Effect of temperature on polaronic transport in CeO2 thin-film

The outstanding catalytic property of cerium oxide (CeO2) strongly depends on the polaron formation due to the oxygen vacancy (V̈O) defect and Ce4+ to Ce3+ transformation. Temperature plays an important role in the case of polaron generation in CeO2 and highly influences its electrical transport properties. Therefore, a much needed attention is required for detailed understanding of the effect of temperature on polaron formation and oxygen vacancy migration to get an idea about the improvement in the redox property of ceria. In this work, we have probed the generation of polarons in CeO2 thin-film deposited on a silicon (Si) substrate using the resonance photoemission spectroscopy (RPES) study. The RPES data show an increase in polaron density at the substrate-film interface of the thermally annealed film, indicating the formation of an interfacial Ce2O3 layer, which is, indeed, a phase change from the cubic to hexagonal structure. This leads to a modified electronic band structure, which has an impact on the capacitance-voltage (C-V) characteristics. This result nicely correlates the microscopic property of polarons and the macroscopic transport property of ceria.

Single-Atom Catalysis: Insights from Model Systems

The field of single-atom catalysis (SAC) has expanded greatly in recent years. While there has been much success developing new synthesis methods, a fundamental disconnect exists between most experiments and the theoretical computations used to model them. The real catalysts are based on powder supports, which inevitably contain a multitude of different facets, different surface sites, defects, hydroxyl groups, and other contaminants due to the environment. This makes it extremely difficult to determine the structure of the active SAC site using current techniques. To be tractable, computations aimed at modeling SAC utilize periodic boundary conditions and low-index facets of an idealized support. Thus, the reaction barriers and mechanisms determined computationally represent, at best, a plausibility argument, and there is a strong chance that some critical aspect is omitted. One way to better understand what is plausible is by experimental modeling, i.e., comparing the results of computations to experiments based on precisely defined single-crystalline supports prepared in an ultrahigh-vacuum (UHV) environment. In this review, we report the status of the surface-science literature as it pertains to SAC. We focus on experimental work on supports where the site of the metal atom are unambiguously determined from experiment, in particular, the surfaces of rutile and anatase TiO2, the iron oxides Fe2O3 and Fe3O4, as well as CeO2 and MgO. Much of this work is based on scanning probe microscopy in conjunction with spectroscopy, and we highlight the remarkably few studies in which metal atoms are stable on low-index surfaces of typical supports. In the Perspective section, we discuss the possibility for expanding such studies into other relevant supports.

Redox-mediated C-C bond scission in alcohols adsorbed on CeO2-xthin films

The decomposition mechanisms of ethanol and ethylene glycol on well-ordered stoichiometric CeO₂(111) and partially reduced CeO_2-x(111) films were investigated by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, and temperature programmed desorption. Both alcohols partially deprotonate upon adsorption at 150 K and subsequent annealing yielding stable ethoxy and ethylenedioxy species. The C-C bond scission in both ethoxy and ethylenedioxy species on stoichiometric CeO₂(111) involves formation of acetaldehyde-like intermediates and yields CO and CO₂accompanied by desorption of acetaldehyde, H₂O, and H₂. This decomposition pathway leads to the formation of oxygen vacancies. In the presence of oxygen vacancies, C-O bond scission in ethoxy species yields C₂H₄. In contrast, C-C bond scission in ethylenedioxy species on the partially reduced CeO_2-x(111) is favored with respect to C-O bond scission and yields methanol, formaldehyde, and CO accompanied by the desorption of H₂O and H₂. Still, scission of C-O bonds on both sides of the ethylenedioxy species yields minor amounts of accompanying C₂H₄and C₂H₂. C-O bond scission is coupled with a partial recovery of the lattice oxygen in competition with its removal in the form of water.

