Bromomethyllithium-mediated chemoselective homologation of disulfides to dithioacetals

Hydrogen Bond-Mediated Transition Metal-Free Alcoholysis of Primary Amides to Access Esters

An efficient hydrogen bond-mediated alcoholysis of primary amides was disclosed using diethyl phosphonate (DEP) as a catalyst. In this process, a wide range of primary amides and alcohols were tested and smoothly transformed to corresponding esters in moderate to good yields. This novel strategy features transition metal-free, broad substrate scope and a hydrogen bond-mediated one-pot pathway. In addition, the reaction showed a highly chemoselective o/alcoholic o-acylation of mercapto/phenolic alcohols.

Synthesis of dithioacetals via nucleophilic substitution and their antifungal activity evaluation

A novel dual nucleophilic substitution reaction of dichloromethane with thiols has been developed, which affords dithioacetals in up to 96% yields. This dual substitution reaction with two different nucleophiles is also successfully developed with α-acyloxy sulfides as the product. In addition, in vitro antifungal activity tests against L. theobromae disclose that these α-acyloxy sulfides exhibit excellent antifungal activity with an inhibition rate up to 100 ± 0%. This reaction provides efficient access to potential bioactive dithioacetals from readily available starting materials.

Facile and efficient transformation of thiols to disulfides via a radical pathway with N-anomeric amide

Radical coupling of thiols is an attractive route for the synthesis of disulfides, but this approach should be promoted by strong oxidants and/or metal salts in combination with additives, which limits its substrate scope and application. In this work, the N-anomeric amide was first found to be able to realize the conversion of thiols to sulfur radicals with high efficiency in the absence of an oxidant or any additives for the synthesis of symmetrical disulfides. The protocol features mild reaction conditions, good functional group tolerance, and moderate to excellent yields.

Base-mediated homologative rearrangement of nitrogen-oxygen bonds of N-methyl-N-oxyamides

Due to the well known reactivity of C(O)-N functionalities towards canonical C1-homologating agents (e.g. carbenoids, diazomethane, ylides), resulting in the extrusion of the N-centered fragment en route to carbonyl compounds, formal C1-insertions within N-O bonds still remain obscure. Herein, we document the homologative transformation of N-methyl-N-oxyamides - with high tolerance for diverse O-substituents - into N-acyl-N,O-acetals. Under controlled basic conditions, the N-methyl group of the same starting materials acts as a competent precursor of the methylene synthon required for the homologation. The logic is levered on the formation of an electrophilic iminium ion (via N-O heterolysis) susceptible to nucleophilic attack by the alkoxide previously expulsed. The procedure documents genuine chemocontrol and flexibility, as judged by the diversity of substituents placed on both amide and nitrogen linchpins. The mechanistic rationale was validated through experiments conducted on D-labeled materials which unambiguously attributed the origin of the methylene fragment to the N-methyl group of the starting compounds.

Highly chemoselective homologative assembly of the α-substituted methylsulfinamide motif from N-sulfinylamines

α-Substituted methylsulfinamide are prepared through the homologation of electrophilic N-sulfinylamines with Li-CHXY reagents. The transformation takes place under full chemocontrol and exhibits good flexibility for preparing both N-aryl and N-alkyl analogues. Various sensitive functionalities can be accommodated on the starting materials, thus documenting a wide reaction scope.

Synthesis of pyrrole disulfides via umpolung of β-ketothioamides

A Na₂CO₃-promoted reaction of β-ketothioamides (KTAs) and cyanoacetates was developed for the synthesis of pyrrole disulfides using air as a green oxidant. This protocol features a broad substrate scope and mild reaction conditions. Preliminary mechanistic studies indicate that the reaction involves a tandem unusual umpolung of KTAs, N-cyclization, tautomerization and oxidative coupling process.

