Pyrococcus furiosus Argonaute-Based Fluorometric Biosensor for One-Tube Detection of Cancer-Associated Single Nucleotide Polymorphisms in MicroRNAs

MicroRNA-related single nucleotide polymorphisms (miR-SNPs) are promising biomarkers for cancer diagnostics, yet accurate detection methods remain limited. Here, we introduce a ligation-triggered Pyrococcus furiosus Argonaute (PfAgo) cleavage (LTAC) strategy for the sensitive detection of miR-SNPs, demonstrated using the rs11614913 SNP in miR-196a2, which is associated with nonsmall cell lung cancer (NSCLC). The mutant miR-196a2T serves as a scaffold for the formation of guide DNA (gDNA) catalyzed by the SplintR ligase, leading to PfAgo activation and enhanced fluorescence. In contrast, wild-type miR-196a2C cannot facilitate gDNA formation and thus fails to activate PfAgo. This method exhibits a linear relationship with the logarithm of the miR-196a2T concentration over a range of 0.2 pM to 100 nM, achieving a low detection limit of 0.15 pM. Analysis of NSCLC patient samples using LTAC reveals elevated levels of the rs11614913 SNP in miR-196a2 compared to healthy controls, underscoring the diagnostic potential of LTAC.

Self-assembled endogenous DNA nanoparticles for auto-release and expression of the eGFP gene in Bacillus subtilis

The development of DNA delivery techniques is critical to promote the wider use of deoxyribonucleic acids as cellular transporters. The present study aimed to develop a type of DNA nanoparticle (citZ-box) to automatically load and release cargo. The restriction enzyme can cleave citZ-boxes at pro-designed sites, and the enhanced green fluorescent protein gene (eGFP) can be delivered into the B. subtilis protoplasts by them. The process of eGFP expression is recorded using a confocal microscope over 4 h. Here, multiscaffold and multimodular designs are used for citZ-box assembly with a DAEDALUS module, DX_cage_design and rem (edge_length, 21), to ensure the structure was predicted as B-type DNA. Finally the citZ-box is estimated to be a 50.7 nm cube. The 3D structure of the citZ-box particle is detected to be approximately 50.3 ± 0.3 nm. DNA nanoparticles prepared as citZ-boxes have great potential as drug carriers with automatic loading and releasing abilities.

Ultrasensitive pathogen detection with a rolling circle amplification-empowered multiplex electrochemical DNA sensor

We report a highly sensitive and selective multiplex assay by empowering an electrochemical DNA sensor with isothermal rolling circle amplification. The assay could simultaneously detect and discriminate three common entero-pathogens in a single reaction, with femtomolar sensitivity. It is useful for field- or resource-limited settings.

Advances in multiplexed techniques for the detection and quantification of microRNAs

MicroRNA detection is currently a crucial analytical chemistry challenge: almost 2000 papers were referenced in PubMed in 2018 and 2019 for the keywords "miRNA detection method". MicroRNAs are potential biomarkers for multiple diseases including cancers, neurodegenerative and cardiovascular diseases. Since miRNAs are stably released in bodily fluids, they are of prime interest for the development of non-invasive diagnosis methods, such as liquid biopsies. Their detection is however challenging, as high levels of sensitivity, specificity and robustness are required. The analysis also needs to be quantitative, since the aim is to detect miRNA concentration changes. Moreover, a high multiplexing capability is also of crucial importance, since the clinical potential of miRNAs probably lays in our ability to perform parallel mapping of multiple miRNA concentrations and recognize typical disease signature from this profile. A plethora of biochemical innovative detection methods have been reported recently and some of them provide new solutions to the problem of sensitive multiplex detection. In this review, we propose to analyze in particular the new developments in multiplexed approaches to miRNA detection. The main aspects of these methods (including sensitivity and specificity) will be analyzed, with a particular focus on the demonstrated multiplexing capability and potential of each of these methods.

