The role of nano-sized manganese oxides in the oxygen-evolution reactions by manganese complexes: towards a complete picture

Further Insight into the Conversion of a Ni-Fe Metal-Organic Framework during Water-Oxidation Reaction

Metal-organic frameworks (MOFs) are extensively investigated as catalysts in the oxygen-evolution reaction (OER). A Ni-Fe MOF with 2,5-dihydroxy terephthalate as a linker has been claimed to be among the most efficient catalysts for the oxygen-evolution reaction (OER) under alkaline conditions. Herein, the MOF stability under the OER was reinvestigated by electrochemical methods, X-ray diffraction, X-ray absorption spectroscopy, energy-dispersive spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy, nuclear magnetic resonance, operando visible spectroscopy, electrospray ionization mass spectroscopy, and Raman spectroscopy. The peaks corresponding to the carboxylate group are observed at 1420 and 1520 cm^-1 using Raman spectroscopy. The peaks disappear after the reaction, suggesting the removal of the carboxylate group. A drop in carbon content but growth in oxygen content after the OER was detected by energy-dispersive spectra. This shows that after the OER, the surface of MOF is oxidized. SEM images also show deep restructures in the surface morphology of this Ni-Fe MOF after the OER. Nuclear magnetic resonance and electrospray ionization mass spectrometry show the decomposition of the linker in alkaline conditions and even in the absence of potential. These experimental data indicate that during the OER, the synthesized MOF transforms to a Fe-Ni-layered double hydroxide, and the formed metal oxide is a candidate for the OER catalysis. Generalization is not true; however, taken together, these findings suggest that the stability of Ni-Fe MOFs under harsh oxidation conditions should be reconsidered.

Finding the True Catalyst for Water Oxidation at Low Overpotential in the Presence of a Metal Complex

The design of molecular-based catalysts for oxygen-evolution reaction (OER) requires more investigations for the true catalyst to be found. First-row transition metal complexes are extensively investigated for OER, but the role of these metal complexes as a true catalyst is doubtful. Some doubts have been expressed about the role of first-row transition metal complexes for OER at high overpotentials (η > 450). Generally, the detection of the true catalyst has so far been focused on high overpotentials (η > 450) because at low overpotentials (η < 450), many methods are not sensitive enough to detect small amounts of heterogeneous catalysts on the electrode surface during the first seconds of the reaction. Ni(II) phthalocyanine-tetra sulfonate tetrasodium (1) is in moderate conditions (at 20-50 °C and pH 5-13) in the absence of electrochemical driving forces, which could make it noteworthy for OER. Herein, the results of OER in the presence of 1 at low overpotentials under alkaline conditions are presented. In addition, in the presence of Ni complexes, using an Fe ion is introduced as a new method for detecting Ni (hydr)oxide under OER. Our experiments indicate that in the presence of a homogeneous OER (pre)catalyst, a deep investigation is necessary to rule out the heterogeneous catalysts formed. Our approach is a roadmap in the field of catalysis to understand the OER mechanism in the presence of a molecular Ni-based catalyst design. Our results shown in this study are likely to open up new perspectives and discussion on many molecular catalysts in a considerable part of the chemistry community.

Surprisingly Low Reactivity of Layered Manganese Oxide toward Water Oxidation in Fe/Ni-Free Electrolyte under Alkaline Conditions

So far, many studies on the oxygen-evolution reaction (OER) by Mn oxides have been focused on activity; however, the identification of the best performing active site and corresponding catalytic cycles is also of critical importance. Herein, the real intrinsic activity of layered Mn oxide toward OER in Fe/Ni-free KOH is studied for the first time. At pH ≈ 14, the onset of OER for layered Mn oxide in the presence of Fe/Ni-free KOH happens at 1.72 V (vs reversible hydrogen electrode (RHE)). In the presence of Fe ions, a 190 mV decrease in the overpotential of OER was recorded for layered Mn oxide as well as a significant decrease (from 172.8 to 49 mV/decade) in the Tafel slope. Furthermore, we find that both Ni and Fe ions increase OER remarkably in the presence of layered Mn oxide, but that pure layered Mn oxide is not an efficient catalyst for OER without Ni and Fe under alkaline conditions. Thus, pure layered Mn oxide and electrolytes are critical factors in finding the real intrinsic activity of layered Mn oxide for OER. Our results call into question the high efficiency of layered Mn oxides toward OER under alkaline conditions and also elucidate the significant role of Ni and Fe impurities in the electrolyte in the presence of layered Mn oxide toward OER under alkaline conditions. Overall, a computational model supports the conclusions from the experimental structural and electrochemical characterizations. In particular, substitutional doping with Fe decreases the thermodynamic OER overpotential up to 310 mV. Besides, the thermodynamic OER onset potential calculated for the Fe-free structures is higher than 1.7 V (vs RHE) and, thus, not in the stability range of Mn oxides.

