Taming hazardous chemistry by continuous flow technology

Flow-based bioconjugation of coumarin phosphatidylethanolamine probes: Optimised synthesis and membrane molecular dynamics studies

A series of phosphatidylethanolamine fluorescent probes head-labelled with 3-carboxycoumarin was prepared by an improved bioconjugation approach through continuous flow synthesis. The established procedure, supported by a design of experiment (DoE) set-up, resulted in a significant reduction in the reaction time compared to the conventional batch method, in addition to a minor yield increase. The characterization of these probes was enhanced by an in-depth molecular dynamics (MD) study of the behaviour of a representative probe of this family, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine labelled with 3-carboxycoumarin (POPE-COUM), in bilayers of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/1-stearoyl-2-linoleoyl-sn-glycero-3-phosphocholine (SLPC) 2:1, mimicking the composition of the egg yolk lecithin membranes recently used experimentally by our group to study POPE-COUM as a biomarker of the oxidation state and integrity of large unilamellar vesicles (LUVs). The MD simulations revealed that the coumarin group is oriented towards the bilayer interior, leading to a relatively internal location, in agreement with what is observed in the nitrobenzoxadiazole fluorophore of commercial head-labelled NBD-PE probes. This behaviour is consistent with the previously stated hypothesis that POPE-COUM is entirely located within the LUVs structure. Hence, the delay on the oxidation of the probe in the oxygen radical absorbance capacity (ORAC) assays performed is related with the inaccessibility of the probe until alteration of the LUV structure occurs. Furthermore, our simulations show that POPE-COUM exerts very little global and local perturbation on the host bilayer, as evaluated by key properties of the unlabelled lipids. Together, our findings establish PE-COUM as suitable fluorescent lipid analogue probes.

Cyclopropanation of Alkenes with Halodiazirines as Halocarbene Precursors in Continuous Flow

The cyclopropanation reaction of alkenes with photolytically-generated chlorocarbenes from chlorodiazirines is reported as an effective way to prepare substituted 3-chloro-3-aryl-cyclopropanes. This practical and efficient approach allows the synthesis of various 3-chloro-3-aryl-cyclopropanes (32 examples) in continuous flow in 5-minute residence time under light-emitting diode (LED) irradiation. The conditions using 380 nm LED irradiation were successfully extended to the synthesis of substituted 3-bromo-3-aryl-cyclopropanes (3 examples).

Continuous Flow Oxidation of Alcohols Using TEMPO/NaOCl for the Selective and Scalable Synthesis of Aldehydes

A simple and benign continuous flow oxidation protocol for the selective conversion of primary and secondary alcohols into their respective aldehyde and ketone products is reported. This approach makes use of catalytic amounts of TEMPO in combination with sodium bromide and sodium hypochlorite in a biphasic solvent system. A variety of substrates are tolerated including those containing heterocycles based on potentially sensitive nitrogen and sulfur moieties. The flow approach can be coupled with inline reactive extraction by formation of the carbonyl-bisulfite adduct which aids in separation of remaining substrate or other impurities. Process robustness is evaluated for the preparation of phenylpropanal at decagram scale, a trifluoromethylated oxazole building block as well as a late-stage intermediate for the anti-HIV drug maraviroc which demonstrates the potential value of this continuous oxidation method.

In Situ Performance Monitoring of Electrochemical Oxygen and Hydrogen Peroxide Sensors in an Additively Manufactured Modular Microreactor

Miniaturized and microstructured reactors in process engineering are essential for a more decentralized, flexible, sustainable, and resilient chemical production. Modern, additive manufacturing methods for metals enable complex reactor-geometries, increased functionality, and faster design iterations, a clear advantage over classical subtractive machining and polymer-based approaches. Integrated microsensors allow online, in situ process monitoring to optimize processes like the direct synthesis of hydrogen peroxide. We developed a modular tube-in-tube membrane reactor fabricated from stainless steel via 3D printing by laser powder bed fusion of metals (PBF-LB/M). The reactor concept enables the spatially separated dosage and resaturation of two gaseous reactants across a membrane into a liquid process medium. Uniquely, we integrated platinum-based electrochemical sensors for the online detection of analytes to reveal the dynamics inside the reactor. An advanced chronoamperometric protocol combined the simultaneous concentration measurement of hydrogen peroxide and oxygen with monitoring of the sensor performance and self-calibration in long-term use. We demonstrated the highly linear and sensitive monitoring of hydrogen peroxide and dissolved oxygen entering the liquid phase through the membrane. Our measurements delivered important real-time insights into the dynamics of the concentrations in the reactor, highlighting the power of electrochemical sensors applied in process engineering. We demonstrated the stable continuous measurement over 1 week and estimated the sensor lifetime for months in the acidic process medium. Our approach combines electrochemical sensors for process monitoring with advanced, additively manufactured stainless steel membrane microreactors, supporting the power of sensor-equipped microreactors as contributors to the paradigm change in process engineering and toward a greener chemistry.

