Electrochromic Devices Based on 2D MoO3-x/PEDOT:PSS Composite Film with Boosted Ion Transport

Electrochromic materials allow for optical modulation and have attracted much attention due to their bright future in applications such as smart windows and energy-saving displays. Two-dimensional (2D) molybdenum oxide nanoflakes with combined advantages of high active specific surface area and natural layered structure should be highly potential candidates for electrochromic devices. However, the efficient top-down preparation of 2D MoO3 nanoflakes is still a huge challenge and the sluggish ionic kinetics hinder its electrochromic performance. Herein, we demonstrated a feasible thiourea-assisted exfoliation procedure, which can not only increase the yield but also reduce the thickness of 2D MoO3-x nanoflakes down to a few nanometers. Furthermore, electrophoretic-deposited MoO3-x nanoflakes were combined with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-conjugated polymer to simultaneously enhance the ionic kinetics and electronic conductivity, with a diffusion coefficient of 3.09 × 10-10 cm2 s-1 and a charge transport resistance of 33.7 Ω. The prepared 2D MoO3-x/PEDOT:PSS composite films exhibit improved electrochromic performance, including fast switching speed (7 s for bleaching, 5 s for coloring), enhanced coloration efficiency (87.1 cm2 C-1), and large transmittance modulation (ΔT = 65%). This study shows outstanding potential for 2D MoO3-x nanoflakes in electrochromic applications and opens new avenues for optimizing the ion transport in inorganic-organic composites, which will be possibly inspired for other electrochemical devices.

Internal Resistor Effect of Multilayer-Structured Synaptic Device for Low-Power Operation

A synaptic device with a multilayer structure is proposed to reduce the operating power of neuromorphic computing systems while maintaining a high-density integration. A simple metal-insulator-metal (MIM)-structured multilayer synaptic device is developed using an 8-inch wafer-based and complementary metal-oxide-semiconductor (CMOS) fabrication process. The three types of MIM-structured synaptic devices are compared to assess their effects on reducing the operating power. The obtained results exhibited low-power operation owing to the inserted layers acting as an internal resistor. The modulated operational conductance level and simple MIM structure demonstrate the feasibility of implementing both low-power operation and high-density integration in multilayer synaptic devices.

Temperature-Dependent Electrochromic Devices for Energy-Saving Dual-Mode Displays

Electrochromic (EC) devices show promising prospects with the increasing demand for energy-efficient and sustainable technologies. Multifunctionality integration is an inevitable characteristic for EC devices to adapt to changing environments. Herein, a dual-mode temperature-dependent EC device is demonstrated for the first time. Combined with the transparent PVA/EG-ZnCl₂ organohydrogel electrolyte, the devices exhibit good EC performances over a wide temperature range (-40 to 40 °C). The evolutions of ion/electron transport kinetics-related indicators with temperature are further explored and simulated to reveal the mechanism of the temperature dependence of EC devices. Significantly, the optimized tungsten oxide-based EC device shows high performances at the extremely low temperature of -40 °C with a large transmittance modulation (80.8% @660 nm) and outstanding optical memory effects (97.3% retention of the initial transmittance modulation after 32 h) without electrical energy consumption. Furthermore, with a perovskite quantum dot photoluminescence film serving as the backlight, the device can switch display modes between emissive and reflective to realize its functionality in bright or dark conditions. This work provides a broad application prospect for EC devices in diverse environments of light (bright/dark) and temperature (hot/cold).

Properties, optimized morphologies, and advanced strategies for photocatalytic applications of WO3 based photocatalysts

The development of WO₃ based photocatalysts has gained considerable attention across the world, especially in the realm of environmental remediation and energy production. WO₃ has a band gap of 2.5- 2.7 eV that falls under the visible region and is thus a potential candidate to utilize in various photocatalytic processes. As an earth-abundant metal oxide, WO₃ discovered in 1976 displayed excellent electronic and morphological properties, good stability, and enhanced photoactivity with diverse crystal phases. Also, it unveils non-toxicity, high stability in drastic conditions, biocompatibility, low cost, excellent hole mobility (10 cm² V^-1s^-1), and tunable band gap. This review provides a comprehensive overview of the different properties of WO₃ inclusive of crystallographic, electrical, optical, thermoelectrical, and ferroelectric properties. The different morphologies of WO₃ based on dimensions were obtained by adopting different fabrication methods including inspecting their effects on the efficiency of WO₃. Numerous strategies to construct an ideal photocatalyst such as engineering crystal facets, surface defects, doping, heterojunction formation explaining specifically type-II, Z-scheme, and S-scheme mechanisms with addition to carbonaceous based WO₃ nanocomposites are summed up to explore the photocatalytic performance. The typical application of WO₃ is deliberated in detail involving the role and efficiency of WO₃ in pollutant degradation, CO₂ photoreduction, and water splitting. Besides, other applications of WO₃ as gas-sensor, bio-sensor, decomposition of VOCs, heavy metals ions adsorption, and antimicrobial property are also included. Moreover, the numerous aspects responsible for the high efficiency of WO₃-based nanocomposites with their challenges, opportunities, and future aspects are summarized. Hopefully, this review may inspire researchers to explore new ideas to boost the production of clean energy for the next generation.

