimic relevant biological reactions carried out by their natural counterparts, but with the capability to overcome natural enzymes’ drawbacks such as low thermostability or narrow substrate scope. The promising enzyme-like properties of these systems make nanozymes excellent candidates for innovative solutions in different scientific fields such as analytical chemistry, catalysis or medicine. Thus, nanozymes with different type of activities are of special interest owing to their versatility since they can reproduce several biological reactions according to the substrates and the environmental conditions. In this context, gold-based nanozymes are a representative example of multifunctional structures that can perform a great number of enzyme-like activities. In addition, the combination of gold-based materials with structures of organic and inorganic chemical nature yields even more powerful hybrid nanozymes, which enhance their activity by providing improved features. This review will carry out a deep insight into gold-based nanozymes, revisiting not only the different type of biological enzymatic reactions that can be achieved with these kinds of systems, but also structural features of some of the most relevant hybrid gold-based nanozymes described in the literature. This literature review will also provide a representative picture of the potential of these structures to solve future technological challenges.

Applications of Nanozymology in the Detection and Identification of Viral, Bacterial and Fungal Pathogens

Nanozymes are synthetic nanoparticulate materials that mimic the biological activities of enzymes by virtue of their surface chemistry. Enzymes catalyze biological reactions with a very high degree of specificity. Examples include the horseradish peroxidase, lactate, glucose, and cholesterol oxidases. For this reason, many industrial uses of enzymes outside their natural environments have been developed. Similar to enzymes, many industrial applications of nanozymes have been developed and used. Unlike the enzymes, however, nanozymes are cost-effectively prepared, purified, stored, and reproducibly and repeatedly used for long periods of time. The detection and identification of pathogens is among some of the reported applications of nanozymes. Three of the methodologic milestones in the evolution of pathogen detection and identification include the incubation and growth, immunoassays and the polymerase chain reaction (PCR) strategies. Although advances in the history of pathogen detection and identification have given rise to novel methods and devices, these are still short of the response speed, accuracy and cost required for point-of-care use. Debuting recently, nanozymology offers significant improvements in the six methodological indicators that are proposed as being key in this review, including simplicity, sensitivity, speed of response, cost, reliability, and durability of the immunoassays and PCR strategies. This review will focus on the applications of nanozymes in the detection and identification of pathogens in samples obtained from foods, natural, and clinical sources. It will highlight the impact of nanozymes in the enzyme-linked immunosorbent and PCR strategies by discussing the mechanistic improvements and the role of the design and architecture of the nanozyme nanoconjugates. Because of their contribution to world health burden, the three most important pathogens that will be considered include viruses, bacteria and fungi. Although not quite seen as pathogens, the review will also consider the detection of cancer cells and helminth parasites. The review leaves very little doubt that nanozymology has introduced remarkable advances in enzyme-linked immunosorbent assays and PCR strategies for detecting these five classes of pathogens. However, a gap still exists in the application of nanozymes to detect and identify fungal pathogens directly, although indirect strategies in which nanozymes are used have been reported. From a mechanistic point of view, the nanozyme technology transfer to laboratory research methods in PCR and enzyme-linked immunosorbent assay studies, and the point-of-care devices such as electronic biosensors and lateral flow detection strips, that is currently taking place, is most likely to give rise to no small revolution in each of the six methodological indicators for pathogen detection and identification. While the evidence of widespread research reports, clinical trials and point-of-care device patents support this view, the gaps that still exist point to a need for more basic research studies to be conducted on the applications of nanozymology in pathogen detection and identification. The multidisciplinary nature of the research on the application of nanozymes in the detection and identification of pathogens requires chemists and physicists for the design, fabrication, and characterization of nanozymes; microbiologists for the design, testing and analysis of the methodologies, and clinicians or clinical researchers for the evaluation of the methodologies and devices in the clinic. Many reports have also implicated required skills in mathematical modelling, and electronic engineering. While the review will conclude with a synopsis of the impact of nanozymology on the detection and identification of viruses, bacteria, fungi, cancer cells, and helminths, it will also point out opportunities that exist in basic research as well as opportunities for innovation aimed at novel laboratory methodologies and devices. In this regard there is no doubt that there are numerous unexplored research areas in the application of nanozymes for the detection of pathogens. For example, most research on the applications of nanozymes for the detection and identification of fungi is so far limited only to the detection of mycotoxins and other chemical compounds associated with fungal infection. Therefore, there is scope for exploration of the application of nanozymes in the direct detection of fungi in foods, especially in the agricultural production thereof. Many fungal species found in seeds severely compromise their use by inactivating the germination thereof. Fungi also produce mycotoxins that can severely compromise the health of humans if consumed.

