One-step synthesis of amphiphilic copolymers PDMS-b-PEG using tris(pentafluorophenyl)borane and subsequent study of encapsulation and release of curcumin

A series of amphiphilic block copolymer (BCP) micelles based on poly(dimethylsiloxane) (PDMS) and poly(ethylene glycol) (PEG) were synthesized by a one-step reaction in the presence of tris(pentafluorophenyl)borane (BCF) as a catalyst. The structural composition of PDMS-b-PEG (PR11) and PEG-b-PDMS-b-PEG (PR12) was corroborated by FTIR, 29Si NMR, and TGA. The BCPs were assembled in an aqueous solution, obtaining micelles between 57 and 87 nm in size. PR11 exhibited a higher (2.0 g L-1) critical micelle concentration (CMC) than PR12 (1.5 g L-1) due to the short chain length. The synthesized nano micelles were used to encapsulate curcumin, which is one of three compounds of turmeric plant 'Curcuma longa' with significant biological activities, including antioxidant, chemoprotective, antibacterial, anti-inflammatory, antiviral, and anti-depressant properties. The encapsulation efficiency of curcumin was 60% for PR11 and 45% for PR12. Regarding the release study, PR11 delivered 53% curcumin after five days under acidic conditions (pH of 1.2) compared to 43% at a pH of 7.4. The degradation products of curcumin were observed under basic conditions and were more stable at acidic pH. In both situations, the release process is carried out by breaking the silyl-ether bond, allowing the release of curcumin. PR11 showed prolonged release times, so it could be used to reduce ingestion times and simultaneously work as a nanocarrier for other hydrophobic drugs.

Substrate effect on charging of electrified graphene/water interfaces

Graphene, a transparent two-dimensional (2D) conductive electrode, has brought extensive new perspectives and prospects to electrochemical systems, such as chemical sensors, energy storage, and energy conversion devices. In many of these applications, graphene, supported on a substrate, is in contact with an aqueous solution. An increasing number of studies indicate that the substrate, rather than graphene, determines the organization of water in contact with graphene, i.e., the electric double layer (EDL) structure near the electrified graphene, and the wetting behavior of the graphene: the graphene sheet is transparent in terms of its supporting substrate. By applying surface-specific heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy to the silicon dioxide (SiO2)-supported graphene electrode/aqueous electrolyte interface and comparing the data with those for the calcium fluoride (CaF2)-supported graphene [Y. Wang et al., Angew. Chem., Int. Ed., 2023, 62, e202216604], we discuss the impact of the different substrates on the charging of both the graphene and the substrate upon applying potentials. The SiO2-supported graphene shows pseudocapacitive behavior, consistent with the CaF2-supported graphene case, although the surface charges on SiO2 and CaF2 differ substantially. The SiO2 surface is already negatively charged at +0.57 V (vs. Pd/H2), and the negative surface charge is doubled when negative potentials are applied, in contrast with the CaF2 case, where the positive charge is reduced when negative potentials are applied. Interestingly, the charging of the graphene sheet is almost identical between the negatively charged SiO2 surface and positively charged CaF2 surface, demonstrating that the graphene charging is decoupled from the charging of the substrates.

Nonviral In Vivo Delivery of CRISPR-Cas9 Using Protein-Agnostic, High-Loading Porous Silicon and Polymer Nanoparticles