Consecutive and Selective Double Methylene Insertion of Lithium Carbenoids to Isothiocyanates: A Direct Assembly of Four-Membered Sulfur-Containing Cycles

A formal CH2 -CH2 homologation conducted with C1 carbenoids on a carbon electrophile for the obtainment of a four-membered cycle is reported. The logic proposes the consecutive delivery of two single nucleophilic CH2 units to an isothiocyanate-as competent electrophilic partner-resulting in the assembling of a rare imino-thietane cluster. The single synthetic operation procedure documents genuine chemocontrol, as indicated by the tolerance to various reactive elements decorating the starting materials. Significantly, the double homologation protocol is accomplished directly on a carbon electrophile, thus not requiring the installation of heteroatom-centered manifolds (e.g. boron).

Aza-Matteson Reactions via Controlled Mono- and Double-Methylene Insertions into Nitrogen-Boron Bonds

Boron-homologation reactions represent an efficient and programmable approach to prepare alkylboronates, which are valuable and versatile synthetic intermediates. The typical boron-homologation reaction, also known as the Matteson reaction, involves formal carbenoid insertions into C-B bonds. Here we report the development of aza-Matteson reactions via carbenoid insertions into the N-B bonds of aminoboranes. By changing the leaving groups of the carbenoids and altering Lewis acid activators, selective mono- and double-methylene insertions can be realized to access various α- and β-boron-substituted tertiary amines, respectively, from common secondary amines. The derivatization of complex amine-containing bioactive molecules, diverse functionalization of the boronate products, and sequential insertions of different carbenoids have also been achieved.

Direct and straightforward transfer of C1 functionalized synthons to phosphorous electrophiles for accessing gem-P-containing methanes

The direct transfer of different α-substituted methyllithium reagents to chlorinated phosphorous electrophiles of diverse oxidation state (phosphates, phosphine oxides and phosphines) is proposed as an effective strategy to synthesize geminal P-containing methanes. The methodology relies on the efficient nucleophilic substitution conducted on the P-chlorine linkage. Uniformly high yields are observed regardless the specific nature of the carbanion employed: once established the conditions for generating the competent nucleophile (LiCH₂Hal, LiCHHal₂, LiCH₂CN, LiCH₂SeR etc.) the homologated compounds are obtained via a single operation. Some P-containing formal carbanions have been evaluated in transferring processes, including the carbonyl-difluoromethylation of the opioid agent Hydrocodone.

Chemoselective Homologation-Deoxygenation Strategy Enabling the Direct Conversion of Carbonyls into (n+1)-Halomethyl-Alkanes

The sequential installation of a carbenoid and a hydride into a carbonyl, furnishing halomethyl alkyl derivatives, is reported. Despite the employment of carbenoids as nucleophiles in reactions with carbon-centered electrophiles, sp³-type alkyl halides remain elusive materials for selective one-carbon homologations. Our tactic levers on using carbonyls as starting materials and enables uniformly high yields and chemocontrol. The tactic is flexible and is not limited to carbenoids. Also, diverse carbanion-like species can act as nucleophiles, thus making it of general applicability.

Carbenoid-Mediated Homologation Tactics for Assembling (Fluorinated) Epoxides and Aziridines

Homologation strategies provide highly versatile tools in organic synthesis for the introduction of a CH2 group into a given carbon skeleton. The operation can result in diverse structural motifs by tuning of the reaction conditions and the nature of the homologating agent. In this Account, concisely contextualizing our work with lithium carbenoids (LiCH2X, LiCHXY etc) for homologating carbon-centered electrophiles, we focus on the assembly of three-membered cycles featuring fluorinated substituents. Two illustrative case studies are considered: (1) the development and employment of fluorinated carbenoids en route to rare α-fluoroepoxides and aziridines, and (2) the installation of up to halomethylenic groups on trifluoroimidoylacetyl chlorides (TFAICs) for preparing CF3-containing halo- and halomethylaziridines. Collectively, we demonstrate that the initial homologation event generated by the installation of the carbenoid, upon modulation of the conditions, serves as a tool for creating fluorinated building blocks in a single operation.

Sc(OTf)3-Catalyzed Synthesis of Symmetrical Dithioacetals and Bisarylmethanes Using Nitromethane as a Methylene Source

Use of nitromethane as an electrophilic methylene source for the synthesis of symmetrical dithioacetals and bisarylmethanes has been showcased using Sc(OTf)₃ as a catalyst. The procedure allows straightforward access to the densely functionalized dithioacetals and bisarylmethanes under mild conditions. Additionally, the method has been applied for the synthesis of antimalarial tetramethyl mellotojaponin C and anticancer dimeric phloroglucinol derivative.

