Recent advances in droplet sequential monitoring methods for droplet sorting

Droplet microfluidics is an attractive technology to run parallel experiments with high throughput and scalability while maintaining the heterogeneous features of individual samples or reactions. Droplet sorting is utilized to collect the desired droplets based on droplet characterization and in-droplet content evaluation. A proper monitoring method is critical in this process, which governs the accuracy and maximum frequency of droplet handling. Until now, numerous monitoring methods have been integrated in the microfluidic devices for identifying droplets, such as optical spectroscopy, mass spectroscopy, electrochemical monitoring, and nuclear magnetic resonance spectroscopy. In this review, we summarize the features of various monitoring methods integrated into droplet sorting workflow and discuss their suitable condition and potential obstacles in use. We aim to provide a systematic introduction and an application guide for choosing and building a droplet monitoring platform.

Advances in droplet microfluidics for SERS and Raman analysis

Raman spectroscopy can realize qualitative and quantitative characterization, and surface-enhanced Raman spectroscopy (SERS) can further enhance its detection sensitivity. In combination with droplet microfluidics, some significant but insurmountable limitations of SERS and Raman spectroscopy can be overcome to some extent, thus improving their detection capability and extending their application. During the past decade, these systems have constantly developed and demonstrated a great potential in more applications, but there is no new review systematically summarizing the droplet microfluidics-based Raman and SERS analysis system since the first related review was published in 2011. Thus, there is a great need for a new review to summarize the advances. In this review, we focus on droplet microfluidics-based Raman and SERS analysis, and summarize two mainstream research directions on this topic up to now. The one is SERS or Raman detection in the moving droplet microreactors, including analysis of molecules, single cells and chemical reaction processes. The other one is SERS active microparticle fabrication via microfluidic droplet templates covering polymer matrix and photonic crystal microparticles. We also comment on the advantages, disadvantage and correlation resolution of droplet microfluidics for SERS or Raman. Finally, we summarize these systems and illustrate our perspectives for future research directions in this field.

Recent progress of microfluidics in surface-enhanced Raman spectroscopic analysis

Surface-enhanced Raman spectroscopy is a significant analytical tool capable of fingerprint identification of molecule in a rapid and ultrasensitive manner. However, it is still hard to meet the requirements of practical sample analysis. The introduction of microfluidics can effectively enhance the performance of surface-enhanced Raman spectroscopy in complex sample analysis including reproducibility, selectivity, sensitivity, and speed. This review summarizes the recent progress of microfluidics in surface-enhanced Raman spectroscopic analysis through four combination approaches. First, microfluidic synthetic techniques offer uniform nano-/microparticle fabrication approaches for reproductive surface-enhanced Raman spectroscopic analysis. Second, the integration of microchip and surface-enhanced Raman spectroscopic substrate provides advanced devices for sensitive and efficient detection. Third, microfluidic sample preparations enable rapid separation and preconcentration of analyte prior to surface-enhanced Raman spectroscopic detection. Fourth, highly integrated microfluidic devices can be employed to realize multistep surface-enhanced Raman spectroscopic analysis containing material fabrication, sample preparation, and detection processes. Furthermore, the challenges and outlooks of the application of microfluidics in surface-enhanced Raman spectroscopic analysis are discussed.

Raman spectroscopy for the qualitative and quantitative analysis of solid dosage forms of Sitagliptin

To demonstrate the potential of Raman spectroscopy for the qualitative and quantitative analysis of solid dosage pharmacological formulations, different concentrations of Sitagliptin, an Active Pharmaceutical Ingredient (API) currently prescribed as an anti-diabetic drug, are characterised. Increase of the API concentrations induces changes in the Raman spectral features specifically associated with the drug and excipients. Principal Component Analysis (PCA) and Partial Least Squares Regression (PLSR), were used for the qualitative and quantitative analysis of the spectral responses. A PLSR model is constructed which enables the prediction of different concentrations of drug in the complex excipient matrices. During the development of the prediction model, the Root Mean Square Error of Cross Validation (RMSECV) was found to be 0.36 mg and the variability explained by the model, according to the (R²) value, was found to be 0.99. Moreover, the concentration of the API in the unknown sample was determined. This concentration was predicted to be 64.28/180 mg (w/w), compared to the 65/180 mg (w/w). These findings demonstrate Raman spectroscopy coupled to PLSR analysis to be a reliable tool to verify Sitagliptin contents in the pharmaceutical samples based on calibration models prepared under laboratory conditions.