The complexity of CRISPR machinery is a challenge to its application for nonviral in vivo therapeutic gene editing. Here, we demonstrate that proteins, regardless of size or charge, efficiently load into porous silicon nanoparticles (PSiNPs). Optimizing the loading strategy yields formulations that are ultrahigh loading─>40% cargo by volume─and highly active. Further tuning of a polymeric coating on the loaded PSiNPs yields nanocomposites that achieve colloidal stability under cryopreservation, endosome escape, and gene editing efficiencies twice that of the commercial standard Lipofectamine CRISPRMAX. In a mouse model of arthritis, PSiNPs edit cells in both the cartilage and synovium of knee joints, and achieve 60% reduction in expression of the therapeutically relevant MMP13 gene. Administered intramuscularly, they are active over a broad dose range, with the highest tested dose yielding nearly 100% muscle fiber editing at the injection site. The nanocomposite PSiNPs are also amenable to systemic delivery. Administered intravenously in a model that mimics muscular dystrophy, they edit sites of inflamed muscle. Collectively, the results demonstrate that the PSiNP nanocomposites are a versatile system that can achieve high loading of diverse cargoes and can be applied for gene editing in both local and systemic delivery applications.

Non-ionic surfactant-assisted controlled release of oxyresveratrol on dendritic fibrous silica for topical applications

We present a simple and eco-friendly method for controlled drug release using a surfactant-assisted method. Oxyresveratrol (ORES) was co-loaded with a non-ionic surfactant onto KCC-1, a dendritic fibrous silica, using an ethanol evaporation technique. The carriers were characterized using FE-SEM, TEM, XRD, N₂ adsorption-desorption, FTIR, and Raman spectroscopy, and the loading and encapsulation efficiencies were assessed using TGA and DSC techniques. Contact angle and zeta potential were used to determine the surfactant arrangement and the particle charges. To investigate the effects of different surfactants (Tween 20, Tween 40, Tween 80, Tween 85, and Span 80) on ORES release, we conducted experiments under different pH and temperature conditions. Results showed that the types of surfactants, drug loading content, pH, and temperature significantly affected the drug release profile. The percentage of drug loading efficiency of the carriers was in the range of 80 %-100 %, and the release of ORES was in the order of M/KCC-1 > M/K/S80 > M/K/T40 > M/K/T20 > MK/T80 > M/K/T85 at 24 h. Furthermore, the carriers provided excellent protection for ORES against UVA and maintained its antioxidant activity. KCC-1 and Span 80 enhanced the cytotoxicity to HaCaT cells, while Tween 80 suppressed the cytotoxicity.

Novel Oxygen- and Curcumin-Laden Ionic Liquid@Silica Nanocapsules for Enhanced Antimicrobial Photodynamic Therapy

The efficiency of photodynamic therapy is often limited by the scarcity of oxygen at the target site. To address this problem, this work proposes the development of a new nanosystem for antimicrobial photodynamic therapy applications (aPDT) where the natural-origin photosensitizer curcumin (CUR) is immersed in an oxygen-rich environment. Inspired by the perfluorocarbon-based photosensitizer/O2 nanocarriers reported in the literature, we developed a new type of silica nanocapsule containing curcumin dissolved in three hydrophobic ionic liquids (ILs) with high oxygen dissolving capacities. The nanocapsules (CUR-IL@ncSi), prepared by an original oil-in-water microemulsion/sol-gel method, had a high IL content and exhibited clear capacities to dissolve and release significant amounts of oxygen, as demonstrated by deoxygenation/oxygenation studies. The ability of CUR-IL solutions and of CUR-IL@ncSi to generate singlet oxygen (1O2) upon irradiation was confirmed by the detection of 1O2 phosphorescence at 1275 nm. Furthermore, the enhanced capacities of oxygenated CUR-IL@ncSi suspensions to generate 1O2 upon irradiation with blue light were confirmed by an indirect spectrophotometric method. Finally, preliminary microbiological tests using CUR-IL@ncSi incorporated into gelatin films showed the occurrence of antimicrobial effects due to photodynamic inactivation, with their relative efficiencies depending on the specific IL in which curcumin was dissolved. Considering these results, CUR-IL@ncSi has the potential to be used in the future to develop biomedical products with enhanced oxygenation and aPDT capacities.

