Effect of the use of bromelain associated with bioactive glass-ceramic on dentin/adhesive interface

OBJECTIVES

To evaluate the effect of bromelain associated with Biosilicate on the bond strength (BS) of a universal adhesive system to sound (SD) and caries-affected dentin (CAD), and on the proteolytic activity.

MATERIALS AND METHODS

Cavities were prepared in 360 molars, half submitted to cariogenic challenge. Teeth were separated into groups (n=20): Control-No treatment; CHX-0.12% chlorhexidine; NaOCl-5% sodium hypochlorite; Br5%-5% bromelain; Br10%-10% bromelain; Bio-10% Biosilicate; NaOClBio-NaOCl+Bio; Br5%Bio-Br5%+Bio; Br10%Bio-Br10%+Bio. Following treatments, the adhesive system was applied, and cavities were restored. Samples were sectioned into sticks and stored at 37 °C for 24 h, 6 months, and 1 year. Microtensile BS (2-way ANOVA, Bonferroni's test, α=0.05), fracture patterns (SEM), and adhesive interfaces (TEM) were evaluated. Bacterial collagenase assay and in situ zymography were performed.

RESULTS

In CAD, Br10% presented higher BS (p=0.0208) than Br5%Bio. Br5% presented higher BS (p=0.0033) after 6 months than after 24 h; and association of treatments, higher BS (p<0.05) after aging than after 24 h. Mixed fractures were the most prevalent. Association of treatments promoted a more uniform hybrid layer with embedded Bio particles. Experimental groups presented lower (p<0.0001) relative fluorescence units than Control. Bromelain, associated or not with Bio, showed collagenolytic degradation.

CONCLUSIONS

Bromelain associated with Biosilicate did not affect the BS to SD. In CAD, Br5%Bio decreased immediate BS but had no long-term influence. This association decreased the proteolytic activity.

CLINICAL RELEVANCE

Bromelain and Biosilicate may enhance the longevity of adhesive restorations by inhibiting endogenous proteases.

Effect of natural primer associated to bioactive glass-ceramic on adhesive/dentin interface

OBJECTIVES

This study evaluated the effect of propolis associated with Biosilicate on the bond strength (BS) and gelatinolytic activity at the adhesive/dentin interface.

METHODS

Occlusal cavities were prepared in 320 human molars. Half of them were submitted to cariogenic challenge. All the teeth were separated into eight groups (n = 20): Control - Adhesive System (Single Bond Universal, 3 MESPE); CHX - 0.12 % Chlorhexidine; Bio - 10 % Biosilicate; P16 - Propolis with low levels of polyphenols; P45 - Propolis with high levels of polyphenols; CHX Bio - CHX + Bio; P16 Bio - P16+Bio; P45 Bio - P45+Bio. The adhesive was applied (self-etch mode) after treatments. Restorations (Filtek Z350, 3 MESPE) were performed and samples sectioned into sticks, separated and stored in distilled water at 37 °C for 24 h, 6 months and 1 year. Microtensile BS (0.5 mm/min) was tested and analyzed (2-way ANOVA, Bonferroni's Test, p < .05 and Weibull analysis). Fracture patterns (VH-M100, Keyence) and adhesive interfaces (SEM, EVO-MA10, ZEISS and TEM, JEM-1010, JEOL) were observed; and biodegradation and in situ zymography performed.

RESULTS

P16 presented the highest BS values on sound dentin after 6 months. In caries-affected dentin (CAD), the association of treatments promoted the highest BS after 24 h. Sound dentin obtained significantly higher Weibull modulus than CAD. SEM displayed resin tags in P16, P45 and association of treatments. TEM showed good interaction between adhesive and dentin. According to the in situ zymography and biodegradation assay all natural primers reduced the gelatinolytic activity. P45 presented the lowest biodegradation and enzymatic activity.

CONCLUSIONS

Propolis and the association of treatments promoted the highest bond strength results and preserved the dentin. All the experimental groups exhibited low gelatinolytic activity.

CLINICAL SIGNIFICANCE

Propolis and the association of treatments with Biosilicate could preserve the dentin substrate and improve the longevity of composite restorations.

A Review of Bioactive Glass/Natural Polymer Composites: State of the Art

Collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose are biocompatible and non-cytotoxic, being attractive natural polymers for medical devices for both soft and hard tissues. However, such natural polymers have low bioactivity and poor mechanical properties, which limit their applications. To tackle these drawbacks, collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose can be combined with bioactive glass (BG) nanoparticles and microparticles to produce composites. The incorporation of BGs improves the mechanical properties of the final system as well as its bioactivity and regenerative potential. Indeed, several studies have demonstrated that polymer/BG composites may improve angiogenesis, neo-vascularization, cells adhesion, and proliferation. This review presents the state of the art and future perspectives of collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose matrices combined with BG particles to develop composites such as scaffolds, injectable fillers, membranes, hydrogels, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a wide spectrum of applications.