Straightforward chemoselective access to unsymmetrical dithioacetals through a thiosulfonate homologation-nucleophilic substitution sequence

A two-step electrophilic sulfur homologation strategy for building up unsymmetrical dithioacetals.

The synthetic versatility of the Tiffeneau–Demjanov chemistry in homologation tactics

Abstract

The Tiffeneau–Demjanov rearrangement can be regarded as an interesting alternative to the more common semi-pinacol transposition. It is usually employed for ring extension but, under specific conditions, it can also be used for ring contraction. Compared to other techniques, such as the Demjanov rearrangement or homologations with diazo compounds, the Tiffeneau–Demjanov pathway presents attractive features including high yielding and selective processes. Ring enlargements follow very strict and simple rules, such as the movement of the less substituted carbon and retention of the configuration. The rearrangement process is mainly affected by steric factors, due to presence of neighbouring groups, rather than electronic ones. The ring contraction may be achieved positioning the amine within the ring, thus achieving a high level of control. Unfortunately, applications of the reaction in modern homologation chemistry are rare; therefore, the aim of the review is re-proposing to the synthetic community the versatility of this venerable reaction and thus, spurring its employment for tackling challenging homologations processes.

Graphic abstract

A Combination of Pharmacophore and Docking-based Virtual Screening to Discover new Tyrosinase Inhibitors

Melanogenesis controls the formation of melanin pigment whose overproduction is related to various hyperpigmentary disorders in humans. Tyrosinase is a type-3 copper enzyme involved in the rate limiting step of melanin synthesis, therefore its inhibition could represent an efficient way for the development of depigmenting agents. In this work, a combination of pharmacophore and docking-based studies has been employed to screen two in-house 3D compound databases containing about 2,000 molecules from natural and synthetic sources. As result we selected two "hit compounds" which proved to inhibit tyrosinase activity showing IC₅₀ values in the micromolar range.

Sustainable Asymmetric Organolithium Chemistry: Enantio- and Chemoselective Acylations through Recycling of Solvent, Sparteine, and Weinreb "Amine"

The well-established Hoppe-Beak chemistry, which involves enantioselective generation of organolithium compounds in the presence of (-)-sparteine, was revisited and applied to unprecedented acylations with Weinreb amides to access highly enantioenriched α-oxyketones and cyclic α-aminoketones. Recycling of the sustainable solvent cyclopentyl methyl ether, sparteine, and the released Weinreb "amine" [HNMe(OMe)] was possible through a simple work-up procedure that enabled full recovery of these precious materials. The methodology features a robust scope and flexibility, thus allowing the enantioselective preparation of scaffolds amenable of further derivatization.

Cs2CO3-promoted methylene insertion into disulfide bonds using acetone as a methylene source

An efficient halogen-free Cs2CO3-promoted methylene insertion into disulfide bonds has been achieved using acetone as a methylene source under mild conditions. This method provides a convenient and practical route to dithioacetals in up to 96% yield with good functional group compatibility.

Modular and Chemoselective Strategy for the Direct Access to α-Fluoroepoxides and Aziridines via the Addition of Fluoroiodomethyllithium to Carbonyl-Like Compounds

An expeditious, high-yielding synthesis of rare α-fluoroepoxides and α-fluoroaziridines through the addition of the unkown fluoroiodomethyllithium (LiCHIF)-formed via deprotonation the commercially available fluoroiodomethane with a lithium amide base-to carbonyl-like compounds is documented. The ring-closure reactions, leading to α-fluorinated three-membered heterocycles, rely on the diversely reactive C-I and C-F bonds. Excellent chemoselectivity was observed in the presence of highly sensitive functionalities-aldehyde, ketone, nitrile, alkene-which remained untouched during the homologation sequence.