Optical Biosensors for the Detection of Rheumatoid Arthritis (RA) Biomarkers: A Comprehensive Review

A comprehensive review of optical biosensors for the detection of biomarkers associated with rheumatoid arthritis (RA) is presented here, including microRNAs (miRNAs), C-reactive protein (CRP), rheumatoid factor (RF), anti-citrullinated protein antibodies (ACPA), interleukin-6 (IL-6) and histidine, which are biomarkers that enable RA detection and/or monitoring. An overview of the different optical biosensors (based on fluorescence, plasmon resonances, interferometry, surface-enhanced Raman spectroscopy (SERS) among other optical techniques) used to detect these biomarkers is given, describing their performance and main characteristics (limit of detection (LOD) and dynamic range), as well as the connection between the respective biomarker and rheumatoid arthritis. It has been observed that the relationship between the corresponding biomarker and rheumatoid arthritis tends to be obviated most of the time when explaining the mechanism of the optical biosensor, which forces the researcher to look for further information about the biomarker. This review work attempts to establish a clear association between optical sensors and rheumatoid arthritis biomarkers as well as to be an easy-to-use tool for the researchers working in this field.

Molecular inversion probe-rolling circle amplification with single-strand poly-T luminescent copper nanoclusters for fluorescent detection of single-nucleotide variant of SMN gene in diagnosis of spinal muscular atrophy

In this study, a simple fluorescent detection of survival motor neuron gene (SMN) in diagnosis of spinal muscular atrophy (SMA) based on nucleic acid amplification test and the poly-T luminescent copper nanoclusters (CuNCs) was established. SMA is a severely genetic diseases to cause infant death in clinical, and detection of SMN gene is a powerful tool for pre- and postnatal diagnosis of this disease. This study utilized the molecular inversion probe for recognition of nucleotide variant between SMN1 (c.840 C) and SMN2 (c.840 C  >  T) genes, and rolling circle amplification with a universal primer for production of poly-T single-strand DNA. Finally, the fluorescent CuNCs were formed on the poly-T single-strand DNA template with addition of CuSO₄ and sodium ascorbate. The fluorescence of CuNCs was only detected in the samples with the presence of SMN1 gene controlling the disease of SMA. After optimization of experimental conditions, this highly efficient method was performed under 50 °C for DNA ligation temperature by using 2U Ampligase, 3 h for rolling circle amplification, and the formation of the CuNCs by mixing 500 μM Cu²⁺ and 4 mM sodium ascorbate. Additionally, this highly efficient method was successfully applied for 65 clinical DNA samples, including 4 SMA patients, 4 carriers and 57 wild individuals. This label-free detection strategy has the own potential to not only be a general method for detection of SMN1 gene in diagnosis of SMA disease, but also served as a tool for detection of other single nucleotide polymorphisms or nucleotide variants in genetic analysis through designing the different sensing probes.

Progress in miRNA Detection Using Graphene Material-Based Biosensors

MicroRNAs (miRNAs) are short, endogenous, noncoding RNAs that play critical roles in physiologic and pathologic processes and are vital biomarkers for several disease diagnostics and therapeutics. Therefore, rapid, low-cost, sensitive, and selective detection of miRNAs is of paramount importance and has aroused increasing attention in the field of medical research. Among the various reported miRNA sensors, devices based on graphene and its derivatives, which form functional supramolecular nanoassemblies of π-conjugated molecules, have been revealed to have great potential due to their extraordinary electrical, chemical, optical, mechanical, and structural properties. This Review critically and comprehensively summarizes the recent progress in miRNA detection based on graphene and its derivative materials, with an emphasis on i) the underlying working principles of these types of sensors, and the unique roles and advantages of graphene materials; ii) state-of-the-art protocols recently developed for high-performance miRNA sensing, including representative examples; and iii) perspectives and current challenges for graphene sensors. This Review intends to provide readers with a deep understanding of the design and future of miRNA detection devices.

Advances in DNA/RNA detection using nanotechnology

Specific nucleic acid detection in vitro or in vivo has become increasingly important in the discovery of genetic diseases, diagnosing pathogen infection and monitoring disease treatment. One challenge, however, is that the amount of target nucleic acid in specimens is limited. Furthermore, direct sensing methods are also unable to provide sufficient sensitivity and specificity. Fortunately, due to advances in nanotechnology and nanomaterials, nanotechnology-based bioassays have emerged as powerful and promising approaches providing ultra-high sensitivity and specificity in nucleic acid detection. This chapter presents an overview of strategies used in the development and integration of nanotechnology for nucleic acid detection, including optical and electrical detection methods, and nucleic acid assistant recycling amplification strategies. Recent 5 years representative examples are reviewed to demonstrate the proof-of-concept with promising applications for DNA/RNA detection and the underlying mechanism for detection of DNA/RNA with the higher sensitivity and selectivity. Furthermore, a brief discussion of common unresolved issues and future trends in this field is provided both from fundamental and practical point of view.