Tailoring the Local Environment of Platinum in Single-Atom Pt1 /CeO2 Catalysts for Robust Low-Temperature CO Oxidation

A single-atom Pt₁ /CeO₂ catalyst formed by atom trapping (AT, 800 °C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over-stabilization of Pt²⁺ in a highly symmetric square-planar Pt₁ O₄ coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. Herein we show that tailoring the local environment of isolated Pt²⁺ by thermal-shock (TS) synthesis leads to a highly active and thermally stable Pt₁ /CeO₂ catalyst. Ultrafast shockwaves (>1200 °C) in an inert atmosphere induced surface reconstruction of CeO₂ to generate Pt single atoms in an asymmetric Pt₁ O₄ configuration. Owing to this unique coordination, Pt₁ ^δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low-temperature performance. CO oxidation reactivity on the Pt₁ /CeO₂ _TS catalyst was retained under oxidizing conditions.

Exploiting micro-scale structural and chemical observations in real time for understanding chemical conversion: LEEM/PEEM studies over CeOx-Cu(111)

Proper consideration of length-scales is critical for elucidating active sites/phases in heterogeneous catalysis, revealing chemical function of surfaces and identifying fundamental steps of chemical reactions. Using the example of ceria thin films deposited on the Cu(111) surface, we demonstrate the benefits of multi length-scale experimental framework for understanding chemical conversion. Specifically, exploiting the tunable sampling and spatial resolution of photoemission electron microscopy, we reveal crystal defect mediated structures of inhomogeneous copper-ceria mixed phase that grow during preparation of ceria/Cu(111) model systems. The density of the microsized structures is such that they are relevant to the chemistry, but unlikely to be found during investigation at the nanoscale or with atomic level investigations. Our findings highlight the importance of accessing micro-scale when considering chemical pathways over heteroepitaxially grown model systems.

Oxide-based nanomaterials for fuel cell catalysis: the interplay between supported single Pt atoms and particles

Nanomaterials coated with atomically dispersed platinum on ceria are structurally dynamic and show high potential for applications in fuel cells.

Highly Active and Stable Pt-Loaded Ce0.75Zr0.25O2 Yolk-Shell Catalyst for Water-Gas Shift Reaction

Multishelled, Pt-loaded Ce0.75Zr0.25O2 yolk-shell microspheres were prepared by a simple spray pyrolysis process for use in the water-gas shift (WGS) reaction. The Pt-loading was optimized, obtaining highly active Pt/Ce0.75Zr0.25O2 yolk-shell nanostructures for the WGS. Of the prepared catalysts, a 2% Pt loading of the Ce0.75Zr0.25O2 yolk-shell microspheres showed the highest CO conversion. The high catalytic activity of the 2% Pt/Ce0.75Zr0.2O2 catalyst was mainly due to its easier reducibility and the maintenance of active catalytic Pt species. The Pt-loaded Ce0.75Zr0.25O2 catalyst microspheres were highly resistant to Pt sintering because of their unique yolk-shell structure. Spray pyrolysis was found to be highly efficient for the production of precious-metal-loaded, multicomponent metal oxide yolk-shell microspheres for catalytic applications.

Platinum carbonyl clusters stabilized by Sn(ii)-based fragments: syntheses and structures of [Pt6(CO)6(SnCl2)2(SnCl3)4]4−, [Pt9(CO)8(SnCl2)3(SnCl3)2(Cl2SnOCOSnCl2)]4−and [Pt10(CO)14{Cl2Sn(OH)SnCl2}2]2−

Low valent Pt carbonyl clusters decorated by Sn(ii) fragments have been obtained from [Pt₁₅(CO)₃₀]²⁻and SnCl₂.

Metal–support interaction in Pd/CeO2 model catalysts for CO oxidation: from pulsed laser-ablated nanoparticles to highly active state of the catalyst

Highly active Pd/CeO₂ catalysts were synthesized from nanosized Pd and ceria obtained by PLA.

Reactivity of atomically dispersed Pt2+ species towards H2: model Pt–CeO2 fuel cell catalyst

Formation of at least two oxygen vacancies triggers the reduction of one Pt²⁺ species.