Advances in the Continuous Flow Synthesis of 3- and 4-Membered Ring Systems

Small carbo- and heterocyclic ring systems have experienced a significant increase in importance in recent years due to their relevance in modern pharmaceuticals, as building blocks for designer materials or as synthetic intermediates. This necessitated the development of new synthetic methods for the preparation of these strained ring systems focusing on effectiveness and scalability. The high ring strain of these entities as well as the use of high-energy reagents and intermediates has often challenged their synthesis. Continuous flow approaches have thus emerged as highly effective means to safely and reliably access these strained scaffolds. In this short review, key developments in this field are summarised showcasing the power of continuous flow approaches for accessing 3- and 4-membered ring systems via thermal, photo- and electrochemical processes.

Recent Advancements in the Utilization of s-Block Organometallic Reagents in Organic Synthesis with Sustainable Solvents

This mini-review offers a comprehensive overview of the advancements made over the last three years in utilizing highly polar s-block organometallic reagents (specifically, RLi, RNa and RMgX compounds) in organic synthesis run under bench-type reaction conditions. These conditions involve exposure to air/moisture and are carried out at room temperature, with the use of sustainable solvents as reaction media. In the examples provided, the adoption of Deep Eutectic Solvents (DESs) or even water as non-conventional and protic reaction media has not only replicated the traditional chemistry of these organometallic reagents in conventional and toxic volatile organic compounds under Schlenk-type reaction conditions (typically involving low temperatures of -78 °C to 0 °C and a protective atmosphere of N2 or Ar), but has also resulted in higher conversions and selectivities within remarkably short reaction times (measured in s/min). Furthermore, the application of the aforementioned polar organometallics under bench-type reaction conditions (at room temperature/under air) has been extended to other environmentally responsible reaction media, such as more sustainable ethereal solvents (e.g., CPME or 2-MeTHF). Notably, this innovative approach contributes to enhancing the overall sustainability of s-block-metal-mediated organic processes, thereby aligning with several key principles of Green Chemistry.

Preparation of Sulfonyl Chlorides by Oxidative Chlorination of Thiols and Disulfides using HNO3/HCl/O2 in a Flow Reactor

A continuous flow metal-free protocol for the synthesis of sulfonyl chlorides from thiols and disulfides in the presence of nitric acid, hydrochloric acid and oxygen was developed. The influence of the reaction parameters was investigated under batch and flow conditions. Online 19F NMR was successfully implemented to investigate different reaction conditions within a single experiment. The sulfonyl chlorides were isolated (mostly in 70-81 % yield) after performing a simple aqueous washing procedure. In particular, the protocol was successfully operated for >6 hours to convert diphenyl disulfide to its corresponding sulfonyl chloride, achieving a throughput of 3.7 g h-1. The environmental impact of the protocol was assessed and compared to an existing continuous flow protocol using 1,3-dichloro-5,5-dimethylhydantoin (DCH) as reagent. The process mass intensity (PMI) for the newly-developed flow protocol (15) compared favorably to the DCH flow process (20).

Multiphasic Continuous-Flow Reactors for Handling Gaseous Reagents in Organic Synthesis: Enhancing Efficiency and Safety in Chemical Processes

The use of reactive gaseous reagents for the production of active pharmaceutical ingredients (APIs) remains a scientific challenge due to safety and efficiency limitations. The implementation of continuous-flow reactors has resulted in rapid development of gas-handling technology because of several advantages such as increased interfacial area, improved mass- and heat transfer, and seamless scale-up. This technology enables shorter and more atom-economic synthesis routes for the production of pharmaceutical compounds. Herein, we provide an overview of literature from 2016 onwards in the development of gas-handling continuous-flow technology as well as the use of gases in functionalization of APIs.