Antibacterial Efficacies of Nanostructured Aminoglycosides

The widespread use of broad-spectrum aminoglycoside antibiotics is restricted from various clinical applications due to the emergence of bacterial resistance and the adverse effects such as ototoxicity and nephrotoxicity. The intensive applicability of nanoparticles in modern medicinal chemistry has gained the interest of researchers for modification of aminoglycosides as nanoconjugates either via covalent conjugation or physical interactions to alleviate their undesirable effects and bacterial resistance. In this context, various carbohydrates, polymers, lipids, silver, gold, and silica-attached aminoglycoside nanoparticles have been reported with improvements in physicochemical properties, bioavailability, and biocompatibility in physiological medium. Overall, this review encompassed the synthesis of nanostructured aminoglycosides and their applications in the development of new antibacterial therapeutics.

Regulation Mechanism of ssDNA Aptamer in Nanozymes and Application of Nanozyme-Based Aptasensors in Food Safety

Food safety issues are a worldwide concern. Pathogens, toxins, pesticides, veterinary drugs, heavy metals, and illegal additives are frequently reported to contaminate food and pose a serious threat to human health. Conventional detection methods have difficulties fulfilling the requirements for food development in a modern society. Therefore, novel rapid detection methods are urgently needed for on-site and rapid screening of massive food samples. Due to the extraordinary properties of nanozymes and aptamers, biosensors composed of both of them provide considerable advantages in analytical performances, including sensitivity, specificity, repeatability, and accuracy. They are considered a promising complementary detection method on top of conventional ones for the rapid and accurate detection of food contaminants. In recent years, we have witnessed a flourishing of analytical strategies based on aptamers and nanozymes for the detection of food contaminants, especially novel detection models based on the regulation by single-stranded DNA (ssDNA) of nanozyme activity. However, the applications of nanozyme-based aptasensors in food safety are seldom reviewed. Thus, this paper aims to provide a comprehensive review on nanozyme-based aptasensors in food safety, which are arranged according to the different interaction modes of ssDNA and nanozymes: aptasensors based on nanozyme activity either inhibited or enhanced by ssDNA, nanozymes as signal tags, and other methods. Before introducing the nanozyme-based aptasensors, the regulation by ssDNA of nanozyme activity via diverse factors is discussed systematically for precisely tailoring nanozyme activity in biosensors. Furthermore, current challenges are emphasized, and future perspectives are discussed.

Preparation of Fe3O4@PDA@Au@GO Composite as SERS Substrate and Its Application in the Enrichment and Detection for Phenanthrene

In this study, highly active Fe₃O₄@PDA@Au@GO surface-enhanced Raman spectroscopy (SERS) active substrate was synthesized for application in the enrichment and detection of trace polycyclic aromatic hydrocarbons (PAHs) in the environment. The morphology and structure were characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and UV–visible absorption spectrum (UV–vis spectra). The effect of each component of Fe₃O₄@PDA@Au@GO nanocomposites on SERS was explored, and it was found that gold nanoparticles (Au NPs) are crucial to enhance the Raman signal based on the electromagnetic enhancement mechanism, and apart from enriching the PAHs through π–π interaction, graphene oxide (GO) also generates strong chemical enhancement of Raman signals, and polydopamine (PDA) can prevent Au from shedding and agglomeration. The existence of Fe3O4 aided the quick separation of substrate from the solutions, which greatly simplified the detection procedure and facilitated the reuse of the substrate. The SERS active substrate was used to detect phenanthrene in aqueous solution with a detection limit of 10⁻⁷ g/L (5.6 × 10⁻¹⁰ mol/L), which is much lower than that of ordinary Raman, it is promising for application in the enrichment and detection of trace PAHs.

