Porous hydrogel micropressure sensors enabled by nanocellulose microgel stabilized high internal phase pickering emulsion templates

Lightweight soft hydrogels are ideal materials for next-generation sustainable wearable flexible electronics. However, achieving an optimal combination of high flexibility, high sensitivity, and micropressure sensing presents significant challenges. Introducing porous structures has emerged as a promising approach to enhance the micropressure responsiveness of hydrogels. This study proposes a highly stable high internal phase Pickering emulsion (HIPE) template stabilized by nanocellulose microgels to fabricate ultrasoft porous hydrogels with high porosity. By regulating the stability and microstructure of the HIPE, the porous hydrogels achieved synergistic improvements in high deformability, subtle pressure detection, and enhanced sensitivity. The porous hydrogels prepared by combining HIPE with an acrylic acid/acrylamide system exhibited low Young's modulus (11 kPa), high porosity (75.9 %), extensive tensile strain range (0-1368 %), enhanced sensitivity coefficient (133.18 kPa-1) under subtle pressures (0-230 Pa), and excellent skin-adhesion capabilities. The integrated porous hydrogel sensors enabled precise detection of micropressure signals (e.g., pulses and wrist movements) under various motion states. This study provides a novel strategy for improving micropressure detection and sensitivity in hydrogel-based flexible micropressure sensors, highlighting their immense potential for diverse applications in flexible electronics.

Synthesis and Optimization of the Docetaxel-Loaded and Durvalumab-Targeted Human Serum Albumin Nanoparticles, In Vitro Characterization on Triple-Negative Breast Cancer Cells

Triple-negative breast cancer (TNBC) tends to behave more aggressively compared to other breast cancer subtypes due to the lack of receptors and its limited targeting therapy. In recent years, nanotechnology advancement has led to the development of various nanoparticle platforms for the targeted treatment of cancers. Especially, HSA-NPs have specific advantages such as biocompatibility, adjustable size during production, and relatively easy synthesis. In this study, HSA-NPs were encapsulated with docetaxel (DTX) and functionalized with polyethylene glycol (PEG), also becoming a targeting nanoplatform modified with durvalumab (DVL), and the whole nanostructure was well characterized. Subsequently, drug release studies and various in vitro cell culture studies such as determining the cytotoxicity and apoptotic levels of the nanoplatforms and PD-L1 using ELISA test were conducted on MDA-MB-468, MDA-MB-231, and MCF-7 cells. According to the results, HSA-DTX@PEG-DVL NPs showed better cytotoxicity compared to DTX in all the three cell lines. In addition, it was observed that the HSA-DTX@PEG-DVL NPs did not lead the cells to late apoptosis but were effective in the early apoptotic stage. Moreover, the ELISA data showed a significantly induced PD-L1 expression due to the presence of DVL in the nanostructure, which indicates that DVL antibodies successfully bind to the HSA-DTX@PEG-DVL nanostructure.

A Point-of-Care Immunosensor Based on a Quartz Crystal Microbalance with Graphene Biointerface for Antibody Assay

We present a sensitive and low-cost immunoassay, based on a customized open-source quartz crystal microbalance coupled with graphene biointerface sensors (G-QCM), to quantify antibodies in undiluted patient serum. We demonstrate its efficacy for a specific antibody against the phospholipase A2 receptor (anti-PLA2R), which is a biomarker in primary membranous nephropathy. A novel graphene-protein biointerface was constructed by adsorbing a low concentration of denatured bovine serum albumin (dBSA) on the reduced graphene oxide (rGO) sensor surface. The dBSA film prevents the denaturation of the protein receptor on the rGO surface and serves as the cross-linker for immobilization of the receptor for anti-PLA2R antibodies on the surface. The detection limit and selectivity of this G-QCM biosensor was compared with a commercial QCM system. The G-QCM immunoassay exhibited good specificity and high sensitivity toward the target, with an order of magnitude better detection limit (of 100 ng/mL) compared to the commercial system, at a fraction of the cost and with considerable time saving. The results obtained from patient sera compared favorably with those from enzyme-linked immunosorbent assay, validating the feasibility of use in clinical applications. The multifunctional dBSA-rGO platform provides a promising biofunctionalization method for universal immunoassay and biosensors. With the advantages of inexpensive, rapid, and sensitive detection, the G-QCM sensor and instrument form an effective autoimmune disease screening tool.

