Incense-burning smoke ingredient Auramine enhances lincRNA-p21 expression for chemosensitization in p53-mutated non-small cell lung cancer

Incense-burning smoke is a deleterious air pollutant that initiates cytotoxic effects by inducing apoptosis in lung epithelial cells and also acts as a risk factor for lung cancers. Auramine, an ingredient of incense smoke, has been implicated in tumor progression and cellular sensitivity in non-small cell lung cancer (NSCLC) towards anti-cancer agents through unclear mechanisms. Tumor protein p53 (TP53)-activated long intergenic non-coding RNA-p21 (lincRNA-p21) undertakes a pivotal role in regulating cell apoptosis and chemosensitivity. TP53 mutations prevalent in 50% of NSCLC, contribute to diminished therapeutic efficacy. However, the influence of auramine on chemotherapy-induced lincRNA-p21 expression and apoptosis in NSCLC with different TP53 genetic statuses remains unexplored. This study disclosed that both wild-type p53 (wtp53) and mutant p53 (mutp53) mediate lincRNA-p21 expression, albeit through distinct promoter enhancers, p53-response element (p53RE) and non-B DNA structure G-quadruplex (GQ), respectively. Intriguingly, auramine functions as an effective stabilizer of the GQ structure, augmenting mutp53-mediated lincRNA-p21 expression and enhancing apoptosis and cellular sensitivity to chemotherapy in mutp53-expressing NSCLC cells. These findings suggest a mechanism by which mutp53, in the presence of auramine, is endowed with tumor-suppressing function akin to wtp53, thereby aiding in combating chemoresistance in NSCLC cells harboring TP53 mutations.

DNA-Templated Modulation in the Photophysical Properties of a Fluorescent Molecular Rotor Auramine O by Varying the DNA Composition

This work delineates an integrative approach combining spectroscopic and computational studies to decipher the association-induced fluorescence properties of a fluorescent molecular rotor, viz., auramine O (AuO), after interacting with 20-mer duplex DNA having diverse well-matched base pairs. While exploring the scarcely explored sequence-dependent interaction mechanism of AuO and DNA, we observed that DNA could act as a conducive scaffold to the formation of AuO dimer through noncovalent interactions at lower molecular density. The photophysical properties of AuO depend on the nucleotide compositions as described from sequence-dependent shifting in the emission and absorption maxima. Furthermore, we explored such DNA base pair-dependent fluorescence spectral characteristics of AuO toward discriminating the thermodynamically most stable single nucleotide mismatch in a 20-mer sequence. Our results are interesting and could be useful in developing analogues with further enhanced emission properties toward mismatched DNA sequences.

Label free detection of auramine O by G-quadruplex-based fluorescent turn-on strategy

Auramine o (AO) is a synthetic dye used in paper and textile industries. Although it has been an unauthorized food additive in many countries due to its toxic and carcinogenic possibility, its illegal uses have been detected in certain food products such as pasta, semolina and spices and also in pharmaceuticals. The presence of AO in food products should be monitored, therefore, to minimize the negative health effects on consumers. In this study, a simple, highly sensitive and selective label free detection method was investigated for AO by G-quadruplex-based fluorescent turn-on strategy. The optimum fluorescent detection assay was achieved with a specific G-quadruplex DNA sequence, c-myc, at 400 nM in Tris-HCl buffer at pH 7.4. The linearity of fluorescence intensity depending on AO concentration ranged from 0 to 0.07 µM and LOD and LOQ were 3 nM and 10 nM, respectively. The G-quadruplex-based detection assay was highly specific for AO as compared to other two synthetic food colorings and successfully applied to determine AO in pasta, bulgur and curry powder with recoveries in the range from 70.33% to 106.49%. This G-quadruplex-based label free detection assay has a significant potential to be used in the detection of AO in food products.