Solar-Driven Continuous CO2 Reduction to CO and CH4 using Heterogeneous Photothermal Catalysts: Recent Progress and Remaining Challenges

The urgent need to reduce the carbon dioxide level in the atmosphere and keep the effects of climate change manageable has brought the concept of carbon capture and utilization to the forefront of scientific research. Amongst the promising pathways for this conversion, sunlight-powered photothermal processes, synergistically using both thermal and non-thermal effects of light, have gained significant attention. Research in this field focuses both on the development of catalysts and continuous-flow photoreactors, which offer significant advantages over batch reactors, particularly for scale-up. Here, we focus on sunlight-driven photothermal conversion of CO2 to chemical feedstock CO and CH4 as synthetic fuel. This review provides an overview of the recent progress in the development of photothermal catalysts and continuous-flow photoreactors and outlines the remaining challenges in these areas. Furthermore, it provides insight in additional components required to complete photothermal reaction systems for continuous production (e. g., solar concentrators, sensors and artificial light sources). In addition, our review emphasizes the necessity of integrated collaboration between different research areas, like chemistry, material science, chemical engineering, and optics, to establish optimized systems and reach the full potential of this technology.

Efficient construction of a β-naphthol library under continuous flow conditions

A β-naphthol library has been efficiently constructed utilizing a mild continuous flow procedure, relying on a tandem Friedel-Crafts reaction and starting from readily available arylacetyl chloride and alkynes. Multiple functionalized β-naphthols can be acquired within 160 s in generally high yields (up to 83%). Using an electron-rich phenylacetyl chloride derivative (4-OH- or 4-MeO-) provides spirofused triene dione as the primary product. A scale-up preparation affords a throughput of 4.70 g h-1, indicating potential large-scale application. Herein, we present a rapid, reliable, and scalable method to obtain various β-naphthols in the compound library.

Continuous Flow Synthesis of Nitrosoarenes via Photochemical Rearrangement of Aryl Imines

Nitrosoarenes are versatile organic building blocks; however, their intrinsic instability and limited synthetic accessibility have so far restricted their widespread use. Herein, we present a new continuous flow route toward these entities that is based on a direct photochemical rearrangement process using o-nitrophenylimines as starting materials. Due to the underlying redox mechanism, a new amide group accompanies the formation of the nitroso group. Crucial to the success of this approach is the use of trifluoroethanol as a solvent and high-power light-emitting diodes (365 nm) as light sources that provide uniform irradiation and high efficiency of the resulting continuous flow method. The process is fast and robust, with high functional group tolerance and high throughput. The formation of the nitroso moiety is supported by full spectroscopic analysis, including X-ray crystallography. The scalability of this flow approach allows access to gram quantities of nitroso species for which we highlight a small set of derivatization reactions underlining their synthetic utility.

Highly Scalable and Inherently Safer Preparation of Di, Tri and Tetra Nitrate Esters Using Continuous Flow Chemistry

Nitrate esters are important organic compounds having wide application in energetic materials, medicines and fuel additives. They are synthesized through nitration of aliphatic polyols. But the process safety challenges associated with nitration reaction makes the production process complicated and economically unviable. Herein, we have developed a continuous flow process wherein polyol and nitric acid are reacted in a microreactor to produce nitrate ester continuously. Our developed process is inherently safer and efficient. The process was optimized for industrially important nitrate esters containing two, three and four nitro groups. Substrates include glycol dinitrates: 1,2-propylene glycol dinitrate (PGDN), ethylene glycol dinitrate (EGDN), diethylene glycol dinitrate (DEGDN), triethylene glycol dinitrate (TEGDN); trinitrates: trimethylolethane trinitrate (TMETN), 1,2,4-butanetriol trinitrate (BTTN); and tetranitrates: erythritol tetranitrate (ETN). The optimized process for each molecule provided yield >90 % in a short residence time of 1 min corresponding to a space time yield of >18 g/h/mL of reactor volume.