In Vitro Efficacy of Curcumin-Loaded Amine-Functionalized Mesoporous Silica Nanoparticles against MCF-7 Breast Cancer Cells

Purpose: Mesoporous silica nanoparticles (MSNs) have drawn substantial interest as drug nanocarriers for breast cancer therapy. Nevertheless, because of the hydrophilic surfaces, the loading of well-known hydrophobic polyphenol anticancer agent curcumin (Curc) into MSNs is usually very low. Methods: For this purpose, Curc molecules were loaded into amine-functionalized MSNs (MSNs-NH₂ -Curc) and characterized using thermal gravimetric analysis (TGA), Fourier-transform infrared (FTIR), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), Brunauer-Emmett-Teller (BET). MTT assay and confocal microscopy, respectively, were used to determine the cytotoxicity and cellular uptake of the MSNs-NH₂ - Curc in the MCF-7 breast cancer cells. Besides, the expression levels of apoptotic genes were evaluated via quantitative polymerase chain reaction (qPCR) and western blot. Results: It was revealed that MSNs-NH₂ possessed high values of drug loading efficiency and exhibited slow and sustained drug release compared to bare MSNs. According to the MTT findings, while the MSNs-NH₂ -Curc were nontoxic to the human non-tumorigenic MCF-10A cells at low concentrations, it could considerably decrease the viability of MCF-7 breast cancer cells compared to the free Curc in all concentrations after 24, 48 and 72 hours exposure times. A cellular uptake study using confocal fluorescence microscopy confirmed the higher cytotoxicity of MSNs-NH₂ -Curc in MCF-7 cells. Further, it was found that the MSNs-NH₂ -Curc could drastically affect the mRNA and protein levels of Bax, Bcl-2, caspase 3, caspase 9, and hTERT relative to the free Curc treatment. Conclusion: Taken together, these preliminary results suggest the amine-functionalized MSNs-based drug delivery platform as a promising alternative approach for Curc loading and safe breast cancer treatment.

Nanostructure of humic acid adsorption layer in the presence of Cs and Sr ions on the surface of waste material obtained from residue after supercritical extraction of hops

Adsorption of ionic molecules at the solid–liquid interface depends on various interactions, particles surface properties as well as the presence of the additional substance in the analyzed systems. The waste material obtained from the supercritical fluid extraction process was used as an adsorbent. The plant-based biosorbent structure was fully characterized. Then the humic acid (constituting the common interfering substance found in the environmental samples) sorption on the hop cones was investigated in the absence and presence of Sr/Cs ions under various pH conditions. Hence, the metal cation valence can influence the interactions between the colloidal system constituents and the adsorption layer structure. Determining the mutual interactions in the complex systems is important due to the potential possibility of using the waste sorbent to remove the radioactive Cs and Sr isotopes from the aquatic environment. Due to the lack of a porous structure of the sorbent and the high surface density of the charge, the metal ions are bound directly on the particles surface. The humic acid (HA) adsorption is greatly pH dependent—the largest removal was achieved under the acidic conditions (Qads = 88.69 mg/g), while the HA sorption process at pH 9 is impeded by a large negative charge deposited at the solid–liquid interface (Qads = 7.06 mg/g). At pH 3, formation of multilayer adsorption structure contributes to the effective removal of organic impurities. The metal ions valence significantly affects the humic acid binding mechanism. Divalent Sr acts like a “bridge” increasing the number of biosorbent active sites (at pH = 3 the HA adsorption increases almost twofold from 88.69 to 156.46 mg/g in the Sr ions), whereas the Cs+ ions leads to the reduction in the HA removal efficiency (Qads. = 46.31 mg/g under the same conditions).