Supramolecular Control on the Optical Properties of a Dye-Polyelectrolyte Assembly

Control of fluorescent molecular assemblies is an exciting area of research with large potential for various important applications, such as, fluorescence sensing/probing, cell imaging and monitoring drug-delivery. In the present contribution, we have demonstrated control on the extent of aggregation of a dye-polyelectrolyte assembly using a macrocyclic host molecule, sulfobutylether-β-cyclodextrin (SBE-β-CD). Initially, a cationic molecular rotor based organic dye, Auramine-O (AuO), undergoes aggregation in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS), and displays a broad intense new emission band along with large variation in its absorption features and excited-state lifetime. A manipulation of the monomer-aggregate equilibrium of the dye-polyelectrolyte assembly has been achieved by introducing a cyclodextrin based supramolecular host, SBE-β-CD, which leads to relocation of AuO molecules from polyelectrolyte (PSS) to supramolecular host cavity, owing to the formation of a host-guest complex between AuO and SBE-β-CD. A reversible control on this manipulation of monomer-aggregate equilibrium is further achieved by introducing a competitive guest for the host cavity i. e., 1-Adamantanol. Thus, we have demonstrated an interesting control on the dye-polyelectrolyte aggregate assembly using a supramolecular host molecule which open up exciting possibilities to construct responsive materials using a repertoire of various host-specific guest molecules.

Characterization of intermolecular G-quadruplex formation over intramolecular G-triplex for DNA containing three G-tracts

G-triplex (G3) has been recognized as a popular intermediate during the folding of G-quadruplex (G4). This has raised interest to anticipate the ultimate formation of G3 by shortening the G4-forming oligonucleotides with the remaining three G-tracts. Some G3 structures have been validated and their stability has been found to be affected by the loop sequences similar to G4s. In this work, however, we first found that an intermolecular parallel G4 structure was preferred in K+ for the oligonucleotide 5'-TGGGTAGGGCGGG-3' (DZ3) containing only three G-tracts. We screened auramine O (AO) as the appropriate fluorophore with a molecular rotor feature to target this G4 structure. AO bound with DZ3 in a 1 : 4 ratio, as confirmed by isothermal titration calorimetry experiments, suggesting the formation of a tetramolecular G4 structure (4erG4). The excimer emission from the labelled pyrene and the DNA melting behavior at various pHs in the presence of Ag+ proved the formation of the 4erG4 structure rather than the prevalent intramolecular G3 folding. This work demonstrates that one should be cautious while putatively predicting a G3 structure from an oligonucleotide containing three G-tracts.

Molecular Rotors as Guest Fluorophores Probing the Local Environment inside Host G4 Supramolecular Hydrogels

Fluorescent molecular rotors with a high binding affinity toward the guanosine quartet (G4) were incorporated as guest fluorophores into host supramolecular hydrogels based on the self-assembly of G4 units, to probe the local environment. Torsional dynamics of the rotors were severely inhibited inside the hydrogels in comparison with aqueous solutions, although the hydrogels were composed of >95% water. Moreover, even though all the gels were rigid bodies with no spontaneous deformation or flow property at room temperature, torsional dynamics in G4 borate gels was found to be consistently several orders of magnitude slower than those in the other G4 gels, irrespective of the identity of the molecular rotor probe. This clear difference in the molecular mobilities of the guest fluorophore could be attributed to systematic differences in the internal structure between the two categories of host G4 hydrogels. In specific terms, the borate groups in G4 borate hydrogels serve as bridging units between separate G4 quadruplex strands, generating additional cross-links that reinforce the network structure of the gel. The results demonstrate that molecular rotors act as efficient fluorescent probes for the quantitative assessment of the molecular-level environment and dynamics inside the hydrogels, an aspect that is missed out by most other analytical methods that are routinely employed for studying them.

Optimal fluorescent-dye staining time for the real-time detection of microbes: a study of Saccharomyces cerevisiae

AIMS

To provide information on the time-dependent behaviour of microbe staining by fluorescent dyes in the order of seconds, which is important in terms of the recent rapid and online techniques for microbe measurements and/or environmental microbe analysis.