Raman spectroscopy along with Principal Component Analysis for the confirmation of Silver(I)-N-heterocyclic carbene complex formation

In this study Raman spectroscopy is employed for the characterization of two different ligands called as S1 and S2 and their respective co-ordinate complexes called C1 and C2. Specific Raman spectral signatures are observed for each of these Silver(I)-N-heterocyclic carbene complexes Ag(I)-(NHCs), which can be associated with the imidazolium ring, part of both of the ligands, indicating the formation of new coordinate covalent bond. For the detailed analysis, Raman spectral data of these ligands and complexes is analyzed by multivariate data analysis technique, Principal Component Analysis (PCA) which is found very helpful to differentiate two ligands and complexes from each other. The significant Raman peaks with higher intensities in the complexes as compared to the respective ligands are associated with imidazole ring which can be attributed to the enhanced polarizability of this ring on complex formation. Moreover, the spectral features associated with (AgC) bond are observed with higher intensity at 360 in (C1) and 383 in (C2). This study indicates the potential of Raman spectroscopy for the characterization and confirmation of formation of organometallic complexes and other chemical products.

A review on recent advances in the applications of surface-enhanced Raman scattering in analytical chemistry

This review is focused on recent developments of surface-enhanced Raman scattering (SERS) applications in Analytical Chemistry. The work covers advances in the fabrication methods of SERS substrates, including nanoparticles immobilization techniques and advanced nanopatterning with metallic features. Recent insights in quantitative and sampling methods for SERS implementation and the development of new SERS-based approaches for both qualitative and quantitative analysis are discussed. The advent of methods for pre-concentration and new approaches for single-molecule SERS quantification, such as the digital SERS procedure, has provided additional improvements in the analytical figures-of-merit for analysis and assays based on SERS. The use of metal nanostructures as SERS detection elements integrated in devices, such as microfluidic systems and optical fibers, provided new tools for SERS applications that expand beyond the laboratory environment, bringing new opportunities for real-time field tests and process monitoring based on SERS. Finally, selected examples of SERS applications in analytical and bioanalytical chemistry are discussed. The breadth of this work reflects the vast diversity of subjects and approaches that are inherent to the SERS field. The state of the field indicates the potential for a variety of new SERS-based methods and technologies that can be routinely applied in analytical laboratories.

Construction of optimized Au@Ag core-shell nanorods for ultralow SERS detection of antibiotic levofloxacin molecules

The abuse of antibiotics in animal husbandry has been regarded as a daunting public health risk, facilitating the emergence and spread of resistant pathogens to humans. Herein, bimetallic Au@Ag core-shell nanorods (NRs) with precise, controllable Ag shell-thickness (2.1~14.1 nm) were fabricated and developed for ultralow detection of levofloxacin molecules using surface enhanced Raman scattering spectroscopy (SERS). We found that the Au@Ag NRs with 7.3 nm Ag shell-thickness provided maximized SERS activity in comparison with other as-prepared nanosubstrates in this paper. The detection limit of levofloxacin molecules was achieved at a nanomole (nM) level of 0.37 ng/L (10^-9 M), providing ultrasensitive assessment of antibiotics in natural ecosystems.

Development of an electrochemical surface-enhanced Raman spectroscopy (EC-SERS) fabric-based plasmonic sensor for point-of-care diagnostics

A plasmonic fabric-based electrode has been developed for wearable EC-SERS sensing for point-of-care applications.

Photonic monitoring of treatment during infection and sepsis: development of new detection strategies and potential clinical applications

Despite the strong decline in the infection-associated mortality since the development of the first antibiotics, infectious diseases are still a major cause of death in the world. With the rising number of antibiotic-resistant pathogens, the incidence of deaths caused by infections may increase strongly in the future. Survival rates in sepsis, which occurs when body response to infections becomes uncontrolled, are still very poor if an adequate therapy is not initiated immediately. Therefore, approaches to monitor the treatment efficacy are crucially needed to adapt therapeutic strategies according to the patient's response. An increasing number of photonic technologies are being considered for diagnostic purpose and monitoring of therapeutic response; however many of these strategies have not been introduced into clinical routine, yet. Here, we review photonic strategies to monitor response to treatment in patients with infectious disease, sepsis, and septic shock. We also include some selected approaches for the development of new drugs in animal models as well as new monitoring strategies which might be applicable to evaluate treatment response in humans in the future. Figure Label-free probing of blood properties using photonics.

Selectivity/Specificity Improvement Strategies in Surface-Enhanced Raman Spectroscopy Analysis

Surface-enhanced Raman spectroscopy (SERS) is a powerful technique for the discrimination, identification, and potential quantification of certain compounds/organisms. However, its real application is challenging due to the multiple interference from the complicated detection matrix. Therefore, selective/specific detection is crucial for the real application of SERS technique. We summarize in this review five selective/specific detection techniques (chemical reaction, antibody, aptamer, molecularly imprinted polymers and microfluidics), which can be applied for the rapid and reliable selective/specific detection when coupled with SERS technique.