Advances in smart delivery of food bioactive compounds using stimuli-responsive carriers: Responsive mechanism, contemporary challenges, and prospects

Many important food bioactive compounds are plant secondary metabolites that have traditional applications for health promotion and disease prevention. However, the chemical instability and poor bioavailability of these compounds represent major challenges to researchers. In the last decade, therefore, major impetus has been given for the research and development of advanced carrier systems for the delivery of natural bioactive molecules. Among them, stimuli-responsive carriers hold great promise for simultaneously improving stability, bioavailability, and more importantly delivery and on-demand release of intact bioactive phytochemicals to target sites in response to certain stimuli or combination of them (e.g., pH, temperature, oxidant, enzyme, and irradiation) that would eventually enhance therapeutic outcomes and reduce side effects. Hybrid formulations (e.g., inorganic-organic complexes) and multi-stimuli-responsive formulations have demonstrated great potential for future studies. Therefore, this review systematically compiles and assesses the recent advances on the smart delivery of food bioactive compounds, particularly quercetin, curcumin, and resveratrol through stimuli-responsive carriers, and critically reviews their functionality, underlying triggered-release mechanism, and therapeutic potential. Finally, major limitations, contemporary challenges, and possible solutions/future research directions are highlighted. Much more research is needed to optimize the processing parameters of existing formulations and to develop novel ones for lead food bioactive compounds to facilitate their food and nutraceutical applications.

Simultaneous Methylene Blue Adsorption and pH Neutralization of Contaminated Water by Rice Husk Ash

In this study, the potential of rice husk ash (RHA) to act as an adsorbent for treating dye-containing wastewater was demonstrated. The RHA used in this study contained 91.7% silica, which was composed of crystalline (cristobalite and tridymite) and amorphous phases. The mechanochemical treatment of RHA led to an increase in its specific surface area from 6.2 to 14.6 m²/g in 15 min and dramatically improved its methylene blue (MB) adsorption ability. Langmuir adsorption isotherms revealed that the maximum adsorption capacity of the treated RHA was 8.59 mg/g, which is 2.45 times higher than that of raw RHA. pH-dependent adsorption studies on the RHA revealed that MB was adsorbed on the deprotonated Q³ silanol through electrostatic interactions. Moreover, the RHA adsorbent showed pH buffering at a pH value of approximately 7; thus, the pH of the solution could be neutralized simultaneously with the adsorptive removal of MB.

Curcumin induced G2/M cycle arrest in SK-N-SH neuroblastoma cells through the ROS-mediated p53 signaling pathway

Neuroblastoma (NB) is a solid tumor in the nervous system and has a high mortality rate in children. Curcumin has well-characterized anticancer properties, while there is no effective method in clinical treatment. MTT assays revealed that curcumin dramatically inhibited the proliferation of SK-N-SH cells. Compared with the control group, curcumin markedly restrained the migration of SK-N-SH cells. Curcumin induced SK-N-SH cell apoptosis by G2/M cycle arrest and activated caspase-3 activity. Furthermore, curcumin promoted the overproduction of intracellular ROS and apoptosis induced by activating p53 and Bcl-2 signal pathways. This finding demonstrated the application of curcumin is an effective strategy for the therapeutics of NB.

Biomass-Derived Dialdehyde Cellulose Cross-linked Chitosan-Based Nanocomposite Hydrogel with Phytosynthesized Zinc Oxide Nanoparticles for Enhanced Curcumin Delivery and Bioactivity

A sustainable biomass-based nanocomposite hydrogel was formulated, characterized, and applied for curcumin delivery. Phytosynthesized zinc oxide nanoparticles (ZnO NPs) employing musk melon (Cucumis melo) seed extract was embedded in the hydrogel matrices and cross-linked using Dialdehyde cellulose prepared from sugarcane (Saccharum officinarum) bagasse (SCB). Nanoparticle incorporation enhanced the hydrogel's swelling degree to 4048% at pH 4.0. Also, an improved tensile strength of 14.1 ± 0.32 MPa was exhibited by the nanocomposite hydrogel compared to 9.79 ± 0.76 MPa for the pure chitosan cellulose hydrogel. A curcumin loading efficiency of 89.68% with around 30% increased loading was exhibited for the nanocomposite hydrogel. A Fickian diffusion-controlled curcumin release mechanism with maximum release at pH 7.4 was obtained. The synergistic effect on the antimicrobial activity was exhibited against Staphylococcus aureus and Trichophyton rubrum. The in vitro cytotoxicity studies employing L929 cells and A431 cells demonstrated good biocompatibility and enhanced anticancer activity of the curcumin-loaded green nanocomposite hydrogel compared to pure curcumin.