A high activity mesoporous Pt@KIT-6 nanocomposite for selective hydrogenation of halogenated nitroarenes in a continuous-flow microreactor

In this study, we designed a Pt@KIT-6 nanocomposite prepared by impregnating platinum nanoparticles on the nanopores of the KIT-6 mesoporous material. This Pt@KIT-6 nanocomposite was used as a catalyst in a micro fixed bed reactor (MFBR) for the continuous-flow hydrogenation of halogenated nitroarenes, which demonstrates three advantages. First, the Pt@KIT-6 nanocomposite has a stable mesoporous nanostructure, which effectively enhances the active site and hydrogen adsorption capacity. The uniformly distributed pore structure and large specific surface area were confirmed by electron microscopy and N2 physisorption, respectively. In addition, the aggregation of the loaded metal was avoided, which facilitated the maintenance of high activity and selectivity. The conversion and selectivity reached 99% within 5.0 minutes at room temperature (20 °C). Furthermore, the continuous-flow microreactor allows precise control and timely transfer of the reaction system, reducing the impact of haloid acids. The activity and selectivity of the Pt@KIT-6 nanocomposite showed virtually no degradation after 24 hours of continuous operation of the entire continuous-flow system. Overall, the Pt@KIT-6 nanocomposite showed good catalysis for the hydrogenation of halogenated nitroarenes in the continuous-flow microreactor. This work provides insights into the rational design of a highly active and selective catalyst for selective hydrogenation systems.

Process Development of Heterogeneous Rh Catalyzed Carbene Transfer Reactions Under Continuous Flow Conditions

A very simple Rh-based catalyst operates under heterogeneous flow conditions for the carbene transfer of methyl diazoacetate (MDA) with several substrates. Two different methods for heterogenizing the catalyst in a column reactor have been applied. Different X-H (X=O, S, Si, CH2 ) were successfully functionalized by the carbene and cyclopropenation was performed under very mild continuous flow conditions. Following these promising results, catalyst recycling experiments using both methodologies were conducted in which up to 5 catalytic cycles have been achieved for the carbene O-H insertion reaction and interestingly, a sequential transformation of different substrates with up to 10 consecutive runs per reactor were achieved with no loss in the catalytic activity, thus allowing the production of families of compounds.

Current State of Microflow Trifluoromethylation Reactions

The trifluoromethyl group is a powerful structural motif in drugs and polymers; thus, developing trifluoromethylation reactions is an important area of research in organic chemistry. Over the past few decades, significant progress has been made in developing new methods for the trifluoromethylation of organic molecules, ranging from nucleophilic and electrophilic approaches to transition-metal catalysis, photocatalysis, and electrolytic reactions. While these reactions were initially developed in batch systems, more recent microflow versions are highly attractive for industrial applications owing to their scalability, safety, and time efficiency. In this review, we discuss the current state of microflow trifluoromethylation. Approaches for microflow trifluoromethylation based on different trifluoromethylation reagents are described, including continuous flow, flow photochemical, microfluidic electrochemical reactions, and large-scale microflow reactions.

Photocatalyzed (3+2) Cycloaddition for the Dearomatization of Electron-Poor Arenes under Flow Conditions

The photocatalyzed dearomative reaction between various electron-deficient aromatic compounds and a non-stabilized azomethine ylide is successfully performed in a flow system. Whereas the use of supported eosin as organic photocatalyst exhibits limited efficiency, turning to the soluble Rose Bengal allows to transform a broad range of substrates from hetarenes (indole, benzofuran, quinoline, pyridine) to naphthalenes and benzenes. This photocatalyzed (3+2) dearomative cycloaddition under green light irradiation provides a simple and efficient access to tridimensional pyrrolidino scaffolds with a tetrasubstituted carbon center at ring junction and can be performed in the friendly ethyl acetate. Computational studies support the mechanism involving azomethine ylide as reactive species toward the electron-poor arene.

Synthesis of cyclic carbonates from CO2 cycloaddition to bio-based epoxides and glycerol: an overview of recent development

Anthropogenic carbon dioxide (CO₂) emissions contribute significantly to global warming and deplete fossil carbon resources, prompting a shift to bio-based raw materials. The two main technologies for reducing CO₂ emissions are capturing and either storing or utilizing it. However, while capture and storage have high reduction potential, they lack economic feasibility. Conversely, by utilizing the CO₂ captured from streams and air to produce valuable products, it can become an asset and curb greenhouse gas effects. CO₂ is a challenging C1-building block due to its high kinetic inertness and thermodynamic stability, requiring high temperature and pressure conditions and a reactive catalytic system. Nonetheless, cyclic carbonate production by reacting epoxides and CO₂ is a promising green and sustainable chemistry reaction, with enormous potential applications as an electrolyte in lithium-ion batteries, a green solvent, and a monomer in polycarbonate production. This review focuses on the most recent developments in the synthesis of cyclic carbonates from glycerol and bio-based epoxides, as well as efficient methods for chemically transforming CO₂ using flow chemistry and novel reactor designs.