The power of solid supports in multiphase and droplet-based microfluidics: towards clinical applications

Multiphase and droplet microfluidic systems are growing in relevance in bioanalytical-related fields, especially due to the increased sensitivity, faster reaction times and lower sample/reagent consumption of many of its derived bioassays. Often applied to homogeneous (liquid/liquid) reactions, innovative strategies for the implementation of heterogeneous (typically solid/liquid) processes have recently been proposed. These involve, for example, the extraction and purification of target analytes from complex matrices or the implementation of multi-step protocols requiring efficient washing steps. To achieve this, solid supports such as functionalized particles (micro or nanometric) presenting different physical properties (e.g. magnetic, optical or others) are used for the binding of specific entities. The manipulation of such supports with different microfluidic principles has both led to the miniaturization of existing biomedical protocols and the development of completely new strategies for diagnostics and research. In this review, multiphase and droplet-based microfluidic systems using solid suspensions are presented and discussed with a particular focus on: i) working principles and technological developments of the manipulation strategies and ii) applications, critically discussing the level of maturity of these systems, which can range from initial proofs of concept to real clinical validations.

Detection of Pseudomonas aeruginosa Metabolite Pyocyanin in Water and Saliva by Employing the SERS Technique

Pyocyanin (PYO) is a metabolite specific for Pseudomonas aeruginosa. In the case of immunocompromised patients, it is currently considered a biomarker for life-threating Pseudomonas infections. In the frame of this study it is shown, that PYO can be detected in aqueous solution by employing surface-enhanced Raman spectroscopy (SERS) combined with a microfluidic platform. The achieved limit of detection is 0.5 μM. This is ~2 orders of magnitude below the concentration of PYO found in clinical samples. Furthermore, as proof of principle, the SERS detection of PYO in the saliva of three volunteers was also investigated. This body fluid can be collected in a non-invasive manner and is highly chemically complex, making the detection of the target molecule challenging. Nevertheless, PYO was successfully detected in two saliva samples down to 10 μM and in one sample at a concentration of 25 μM. This indicates that the molecules present in saliva do not inhibit the efficient adsorption of PYO on the surface of the employed SERS active substrates.

Rapid fabrication of silver nanoparticle-coated filter paper as SERS substrate for low-abundance molecules detection

Silver nanoparticles (Ag NPs) were fabricated on the fibers of the filter paper by the reaction between silver nitrate (AgNO₃) and hydrazine hydrate (N₂H₄·H₂O). By using the Ag NPs-coated paper, the limit of detection as low as 10^-11M for Rhodamine B (RhB) and 10^-10M for crystal violet (CV) was achieved. Moreover, the uniformity, reproducibility and stability of the Ag NPs-coated paper were also involved. Meanwhile, the detection of 10^-4-10^-6M moxifloxacin in deionized water and tap water was also carried out successfully by using the paper-based substrates. The fabrication process is easy to handle, cost-efficient and the as-prepared paper-based SERS substrate is ideal for rapid and simple detection of low-abundance molecules.

Plasmonic nanostructures for surface enhanced spectroscopic methods

The development within the last five years in the field of surface enhanced spectroscopy methods was comprehensively reviewed.

Raman spectroscopy towards clinical application: drug monitoring and pathogen identification

Raman spectroscopy is a label-free method that measures quickly and contactlessly, providing detailed information from the sample, and has proved to be an ideal tool for medical and life science research. In this review, recent advances of the technique towards drug monitoring and pathogen identification by the Jena Research Groups are reviewed. Surface-enhanced Raman spectroscopy (SERS) and ultraviolet resonance Raman spectroscopy in hollow-core optical fibres enable the detection of drugs at low concentrations as shown for the metabolites of the immunosuppressive drug 6-mercaptopurine as well as antimalarial agents. Furthermore, Raman spectroscopy can be used to characterise pathogenic bacteria in infectious diseases directly from body fluids, making time-consuming cultivation processes dispensable. Using the example of urinary tract infection, it is shown how bacteria can be identified from patients' urine samples within <1 h. The methods cover both single-cell analysis and dielectrophoretic capturing of bacteria in suspension. The latter method could also be used for fast (<3.5 h) identification of antibiotic resistance as shown exemplarily for vancomycin-resistant enterococci.

Enzyme engineering in biomimetic compartments

The success of a directed evolution approach to creating custom-made enzymes relies in no small part on screening as many clones as possible. The miniaturisation of assays into pico to femtoliter compartments (emulsion droplets, vesicles or gel-shell beads) makes directed evolution campaigns practically more straightforward than current large scale industrial screening that requires liquid handling equipment and much manpower. Several recent experimental formats have established protocols to screen more than 10 million compartments per day, representing unprecedented throughput at low cost. This review introduces the emerging approaches towards making biomimetic man-made compartments that are poised to be adapted by a wider circle of researchers. In addition to cost and time saving, control of selection pressures and conditions, the quantitative readout that reports on every library members and the ability to develop strategies based on these data will increase the degrees of freedom in designing and testing strategies for directed evolution experiments.