Enhanced functional properties of biopolymer film incorporated with curcurmin-loaded mesoporous silica nanoparticles for food packaging

Curcumin loaded mesoporous silica nanoparticle (SBA-15) was incorporated into chitosan (CS) film to improve the functional properties of pure CS film. Curcumin was loaded into SBA-15 (SBA-15-Cur) through a rotavapor method. The structural properties of SBA-15-Cur were characterised in detail by small-angle X-ray scattering, fourier transform-infrared (FT-IR) spectroscopy, transmission electron microscopy and N₂ adsorption-desorption analyses. The CS/SBA-15-Cur bionanocomposite film was prepared by solvent casting. The mechanical properties of the bionanocomposite film were improved by the addition of the SBA-15-Cur nanofiller, as revealed by the FT-IR analysis of the biocomposite film. However, the water vapour permeability of the films was not significantly influenced by the filler. Release studies suggested that the CS/SBA-15-Cur bionanocomposite film exhibited pH-responsive and sustained release behaviour of curcumin. The CS/SBA-15-Cur film demonstrated efficient antimicrobial activity against Staphylococcus aureus and Escherichia coli. These data indicated that the CS/SBA-15-Cur bionanocomposite film could be a promising active food packaging material.

Solid Lipid Nanoparticles: Emerging Colloidal Nano Drug Delivery Systems

Solid lipid nanoparticles (SLNs) are nanocarriers developed as substitute colloidal drug delivery systems parallel to liposomes, lipid emulsions, polymeric nanoparticles, and so forth. Owing to their unique size dependent properties and ability to incorporate drugs, SLNs present an opportunity to build up new therapeutic prototypes for drug delivery and targeting. SLNs hold great potential for attaining the goal of targeted and controlled drug delivery, which currently draws the interest of researchers worldwide. The present review sheds light on different aspects of SLNs including fabrication and characterization techniques, formulation variables, routes of administration, surface modifications, toxicity, and biomedical applications.

Lipid-coated mesoporous silica microparticles for the controlled delivery of β-galactosidase into intestines

Coating of mesoporous silica carriers with dioleoylphosphatidylcholine allowed triggering of the selective delivery of functional enzymes by lipolysis under simulated intestinal conditions.

Silica-based systems for oral delivery of drugs, macromolecules and cells

According to the US Food and Drug Administration and the European Food Safety Authority, amorphous forms of silica and silicates are generally recognized to be safe as oral delivery ingredients in amounts up to 1500mg per day. Silica is used in the formulation of solid dosage forms, e.g. tablets, as glidant or lubricant. The synthesis of silica-based materials depends on the payload nature, drug, macromolecule or cell, and on the target release (active or passive). In the literature, most of the examples deal with the encapsulation of drugs in mesoporous silica nanoparticles. Still to date limited reports concerning the delivery of encapsulated macromolecules and cells have been reported in the field of oral delivery, despite the multiple promising examples demonstrating the compatibility of the sol-gel route with biological entities, likewise the interest of silica as an oral carrier. Silica diatoms appear as an elegant, cost-effective and promising alternative to synthetic sol-gel-based materials. This review reports the latest advances silica-based systems and discusses the potential benefits and drawbacks of using silica for oral delivery of drugs, macromolecules or cells.