Recent progress in the design of analytical methods based on nanozymes

Nanomaterials with intrinsic enzyme-like properties (nanozymes) have attracted growing interest owing to their striking merits over the traditional enzymes, such as low cost, easy surface modification, high stability and robustness, and tunable activity. These features enable them to be considered as a potent substitute for natural enzymes to construct novel analytical platforms to detect various analytes from small molecules to proteins and cells. In this review, we focus on recent advances in the design strategies using nanozyme catalytic mediated signal amplification for sensing applications. The progress of nanozyme-based analytical systems in the detection of different types of analytes, including ions, small biomolecules, biomacromolecules and others, is summarized. Furthermore, the future challenges and opportunities of nanozyme-based analytical methods are discussed.

Sensitive colorimetric glucose sensor by iron-based nanozymes with controllable Fe valence

The proportion of Fe2+ and Fe3+ in Fe-based nanozymes is a key point in determining their catalytic activity. However, it is hard to adjust the Fe2+/Fe3+ ratio in nanozyme systems to achieve the best catalytic performance. In this work, we successfully regulate Fe2+/Fe3+ ratios in a wide range of 0.81-1.45 based on a novel porous platform of Fe doped silica hollow spheres. The homogeneous distribution and stable fixation of Fe components in Fe doped silica hollow spheres facilitate the valence regulation of Fe in the reduction heating in H2/Ar. When the Fe doped spheres (FeOx@SHSs) were used as nanozymes, different Fe2+/Fe3+ ratios have shown to influence the peroxidase-like catalytic activity greatly. The highest activity at the ratio of 1.41 should be due to the combined effects of the accelerated reaction rate by Fe2+ and the enhanced catalytic cycle efficiency by Fe3+. The FeOx@SHSs-based nanozyme is further applied to construct a facile colorimetric biosensing system, which exhibited extremely sensitive determination of glucose. This work presents an effective platform for controlling Fe valences and optimizing the peroxidase-like activity for catalytic processes or sensing systems.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.

Particle-in-a-frame gold nanomaterials with an interior nanogap-based sensor array for versatile analyte detection

In this work, we studied the catalytic performance of gold nanomaterials, specifically a particle-in-a-frame nanostructure (PIAF) with interior nanogaps. Au PIAF was used to catalyse the 3,3',5,5'-tetramethylbenzidine (TMB) reaction. This array could accurately identify 7 proteins, 5 antioxidants, and 3 cell types.

Recent Advances and a Roadmap to Aptamer-Based Sensors for Bloodstream Infections

The present review is intended to describe bloodstream infections (BSIs), the major pathogens responsible for BSIs, conventional tests and their limitations, commercially available methods used, and the aptamer and nanomaterials-based approaches developed so far for the detection of BSIs. The advantages associated with aptamers and the aptamer-based sensors, the comparison between the aptamers and the antibodies, and the various types of aptasensors developed so far for the detection of bloodstream infections have been described in detail in the present review. Also, the future outlook and roadmap toward aptamer-based sensors and the challenges associated with the aptamer development have also been concluded in this review.

L-Cysteine as an Irreversible Inhibitor of the Peroxidase-Mimic Catalytic Activity of 2-Dimensional Ni-Based Nanozymes

The ability to modulate the catalytic activity of inorganic nanozymes is of high interest. In particular, understanding the interactions of inhibitor molecules with nanozymes can bring them one step closer to the natural enzymes and has thus started to attract intense interest. To date, a few reversible inhibitors of the nanozyme activity have been reported. However, there are no reports of irreversible inhibitor molecules that can permanently inhibit the activity of nanozymes. In the current work, we show the ability of L-cysteine to act as an irreversible inhibitor to permanently block the nanozyme activity of 2-dimensional (2D) NiO nanosheets. Determination of the steady state kinetic parameters allowed us to obtain mechanistic insights into the catalytic inhibition process. Further, based on the irreversible catalytic inhibition capability of L-cysteine, we demonstrate a highly specific sensor for the detection of this biologically important molecule.

