A Novel Diarylethene-rhodamine Unit Based Chemosensor for Fluorimetric and Colorimetric Detection of Hg2

A novel fluorimetric and colorimetric chemosensor (1O) was synthesized with diarylethene-rhodamine unit and characterized by ESI-MS, ¹H NMR, and ¹³C NMR. The chemosensor can selectively recognize extremely low concentrations of Hg²⁺ over a variety of metal ions with remarkable colorimetric and fluorescent responses. The colorimetric and fluorescent changes were ascribed the reaction between 1O and Hg²⁺ destructed the rhodamine hydrazide into open-ring form which was proved by mass spectrometry and nuclear magnetic titration analyses. The detection limits of the UV absorption and fluorescence methods for Hg²⁺ were found to be 0.708 μM and 24.6 nM, respectively. Moreover, the chemosensor exhibited excellent photochromism and outstanding fatigue resistance property under alternating UV and visible light irradiation. The application potential of the chemosensor was demonstrated with the qualitative detection of Hg²⁺ in real water samples.

Fluorescent Terpolymers Using Two Non-Emissive Monomers for Cr(III) Sensors, Removal, and Bio-Imaging

The nonconventional purely aliphatic intrinsically fluorescent multifunctional terpolymers, such as 2-acrylamido-2-methylpropane sulfonic acid-co-2-(3-acrylamidopropylamido)-2-methylpropane sulfonic acid-co-acrylamide (AMPS-co-APMPS-co-AM, 1), acrylic acid-co-3-acrylamidopropanoic acid-co-acrylamide (AA-co-APA-co-AM, 2), and methacrylic acid-co-3-acrylamido-2-methyl propanoic acid-co-acrylamide (MAA-co-AMPA-co-AM, 3), were synthesized via N-H functionalized multi-C-C/N-C coupled in situ attachments of fluorophore monomers, that is, APMPS, APA, and AMPA, in solution polymerization of two non-fluorescent monomers. These terpolymers were suitable for selective Cr(III) sensors, high-performance exclusions of Cr(III), and fluorescence imaging of human osteosarcoma cancer cells. The structures of 1, 2, and 3, in situ attachments of fluorescent amino acid monomers, locations of fluorophores, aggregation-induced enhanced emissions, and the superadsorption mechanism were understood via microstructural analyses. The geometries, electronic structures, and the low-lying singlet-singlet absorption and emission of 1, 2, and 3 were explored using density functional theory (DFT), time-dependent DFT, and natural transition orbital analyses. The ionic and variable interactions of 1, 2, and 3 with Cr(III) were envisaged via analyses of adsorbed microstructures, fitting of kinetics data to a pseudo-second-order model, and the measurements of activation energies. For 1/2/3, limit of detection values and adsorption capacities were 1.88 × 10-7/3.75 × 10-7/1.25 × 10-7 M and 1316.35/1431.40/1372.18 mg g-1, respectively, at pHi = 7.0, 303 K, and 1000 ppm. The better overall properties made 3 to be more suitable in sensing and cell imaging.

A lysosome-targetable fluorescent probe for imaging trivalent cations Fe3+, Al3+ and Cr3+ in living cells