Nanoarchitecture Frameworks for Electrochemical miRNA Detection

With revolutionary advances in next-generation sequencing, the human transcriptome has been comprehensively interrogated. These discoveries have highlighted the emerging functional and regulatory roles of a large fraction of RNAs suggesting the potential they might hold as stable and minimally invasive disease biomarkers. Although a plethora of molecular-biology- and biosensor-based RNA-detection strategies have been developed, clinical application of most of these is yet to be realized. Multifunctional nanomaterials coupled with sensitive and robust electrochemical readouts may prove useful in these applications. Here, we summarize the major contributions of engineered nanomaterials-based electrochemical biosensing strategies for the analysis of miRNAs. With special emphasis on nanostructure-based detection, this review also chronicles the needs and challenges of miRNA detection and provides a future perspective on the presented strategies.

A fishhook probe-based rolling circle amplification (FP-RCA) assay for efficient isolation and detection of microRNA without total RNA extraction

MicroRNA (miRNA) analysis has vital significance as a potential biomarker in clinical diagnosis and cancer research. In this study, a simple and practical technique was proposed for the detection of microRNAs from cell lysates based on fishhook probe-mediated rolling circle amplification (RCA) and fluorescence imaging with a smartphone. Compared with reported methods related to miRNA detection, this method mainly focused on simplicity, low cost and portability. Fishhook probes were designed and immobilized on the surface of streptavidin-coated magnetic beads for effectively recognizing and capturing target miRNAs, thus achieving simple and selective separation from the sample matrix. Moreover, the captured miRNAs initiated and transferred RCA reaction into solution, thus making the heterogeneous separation and homogeneous amplification reactions compatible. Excess circular probes as well as other nucleic acids were removed by two-step magnetic separation, minimizing nonspecific amplification and background signal. Using magnetic separation, high specificity was obtained even for one base mismatch strand. Moreover, the detection of miR-21 in cell lysates was performed without total RNA extraction. The fishhook probe-based rolling circle amplification (FP-RCA) assay integrated isolation and detection of miRNAs into a compact process, which was simple and effective without the need for bulky and expensive equipment such as centrifuge, thermal cycler and fluorescent microscope except for a blue light source device and a smartphone camera. Our study may provide a low-cost and reliable platform for miRNA detection and related research.

A Facile, Label-Free, and Universal Biosensor Platform Based on Target-Induced Graphene Oxide Constrained DNA Dissociation Coupling with Improved Strand Displacement Amplification

In this work, we report a low-cost and easy operation biosensor platform capable of detection of various analytes with high sensitivity and good selectivity. By ingeniously assigning the specific aptamer into a primer-template integrated DNA template, and using monolayer graphene oxide as a reversible and nonspecific inhibitor, the simple biosensor platform is set up. Without a target, the DNA template is constrained by the graphene oxide sheet and results in low signal. In the presence of a target, the constrained DNA template is released from the graphene oxide surface via a target-induced aptamer conformational change, and further amplified through the improved strand displacement amplification reaction. Therefore, the target detection is simply converted to DNA detection, and a correlation between target concentration and fluorescence signal can be set up. As a result, dozens-fold signal enhancement, high sensitivity, good selectivity, and potential practicability are achieved in target detection. More importantly, the proposed biosensor platform is versatile, meaning that it can greatly facilitate the detection of a variety of analytes. Due to the low cost and easy availability of sensing materials, and the elimination of tedious detection operations, we believe that this simple and universal biosensor platform can find wide applications in biological assay and environment monitoring.

Screening oligonucleotide sequences for silver staining and d-galactose visual detection using RCA silver staining in a tube

Oligonucleotides were screened for strongly silver-stained repetitive sequences. An 'AG'-clustered purine sequence showed strong staining, and the staining density can be compromised by disrupting the continuity of the 'AG'-clustered sequence. The staining-favored sequence was then employed in rolling circle amplification (RCA) for its product detection. A tube-staining method was developed for convenient and visual RCA assay. Moreover, by introducing GalR into RCA, d-galactose was detected by RCA tube-staining with naked eyes without any equipment. About 10 mM d-galactose can be easily identified, and the detection of d-galactose was specific in comparison with that of several other monosaccharides.