Effect of Meso vs Macro Size of Hierarchical Porous Silica on the Adsorption and Activity of Immobilized β-Galactosidase

β-Galactosidase (β-Gal) is one of the most important enzymes used in milk processing for improving their nutritional quality and digestibility. Herein, β-Gal has been entrapped into a meso-macroporous material (average pore size 9 and 200 nm, respectively) prepared by a sol-gel method from a silica precursor and a dispersion of solid lipid nanoparticles in a micelle phase. The physisorption of the enzyme depends on the concentration of the feed solution and on the pore size of the support. The enzyme is preferentially adsorbed either in mesopores or in macropores, depending on its initial concentration. Moreover, this selective adsorption, arising from the oligomeric complexation of the enzyme (monomer/dimer/tetramer), has an effect on the catalytic activity of the material. Indeed, the enzyme encapsulated in macropores is more active than the enzyme immobilized in mesopores. Designed materials containing β-Gal are of particular interest for food applications and potentially extended to bioconversion, bioremediation, or biosensing when coupling the designed support with other enzymes.

Curcumin loaded mesoporous silica: an effective drug delivery system for cancer treatment

In the present study, we report the delivery of anti-cancer drug curcumin to cancer cells using mesoporous silica materials. A series of mesoporous silica material based drug delivery systems (S2, S4 and S6) were first designed and developed through the amine functionalization of KIT-6, MSU-2 and MCM-41 followed by the loading of curcumin. The curcumin loaded materials were characterized with several physico-chemical techniques and thoroughly screened on cancer cells to evaluate their in vitro drug delivery efficacy. All the curcumin loaded silica materials exhibited higher cellular uptake and inhibition of cancer cell viability compared to pristine curcumin. The effective internalization of curcumin in cancer cells through the mesoporous silica materials initiated the generation of intracellular reactive oxygen species and the down regulation of poly ADP ribose polymerase (PARP) enzyme levels compared to free curcumin leading to the activation of apoptosis. This study shows that the anti-cancer activity of curcumin can be potentiated by loading onto mesoporous silica materials. Therefore, we strongly believe that mesoporous silica based curcumin loaded drug delivery systems may have future potential applications for the treatment of cancers.

Surface decoration of selenium nanoparticles with curcumin induced HepG2 cell apoptosis through ROS mediated p53 and AKT signaling pathways

Curcumin surface decorated selenium nanoparticles (Se@Cur) has been described in this study. The apoptotic signaling pathways triggered by the Se@Cur are p53 and AKT pathways.

Hierarchical mesoporous silica nanoparticles for tailorable drug release

In order to modulate the drug release profiles, the hierarchical mesoporous silica nanoparticles (HMSNs) are fabricated by a two-step synthetic process. The HMSNs exhibit uniform spherical morphology with nanoscaled size, well mono-dispersed size distribution, and smooth surface. Because of the hierarchical pore structures with different mesoporous sizes and morphologies (partial open and partial blocked pores), the HMSNs can release the loaded drug in a controlled manner. The hierarchical mesoporous structures directed drug release profiles suggest a feasible strategy to tailor drug release behaviors. Meanwhile, the HMSNs exhibit good biocompatibility. Therefore, the HMSNs having tailorable drug release capacity would be a potential candidate to improve their therapeutic efficiency for drug delivery systems.

Solid lipid nanoparticles as attractive drug vehicles: Composition, properties and therapeutic strategies

This work briefly reviews up-to-date developments in solid lipid nanoparticles (SLNs) as effective nanocolloidal system for drug delivery. It summarizes SLNs in terms of their preparation, surface modification and properties. The application of SLNs as a carrier system enables to improve the therapeutic efficacy of drugs from various therapeutic groups. Present uses of SLNs include cancer therapy, dermatology, bacterial infections, brain targeting and eye disorders among others. The usage of SLNs provides enhanced pharmacokinetic properties and modulated release of drugs. SLN ubiquitous application results from their specific features such as possibility of surface modification, increased permeation through biological barriers, resistance to chemical degradation, possibility of co-delivery of various therapeutic agents or stimuli-responsiveness. This paper will be useful to the scientists working in the domain of SLN-based drug delivery systems.