An effective morpholine-type naphthalimide chemsensor, N-p-chlorophenyl-4-(2-aminoethyl)morpholine-1,8-naphthalimide (CMN) has been developed as a lysosome-targeted fluorometric sensor for trivalent metal ions (Fe³⁺, Al³⁺ and Cr³⁺). Upon the addition of Fe³⁺, Al³⁺ or Cr³⁺ ions, the probe CMN showed an evident naked-eye color changes which pale yellow solution of CMN turned deepened and it displayed turn-on fluorescence response in methanol. CMN showed a significant selective and sensitive toward Fe³⁺, Al³⁺ or Cr³⁺ ions, while there was no obvious behavior to other monovalent or divalent metal ions from the UV-vis and fluorescence spectrum. Based on the Job's plot analyses the 1:1 coordination mode of CMN with Fe³⁺, Al³⁺ or Cr³⁺ was proposed. The limit of detection (LOD) observed were 0.65, 0.69 and 0.68 μM for Fe³⁺, Al³⁺ and Cr³⁺ ions, respectively. The N-atom of morpholine directly involved in complex formation, CMN emitted fluorescence through inhibition of photoinduced electron transfer (PET). This probe exhibited excellent imaging ability for Fe³⁺, Al³⁺and Cr³⁺ ions in living cells with low cytotoxicity. Significantly, the cellular confocal microscopic research indicated that the lysosome-targeted group of morpholine moiety was introduced which realized the capability of imaging lysosomal trivalent metal ions in living cells for the first time.

Chelation of specific metal ions imparts coplanarity and fluorescence in two imidazo[1,2-a]pyridine derivatives: Potential chemosensors for detection of metal ions in aqueous and biosamples

Synthesis and chelation induced fluorescence emission from two imidazo[1,2-a]pyridine derivatives are described. The nonfluorescent molecule 1 containing N and O donor atoms, achieves coplanarity upon interactions with trivalent cations Al³⁺, Fe³⁺ and Cr³⁺, that favors fluorescence emission. Molecule 2 containing two N donor atoms attains coplanarity upon interaction with the only Zn²⁺ and becomes fluorescent. Both molecules 1 and 2 form a 1:1 complex with interacting metal ions. Other trivalent metal ions (including Bi³⁺ and In³⁺) and common divalent metal ions (including Hg²⁺ and Cd²⁺) fail to form any complex with 1 or 2, and they do not interfere in the detection of Zn²⁺, Al³⁺, Fe³⁺ or Cr³⁺ ions. Noninterference of other metal ions renders 1 and 2 suitable for the detection of fungal cells contaminated with Zn²⁺, Al³⁺, Fe³⁺ or Cr³⁺ ions.

Dual-binding pyridine and rhodamine B conjugate derivatives as fluorescent chemosensors for ferric ions in aqueous media and living cells

Two new pyridine-type rhodamine B chemosensors (RBPO and RBPF) used to detect Fe3+ have been designed and synthesized, and the sensing behavior towards various metal ions was evaluated via UV-vis and fluorescence spectroscopic techniques. Both RBPO and RBPF not only have good spectral responses to Fe3+ in an EtOH/H2O solution (3 : 1, v/v, HEPES, 0.5 mM, pH = 7.33) with low detection limits and high binding constants, but also suffer from less interference from common metal cations. The two chemosensors are further proven to be practical in sensitively monitoring trace Fe3+ in real water specimens. Intracellular imaging applications demonstrated that RBPO and RBPF can be used as two fluorescent chemosensors for the detection of Fe3+ in living human breast adenocarcinoma (MCF-7) cells.

Photoinduced Electron Transfer Switching Mechanism of a Naphthalimide Derivative with its Solvatochromic Behaviour: An Experimental and Theoretical Study with In Cell Investigations

The sole existence of a t-bone-shaped naphthalimide derivative [2-(2-aminoethyl)-1H-benzo[de]isoquinoline-1,3(2H)dione] (NAP), which gives rise to a photoinduced electron transfer (PET) mechanism, has been established using a combination of experimental and theoretical studies. In parallel an in vitro-in cell PET mechanism has also been shown. To understand the photophysics of NAP, solvent studies have been carried out in different solvents. In addition, theoretical calculations have been conducted to explain the spectroscopic properties through optimized structures. A "turn off" PET mechanism has also been observed in the presence of specific metal ions, namely, Cr³⁺ , Fe³⁺ and Hg²⁺ among a series of metal ions. Theoretical studies reveal that NAP-Cr³⁺ , NAP-Fe³⁺ and NAP-Hg²⁺ have their HOMO energy states lying in between a HOMO-LUMO energy state of the t-bone-type NAP molecule. On the contrary, the HOMO state of the other metal ion-NAP conjugate (NAP-Mⁿ⁺ ) does not lie in between the HOMO-LUMO energy gap of the t-bone-type NAP molecule. Coupled with in vitro studies, in cell investigations reveal an enhancement of fluorescence intensity of NAP upon cytosolic metal sensing. Furthermore, a very high cell viability of NAP treated cells as tested by MTT assay and a fast permeation of the said compound as revealed by flow cytometry suggest NAP to be a potential candidate in metal sensing and bioimaging applications.