METHODS AND RESULTS

For combinations of yeast (Saccharomyces cerevisiae) and typical dyes, including DAPI (4',6-diamidino-2-phenylindole) and Auramine-O, a suspension of yeast cells in ultrapure water was injected into a dye solution in a micro cuvette placed inside a spectrofluorometer and the fluorescence intensity of the resulting solution was measured at 1 s intervals, starting immediately after the mixing and continued until the time for the maximum intensity using various concentrations of yeast and dyes. The relaxation time τ, which corresponds to ~63·2% of the maximum fluorescence intensity, was shown to decrease to below 1 s with increasing DAPI concentration, whereas it remained constant for 2-3 s with increasing Auramine-O concentration, for example at a yeast concentration of 100 µg ml^-1 .

CONCLUSIONS

For the conditions of yeast >10 µg ml^-1 , DAPI >1 µg ml^-1 and Auramine-O >0·1 µg ml^-1 , τ could be adjusted to below 5 s to achieve a rapid and stable staining.

SIGNIFICANCE AND IMPACT OF THE STUDY

Design and operating conditions for rapid and online measurements of microbes can be optimized.

An ultrasensitive electrochemical DNA sensing strategy free from pre-immobilization via G-quadruplex based homogenous proximity hybridization

Motivated by the desire for simple, rapid and highly sensitive DNA detection, we presented a signal-on electrochemical DNA (E-DNA) sensing strategy utilizing cooperative proximity hybridization based on a G-quadruplex (G4) probe labeled with the SH, which could specifically hybridize with its target DNA in homogenous solution. In the presence of target DNA, proximity hybridization was triggered to form a Y-shaped complex and the SH was released from G4 probe stem, companied by chemisorption on the electrode surface through Au-S binding when applied a positive potential, which brought Fc labeled on the signal probe close to the electrode surface. Thus, electrochemical signal dramatically increased, ensuring the highly sensitive "signal-on" assay. Such an E-DNA sensing strategy allows for ultrasensitive DNA detection with a detection limit as low as 2.82 × 10^-15 M and a wide linear response from 1.0 × 10^-9 to 1.0 × 10^-15 M. In addition, the powerful discriminating ability of the mismatched DNA from the perfect matched target DNA was also demonstrated. More importantly, this homogenous proximity hybridization strategy could expand to colorimetric assay by incorporating G4 probe with hemin to form DNAzyme, which could effectively catalyze ABTS to generate a visual color change. Taking the joint advantages of G4 stem-loop probe and homogenous proximity hybridization, this sensing strategy exhibits greatly enhanced sensitivity and excellent specificity, making it a promising strategy for point-of-care testing.

One-step colorimetric detection of an antibody based on protein-induced unfolding of a G-quadruplex switch

A simple colorimetric assay is developed for the sensitive and selective detection of an antibody, which combines a protein binding-induced signaling approach with a novel DNAzyme-based conformational switching strategy.

Novel electrochemical biosensor based on cationic peptide modified hemin/G-quadruples enhanced peroxidase-like activity

This work designed an artificial substrate peptide to synthesize peptide-hemin/G-quadruplex (peptide-DNAzyme) conjugates. In addition to enhancing catalytic activity of hemin/G-quadruplex, the peptide could also be induced and cleaved by prostate specific antigen (PSA). It was the first report on peptide-DNAzyme conjugates in application of the peptide biosensor. The polyethyleneimine-reduced graphene oxide@hollow platinum nanotubes (PEI-rGO@PtNTs) nanocomposites were cast on the glassy carbon electrode in order to form the interface of biocompatibility and huge surface area for bioprobes immobilization. In absence of PSA, the peptide-DNAzyme conjugates retained intact on the surface of the electrode to produce a strong response signal. But in presence of PSA, the peptide-DNAzyme conjugates were destroyed to release electron mediators, resulting in dramatical decrease of the electrochemicl signal. Therefore, the method had high sensitivity and super selectivity with the limit of detection calculated as 2.0 fg/mL. Furthermore, the strategy would be promising to apply for other proteases by transforming the synthetic peptide module of target.