Core–shell alginate@silica microparticles encapsulating probiotics

Lactobacillus rhamnosus GG (LGG) was encapsulated in core–shell alginate–silica microcapsules by coating the electrosprayed ionogel with a silica shell via hydrolysis/condensation of alkoxysilane precursors.

Core-shell microcapsules of solid lipid nanoparticles and mesoporous silica for enhanced oral delivery of curcumin

Newly designed microcapsules (MC) combining a core of solid lipid nanoparticle (SLN) and a mesoporous silica shell have been developed and explored as oral delivery system of curcumin (CU). CU-loaded MC (MC-CU) are 2 μm sized and have a mesoporous silica shell of 0.3 μm thickness with a wormlike structure as characterized by small angle X-ray scattering (SAXS), nitrogen adsorption/desorption and transmission electron microscopy (TEM) measurements. It was found that SLN acts as reservoir of curcumin while the mesoporous shell insures the protection and the controlled release of the drug. MC-CU displayed a pH-dependent in vitro release profile with marked drug retention at pH 2.8. Neutral red uptake assay together with confocal laser scanning microscopy (CLSM) showed a good cell tolerance to MC-CU at relatively high concentration of inert materials. Besides, the cell-uptake test revealed that fluorescent-MC were well internalized into Caco-2 cells, confirming the possibility to use MC for gut cells targeting. These findings suggest that organic core-silica shell microcapsules are promising drug delivery systems with enhanced bioavailability for poorly soluble drugs.

Histamine-functionalized copolymer micelles as a drug delivery system in 2D and 3D models of breast cancer

Histamine functionalized block copolymers based on poly(allyl glycidyl ether)-b-poly(ethylene oxide) (PAGE-b-PEO) were prepared with different ratios of histamine and octyl or benzyl groups using UV-initiated thiol-ene click chemistry. At neutral pH, the histamine units are uncharged and hydrophobic, while in acidic environments, such as in the endosome, lysosomes, or extracellular sites of tumours, the histamine groups are positively charged and hydrophilic. pH responsible polymer drug delivery systems is a promising route to site specific delivery of drugs and offers the potential to avoid side effects of systemic treatment. Our detailed in vitro experiments of the efficacy of drug delivery and the intracellular localization characteristics of this library of NPs in 2D and 3D cultures of breast cancer revealed that the 50% histamine-modified polymer loaded with DOX exhibited rapid accumulation in the nucleus of free DOX within 2 h. Confocal studies showed enhanced mitochondrial localization and lysosomal escape when compared to controls. From these combined studies, it was shown that by accurately tuning the structure of the initial block copolymers, the resulting self-assembled NPs can be designed to exploit histamine as an endosomal escape trigger and the octyl/benzyl units give rise to a hydrophobic core resulting in highly efficacious drug delivery systems (DDS) with control over intracellular localization. Optimization and rational control of the intracellular localization of both DDS and the parent drug can give nanomedicines a substantial increase in efficacy and should be explored in future studies.

Metallo-solid lipid nanoparticles as colloidal tools for meso-macroporous supported catalysts

Meso-macroporous silica containing iron oxide nanoparticles (15-20 nm) was synthesized by formulating solid lipid nanoparticles and metallosurfactant as both template and metal source. Because of the high active surface area of the catalyst, the material exhibits an excellent performance in a Fenton-like reaction for methylene blue (MB) degradation, even at low amount of iron oxide (5% TOC after 14 h).

pH- and glutathione-responsive release of curcumin from mesoporous silica nanoparticles coated using tannic acid–Fe(iii) complex

A novel pH- and glutathione-responsive drug delivery system has been developed by deposition of tannic acid (TA)–Fe(iii) complex on the surface of mesoporous silica nanoparticles (MSN).