Flow photolysis of aryldiazoacetates leading to dihydrobenzofurans via intramolecular C-H insertion

Flow photolysis of aryldiazoacetates 3-5 leads to C-H insertion to form dihydrobenzofurans 6-8 in a metal-free process, using either a medium pressure mercury lamp (250-390 nm) or LEDs (365 nm or 450 nm) with comparable synthetic outcomes. Significantly, addition of 4,4'-dimethoxybenzophenone 9 results in an increased yield and also alters the stereochemical outcome leading to preferential isolation of the trans dihydrobenzofurans 6a-8a (up to 50% yield), while the cis and trans diastereomers of 6-8 are recovered in essentially equimolar amounts in the absence of a photosensitiser (up to 26% yield).

A field guide to flow chemistry for synthetic organic chemists

Flow chemistry has unlocked a world of possibilities for the synthetic community, but the idea that it is a mysterious "black box" needs to go. In this review, we show that several of the benefits of microreactor technology can be exploited to push the boundaries in organic synthesis and to unleash unique reactivity and selectivity. By "lifting the veil" on some of the governing principles behind the observed trends, we hope that this review will serve as a useful field guide for those interested in diving into flow chemistry.

Process Intensification of a Napabucasin Manufacturing Method Utilizing Microflow Chemistry

Microflow chemistry is one of the newest and most efficient technologies used today for the safe and effective production of medicines. In this paper, we show the use of this technology in the development of a manufacturing method for napabucasin, which has potential in the treatment of colorectal and pancreatic cancers. In conventional "batch-type" reactor systems, the generation of side products can be controlled with traditional techniques such as reagent reverse-addition and temperature control. However, there is a limitation to which the yield and purity can be improved by these methods, as both are constrained by the efficiency of heat/mass transfer. Applying microflow chemistry technology alters the parameters of the constraint through the use of precise mixing in a microchannel, which offers increased possibility for improving yields and process intensification of the napabucasin process. Reported herein is a proof-of-concept study for the scale-up production of napabucasin using microflow chemistry techniques for manufacturing at the kilogram scale.

Antimicrobial Evaluation of New Pyrazoles, Indazoles and Pyrazolines Prepared in Continuous Flow Mode

Multi-drug resistant bacterial strains (MDR) have become an increasing challenge to our health system, resulting in multiple classical antibiotics being clinically inactive today. As the de-novo development of effective antibiotics is a very costly and time-consuming process, alternative strategies such as the screening of natural and synthetic compound libraries is a simple approach towards finding new lead compounds. We thus report on the antimicrobial evaluation of a small collection of fourteen drug-like compounds featuring indazoles, pyrazoles and pyrazolines as key heterocyclic moieties whose synthesis was achieved in continuous flow mode. It was found that several compounds possessed significant antibacterial potency against clinical and MDR strains of the Staphylococcus and Enterococcus genera, with the lead compound (9) reaching MIC values of 4 µg/mL on those species. In addition, time killing experiments performed on compound 9 on Staphylococcus aureus MDR strains highlight its activity as bacteriostatic. Additional evaluations regarding the physiochemical and pharmacokinetic properties of the most active compounds are reported and showcased, promising drug-likeness, which warrants further explorations of the newly identified antimicrobial lead compound.

Verification of preparations of (1H-indol-3-yl)methyl electrophiles and development of their microflow rapid generation and substitution

Although highly reactive (1H-indol-3-yl)methyl electrophiles such as (1H-indol-3-yl)methyl halides are potential precursors for the synthesis of various indole derivatives, some researchers have reported difficulties in their preparation due to concomitant undesired dimerization/oligomerization. Nevertheless, there have been some reports on the preparation of (1H-indol-3-yl)methyl halides. To resolve this contradiction, all the previously reported preparations of (1H-indol-3-yl)methyl halides were examined. However, we could not reproduce any of these preparations, and we revised several structures of indole derivatives. Here we show the rapid (0.02 s) and mild (25 °C) generation of an (1H-indol-3-yl)methyl electrophile that enables the rapid (0.1 s) and mild (25 °C) nucleophilic substitution in a microflow reactor. Eighteen unprotected indole analogues can be successfully synthesized using the developed microflow nucleophilic substitution with various nucleophiles.