Homogeneous or heterogeneous electrocatalysis: reinvestigation of a cobalt coordination compound for water oxidation

A cobalt coordination compound with azo-ligand linkers combined with linked bisulfonate moieties has been argued to be an efficient catalyst for the oxygen-evolution reaction (OER) (H.-T. Shi, X.-X. Li, F.-H. Wu and W.-B. Yu, Dalton Trans., 2017, 46, 16321.). In the previously published report, this cobalt compound (compound 1) was believed to display a high turnover frequency (5 s^-1) at η = 720 mV at pH 9. Herein, the OER in the presence of compound 1 is reinvestigated. The nanosized oxide-based particles formed after the OER in the presence of compound 1 were tracked by electrochemical methods, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), X-ray diffraction studies (XRD), (High-resolution) transmission electron microscopy ((HR)TEM), Raman spectroscopy, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). Based on these experiments, it is proposed that a candidate for the true catalyst of the OER in the presence of compound 1 is cobalt oxide. During the OER and using chronoamperometry, the oxidation state of Co ions for the formed Co oxide is (III), but after consecutive CVs the oxidation states of Co ions for the formed Co oxide are (II) and (III). The results shed new light on the role of Co oxide nanoparticles formed in the presence of this Co coordination compound during the OER. Our experimental data also show that for the OER in the presence of a homogeneous (pre)catalyst, careful analyses to find the role of metal oxides are necessary for informed progress. The present findings also might help to find the mechanism of the OER in the presence of coordination compounds.

New findings and current controversies in the reaction of ruthenium red and ammonium cerium(iv) nitrate: focus on the precipitated compound

During water-oxidation reaction in the presence of RuR and CAN, a heterogeneous nano-sized Ru-Ce compound is detected, which is formed by the interaction of [(NH₃)₅RuORu(NH₃)₄ORu(NH₃)₅],^6+/7+ nitrate ions, and the products of the reduction of CAN.

Electrochemical water oxidation by simple manganese salts

Recently, it has been great efforts to synthesize an efficient water-oxidizing catalyst. However, to find the true catalyst in the harsh conditions of the water-oxidation reaction is an open area in science. Herein, we showed that corrosion of some simple manganese salts, MnCO3, MnWO4, Mn3(PO4)2 · 3H2O, and Mn(VO3)2 · xH2O, under the water-electrolysis conditions at pH = 6.3, gives an amorphous manganese oxide. This conversion was studied with X-ray absorption spectroscopy (XAS), as well as, scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDXS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), spectroelectrochemistry and electrochemistry methods. When using as a water-oxidizing catalyst, such results are important to display that long-term water oxidation can change the nature of the manganese salts.

A nickel(ii) complex under water-oxidation reaction: what is the true catalyst?

A Ni(ii) complex as a water-oxidizing catalyst under electrochemical conditions was studied and the role of Ni oxide as a true catalyst was investigated.

A manganese(ii) phthalocyanine under water-oxidation reaction: new findings

The decomposition reaction for a manganese complex under water oxidation was investigated.

Water oxidation by simple manganese salts in the presence of cerium(iv) ammonium nitrate: towards a complete picture

For the first time, using some methods, we showed that under the water-oxidation conditions and in the presence of cerium(iv) ammonium nitrate, some manganese salts are converted to Mn oxide.

Water oxidation catalyzed by two cobalt complexes: new challenges and questions

Herein, two cobalt complexes as true catalysts for water oxidation were investigated.

A mononuclear cobalt complex for water oxidation: new controversies and puzzles

Herein the role of a mononuclear cobalt(iii) complex, [Co^III(DPKOH)₂]ClO₄ (DPK = di(2-pyridyl)ketone), in the water electrooxidation process is reinvestigated.

Water oxidation by Ni(1,4,8,11-tetraazacyclotetradecane)2+ in the presence of carbonate: new findings and an alternative mechanism

The role of nanosized particles or Ni ions on the surface of the electrode under water-oxidation conditions in the presence of Ni(1,4,8,11-tetraazacyclotetradecane)²⁺ was investigated.