Improved de-inking of inkjet-printed paper using environmentally friendly atmospheric pressure low temperature plasma for paper recycling

Nowadays, due to environmental pollution and natural energy consumption caused by waste paper, many researches are being conducted on the reuse of printed-paper. To recycle the paper, de-inking has to be performed. In this article, in order to reduce the use of the commonly used de-inking chemicals, the effect of an atmospheric pressure helium plasma treatment on the de-inking enhancement of printed-paper is studied. Through colorimeter and UV-visible spectrometer measurements the plasma treatment is shown to speed up the de-inking. While SEM observations and FTIR measurements suggest that the paper quality is retained upon plasma treatment, the increase of surface hydrophilicity measured by water contact angle measurements, compared to non-treated paper, is believed to enhance the fiber swelling of the paper and lead to a faster ink removal.

Novel Bacterial Cellulose-Poly (Acrylic Acid) Hybrid Hydrogels with Controllable Antimicrobial Ability as Dressings for Chronic Wounds

This investigation examines the combination of poly (acrylic acid) (PAA) and bacterial cellulose (BC) nanofibers to synthesize hydrogel hybrid composites used for wound dressing application. Amoxicillin (AM) was also grafted onto the composites for drug release. Fourier transform infrared analysis and scanning electron microscopy conducted revealed the structure and porosity of the composite being developed, as well as the successful fabrication of BC-PAA composites. The results of mechanical testing and hygroscopicity revealed that the composite shows higher stability than hydrogels which are currently used worldwide, albeit with a slight reduction in swelling capabilities. However, the composite was revealed to be responsive to a rise in pH values with an increase in composite swelling and drug release. These results together with their morphological characteristics suggest that BC-PAA hydrogel hybrid composite is a promising candidate for wound dressing application.

Atmospheric Plasma Deposition of Methacrylate Layers Containing Catechol/Quinone Groups: An Alternative to Polydopamine Bioconjugation for Biomedical Applications

Bioconjugation of enzymes on coatings based on polydopamine (PDA) layers is an appealing approach to control biological responses on biomedical implant surfaces. As alternative to PDA wet deposition, a fast, solvent-free, and dynamic deposition approach based on atmospheric-pressure plasma dielectric barrier discharge process is considered to deposit on metallic surfaces acrylic-based interlayers containing highly chemically reactive catechol/quinone groups. A biomimetic approach based on covalent immobilization of Dispersin B, an enzyme with antibiofilm properties, shows the bioconjugation potential of the novel plasma polymer layers. The excellent antibiofilm activity against Staphylococcus epidermidis is comparable to the PDA-based layers prepared by wet chemical methods with slow deposition rates. A study of preosteoblastic MG-63 human cell line viability and adhesion properties on plasma polymer layers demonstrates early interaction required for biomedical applications.

Flexible Amoxicillin-Grafted Bacterial Cellulose Sponges for Wound Dressing: In Vitro and in Vivo Evaluation

In this study, we report the design and fabrication of a novel biocompatible sponge with excellent antibacterial property, making it a promising material for wound dressings. The sponge is formed by grafting amoxicillin onto regenerated bacterial cellulose (RBC). It was observed that the grafted RBC could enhance the antibacterial activity against fungus, Gram-negative, and Gram-positive bacteria. The morphology of strains treated with the grafted RBC and fluorescent stain results further demonstrated the antibacterial ability of the fabricated sponge. Moreover, a cytocompatibility test evaluated in vitro and in vivo illustrates the nontoxicity of the prepared sponge. More importantly, the wound infection model reveals that this sponge can accelerate the wound healing in vivo. This work indicates the novel sponge has the huge potential in wound dressing application for clinical use.