A simple and ultrasensitive fluorescence assay for single-nucleotide polymorphism

In this report, a simple, label-free and highly efficient nucleic acid amplification technique is developed for ultrasensitive detection of single-nucleotide polymorphism (SNP). Briefly, a designed padlock probe is first circularized by a DNA ligase when it perfectly complements to a mutant gene. Then, the mutant gene functions as a primer to initiate branched rolling circle amplification reaction (BRCA), generating a large number of branched DNA strands and a lot of pyrophosphate molecules which is equivalent to the number of nucleotides consumed. With the addition of a terpyridine-Zn(II) complex, pyrophosphate molecules can be sensitively detected owing to the formation of a fluorescent terpyridine-Zn(II)-pyrophosphate complex. The fluorescence intensity is directly associated with the content of the mutant gene in a sample solution. On the other hand, the circulation of the padlock probe is prohibited when it hybridizes with the wild-type gene. In this assay, the accumulative nature of the BRCA process produces a detection limit of 0.1 pM and an excellent selectivity factor of 1000 toward SNP. As little as 0.1% mutant in the wild-type gene can be successfully detected. The simple procedure, high sensitivity, and high selectivity of this assay offer a potentially viable alternative for routine SNP analysis. Graphical abstract A simple and label-free fluorescence assay for SNP detection by coupling BRCA with selective fluorescence detection of pyrophosphate using the terpyridine-Zn(II) complex.

Optical nano-biosensing interface via nucleic acid amplification strategy: construction and application

Modern optical detection technology plays a critical role in current clinical detection due to its high sensitivity and accuracy. However, higher requirements such as extremely high detection sensitivity have been put forward due to the clinical needs for the early finding and diagnosing of malignant tumors which are significant for tumor therapy. The technology of isothermal amplification with nucleic acids opens up avenues for meeting this requirement. Recent reports have shown that a nucleic acid amplification-assisted modern optical sensing interface has achieved satisfactory sensitivity and accuracy, high speed and specificity. Compared with isothermal amplification technology designed to work completely in a solution system, solid biosensing interfaces demonstrated better performances in stability and sensitivity due to their ease of separation from the reaction mixture and the better signal transduction on these optical nano-biosensing interfaces. Also the flexibility and designability during the construction of these nano-biosensing interfaces provided a promising research topic for the ultrasensitive detection of cancer diseases. In this review, we describe the construction of the burgeoning number of optical nano-biosensing interfaces assisted by a nucleic acid amplification strategy, and provide insightful views on: (1) approaches to the smart fabrication of an optical nano-biosensing interface, (2) biosensing mechanisms via the nucleic acid amplification method, (3) the newest strategies and future perspectives.

Transition Metal Dichalcogenide Nanosheets for Visual Monitoring PCR Rivaling a Real-Time PCR Instrument

Monitoring the progress of polymerase chain reactions (PCRs) is of critical importance in bioanalytical chemistry and molecular biology. Although real-time PCR thermocyclers are ideal for this purpose, their high cost has limited their applications in resource-poor areas. Direct visual detection would be a more attractive alternative. To monitor the PCR amplification, DNA-staining dyes, such as SYBR Green I (SG), are often used. Although these dyes give higher fluorescence when binding to double-stranded DNA products, they also yield strong background fluorescence in the presence of a high concentration of single-stranded (ss) DNA primers. In this work, we screened various nanomaterials and found that graphene oxide (GO), reduced GO, molybdenum disulfide (MoS₂), and tungsten disulfide (WS₂) can quench the fluorescence of nonamplified negative samples while still retaining strong fluorescence of positive ones. The signal ratio of positive-over-negative samples was enhanced by around 50-fold in the presence of these materials. In particular, MoS₂ and WS₂ nearly fully retained the fluorescence of the positive samples. The mechanism for MoS₂ and WS₂ to enhance PCR signaling is attributed to the adsorption of both the ssDNA PCR primers and SG with an appropriate strength. MoS₂ can also suppress nonspecific amplification caused by excess polymerase. Finally, this method was used to detect extracted transgenic soya GTS 40-3-2 DNA after PCR amplification. Compared with the samples without nanomaterials, the addition of MoS₂ could better distinguish the concentration difference of the template DNA, and the sensitivity of visual detection rivaled that from a real-time PCR instrument.