Sub-micro droplet reactors for green synthesis of Li3VO4 anode materials in lithium ion batteries

The conventional solid-state reaction suffers from low diffusivity, high energy consumption, and uncontrolled morphology. These limitations are competed by the presence of water in solution route reaction. Herein, based on concept of combining above methods, we report a facile solid-state reaction conducted in water vapor at low temperature along with calcium doping for modifying lithium vanadate as anode material for lithium-ion batteries. The optimized material, delivers a superior specific capacity of 543.1, 477.1, and 337.2 mAh g-1 after 200 and 1000 cycles at current densities of 100, 1000 and 4000 mA g-1, respectively, which is attributed to the contribution of pseudocapacitance. In this work, we also use experimental and theoretical calculation to demonstrate that the enhancement of doped lithium vanadate is attributed to particles confinement of droplets in water vapor along with the surface and structure variation of calcium doping effect.

Oxygen incorporated WS2 nanoclusters with superior electrocatalytic properties for hydrogen evolution reaction

Transition metal dichalcogenides (TMDs) exhibit unique properties and show potential for promising applications in energy conversion. Mono/few-layered TMDs have been widely explored as active electrocatalysts for the hydrogen evolution reaction (HER). A controlled synthesis of TMD nanostructures with unique structural and electronic properties, leading to highly active sites or higher conductivity, is essential to achieve enhanced HER activity. Here, we demonstrate a new approach to controllably synthesize highly catalytically active oxygen-incorporated 1T and 2H WS2 nanoclusters from oxygen deficient WO3 nanorods, following chemical exfoliation and ultrasonication processes, respectively. The as-synthesized 1T nanoclusters, with unique properties of tailored edge sites, and enhanced conductivity resulting from the metallic 1T phase and oxygen incorporation, have been identified as highly active and promising electrocatalysts for the HER, with a very low Tafel slope of 47 mV per decade and a low onset overpotential of 88 mV, along with exceptionally high exchange current density and very good stability. The study could be extended to other TMD materials for potential applications in energy conversion and storage.

Rapid Formation of a Disordered Layer on Monoclinic BiVO4 : Co-Catalyst-Free Photoelectrochemical Solar Water Splitting

A surface disordered layer is a plausible approach to improve the photoelectrochemical performance of TiO₂ . However, the formation of a crystalline disordered layer in BiVO₄ and its effectiveness towards photoelectrochemical water splitting has remained a big challenge. Here, we report a rapid solution process (within 5 s) that is able to form a disordered layer of a few nanometers thick on the surface of BiVO₄ nanoparticles using a specific solution with a controllable reducing power. The disordered layer on BiVO₄ alleviates charge recombination at the electrode-electrolyte interface and reduces the onset potential greatly, which in turn results in a photocurrent density of approximately 2.3 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode (RHE). This value is 2.1 times higher than that of bare BiVO₄ . The enhanced photoactivity is attributed to the increased charge separation and transfer efficiencies, which resolve the intrinsic drawbacks of bare BiVO₄ such as the short hole diffusion length of around 100 nm and poor surface oxygen evolution reactivity.

Quasi physisorptive two dimensional tungsten oxide nanosheets with extraordinary sensitivity and selectivity to NO2

Attributing to their distinct thickness and surface dependent physicochemical properties, two dimensional (2D) nanostructures have become an area of increasing interest for interfacial interactions. Effectively, properties such as high surface-to-volume ratio, modulated surface activities and increased control of oxygen vacancies make these types of materials particularly suitable for gas-sensing applications. This work reports a facile wet-chemical synthesis of 2D tungsten oxide nanosheets by sonication of tungsten particles in an acidic environment and thermal annealing thereafter. The resultant product of large nanosheets with intrinsic substoichiometric properties is shown to be highly sensitive and selective to nitrogen dioxide (NO₂) gas, which is a major pollutant. The strong synergy between polar NO₂ molecules and tungsten oxide surface and also abundance of active surface sites on the nanosheets for molecule interactions contribute to the exceptionally sensitive and selective response. An extraordinary response factor of ∼30 is demonstrated to ultralow 40 parts per billion (ppb) NO₂ at a relatively low operating temperature of 150 °C, within the physisorption temperature band for tungsten oxide. Selectivity to NO₂ is demonstrated and the theory behind it is discussed. The structural, morphological and compositional characteristics of the synthesised and annealed materials are extensively characterised and electronic band structures are proposed. The demonstrated 2D tungsten oxide based sensing device holds the greatest promise for producing future commercial low-cost, sensitive and selective NO₂ gas sensors.

Efficiently synthesized Co doped Cu3TeO6 accounted for its anomalous behaviour in electronic properties

Efficient synthesis of Cu_3−xCo_xTeO₆ (x = 0.0, 0.1, 0.3 or 0.5) yields cubic morphologies, which exhibit remarkable electronic and enhanced permittivity properties.