Anti-biofouling and antibacterial surfaces via a multicomponent coating deposited from an up-scalable atmospheric-pressure plasma-assisted CVD process

Prevention of bacterial adhesion and biofilm formation on the surfaces of materials is a topic of major medical and societal importance. In this study, an up-scalable atmospheric-pressure plasma assisted deposition method is introduced to produce a multicomponent coating towards the elaboration of antibacterial and anti-biofilm surfaces. Interestingly, from a single catechol-based monomer, high deposition rates of highly chemically reactive functional thin films bearing catechol as well as quinone groups are achieved. The catechol-bearing thin film allows the in situ silver nanoparticle formation, assessed by scanning electron microscopy and EDX, whilst the enriched-quinone thin film is exploited for immobilizing dispersine B, an enzyme. In vitro functional assays demonstrated the dual antibacterial and anti-biofouling resistance properties of the coatings due to the antibacterial effect of silver and the fouling resistance of grafted dispersine B, respectively. Surfaces coated only with silver provide an antibacterial effect but fail to inhibit bacterial attachment, highlighting the usefulness of such dual-action surfaces. The approach presented here provides a simple and effective chemical pathway to construct powerful antibacterial surfaces for various industrial applications.

Linker-free covalent immobilization of nisin using atmospheric pressure plasma induced grafting

The linker-free covalent immobilization of polymers on surfaces has the potential to impart new properties and functions to surfaces for a wide range of applications. However, most current methods for the production of these surfaces involve multiple chemical steps and do not have a high degree of control over the chemical functionalities at the surface. A comprehensive study detailing the facile two-step covalent grafting of the antimicrobial peptide nisin onto polystyrene surfaces is reported. Functionalization is achieved using an atmospheric pressure plasma jet, and the reaction is monitored and compared with a standard wet chemical functionalization approach using a variety of analytical techniques. The reactive species produced by the atmospheric pressure plasma jet were analyzed by mass spectrometry and optical emission spectroscopy. The surface chemistry and topography of the functionalized surfaces were determined using contact angle measurements, Fourier infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy and atomic force microscopy respectively. Following surface analysis, the antimicrobial efficacy of the covalently grafted nisin against two major food borne pathogens (Staphylococcus aureus and Listeria monocytogenes) was assessed at two different pHs. The results demonstrated that a post-plasma treatment step after nisin deposition is required to covalently graft the peptide onto the surface. The covalent immobilization of nisin resulted in a significant reduction in bacterial counts within a short 30 minutes contact time. These surfaces were also significantly more antimicrobial compared to those prepared via a more traditional wet chemical approach indicating that the reported method could be a less expensive and less time consuming alternative.

Models for biomedical interfaces: a computational study of quinone-functionalized amorphous silica surface features

The structural and IR features of amorphous silica surfaces, functionalized by ortho-benzoquinone groups, were computed to obtain a deeper knowledge of multifunctional coatings with antimicrobial properties.

Non-Equilibrium Plasma Processing for the Preparation of Antibacterial Surfaces

Non-equilibrium plasmas offer several strategies for developing antibacterial surfaces that are able to repel and/or to kill bacteria. Due to the variety of devices, implants, and materials in general, as well as of bacteria and applications, plasma assisted antibacterial strategies need to be tailored to each specific surface. Nano-composite coatings containing inorganic (metals and metal oxides) or organic (drugs and biomolecules) compounds can be deposited in one step, and used as drug delivery systems. On the other hand, functional coatings can be plasma-deposited and used to bind antibacterial molecules, for synthesizing surfaces with long lasting antibacterial activity. In addition, non-fouling coatings can be produced to inhibit the adhesion of bacteria and reduce the formation of biofilm. This paper reviews plasma-based strategies aimed to reduce bacterial attachment and proliferation on biomedical materials and devices, but also onto materials used in other fields. Most of the activities described have been developed in the lab of the authors.