Will the next generation of chemical plants be in miniaturized flow reactors?

For decades, a production paradigm based on centralized, stepwise, large scale processes has dominated the chemical industry horizon. While effective to meet an ever increasing demand for high value-added chemicals, the so-called macroscopic batch reactors are also associated with inherent weaknesses and threats; some of the most obvious ones were tragically illustrated over the past decades with major industrial disasters and impactful disruptions of advanced chemical supplies. The COVID pandemic has further emphasized that a change in paradigm was necessary to sustain chemical production with an increased safety, reliable supply chains and adaptable productivities. More than a decade of research and technology development has led to alternative and effective chemical processes relying on miniaturised flow reactors (a.k.a. micro and mesofluidic reactors). Such miniaturised reactors bear the potential to solve safety concerns and to improve the reliability of chemical supply chains. Will they initiate a new paradigm for a more localized, safe and reliable chemical production?

Quid Pro Flow

How do you get into flow? We trained in flow chemistry during postdoctoral research and are now applying it in new areas: materials chemistry, crystallization, and supramolecular synthesis. Typically, when researchers think of "flow", they are considering predominantly liquid-based organic synthesis; application to other disciplines comes with its own challenges. In this Perspective, we highlight why we use and champion flow technologies in our fields, summarize some of the questions we encounter when discussing entry into flow research, and suggest steps to make the transition into the field, emphasizing that communication and collaboration between disciplines is key.

Towards Antibiotic Synthesis in Continuous-Flow Processes

Continuous-flow chemistry has become a mainstream process and a notable trend among emerging technologies for drug synthesis. It is routinely used in academic and industrial laboratories to generate a wide variety of molecules and building blocks. The advantages it provides, in terms of safety, speed, cost efficiency and small-equipment footprint compared to analog batch processes, have been known for some time. What has become even more important in recent years is its compliance with the quality objectives that are required by drug-development protocols that integrate inline analysis and purification tools. There can be no doubt that worldwide government agencies have strongly encouraged the study and implementation of this innovative, sustainable and environmentally friendly technology. In this brief review, we list and evaluate the development and applications of continuous-flow processes for antibiotic synthesis. This work spans the period of 2012-2022 and highlights the main cases in which either active ingredients or their intermediates were produced under continuous flow. We hope that this manuscript will provide an overview of the field and a starting point for a deeper understanding of the impact of flow chemistry on the broad panorama of antibiotic synthesis.

Harnessing a Continuous-Flow Persulfuric Acid Generator for Direct Oxidative Aldehyde Esterifications

Persulfuric acid is a well-known oxidant in various industrial-scale purification procedures. However, due to its tendency toward explosive decomposition, its usefulness in organic synthesis remained largely underexplored. Herein, a continuous in situ persulfuric acid generator was developed and applied for oxidative esterification of aldehydes under flow conditions. Sulfuric acid served as a readily available and benign precursor to form persulfuric acid in situ. By taking advantage of the continuous-flow generator concept, safety hazards were significantly reduced, whilst a robust and effective approach was ensured for direct transformations of aldehydes to valuable esters. The process proved useful for the transformation of diverse aliphatic as well as aromatic aldehydes, while its preparative capability was verified by the multigram-scale synthesis of a pharmaceutically relevant key intermediate. The present flow protocol demonstrates the safe, sustainable, and scalable application of persulfuric acid in a manner that would not be amenable to conventional batch processing.

In Situ Quench Reactions of Enantioenriched Secondary Alkyllithium Reagents in Batch and Continuous Flow Using an I/Li-Exchange

We report a practical in situ quench (ISQ) procedure involving the generation of chiral secondary alkyllithiums from secondary alkyl iodides (including functionalized iodides bearing an ester or a nitrile) in the presence of various electrophiles such as aldehydes, ketones, Weinreb amides, isocyanates, sulfides, or boronates. This ISQ-reaction allowed the preparation of a broad range of optically enriched ketones, alcohols, amides, sulfides and boronic acid esters in typically 90-98 % ee. Remarkably, these reactions were performed at -78 °C or -40 °C in batch. A continuous flow set-up permitted reaction temperatures between -20 °C and 0 °C and allowed a scale-up up to a 40-fold without further optimization.