Selective interactions of trivalent cations Fe³⁺, Al³⁺ and Cr³⁺ turn on fluorescence in a naphthalimide based single molecular probe

Synthesis and fluorescence turn-on behavior of a naphthalimide based probe is described. Selective interactions of trivalent cations Fe(3+), Al(3+) or Cr(3+) with probe 1 inhibit the PET operating in the probe, and thereby, permit the detection of these trivalent cations present in aqueous samples and live cells. Failure of other trivalent cations (Eu(3+), Gd(3+) and Nb(3+)) to inhibit the PET process in 1 demonstrates the role of chelating ring size vis-à-vis ionic radius in the selective recognition of specific metal ions.

5-Hydroxymethylfurfural modified rhodamine B dual-function derivative: Highly sensitive and selective optical detection of pH and Cu(2+)

A dual-function optical chemosensor (RBF) was designed and easily synthesized by condensation reaction of 5-Hydroxymethylfurfural and rhodamine B hydrazide. RBF exhibited highly sensitive, highly selective and quick response to acidic pH. The fluorescence intensity of RBF exhibited a more than 41-fold increase within the pH range from 7.50 to 3.73 with a pKa value of 5.02, which could be successfully applied to monitor intracellular pH in living PC12 cells and HeLa cells. Additionally, the spectroscopy of UV-Vis and EDTA-adding experiments indicated that RBF was a highly selective and reversible colorimetric chemosensor for Cu(2+) in Tris-HCl (10mM, pH=7.2) aqueous buffer solution as well as other metal ions had no obvious interference. Moreover, RBF has been successfully applied to detect Cu(2+) in real water samples.

Fluorescent organic nanoparticles (FONs) for selective recognition of Al3+: application to bio-imaging for bacterial sample

(a) Changes in fluorescence upon successive addition of Al³⁺ ions to salpn-ONPs; (b) titration profile of fluorescence; (c) recognition of Al³⁺ through bio-fluorescence Staphylococcus aureus bacterial cells.

Fluorescence imaging for Fe3+ in Arabidopsis by using simple naphthalene-based ligands

Naphthalene-based probes 1 and 1A were found to dramatically decrease fluorescence upon addition of Fe³⁺, but not with other metal ions. Furthermore, 1 and 1A displayed high fluorescence quenched-imaging for Fe³⁺ in Arabidopsis as well as nanofibruous films.

Novel functionalized pillar[5]arene: synthesis, assembly and application in sequential fluorescent sensing for Fe3+ and F− in aqueous media

The synthesis, assembly and applications of novel functionalized pillar[5]arene in the sequential fluorescent sensing of Fe³⁺ and F⁻ in aqueous media is reported.

Different interactions between a metal electrode and an organic layer and their different electrical bistability performances

Different electrical bistability performances were obtained by tuning metal electrodes.

Binding site-driven sensing properties of a quinazoline derivative with metal cations

A quinazoline derivative showed high sensitivity and selectivity for Al³⁺, Cr³⁺ and Fe³⁺ ions in methanol solution.

A naphthalimide based PET probe with Fe3+ selective detection ability: theoretical and experimental study

A naphthalimide based Fe³⁺ selective fluorescence ‘turn-on’ probe that operates based on a PET mechanism has been synthesized, and its application in the detection of Fe³⁺ ions in aqueous samples and in live cells is explored.