Multiplexed discrimination of microRNA single nucleotide variants through triplex molecular beacon sensors

Herein, we develop a new nanopore sensing strategy for the selective detection of microRNAs and single nucleotide variants (SNVs) based on triplex molecular beacon sensors.

DNA-Mediated rolling circle amplification for ultrasensitive detection of thrombin using MALDI-TOF mass spectrometry

A DNA-mediated rolling circle amplification (RCA) strategy was established for ultrasensitive and specific detection of thrombin via MALDI-TOF MS.

Sensitive detection of intracellular microRNA based on a flowerlike vector with catalytic hairpin assembly

A flowerlike nanovector with horn-shaped tips is developed for in situ detection of intracellular microRNA with multiple signal outputs.

Reduced Graphene Oxide-Based Solid-Phase Extraction for the Enrichment and Detection of microRNA

MicroRNAs (miRNAs) are endogenous molecules with regulatory functions. The purification and enrichment of miRNA are essential for its precise and sensitive detection. miRNA isolated using commercial kits contains abundant interfering RNAs, and the concentration of miRNA may not be adequate for detection. Herein, we prepared a reduced graphene oxide (rGO)-based magnetic solid-phase extraction material for the enrichment and ultrasensitive detection of miRNA from intricate nucleic acid solutions. In situ reverse transcription (RT) was developed as the most efficient approach to desorb miRNA from rGO among the methods that are compatible for the subsequent amplification reported thus far. Additionally, rolling circle amplification and qPCR were used to detect let-7a with a decrease of the limit of detection by 24.7- and 31.3-fold, respectively. This material was also successfully used to extract and detect miRNA from total RNA isolated from human plasma. Our results show that the material prepared in this study has the potential for cancer biopsy in clinics and the discovery of new miRNAs in scientific research.

Nanozyme-based bio-barcode assay for high sensitive and logic-controlled specific detection of multiple DNAs

Since HCV and HIV share a common transmission path, high sensitive detection of HIV and HCV gene is of significant importance to improve diagnosis accuracy and cure rate at early stage for HIV virus-infected patients. In our investigation, a novel nanozyme-based bio-barcode fluorescence amplified assay is successfully developed for simultaneous detection of HIV and HCV DNAs with excellent sensitivity in an enzyme-free and label-free condition. Here, bimetallic nanoparticles, PtAu_NPs, present outstanding peroxidase-like activity and act as barcode to catalyze oxidation of nonfluorescent substrate of amplex red (AR) into fluorescent resorufin generating stable and sensitive "Turn On" fluorescent output signal, which is for the first time to be integrated with bio-barcode strategy for fluorescence detection DNA. Furthermore, the provided strategy presents excellent specificity and can distinguish single-base mismatched mutant from target DNA. What interesting is that cascaded INHIBIT-OR logic gate is integrated with biosensors for the first time to distinguish individual target DNA from each other under logic function control, which presents great application in development of rapid and intelligent detection.

Repressor logic modules assembled by rolling circle amplification platform to construct a set of logic gates

Small molecule metabolites and their allosterically regulated repressors play an important role in many gene expression and metabolic disorder processes. These natural sensors, though valuable as good logic switches, have rarely been employed without transcription machinery in cells. Here, two pairs of repressors, which function in opposite ways, were cloned, purified and used to control DNA replication in rolling circle amplification (RCA) in vitro. By using metabolites and repressors as inputs, RCA signals as outputs, four basic logic modules were constructed successfully. To achieve various logic computations based on these basic modules, we designed series and parallel strategies of circular templates, which can further assemble these repressor modules in an RCA platform to realize twelve two-input Boolean logic gates and a three-input logic gate. The RCA-output and RCA-assembled platform was proved to be easy and flexible for complex logic processes and might have application potential in molecular computing and synthetic biology.