Auramine O, an incense smoke ingredient, promotes lung cancer malignancy

Burning incense to worship deities is a popular religious ritual in large parts of Asia, and is a popular custom affecting more than 1.5 billion adherents. Due to incomplete combustion, burning incense has been well recognized to generate airborne hazards to human health. However, the correlation between burning incense and lung cancer in epidemiological studies remains controversy. Therefore, we speculated that some unknown materials in incense smoke are involved in the initiation or progression of lung cancer. Based on this hypothesis, we identified a major compound auramine O (AuO) from the water-soluble fraction of incense burned condensate using mass spectrometry. AuO is commonly used in incense manufacture as a colorant. Due to thermostable, AuO released from burned incenses becomes an unexpected air pollutant. AuO is classified as a Group 2B chemical by the International Agency of Research on Cancer (IARC), however, the damage of AuO to the respiratory system remains elusive. Our study revealed that AuO has no apparent effect on malignant transformation; but, it dramatically promotes lung cancer malignancy. AuO accumulates in the nucleus and induces the autophagy activity in lung tumor cells. AuO significantly enhances migration and invasive abilities and the in vitro and in vivo stemness features of lung tumor cells through activating the expression of aldehyde dehydrogenase family 1 member A1 (ALDH1A1), and ALDH1A1 knockdown attenuates AuO-induced autophagy activity and blocks AuO-induced lung tumor malignancy. In conclusion, we found that AuO, an ingredient of incense smoke, significantly increases the metastatic abilities and stemness characters of lung tumor cells through the activation of ALDH1A1, which is known to be associated with poor outcome and progression of lung cancer. For public health, reducing or avoiding the use of AuO in incense is recommended.

Label-free and rapid detection of ATP based on structure switching of aptamers

In this work, an aptamer-based fluorescent strategy for label-free detection of ATP was developed by using Thioflavin T (ThT) as a fluorescence indicator, which can specifically bind with G-quadruplex DNAs to generate enhanced fluorescence intensity. In the absence of ATP, the folded structure of ATP aptamer allows the intercalation of ThT to produce strong fluorescence signal. However, upon ATP binding to the aptamer where ThT intercalated, the conformational change or distortion of the aptamer is large enough to cause much less intercalation of ThT and consequently drastic suppression of the fluorescence intensity. As such, the concentration of ATP could be identified very easily by observing fluorescence changes of this sensing system. This label-free assay could be accomplished very easily and quickly with a "mix-and-detect" detection method and exhibits high sensitivity to ATP with a detection limit of 33 nM in a wide range of 0.1-1000 μM. Furthermore, this proposed method is capable of detecting ATP in human serum and cell extracts. This method offers several advantages such as simplicity, rapidity, low cost, good stability and excellent selectivity, which make it hold great potential for the detection of ATP in bioanalytical and biological studies.

Construction of Metal-Ion-Free G-quadruplex-Hemin DNAzyme and Its Application in S1 Nuclease Detection

In this work, a new kind of peroxidase-mimicking DNAzyme (G-quadruplex-hemin DNAzyme, G4-hemin) was constructed by using hemin-modified G-rich DNA (hemin-G-DNA). Experimental results demonstrated that the G-rich DNA can form a G-quadruplex structure by the inducement of terminally modified hemin, rendering the assembly of hemin and G-quadruplex structure spontaneously and efficiently. As a result, G-hemin revealed higher peroxidase activity than traditional G-quadruplex/hemin DNAzyme (G4/hemin). Besides, different from G4/hemin, G4-hemin was constructed in one step without the participation of metal ions and adscititious hemin. Accordingly, the construction procedure was significantly simplified and the background signal from dissociative hemin was remarkably reduced. In a proof-of-concept trial, according to the colorimetric signals of G4-hemin, a novel biosensor for the detection of S1 nuclease activity was established, which provides a novel perspective for designing peroxidase-mimicking DNAzyme-based biosensors.

A luminescent G-quadruplex-selective iridium(iii) complex for the label-free detection of lysozyme

A novel Ir(iii) complex 1 displays high selectivity for the G-quadruplex, and was used to establish a label-free G-quadruplex-based detection platform for lysozyme in buffer.

A single quantum dot-based biosensor for DNA point mutation assay

We develop a single quantum dot-based biosensor for sensitive and selective detection of DNA point mutation.