Nisin anchored cellulose nanofibers for long term antimicrobial active food packaging

Increasing consumer demand for high performance bio-based materials in order to develop microbiologically safer foods has forced the food industry to revise their packaging strategies.

Bio-inspired terpolymers containing dopamine, cations and MPC: a versatile platform to construct a recycle antibacterial and antifouling surface

A new kind of bio-inspired terpolymer was synthesized by a conventional free radical terpolymerization of dopamine methacrylamide (DMA), 2-(dimethylamino)-ethyl methacrylate (DMAEMA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) with azobisisobutyronitrile (AIBN) as an initiator. DMA consists of a biomimetic adhesive side chain covalently linked to a polymerizable methacrylate monomer. 1H NMR and gel permeation chromatography confirmed the successful synthesis of P(DMA-co-MPC-co-DMAEMA). The terpolymer could self-assemble on the macroscopic planar substrates with DMA as an anchor. After being quaternized by 1-bromo-heptane, terpolymers of P(DMA-co-MPC-co-DMAEMA+) with bactericidal function were obtained. The self-assembly terpolymer on the substrate was confirmed by X-ray photoelectron spectroscopy, water contact angle, spectroscopic ellipsometry and atomic force microscopy. The hydrophilicity and antifouling properties of the self-assembly coating increased greatly against bacteria, protein and cells with the increase of MPC content. As the existence of bactericidal cations for electrostatic targeting of bacteria as well as membrane lysis, the terpolymer coating showed excellent bactericidal function against E. coli and S. aureus. Biofilm inhibition assay showed that terpolymer coating was very efficient to resist bacterial adhesion and biofilm formation in a nutrient environment. Bacteria could be continuously "captured" and killed by the terpolymer coating, and then bacteria corpse was released into the solution. Importantly, this work provides a versatile strategy for the fabrication of a recycle antibacterial and antifouling surface to modify biomaterials.

Computational Study of Acidic and Basic Functionalized Crystalline Silica Surfaces as a Model for Biomaterial Interfaces

In silico modeling of acidic (CH2COOH) or basic (CH2NH2) functionalized silica surfaces has been carried out by means of a density functional approach based on a gradient-corrected functional to provide insight into the characterization of experimentally functionalized surfaces via a plasma method. Hydroxylated surfaces of crystalline cristobalite (sporting 4.8 OH/nm(2)) mimic an amorphous silica interface as unsubstituted material. To functionalize the silica surface we transformed the surface Si-OH groups into Si-CH2COOH and Si-CH2NH2 moieties to represent acidic/basic chemical character for the substitution. Structures, energetics, electronic, and vibrational properties were computed and compared as a function of the increasing loading of the functional groups (from 1 to 4 per surface unit cell). Classical molecular dynamics simulations of selected cases have been performed through a Reax-FF reactive force field to assess the mobility of the surface added chains. Both DFT and force field calculations identify the CH2NH2 moderate surface loading (1 group per unit cell) as the most stable functionalization, at variance with the case of the CH2COOH group, where higher loadings are preferred (2 groups per unit cell). The vibrational fingerprints of the surface functionalities, which are the ν(C═O) stretching and δ(NH2) bending modes for acidic/basic cases, have been characterized as a function of substitution percentage in order to guide the assignment of the experimental data. The final results highlighted the different behavior of the two types of functionalization. On the one hand, the frequency associated with the ν(C═O) mode shifts to lower wavenumbers as a function of the H-bond strength between the surface functionalities (both COOH and SiOH groups), and on the other hand, the δ(NH2) frequency shift seems to be caused by a subtle balance between the H-bond donor and acceptor abilities of the NH2 moiety. Both sets of data are in general agreement with experimental measurements on the corresponding silica-functionalized materials and provide finer details for a deeper interpretation of experimental spectra.