Rapid and ultrasensitive detection of microRNA by target-assisted isothermal exponential amplification coupled with poly (thymine)-templated fluorescent copper nanoparticles

We devised a novel method for rapid and ultrasensitive detection of target microRNA (miRNA) by employing target-assisted isothermal exponential amplification (TAIEA) combined with poly (thymine)-templated fluorescent copper nanoparticles (CuNPs) as signaling probes. The target miRNA hybridizes to the unimolecular template DNA and works as a primer for the extension reaction to form double-stranded product, which consequently generates two nicking endonuclease recognition sites. By simultaneous nicking and displacement reactions, exponential amplification generates many poly (thymine) strands as final products, which are employed for the synthesis of fluorescent CuNPs. Based on the fluorescent signal from CuNPs, target miRNA is detected as low as 0.27 fM around 1 h of total analysis time. The diagnostic capability of this system has been successfully demonstrated by reliably detecting target miRNA from different cell lysates, showing its great potential towards real clinical applications.

Near-Infrared Ag2S Quantum Dots-Based DNA Logic Gate Platform for miRNA Diagnostics

Dysregulation of miRNA expression is correlated with the development and progression of many diseases. These miRNAs are regarded as promising biomarkers. However, it is challenging to measure these low abundant molecules without employing time-consuming radioactive labeling or complex amplification strategies. Here, we present a DNA logic gate platform for miRNA diagnostics with fluorescence outputs from near-infrared (NIR) Ag2S quantum dots (QDs). Carefully designed toehold exchange-mediated strand displacements with different miRNA inputs occur on a solid-state interface, which control QDs release from solid-state interface to solution, responding to multiplex information on initial miRNAs. Excellent fluorescence emission properties of NIR Ag2S QDs certify the great prospect for amplification-free and sensitive miRNA assay. We demonstrate the potential of this platform by achieving femtomolar level miRNA analysis and the versatility of a series of logic circuits computation.

Production of dumbbell probe through hairpin cleavage-ligation and increasing RCA sensitivity and specificity by circle to circle amplification

Dumbbell probe (DP) attracts increasing interests in rolling circle amplification (RCA). A universal DP production method through cleavage-ligation of hairpin was proposed and optimized. The production is characterized by restriction endonuclease (RE)-induced cleavage ends ligation. It has the advantage of phosphorylation-free, splint-free and purification-free. To optimize designing, we found that the position of RE cleavage sequence in the stem and the primer position in the loop affected the formation and amplification of DP obviously. Both sticky and blunt ends cleaved by RE produce DP efficiently. Moreover, we introduced this DP into circle to circle (C2C) RCA based on the same cleavage-ligation principle, and acquired high sensitivity. By combining a two-ligation design and the C2C strategy, specificity for detecting let-7 family members was increased extremely. Furthermore, coreaction of different steps facilitated convenient formation and amplification process of DP.

A reduced graphene oxide-based fluorescence resonance energy transfer sensor for highly sensitive detection of matrix metalloproteinase 2

A novel fluorescence nanoprobe (reduced nano-graphene oxide [nrGO]/fluorescein isothiocyanate-labeled peptide [Pep-FITC]) for ultrasensitive detection of matrix metalloproteinase 2 (MMP2) has been developed by engineering the Pep-FITC comprising the specific MMP2 substrate domain (PLGVR) onto the surface of nrGO particles through non-covalent linkage. The nrGO was obtained by water bathing nano-graphene oxide under 90°C for 4 hours. After mixing the nrGO and Pep-FITC for 30 seconds, the fluorescence from Pep-FITC was almost completely quenched due to the fluorescence resonance energy transfer between fluorescein isothiocyanate (FITC) and nrGO. Upon cleavage of the amide bond between Leu and Gly in the Pep-FITC by protease-MMP2, the FITC bound to nrGO was separated from nrGO surface, disrupting the fluorescence resonance energy transfer process and resulting in fluorescence recovery of FITC. Under optimal conditions, the fluorescence recovery of nrGO/Pep-FITC was found to be directly proportional to the concentration of MMP2 within 0.02–0.1 nM. The detection limit of the nrGO/Pep-FITC was determined to be 3 pM, which is approximately tenfold lower than that of the unreduced carboxylated nano-graphene oxide/Pep-FITC probe.