Evaluation of hMSCs Response to Sodium Alginate / Bioactive Glass Composite Paste: Effect of CaO/P2O5, Sodium Alginate Concentration and P/L Ratios

Background:

Bioactive glasses with different compositions have been extensively used as bone tissue engineering. Preparation, development and characterization of alginate pastes containing bioglass for bone repair applications were the purposes of this study.

Objective:

The injectable bone pastes were produced from sol-gel derived bioactive glass nanoparticles with various CaO/P2O5 ratios of 19, 9.5 and 4.75 and sodium alginate solutions with different concentrations of 1, 2 and 4 wt.%. The effect of CaO/P2O5 and powder to liquid (P/L) ratios and alginate concentration on injectability, biodegradation, rheological properties, bioactivity and cellular behavior of the pastes have been studied. The behavior of human mesenchymal stem cells (hMSCs) in the presence of the pastes was assessed by MTT assay, biomineralization assay, ALP activity, Acridine orange staining and Alizarin red staining tests.

Results:

By adding sodium alginate, the pastes exhibited a thixotropy behavior. The storage modulus of all pastes was larger than the loss modulus in the frequency range of 0.1-100 s-1. Cytotoxicity evaluation results revealed that there was a critical amount of bioactive glass in pastes which are above the limit; the viability of hMSCs will be at risk. The pastes made of bioactive glass nanoparticles with CaO/P2O5 = 9.5 and sodium alginate 1% with P/L ratio of 0.8 showed optimum behavior in terms of mineral carrying capacity, injectability characteristics, accellular bioactivity in SBF, loss weight and wash out behavior, proliferation and differentiation of hMSCs.

Conclusion:

According to the results, the pastes prepared with sodium alginate solution and bioactive glass nanoparticles can be beneficial in bone tissue engineering.

Characterization and Cytotoxicity Evaluation of a Marine Sponge Biosilica

Bone fractures characterize an important event in the medical healthcare, being related to traumas, aging, and diseases. In critical conditions, such as extensive bone loss and osteoporosis, the tissue restoration may be compromised and culminate in a non-union consolidation. In this context, the osteogenic properties of biomaterials with a natural origin have gained prominence. Particularly, marine sponges are promising organisms that can be exploited as biomaterials for bone grafts. Thus, the objectives of this study were to study the physicochemical and morphological properties of biosilica (BS) from sponges by using scanning electron microscopy, Fourier-transform infrared, X-ray diffraction (SEM, FTIR and XRD respectively), mineralization, and pH. In addition, tests on an osteoblast precursor cell line (MC3T3-E1) were performed to investigate its cytotoxicity and proliferation in presence of BS. Bioglass (BG) was used as gold standard material for comparison purposes. Sponge BS was obtained, and this fact was proven by SEM, FTIR, and XRD analysis. Calcium assay showed a progressive release of this ion from day 7 and a more balanced pH for BS was maintained compared to BG. Cytotoxicity assay indicated that BS had a positive influence on MC3T3-E1 cells viability and qRT-PCR showed that this material stimulated Runx2 and BMP4 gene expressions. Taken together, the results indicate a potential use of sponge biosilica for tissue engineering applications.

Vacuumed collagen-impregnated bioglass scaffolds: Characterization and influence on proliferation and differentiation of bone marrow stromal cells

This study evaluated physical-chemical characteristics of a vacuumed collagen-impregnated bioglass (BG) scaffolds and bone marrow stromal cells (BMSCs) behavior on those composites. scanning electron microscope and energy dispersive x-ray spectroscope demonstrated collagen (Col) was successfully introduced into BG. Vacuum impregnation system has showed efficiency for Col impregnation in BG scaffolds (approximately 20 wt %). Furthermore, mass weight decreasing and more stabilized pH were observed over time for BG/Col upon incubation in phosphate buffered saline compared to plain BG under same conditions. Calcium evaluation (Ca assay) demonstrated higher calcium uptake for BG/Col samples compared to BG. In addition, BG samples presented hydroxyapatite crystals formation on its surface after 14 days in simulated body fluid solution, and signs of initial degradation were observed for BG and BG/Col after 21 days. Fourier transform infrared spectroscopy spectra for both groups indicated peaks for hydroxyapatite formation. Finally, a significant increase of BMSCs viability for both composites was observed compared to control group, but no increase of osteogenic differentiation-related gene expressions were found. In summary, BG/Col scaffolds have improved degradation, pH equilibrium and Ca mineralization over time, accompanied by hydroxyapatite formation. Moreover, both BG and BG/Col scaffolds were biocompatible and noncytotoxic, promoting a higher cell viability compared to control. Future investigations should focus on additional molecular and in vivo studies in order to evaluate biomaterial performance for bone tissue engineering applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 211-222, 2019.

Injectable and self-healing dynamic hydrogel containing bioactive glass nanoparticles as a potential biomaterial for bone regeneration

Combination of Au-based dynamic hydrogel with 100 nm bioactive glass nanoparticles resulted in the formation of an injectable, self-healing and biocompatible hydrogel nanocomposites with osteoinductive properties and potential for bone regeneration.

The effect of submicron bioactive glass particles on in vitro osteogenesis

Mono-dispersed submicron bioactive glass could enhance the adhesion and osteogenesis of MG-63 cells.