Homologation chemistry with nucleophilic α-substituted organometallic reagents: chemocontrol, new concepts and (solved) challenges

The transfer of a reactive nucleophilic CH2X unit into a preformed bond enables the introduction of a fragment featuring the exact and desired degree of functionalization through a single synthetic operation. The instability of metallated α-organometallic species often poses serious questions regarding the practicability of using this conceptually intuitive and simple approach for forming C-C or C-heteroatom bonds. A deep understanding of processes regulating the formation of these nucleophiles is a precious source of inspiration not only for successfully applying theoretically feasible transformations (i.e. determining how to employ a given reagent), but also for designing new reactions which ultimately lead to the introduction of molecular complexity via short experimental sequences.

A practical guide for using lithium halocarbenoids in homologation reactions

ABSTRACT

Lithium halocarbenoids are versatile reagents for accomplishing homologation processes. The fast α-elimination they suffer has been considered an important limitation for their extensive use. Herein, we present a series of practical considerations for an effective employment in the homologation of selected carbon electrophiles.

GRAPHICAL ABSTRACT

Isocyanates and isothiocyanates as versatile platforms for accessing (thio)amide-type compounds

The addition of carbon (Grignard and organolithium reagents) and hydride nucleophiles (Schwartz reagent) to isocyanates and isothiocyanates constitutes a versatile, direct and high yielding approach to the synthesis of functionalized (thio)amide derivatives including haloamides and formamides. The chemoselective delivery of a nucleophilic (eventually configurationally stable) organometallic species to a given iso(thio)cyanate is the crucial parameter for the success of the strategy. Thus, the influence of the factors governing classical methodologies (e.g. dehydrative condensation) such as steric hindrance and electronic properties of the reactants become practically negligible.

Homologation of halostannanes with carbenoids: a convenient and straightforward one-step access to α-functionalized organotin reagents

A direct, single synthetic homologative transformation of halostannanes into mono- or di-substituted methyl analogues is documented.

Efficient Access to All-Carbon Quaternary and Tertiary α-Functionalized Homoallyl-type Aldehydes from Ketones

β,γ-Unsaturated aldehydes with all-carbon quaternary or tertiary α-centers were rapidly assembled from ketones through a unique synthetic operation consisting of 1) C₁ homologation, 2) Lewis acid mediated epoxide-aldehyde isomerization, and 3) electrophilic trapping. The synthetic equivalence of a vinyl oxirane and a β,γ-unsaturated aldehyde is the key concept of this previously undisclosed tactic. Mechanistic studies and labeling experiments suggest that an aldehyde enolate is a crucial intermediate. The homologating carbenoid formation plays a critical role in determining the chemoselectivity.

Alkali Metal Chlorine and Bromine Carbenoids: Their Thermal Stability and Structural Properties

The synthesis and structures of a series of M/X carbenoids of the type [Ph₂ P(S)]₂ CMX with M=Li, Na, and K and X=Cl and Br are reported, amongst the first isolated Na/Br and K/Br carbenoids. NMR spectroscopic as well as crystallographic studies showed distinct differences between the lithium carbenoids and their heavier congeners. In the solid state, all carbenoids showed no direct metal-carbon interaction, but an interaction between the metal and the halogen atom. This contact is only very weak in the case of the Li/Br carbenoid, but much more pronounced in the corresponding potassium and sodium compounds. Nevertheless, these interactions did not significantly influence the stability of the carbenoids by weakening the C-X bond and facilitating the MX elimination. As such all compounds were found to be stable up to approximately 60 °C in solution. Hence, M-X interactions-albeit being an essential feature for the structure formation of carbenoids-are not the only criterion determining the stability of such compounds. In the present systems, the stabilization by the thiophosphinoyl moieties is more important than the metal/halogen combination.

Taming Metal/Fluorine Carbenoids

Although Li/Cl carbenoids are versatile reagents in organic synthesis, the controlled handling of the extremely reactive and labile M/F carbenoids remains a challenge. We now show that even these compounds can be stabilized and isolated in solid state, as well as in solution. Particularly the sodium and potassium compounds exhibit a remarkable stability, thus allowing the first isolation of a room-temperature-stable fluorine carbenoid. Spectroscopic, as well as DFT studies confirmed the pronounced carbenoid character, showing M-F-C interactions with elongated C-F bonds. The different stabilities of the carbenoids was found to originate from the different strength of the M-F interaction. Hence, the lithium compounds are considerably more reactive than their heavier congeners. Reactivity studies showed that the nature of the metal also influences the reactivity, resulting in different selectivity in the addition to thioketones.