Advances in Gold Nanoparticles-Based Colorimetric Aptasensors for the Detection of Antibiotics: An Overview of the Past Decade

Misuse of antibiotics has recently been considered a global issue because of its harmful effects on human health. Since conventional methods have numerous limitations, it is necessary to develop fast, simple, sensitive, and reproducible methods for the detection of antibiotics. Among numerous recently developed methods, aptasensors are fascinating because of their good specificity, sensitivity and selectivity. These kinds of biosensors combining aptamer with colorimetric applications of gold nanoparticles to recognize small molecules are becoming more popular owing to their advantageous features, for example, low cost, ease of use, on-site analysis ability using naked eye and no prerequisite for modern equipment. In this review, we have highlighted the recent advances and working principle of gold nanoparticles based colorimetric aptasensors as promising methods for antibiotics detection in different food and environmental samples (2011–2020). Furthermore, possible advantages and disadvantages have also been summarized for these methods. Finally, the recent challenges, outlook, and promising future perspectives for developing novel aptasensors are also considered.

A signal-on fluorescent aptasensor based on gold nanoparticles for kanamycin detection

This study describes the development, verification and practical application of an aptasensor for the fluorometric detection of kanamycin. Using the nucleic acid aptamer with FAM fluorescent group as the conjugate, using gold nanoparticles as the fluorescence dynamic quenching source, a fluorescence sensor was fabricated through the signal-on method for the micro-detection of kanamycin. The nucleic acid chimera is connected to the fluorophore, and the gold nanoparticles are used as the fluorescence dynamic quenching source under actual conditions. The detection limit of kanamycin is 0.1 pM, and the detection range is 0.1 pM to 0.1 μM. This biosensor works satisfactorily in complex samples with no impurities, which gives this method an obvious advantage over other analytical methods. In addition, the mechanism of action between gold nanoparticles/FAM-aptamer/kanamycin is discussed and studied in depth here. It provides a more thorough analysis and more application possibilities for fluorescence-aptamer biosensing.

Regulating Valence States of Gold Nanocluster as a New Strategy for the Ultrasensitive Electrochemiluminescence Detection of Kanamycin

Monitoring of kanamycin residue has attracted considerable attention owing to the potential harm caused by the abuse of kanamycin. However, the detection of kanamycin has been limited owing to its electrochemical and optical inertness. Herein, we report a facile and highly efficient electrochemiluminescence (ECL) strategy for the detection of kanamycin based on the valence state effect of gold nanocluster (AuNC) probes. It is proven that Au⁰ in chemically reduced AuNCs (CR-AuNCs) could be oxidized to Au^I via the redox reaction between kanamycin and CR-AuNCs in the presence of H₂O₂, resulting in ECL quenching due to the valence state change of CR-AuNCs. Because the ECL of the AuNC probes is sensitively affected by the valence state, excellent sensitivity for kanamycin was achieved without any signal amplification operation and aptamers. A preferable linear-dependent curve was acquired in the detection range from 1.0 × 10^-11 to 3.3 × 10^-5 M with an extremely low detection limit of 1.5 × 10^-12 M. The proposed kanamycin sensing platform is very simple and shows high selectivity and an extremely broad linear range detection of kanamycin. Furthermore, the proposed sensing platform can detect kanamycin in milk samples with excellent recoveries. Therefore, this sensing strategy provides an effective and facile way to detect kanamycin and can help promote the understanding of the constructed mechanism of the AuNC-based ECL system, thus greatly broadening its potential application in ECL fields.