The effect of lanthanum(III) and cerium(III) ions between layers of manganese oxide on water oxidation

Manganese oxide structure with lanthanum(III) or cerium(III) ions between the layers was synthesized by a simple method. The ratio of Mn to Ce or La in samples was 0.00, 0.04, 0.08, 0.16, 0.32, 0.5, 0.82, or 1.62. The compounds were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction studies, and atomic absorption spectroscopy. The compounds show efficient catalytic activity of water oxidation in the presence of cerium(IV) ammonium nitrate with a turnover frequency of 1.6 mmol O2/mol Mn.s. In contrast to the water-oxidizing complex in Photosystem II, calcium(II) has no specific role to enhance the water-oxidizing activity of the layered manganese oxides and other cations can be replaced without any significant decrease in water-oxidizing activities of these layered Mn oxides. Based on this and previously reported results from oxygen evolution in the presence of H 2 (18) O, we discuss the mechanism and the important factors influencing the water-oxidizing activities of the manganese oxides.

Manganese oxides supported on gold nanoparticles: new findings and current controversies for the role of gold

We synthesized manganese oxides supported on gold nanoparticles (diameter <100 nm) by the reaction of KMnO4 with gold nanoparticles under hydrothermal conditions. In this green method Mn oxide is deposited on the gold nanoparticles. The compounds were characterized by scanning electron microscopy, energy-dispersive spectrometry, high-resolution transmission electron microscopy, X-ray diffraction, UV-Vis spectroscopy, Fourier transform infrared spectroscopy, and atomic absorption spectroscopy. In the next step, the water-oxidizing activities of these compounds in the presence of cerium(IV) ammonium nitrate as a non-oxo transfer oxidant were studied. The results show that these compounds are good catalysts toward water oxidation with a turnover frequency of 1.0 ± 0.1 (mmol O2/(mol Mn·s)). A comparison with other previously reported Mn oxides and important factors influencing the water-oxidizing activities of Mn oxides is also discussed.

A very simple and high-yield method to synthesize nanolayered Mn oxide

Nanolayered Mn oxides have been prepared by a very simple, low-cost and high-yield method using soap, KOH, MnCl2 and H2O2. Scanning electron microscopy, transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray diffraction spectrometry have been used to characterize the phase and the morphology of the nanolayered Mn oxide. The nanolayered Mn oxide shows good catalytic activity toward water oxidation in the presence of cerium(iv) ammonium nitrate.

Nano-sized Mn3O4 and β-MnOOH from the decomposition of β-cyclodextrin-Mn: 2. The water-oxidizing activities

Nano-sized Mn oxides contain Mn3O4, β-MnOOH and Mn2O3 have been prepared by a previously reported method using thermal decomposition of β-cyclodextrin-Mn complexes. In the next step, the water-oxidizing activities of these Mn oxides using cerium(IV) ammonium nitrate as a chemical oxidant are studied. The turnover frequencies for β-MnO(OH) and Mn3O4 are 0.24 and 0.01-0.17 (mmol O2/mol Mns), respectively. Subsequently, water-oxidizing activities of these compounds are compared to the other previously reported Mn oxides. Important factors affecting water oxidation by these Mn oxides are also discussed.

Nano-sized Mn oxides on halloysite or high surface area montmorillonite as efficient catalysts for water oxidation with cerium(iv) ammonium nitrate: support from natural sources

We used halloysite, a nano-sized natural mineral and high surface area montmorillonite as supports for nano-sized Mn oxides to synthesize efficient water-oxidising catalysts.

Surfactant-mediated electrodeposition of a water-oxidizing manganese oxide

Use of sodium dodecyl sulfate (SDS) during electrodeposition improves the mechanical stability and catalytic activity of manganese dioxide for electrocatalytic water oxidation.

Nano-sized Mn oxides as true catalysts for alcohol oxidation by a mononuclear manganese(ii) complex

We propose that nano-sized Mn oxides are true catalysts for the oxidation of some alcohols to aldehydes in the presence of a mononuclear manganese(ii) complex, and Oxone as an oxidant.

Self-healing for nanolayered manganese oxides in the presence of cerium(iv) ammonium nitrate: new findings

We used multivariate chemometrics methods to analyze the concentration profiles of cerium(iv) ammonium nitrate and MnO₄⁻during the water oxidation reaction.