Evidence and isolation of tetrahedral intermediates formed upon the addition of lithium carbenoids to Weinreb amides and N-acylpyrroles

Trapping tetrahedral intermediates from Weinreb amides andN-acylpyrroles.

Recent advancements on the use of 2-methyltetrahydrofuran in organometallic chemistry

ABSTRACT

Since the introduction of 2-methyltetrahydrofuran as an useful alternative to the classical tetrahydrofuran, there has been a continuous interest in the synthetic community operating at academic and industrial towards it. In particular, the much higher stability that basic organometallic reagents display in 2-methyltetrahydrofuran makes it suitable for processes involving such sensitive species including asymmetric transformations. The easy formation of an azeotropic mixture with water, the substantial immiscibility with water, and the fact it derives from natural sources (corncobs or bagasse), allow to consider it in agreement with the Anastas' Geen Chemistry principles. In this minireview, selected examples of its employment in organometallic transformations ranging from carbanions to radical and transition metal-catalyzed processes are provided.

GRAPHICAL ABSTRACT

Stability and reactivity control of carbenoids: recent advances and perspectives

Metal carbenoids such as lithium or Simmons-Smith-type reagents are widely used in organic synthesis, particularly in cyclopropanation and homologation reactions. These reagents are often highly reactive and thermally labile, thus limiting their isolation and hampering the development of new synthetic applications. Recent years however, have shown that by means of systematic stabilization a control of reactivity and the development of new applications is possible. This feature article documents recent developments in the control of carbenoid reactivity and stability and highlights structural and electronic properties as well as applications in main group element and transition metal chemistry.

Lithium Halomethylcarbenoids: Preparation and Use in the Homologation of Carbon Electrophiles

α-Halomethyllithium carbenoids are useful homologating reagents which - reacting under proper reaction conditions as carbanions - enable the installation via nucleophilic addition of a reactive halomethyl fragment onto a preformed carbon-heteroatom bond. The pronounced thermolability represented - since seminal studies by Köbrich - the Achilles' heel of these reagents: the use of Barbier-type methodologies (i.e., the electrophile should be present in the reaction mixture prior to the formation of the carbenoid) was pivotal in order to suppress decomposition through α-elimination processes. Nowadays, the use of low temperatures (-78 °C) guarantees reliable procedures and, significantly, the employment of microreactor technologies allows external trapping to be performed even at higher temperatures as reported by Luisi. We will discuss the α-halomethyllithium-mediated homologations of a series of carbon electrophiles such as carbonyl compounds, imines, esters, Weinreb amides, and isocyanates.

Highly efficient synthesis of functionalized α-oxyketones via Weinreb amides homologation with α-oxygenated organolithiums

An efficient, chemoselective homologation of Weinreb amides to the corresponding variously substituted α-oxyketones has been developed via the addition of lithiated α-oxygenated species. This one-step, experimentally easy, high yielding protocol is amenable not only for accessing simple α-oxyketones but also for more complex substituted ones ranging from primary and secondary alkyl-type to aromatic ones. Full delivery of the stereochemical information contained in the starting materials is observed through both the employment of enantioenriched Weinreb amides and optically active organolithium species.

Chemoselective Schwartz Reagent Mediated Reduction of Isocyanates to Formamides

Addition of the in situ generated Schwartz reagent to widely available isocyanates constitutes a chemoselective, high-yielding, and versatile approach to the synthesis of variously functionalized formamides. Steric and electronic factors or the presence of sensitive functionalities (esters, nitro groups, nitriles, alkenes) do not compromise the potential of the method. Full preservation of the stereochemical information contained in the starting materials is observed. The use of formamides in the nucleophilic addition of organometallic reagents (Chida-Sato allylation, Charette-Huang addition to imidoyl triflate activated amides, Matteson homologation of boronic esters) is briefly investigated.