An Automated Computer-Vision "Bubble-Counting" Technique to Characterise CO2 Dissolution into an Acetonitrile Flow Stream in a Teflon AF-2400 Tube-in-Tube Flow Device

A Teflon AF-2400 based tube-in-tube device was used to generate flow streams of CO₂ in acetonitrile and a computer-vision based 'bubble counting' technique was used to estimate the amount of CO₂ that had passed into solution whilst in the tube-in-tube device by quantifying the amount of CO₂ that left solution (forming separate gas-phase segments) downstream of the back-pressure regulator. For both CO₂ pressures used, there appeared to be a minimum residence time below which no CO₂ was observed to leave solution. This was assumed to be due to residual CO₂ below (or close to) the saturation concentration at atmospheric pressure and, by taking this into account, we were able to fit curves corresponding to simple gradient-driven diffusion and which closely matched previously obtained colorimetric titration data for the same system. The estimated value for the residual concentration of CO₂ (0.37 M) is higher than, but in reasonable general correspondence with, saturation concentrations previously reported for CO₂ in acetonitrile (0.27 M).

Inline purification in continuous flow synthesis – opportunities and challenges

Continuous flow technology has become the method of choice for many academic and industrial researchers when developing new routes to chemical compounds of interest. With this technology maturing over the last decades, robust and oftentimes automated processes are now commonly exploited to generate fine chemical building blocks. The integration of effective inline analysis and purification tools is thereby frequently exploited to achieve effective and reliable flow processes. This perspective article summarizes recent applications of different inline purification techniques such as chromatography, extractions, and crystallization from academic and industrial laboratories. A discussion of the advantages and drawbacks of these tools is provided as a guide to aid researchers in selecting the most appropriate approach for future applications. It is hoped that this perspective contributes to new developments in this field in the context of process and cost efficiency, sustainability and industrial uptake of new flow chemistry tools developed in academia.

Visible-light-mediated decarboxylative (E)-alkenylation of aliphatic carboxylic acids with aryl styryl sulfones under metal-free conditions

The decarboxylative alkenylation of aliphatic carboxylic acids with aryl styryl sulfones is efficiently catalyzed by riboflavin tetraacetate under visible light irradiation at room temperature. This metal-free protocol is cost-efficient, environmentally friendly and provides the corresponding olefins with excellent (E)-diastereocontrol. The methodology can also be used to prepare internal alkynes regioselectively by using alkynyl sulfones as radical acceptors. The suitability as building blocks of the olefins obtained was demonstrated by performing an (E)- to (Z) photoisomerization, an iron-catalyzed allylic substitution of the phenoxy group derived from the 2-phenoxycarboxylic acid substrates, as well as syn-epoxidations, and diastereoselective intramolecular iodoarylations. Based on control experiments and DFT calculations, we proposed a reaction mechanism that accounts for the regio- and diastereo-selectivity observed.

Multicomponent Direct Assembly of N-Heterospirocycles Facilitated by Visible-Light-Driven Photocatalysis

N-heterospirocycles are interesting structural units found in both natural products and medicinal compounds but have relatively few reliable methods for their synthesis. Here, we enlist the photocatalytic generation of N-centered radicals to construct β-spirocyclic pyrrolidines from N-allylsulfonamides and alkenes. A variety of β-spirocyclic pyrrolidines have been constructed, including drug derivatives, in moderate to very good yields. Further derivatization of the products has also been demonstrated as has a viable scale-up procedure, making use of flow chemistry techniques.

Process intensification in continuous flow organic synthesis with enabling and hybrid technologies

Industrial organic synthesis is time and energy consuming, and generates substantial waste. Traditional conductive heating and mixing in batch reactors is no longer competitive with continuous-flow synthetic methods and enabling technologies that can strongly promote reaction kinetics. These advances lead to faster and simplified downstream processes with easier workup, purification and process scale-up. In the current Industry 4.0 revolution, new advances that are based on cyber-physical systems and artificial intelligence will be able to optimize and invigorate synthetic processes by connecting cascade reactors with continuous in-line monitoring and even predict solutions in case of unforeseen events. Alternative energy sources, such as dielectric and ohmic heating, ultrasound, hydrodynamic cavitation, reactive extruders and plasma have revolutionized standard procedures. So-called hybrid or hyphenated techniques, where the combination of two different energy sources often generates synergistic effects, are also worthy of mention. Herein, we report our consolidated experience of all of these alternative techniques.